Water Resources and Irrigation Government Departments Closing in 19 days TDR #58467648

Tender For Operation And Maintenance Of The 7 Nos Of Cwss In Ariyalur District (Pkg-27 B), Including Repair, Rectification Works And Supply Of Chemicals For The Period From 01.01.2027 To 31.03.2029

Issued by Government Departments · Ariyalur, Tamil Nadu
Tender Value
14.24 Crore
Estimated cost
Bid Submission
07 Dec 2026
19 days left
EMD
10.68 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ariyalur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Operation And Maintenance Of The 7 Nos Of Cwss In Ariyalur District (Pkg-27 B), Including Repair, Rectification Works And Supply Of Chemicals For The Period From 01.01.2027 To 31.03.2029

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 17-Nov-2026 Amendment slip 2 BOQ 07-Dec-2026

BOQ

Name of Work:- Operation and maintenance of the 7 nos of CWSS in Ariyalur District (Pkg-27 B), including repair, rectification works and supply of Chemicals for the period from 01.01.2027 to 31.03.2029
Sl. No. Item Description
1Operation and maintenance of the 7 nos of CWSS in Ariyalur District (Pkg-27 B), including repair, rectification works and supply of Chemicals for the period from 01.01.2027 to 31.03.2029
2CWSS to T.Palur and 212 Habitations in T.Palur union in Ariyalur District.
3CWSS to Nathiyanur and 20 other Habitations in Thirumanur,and Ariyalur union of Ariyalur District
4CWSS to 29 Habitations in Thirumanur Union of Ariyalur District
5CWSS to Jayankondam Mpty, Udayarpalayam TP (New Scheme) in Ariyalur District
6CWSS to Jayankondam Mpty, Udayarpalayam TP and 5 other way side Habitations (Old Scheme) in Ariyalur District
7CWSS to 227 habitations in Andimadam union, 13 wayside habitations in Jayankondam union and 10 habitations in Thirumanur union in Ariyalur District
8CWSS TO 281 HABITATIONS IN JAYANKONDAM UNION OF ARIYALUR DISTRICT.
9Total Basic Value
10GST @ 18%
11For the Year 2026-2027 (From 01.01.2027 to 31.03.2027)
12Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
13Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
14Repairing and reconditioning of 15.0 HP Submersible Pumpset including all material,labour,etc at
15Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
16Transporting the pumpset .
17Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
18Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
19Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
20Repairing and reconditioning of 25.0 HP HSC Motor including all material,labour,etc at
21Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
22Transportation charges for conveying the motor including loading and unloading charges.
23Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
24Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
25Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
26Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
27Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
28Repairing and reconditioning of 50 HP HSC Motor including all material,labour,etc at
29Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
30Transportation charges for conveying the motor including loading and unloading charges.
31Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
32Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
33Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
34Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
35Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
36Repairing and reconditioning of 25.00 HP HSC Pump including all material,labour,etc at
37Charges for removing and Reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
38Transportation charges for conveying the Pump assembly including loading and unloading charges.
39Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
40Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
41Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
42Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
43Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
44Supply and delivery of Driven End and Non Driven End bearings
45Repairing and reconditioning of 50 HP HSC Pump including all material,labour,etc
46Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
47Transportation charges for conveying the Pump including loading and unloading charges.
48Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
49Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
50Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
51Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
52Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
53Supply and delivery of Driven End and Non Driven End bearings
54Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc
55Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
56Transportation charges for conveying the motor including loading and unloading charges.
57Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
58Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
59Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
60Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
61Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
62Repairing and reconditioning of 20 HP HSC Pump including all material,labour,etc
63Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
64Transportation charges for conveying the Pump assembly including loading and unloading charges.
65Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
66Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
67Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
68Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
69Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
70Supply and delivery of Driven End and Non Driven End bearings
71Repairing and reconditioning of 2 HP OW Submersible Pumpset including all material,labour,etc
72Transporting the pumpset .
73Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
74Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
75Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
76Repairing and reconditioning of 3 HP OW Submersible Pumpset including all material,labour,etc
77Transporting the pumpset
78Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
79Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
80Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
81Repairing and reconditioning of 10 HP OW Submersible Pumpset including all material,labour,etc
82Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
83Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
84Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
85Transporting charges for Submersible pumpset
86Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
87Repairing and reconditioning of 1 HP OW Submersible Pumpset including all material,labour,etc
88Transporting the pumpset
89Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
90Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
91Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
92Repairing and reconditioning of 5 HP OW Submersible Pumpset including all material,labour,etc
93Transporting the pumpset
94Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
95Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
96Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
97Repairing and reconditioning of 7.5 HP OW Submersible Pumpset including all material,labour,etc
98Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
99Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
100Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
101Transporting charges for Submersible pumpset
102Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
103Repairing and reconditioning of 20HP OW Submersible Pumpset including all material,labour,etc
104Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
105Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
106Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
107Transporting charges for Submersible pumpset
108Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
109Repairing and reconditioning of 12.5 HP OW Submersible Pumpset Bore Well
110Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
111Transporting the pumpset.
112Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
113Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
114Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
115Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
116Repairing and reconditioning of ATS Starter 15.0 HP
117Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete., and as directed by TWAD Board officers.
118Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
119Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
120Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
121Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
122Repairing and reconditioning of ATS 30.0 HP
123Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
124Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
125Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
126Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
127Supply and Delivery of PLA Safety Relay suitable for the starter
128Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
129Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
130Repairing and reconditioning of ATS Starter 50 HP
131Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
132Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
133Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
134Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
135Supply and Delivery of PLA Safety Relay suitable for the starter
136Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
137Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
138Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
139Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
140Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
141Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
142Repairing and reconditioning of ATS Starter 20 HP
143Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
144Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
145Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
146Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
147Supply and Delivery of PLA Safety Relay suitable for the starter
148Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
149Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
150Repairing and reconditioning of ATS Starter 25 HP
151Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
152Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
153Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
154Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
155Supply and Delivery of PLA Safety Relay suitable for the starter
156Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
157Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
158Repairing and reconditioning of Star-delta Starter 10 HP
159Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
160Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
161Supply and Delivery of PLA Safety Relay suitable for the starter
162Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
163Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
164Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
165Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
166Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
167Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
168Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
169Repairing and reconditioning of Star-delta Starter 20 HP
170Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
171Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
172Supply and Delivery of PLA Safety Relay suitable for the starter
173Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
174Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
175Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
176Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
177Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
178Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
179Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
180Repairing and reconditioning of Star-delta Starter 12.5HP
181Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
182Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
183Supply and Delivery of PLA Safety Relay suitable for the starter
184Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
185Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
186Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
187Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
188Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
189Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
190Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
191Repairing and reconditioning of Star-delta Starter 7.5HP
192Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
193Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
194Supply and Delivery of PLA Safety Relay suitable for the starter
195Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
196Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
197Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
198Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
199Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
200Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
201Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
202Repairing and reconditioning of DOL Starter 5 HP
203Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
204Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
205Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
206Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
207Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
208Repairing and reconditioning of DOL Starter 3 HP
209Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
210Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
211Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
212Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
213Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
214Repairing and reconditioning of DOL Starter 2 HP
215Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
216Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
217Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
218Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
219Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
220Repairing and reconditioning of DOL Starter 1 HP
221Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
222Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
223Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
224Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
225Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
226Attending cable fault with replacing of cable at Headworks infiltration well to Collection sump
227PVC Insulated 3 core flat type copper cable-10 sq.mm
228Supply and delivery fixing of the following Electrical works:consumable items at the site of work carry out the general maintenance works
229Volt meter SR 96 600 V-AC
230Ammeter SR 96 5D/5A C.T.operated-AC
231LED Outdoor fittings a)30 W LED street light fittings
232Supply and delivery fixing of Moulded case circuit breaker (MCCB) with thermo magneticRelease 100 AMPS 3 Pole
233Supply and delivery fixing of Moulded case circuit breaker (MCCB) with thermo magneticRelease 125 AMPS 3 Pole
234Supply and delivery fixing of Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
235Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
236PVC/HDPE/AC/PSC - Minor Burst
23750mm 6 ksc PVC Pipes
23863mm 4 ksc PVC Pipes
23975mm 4 ksc PVC Pipes
24090mm 4 ksc PVC Pipes
241110mm 4 ksc PVC Pipes
242140mm 4 ksc PVC Pipes
243160mm 4 ksc PVC Pipes
24463 HDPE PN 6 Pipe
24575 HDPE PN 6 Pipe
24690 HDPE PN 6 Pipe
247110 HDPE PN 6 Pipe
248140 HDPE PN 6 Pipe
249150mm AC pipe
250200mm AC pipe
251250mm AC pipe
