Tender For Special Repairs To Doors And Windows,Flooring, Water Supply & Sanitary Arrangements In Exam Hall Building , Faculty Block Building , 125 Students Lecture Hall And 400 Students Lecture Hall In Government Medical College At Thiruvarur In Thi
Tender Value
19.58 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
13 days left
EMD
19600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvarur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Doors And Windows,Flooring, Water Supply & Sanitary Arrangements In Exam Hall Building , Faculty Block Building , 125 Students Lecture Hall And 400 Students Lecture Hall In Government Medical College At Thiruvarur In Thiruvarur District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 2 | Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs |
| 3 | Doors & windows including removal of frames, hinges and fastenings |
| 4 | Clean removal of Cement plaster from walls |
| 5 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 6 | Plain Ceramic Tiles of size 305 x 305 x 6mm |
| 7 | Paving the floor with fine polished cuddapah stone slab of following thickness over cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc.,complete complying with standard speicification and as directed by the departmental officers. (The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) - Cuddapah Slab of 20 to 30mm thick / 38 to 40mm thick / 50mm thic |
| 8 | Slab of 20 to 30mm thick / 38 to 40mm thick / 50mm thick |
| 9 | Supplying , fabricating and fixing in position Aluminium Anodised natural colour matt finish Three track sliding window in all floors with Aluminium sections of Outer Frame bottom [email protected] kg/m,Top & vertical 92.34x29.70x1.50 at 1.066 kg/m, Shutter vertical 39x20x1.50 at 0.493 kg/m,Top & Bottom 18x36.6x1.50 at 0.439 kg/m,Vertical locking arrangement 28.94x39x1.50at0.632 kg/m, the follwing sizes with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication , drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers.The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average anodic film thickness 15 microns etc., complete. |
| 10 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 11 | Without Pedestal |
| 12 | Supplying and installing good quality and approved make RO water purifier of 20 liters per hour. This RO removes harmful dissolved impurities, UV/UF totally kills Bacteria and Viruses & patented TDS controller ensures that essential natural minerals are retained. As a results we get the purest water possible. It consist one number of sediment filter, one number of activate filter and one number of carbon black sediment filter situated vertically and one membrane is on the top situated horizontally. The warranty period for this plant is one year. The charges inclusive of plant, plumbing works, erection charges and conveyance to work site excluding GST etc complete. |
| 13 | Supplying and fixing of PVC Sliding Door with Roller |
| 14 | Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] |
| 15 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 16 | SD Tap |
| 17 | Swan Neck Tap |
| 18 | Supplying and fixing position CI Nahani Trap / Floor Trap of size 100 x 75mm with stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 19 | Cast Iron Nahani Trap of size 100 x 75mm with stainless steel gratings |
| 20 | Supplying and Fixing in position steel glazed Ventilators with central hung swing shutter using F7D section of size 30x25x3mm for inner outer froames with 4 Nos. Of 12mm dia MS sq.bars for protection and 2 Numbers of clamps welded with outer frame and using 3mm thick pin headed glass for panel including painting with one coat of Red Oxide Primer dismantling the masonry wherever necessary for fixing the ventilator and redoing the same to the original condition fixing the ventilator and redoing the same to the original condition fixing the ventilator in position etc. complete complying with standard specification and as directed by the departmental officers. |
| 21 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use |
| 22 | Supplying and fixing in position of best approved quality of white glazed European Water closet with P or S trap and with ISI mark The cost is include of double flapped PVC seat cover, PVC pipe 110mm dia and all internal fittings and with necessary CI Brackets 12 mm brass nipple 15mm dia chromium plated broiwn headed stop cock of approved quality with ISI mark and nylon connection including fixing the same to wall and giving necessary water supply connection to the European water closet with 10 lits., capacity porcelin low level flushing Tank with all internal fittings. The European water closet should be fixed on the floor using counter sunk bolts and nuts and necessary teakwood plugs, clamps, screws etc., including dismantling the floor or wall wherever necessary and redoing the same to their original condition etc., complete complying with standard specifications.[The water closet and other materials should be got approved by the Executive Engineer before use on works] |
| 23 | Tile joint Re-filling. Cleaning the surface to be freed of dust and fungus with wire brush and cutting the tile joint with \\"U\\" grew, cleaning the joint to be freed of dustwith air blower machine. Apply of bonding agent coating and fillin the \\"U\\" grew with chemical mixed material (SSR Latex, Integrated water proofing liquid and powder, fibre, nice sand and cementmixed material). Apply of tile joint with water proof painting two coats with safe secured coat. Flex coating. Highly performance water proof memberance coating and apply of two coatings to the entire surface including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 24 | Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of double leaves door with half panelled with 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 01.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section-Vertical &Top rail: 50x44.45x2.50mm @ 1.292 kg/m and Bottom rail : 100 x 44.45 x 2.50mm @ 1.974 kg /m , Lock rail: 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/m Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 2 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 2Nos .,lock-1No., Door stopper with rubber bush including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc. complete complying with standard specification and as directed by the deparmental officers.. All the Alu. sections are to be anodised with matt finish under electically contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. |
| 25 | Double leaf With Automatic Door Closure and Hinges |
| 26 | Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level / Below ground level. External Water Supply - Above Ground Level |
| 27 | External Water Supply - Above Ground Level 32mm dia UPVC pipe |
| 28 | 25mm dia UPVC pipe |
| 29 | 20 mm dia UPVC pipe |
| 30 | Supplying and fixing in position UPVC Specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to walls and giving connections to the PVC soil stacks pipes, dismantling the brick masonry or RCC works redoing the dismantled portion to original condition etc.,complete complying with standard specification. and as directed by the departmental officers. (The UPVC specials should be got approved by the Executive Engineer before use on works) |
| 31 | 32 mm dia UPVC union |
| 32 | 32 mm dia UP VC Tee |
| 33 | 32 mm dia UPVC Bend |
| 34 | 32X25 mm dia UPVC reducer |
| 35 | 25mm dia UPVC Elbow |
| 36 | 25mm dia UPVC union |
| 37 | 25mm dia UPVC Tee |
| 38 | 25mm dia UPVC Bend |
| 39 | 25X20 mm dia UPVC reducer |
| 40 | 20mm dia UPVC union |
| 41 | 20mm dia UPVC Tee |
| 42 | 20mm dia UPVC Bend |
| 43 | 20X15 mm dia UPVC reducer |
| 44 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 45 | 160 mm dia PVC soil waste Pipe |
| 46 | 110 mm dia PVC soil waste Pipe |
| 47 | 75mm dia PVC soil waste Pipe |
| 48 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works) |
| 49 | 160mm dia PVC Elbow |
| 50 | 160mm dia PVC Elbow with Door |
| 51 | 160mm dia PVC Tee |
| 52 | 160mm dia PVC Tee with Double Door |
| 53 | 160mm dia PVC Bend |
| 54 | 110mm dia PVC Elbow |
| 55 | 110mm dia PVC Elbow with Door |
| 56 | 110mm dia PVC Tee |
| 57 | 110mm dia PVC Tee with Double Door |
| 58 | 110mm dia PVC Bend |
| 59 | 75mm dia PVC Elbow |
| 60 | 75mm dia PVC Elbow with Door |
| 61 | 75mm dia PVC Tee |
| 62 | 75mm dia PVC Tee with Double Door |
| 63 | 75mm dia PVC Bend |
| 64 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 65 | 32mm dia Gun Metal Gate Valve |
| 66 | 25mm dia Gun Metal Gate Valve |
| 67 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 68 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 69 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 70 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 71 | Add GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender