Tender For Integrated Development Of Basic Facilities For Devotees At Arulmigu Sangameshwarar Temple Bhavani Erode District
Tender Value
2.54 Crore
Estimated cost
Bid Submission
26 Nov 2026
12 days left
EMD
1.44 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Integrated Development Of Basic Facilities For Devotees At Arulmigu Sangameshwarar Temple Bhavani Erode District
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for foundation in all soils and sub soils and to full depth as may be directed except in, Hard rock requiring blasting, but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed watered consolidated and depositing the surplus earth within the compound in places as shown by the departmental officers with an initial lead, and lift etc., complete complying with standard specifications. ( Narrow foundation) |
| 2 | Supplying and filling in foundation and basement with M sand in layers of not more than 15cm.thick well rammed watered and compactedetc., complete complying with standard specification. |
| 3 | Filling in foundation and basement with Excavated Earth in layers of not more than 15cm.thick well rammed watered and compactedetc., complete complying with standard specification. |
| 4 | Providing and laying Plain Cement concrete of 1:5:10 ( one cement Five M sand and Ten aggregate) using 40mm HBGS jelly (well graded) confirming to IS specified grading (to produce concrete of the specified grading and characteristic strength of 10N/mm2 at 28 days) and mixing the ingredients by mixer machine including dewatering by bailing/pumping wherever necessary laying the concrete in layers and in bays with all leads and lifts, compacting and finishing the surface, watering, curing etc.,complete complying with standard specifications and as directed by the departmental officers for( FOUNDATION BASE COURSE) |
| 5 | Supplying and erecting Steel shuttering including necessary supports for Plane Surfaces in foundation and basement for reinforced cement concrete works such column footings, plinth beam, Grade beam, Stair Case steps, bed blocks etc., which requires only nominal strutting using stiffened with mild steel sheets of suitable size 90cm x60cm and BG 10 stiffened with mild steel angles of size mm of 25mm x 25mm x 3 mm for boardinglaid over silver oak joists of size 10cm x 6.50 cm spaced at about 60 cm centre to centre and supported by the casurina props of 10 cm to 13 cm dia paced at 75 cm centre to centre or at suitable intervals etc., complete |
| 6 | Brick work in following Cement Mortar for the following Clay using best burnt bricks of size 9\\" x 4-3/8\\" x 2-3/4\\" with class desingnation of 7.5 Gf with for foundation, basement& superstructures including curing etc.,complete complying with standard specification. |
| 7 | For basement in cm 1: 5 |
| 8 | For super structure in G.F CM 1:6 |
| 9 | Brick partition walls of 11.50cm thickness using best clay burnt bricks of size 9\\" x 4-3/8\\" x 2-3/4\\" with class desingnation of 7.5 Gf in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforCement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforCement will be measured and paid for separately) |
| 10 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). Data No:144 |
| 11 | Plane surface Roof Beam ,Lintel Beam Etc |
| 12 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). Data No 148 |
| 13 | Plansurface RCC column |
| 14 | Providing and laying in position, standardised Reinforced cement concrete Mix M-20 Grade(Design mix) in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with above (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing,etc., complete complying with standard specification and as directed by the departmental officers. |
| 15 | Below GL up to 1.50m |
| 16 | Below GL up to 1.50m-4.50m |
| 17 | Above GL Up to 4.50m |
| 18 | Supply and fabricating of steel required for all RCC works involced in the schedule including cost of steel ,cost of fabrication,labour charges for cleaning the rods straightening, cutting, bending,tying grills including over lapping to the required length wheenever necessary and placing reinforcement in position as specified in the drawing including cost of binding wire provision for spacer bar cover blocks and all other incidental charges etc., directed by the departmental officers. |
| 19 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 20 | Paving the floor with best quality Vitrified Tiles 600x600x 10mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 21 | Dadooing walls with following best approved quality, white / colour glazed tiles of sizes 300mm x 600mm x 8mm and set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 22 | Supplying, and fixing M.S. GRILLS for open courtyard grill, grill work to doors, windows and ventilators etc, using 16mm squre bar which should be fixed or welded to masonry or column including necessary dismantling or making holes and redoing the same to original condition as directed by the departmenta officers inclusive of cost of providing one coat of best quality red oxide primer completre complying with standard specifications. |
| 23 | Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors complying with standard specifications and as directed by the departmental officers. |
| 24 | Supplying and fixing best Qulality CW Scantlings ( below 3m in length) - Malabar wood used in door frame including Labour wrought and put up in position of frames inclusive of fixing holdfasts for doors, etc. The teak wood should be got approved from the Executive Engineer before useon work.complete complying with standard specification |