252350mm PSC pipe
253400mm PSC pipe
254GI - Above GL
255125 GI
256100 GI
25780 GI
25865 GI
25950 GI
260AC/PSC -Supply of MS Pipe with collar
261150mm AC pipe
262200mm AC pipe
263250mm AC pipe
264350mm PSC pipe
265400mm PSC pipe
266PVC/HDPE/AC/PSC - Major Burst
26750mm 6 ksc PVC Pipes
26863mm 4 ksc PVC Pipes
26975mm 4 ksc PVC Pipes
27090mm 4 ksc PVC Pipes
271110mm 4 ksc PVC Pipes
272140mm 4 ksc PVC Pipes
273160mm 4 ksc PVC Pipes
27463 HDPE PN 6 Pipe
27575 HDPE PN 6 Pipe
27690 HDPE PN 6 Pipe
277110 HDPE PN 6 Pipe
278140 HDPE PN 6 Pipe
279150mm AC pipe
280200mm AC pipe
281250mm AC pipe
282350mm PSC pipe
283400mm PSC pipe
284MS - Above GL
285350mm MS
286400mm MS
287MS - Below GL
288250mm MS
289Repair and Reconditioning of the Double Air Valve / Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
290100mm CI Sluice Valve
291150mm CI Sluice Valve
29250mm DI Single Chamber Air release Valve
29380mm DI Single Chamber Air release Valve
294100mm DI Single Chamber Air release Valve
295Replacement of Gun Metal Gate Valve including required length of GI nipple , Coupling etc complete
29650 mm GM Gate valve
29780 mm GM Gate valve
298Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
2994.00 LL capacity of Collection sump @ Arankottai HW
3004.00 LL capacity of sump @ Sripuranthan BS
3012.00 LL capacity of sump @T. Palur BS
3020.60 LL capacity of sump @ Sathambadi
3030.60 LL capacity of sump @ Karaikurichy
3041.00 LL capacity of sump @ Vikkaramangalam BS
3050.60 LL capacity of sump @ Keelanatham
3060.30 LL capacity of sump @ Gunamangalam
3071.00 LL capacity of sump @ Venmankondam
3080.30 LL capacity of sump @ Uilliyakudi
3090.10 LL capacity of sump @ Periyar Nagar
3100.60 LL capacity of sump @ Saveriyarpatty
3110.30 LL capacity of sump @ Arulmohzli
3120.30 LL capacity of sump @ Cholamadevi
3130.30 LL capacity of sump @ Ayeepalayam
3140.30 LL capacity of sump @ Kodalikaruppur
3150.30 LL capacity of sump @ Anaikudam
3160.60LL capacity of sump @ Keela Mickelpatty
3171.00 LL capacity of sump @ Kandiyankollai
3180.60 LL capacity of sump @ Sundaresapuram
3190.60 LL capacity of sump @ Payayankarai
3201.00 LL capacity of sump @ Kottiyal
3210.60 LL capacity of sump @ Kasankottai
322Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
323For the Year 2027-2028 (From 01.04.2027 to 31.03.2028)
324Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
325Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
326Repairing and reconditioning of 15.0 HP Submersible Pumpset including all material,labour,etc
327Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
328Transporting the pumpset .
329Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
330Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
331Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
332Repairing and reconditioning of 25.0 HP HSC Motor including all material,labour,etc
333Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
334Transportation charges for conveying the motor including loading and unloading charges.
335Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
336Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
337Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
338Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
339Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
340Repairing and reconditioning of 50 HP HSC Motor including all material,labour,etc at
341Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
342Transportation charges for conveying the motor including loading and unloading charges.
343Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
344Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
345Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
346Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
347Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
348Repairing and reconditioning of 25.00 HP HSC Pump including all material,labour,etc
349Charges for removing and Reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
350Transportation charges for conveying the Pump assembly including loading and unloading charges.
351Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
352Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
353Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
354Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
355Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
356Supply and delivery of Driven End and Non Driven End bearings
357Repairing and reconditioning of 50 HP HSC Pump including all material,labour,etc
358Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
359Transportation charges for conveying the Pump including loading and unloading charges.
360Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
361Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
362Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
363Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
364Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
365Supply and delivery of Driven End and Non Driven End bearings
366Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc
367Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
368Transportation charges for conveying the motor including loading and unloading charges.
369Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
370Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
371Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
372Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
373Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
374Repairing and reconditioning of 20 HP HSC Pump including all material,labour,etc
375Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
376Transportation charges for conveying the Pump assembly including loading and unloading charges.
377Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
378Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
379Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
380Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
381Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
382Supply and delivery of Driven End and Non Driven End bearings
383Repairing and reconditioning of 2 HP OW Submersible Pumpset including all material,labour,etc
384Transporting the pumpset .
385Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
386Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
387Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
388Repairing and reconditioning of 3 HP OW Submersible Pumpset including all material,labour,etc
389Transporting the pumpset
390Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
391Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
392Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
393Repairing and reconditioning of 10 HP OW Submersible Pumpset including all material,labour,etc
394Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
395Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
396Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
397Transporting charges for Submersible pumpset
398Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
399Repairing and reconditioning of 1 HP OW Submersible Pumpset including all material,labour,etc
400Transporting the pumpset
401Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
402Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
403Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
404Repairing and reconditioning of 5 HP OW Submersible Pumpset including all material,labour,etc
405Transporting the pumpset
406Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
407Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
408Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
409Repairing and reconditioning of 7.5 HP OW Submersible Pumpset including all material,labour,etc
410Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
411Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
412Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
413Transporting charges for Submersible