| 25 | Maufacturing supplying and fixing in position solid core medium density Fibre board ( Exterior grade) FLUSH SHUTTERS of nominal thickness of 35mm single or double shuutters of any size, conforming to I.S. 12406 with necessary rebate cutting, external lipping all round with Teakwood and including cost of required Aluminium anodized furniture fittings with I.S.I. mark, wind appliances, labour charges, fixing the furniture fittings with necessary aluminium or choromium plated screws and the shutters fixed to frame in position etc., complete . |
| 26 | Painting two coats of newly plastered wall inner surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 27 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over Cement plastered wall surface ect., complete complying with standard specification. |
| 28 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 29 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 30 | Supplying and fixing in position white / glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 31 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 32 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 33 | Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) |
| 34 | Providing and fixing 30mm thick Factory made solid panel P.V.C. DOOR shutter WITH DOOR FRAME conforming to I.S. 4020 with up to date amendments consisting of shutter frame made out of M.S. tubes of 19 gauge thick and size of 19mm x 19mm for styles and 15mm x 15mm for top and bottom rails, M.S. frames shall have a coat of steel primer of approved make and manufacture. M.S. frames shall be covered with 5mm thick heat moulded P.V.C. 'C' channel of size 30 x 75mm for styles, 30 x 75mm for top, rail lock, rail bottoml. On either side 2 Nos.of 5mm thick, 20mm wide cross PVC sheet shall be provided as gap insert for for top rail and bottom rail. Panelling of 5mm thick PVC sheet to be fitted within the M.S. frame welded/ sealed to the styles and rails with 30mm wide 5mm thick PVC sheet beadings on either side and joined together with solvent Cement adhesive shall be rigidly fixed in position including necessary furniture fittings. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' channel using PVC solvent adhesive complete complying with standard specification and asdirected by the departmental officers. PWD-M-0391 |
| 35 | Providing, erecting and fixing of all type Steel Rectangular hollow section of different sizes and thicknes of all roof works. All steel fabrication works & All welding works are strictly followed in IS code as mention in the approved drawing. The cost includes cost of all materials, process charges like gas cutting, welding, machining, scaffolding charges, labour charges for dismantling, loading, lifting, unloading, transport, erection, labour charges for equipments like crane, chain pulley block, power charges from generator, risk allowance for working at a height of more than 3m, conveyance to site and clearing them after completion of work complete and as directed by the departmental officers |
| 36 | Supplying and fixing Best Quality Mangalore Tiles (I class A) over best Quality ceiling tiles 200x200x20mm over Steel rafters for all aroung Existing teple building The cost includes cost of all materials, scaffolding charges, etc complete. The Mangalore tiles and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. and as directed by the departmental officers |
| 37 | Painting new iron works Two coats such as steel doors, windows, ventilators, window bar balustrades and all steel members etc., with best approved first quality synthetic enamel paint of approved colour with red oxide priming coat in all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification -Paint should be got approved by the Executive Engineer before use on work |
| 38 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete |
| 39 | Supplying and fixing in position \\"PVC Soil pipes\\" of pressure - 6kg / cm2 of the following best approved quality and make conforming to ISS of the following diameter and providing leak proof joints with cement, spun yarn etc., including fixing the wall with necessary teak wood plugs, brass screws, mild steel clamps etc., and giving connections to all sanitary fittings including dismantling brick masonry, RCC floor or roof slab etc., wherever necessary and redoing the disturbed porition to the original condition including painting the cast iron pipes and fitting with two coats of anti-corrossive paint etc., complete complying with standard specifications- Below Ground Level |
| 40 | 110mm dia PVC pipe |
| 41 | 75mm dia PVC pipe |
| 42 | Supplying, laying and jointing PVC pipes (having working pressure 6 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws 33 making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Data No 673 Below GL |
| 43 | 110mm dia PVC Elbow |
| 44 | 110mm dia PVC plain bend |
| 45 | 110mm dia PVC Tee |
| 46 | 75 mm dia PVC Elbow |
| 47 | 75 mm dia PVC plain Bend |
| 48 | 75 mm dia PVC Tee |
| 49 | Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on |
| 50 | 50mm dia pipe |
| 51 | 32mm dia pipe |
| 52 | 25mm dia pipe |
| 53 | 15mm dia pipe |
| 54 | supplying and fixing in position UPVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the UPVC pipes dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The UPVC specials should be got approved by the Executive Engineer before use on works)Above ground level. |
| 55 | 50mm dia |
| 56 | Elbow |
| 57 | Union |
| 58 | Hex Nipple |
| 59 | 32mm dia |
| 60 | Elbow |
| 61 | Union |
| 62 | Hex Nipple |
| 63 | 25mm dia |
| 64 | Elbow |
| 65 | Union |
| 66 | Hex Nipple |
| 67 | 15mm dia |
| 68 | Elbow |
| 69 | Union |
| 70 | Supplying and fixing in position best quality and approved varity with ISI mark Gun Metal Gate Valve / Wheel Value of the following dia including necessary charges for cutting and threading of GI Pipes for jointing the gate valve in position etc., complete complying with standard specification |
| 71 | 50mm dia GM Gate Valve |
| 72 | 32mm dia GM Gate Valve |
| 73 | 25mm dia GM Gate Valve |
| 74 | Supplying and fixing in position SS Heavy Duty Long Body Tap 15mm (heavy duty) 37 of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification |
| 75 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 1000x780mm 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 76 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 39 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 77 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 78 | Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 79 | Electrical Works |
| 80 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Lower End (Data- A) |
| 81 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Lower End (Data- B) |
| 82 | Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end) (Data C) |
| 83 | Supply and fixing of 20W LED Mirror light fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)(Data D) |
| 84 | Supply and fixing of Water tight Bulkhead fitting with Guard suitable with 9W/7W LED Bulb (SD 84) |
| 85 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm fan down rod on exisitng fan clamp (SD 498) |
| 86 | Supply and fixing of 300mm (12\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall(SD 114) |
| 87 | Supply and fixing of louvers shutters arrangements for 300mm (12\\") sweep (light duty) AC exhaust fan(SD 120) |
| 88 | supply and fixing of 30W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .(SD-445) |
| 89 | supply and fixing of 65 mm dia. (2 -1/2\\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Lower end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .(SD 457) |
| 90 | Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Lower End(SD 384) |
| 91 | Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Lower End (SD-402) |
| 92 | Design, Supply, erection, Testing, Commissioning and handing over of Mini Mast Structure (Bajaj / Philips / Crompton make or equivalent) with required number of continuously tapered hot dip galvansied steel polygonal side sections with telescopic strip joints to a total of 12 meters capable of |
| 93 | Supply and fixing of 16A - 32A DP MCB with sheet steel enclosure on wall with earth connection (Lower end)Data E |
| 94 | Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 4 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. (Lower End)DATA F |
| 95 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End SD 506 |
| 96 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion(SD-337) |
| 97 | Supply and Laying of 2 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(Data G) |
| 98 | Supply and clamping of 2x10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD 194) |
| 99 | Supply and fixing of brass cable gland for 2x10 sq.mm. PVC armoured LTUG cable with earth connection (SD 160) |
| 100 | Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth (SD 78) |
| 101 | Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. (SD-212) |
| 102 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.(SD-371) |
| 103 | SUPPLY OF 5.4 HEIGHT SINGLE-ARM SIMPLE BRACKET CAST-IRON HERITAGE LIGHTING POST- JM.01.24.033 5.45M height Single arm Pole Made in combination of mild steel pipe section 114mm dia. & Kuma design bracket made in combination of mild steel pipe sections 60mm dia.(straight), gradually bent 42mm dia., to get 770 mm horizonal arm length & pleasing aesthetics. MS Pipe grade of YST 240 grade as per IS 1161-2014. Arch. Base (Castore) design starts with 380mm(L&W)x130mm(H) Octogonal section which is followed by a decorative tapering section(with aesthetically pleasing different designs integrated) (bottom-370mm & top-270mm), |
| 104 | SUPPLY OF 51W LED POST-ROTO SYMMETRIC 3000K- Model Light 21-51W-3000K- (Suspended Type) Light 21:Upper frame with threaded coupling G3/4\\"\\" for suspended mounting at the top,made of die cast aluminum using pressure die- casting process in single piece.Bottom frame composed by a ring with Company /brand name engraved in the mold,made of die cast aluminum using pressure die-casting process in single piece. Auxiliary and optical compartment can be accessed by opening the frames. Drop shaped screen in polymethylmethacrylate (PMMA), transparent. Shock resistance IK06 made in single piece by injection moulding process. Pure polyester powder coating in Customized Metallic Grey Colour. Silicone gasket between the upper and lower frames ensures IP Rating - IP 66. Height – 545mm,Diameter - 550mm,Weight - 7.5Kgs., Area Exposed to Wind(S) - 0.135m2 Power LED Module with Company /brand name printed on PCB with the metal core plate.LED Chips of CREE/NICHIA/OSRAM/LUMILEDS make - same should be supported by LED manufacturer's tech sheet . |
| 105 | SUPPLY OF 51W LED POST- ASYMMETRIC 3000K- Model Light 21-51W-3000K- (Suspended Type) Light 21:Upper frame with threaded coupling G3/4\\"\\" for suspended mounting at the top,made of die cast aluminum using pressure die- casting process in single piece.Bottom frame composed by a ring with Company /brand name engraved in the mold,made of die cast aluminum using pressure die-casting process in single piece. Auxiliary and optical compartment can be accessed by opening the frames. Drop shaped screen in polymethylmethacrylate (PMMA), transparent. Shock resistance IK06 made in single piece by injection moulding process. Pure polyester powder coating in Customized Metallic Grey Colour. Silicone gasket between the upper and lower frames ensures IP Rating - IP 66. Height – 545mm,Diameter - 550mm,Weight - 7.5Kgs., Area Exposed to Wind(S) - 0.135m2 Power LED Module with Company /brand name printed on PCB with the metal core plate.LED Chips of CREE/NICHIA/OSRAM/LUMILEDS make - same should be supported by LED manufacturer's tech sheet . |
| 106 | GST Amount for providing Service to Government Contract Works for the above works at 18%(9%+9%). {GST Amount is the Total GST Amount for overall quoted amount} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender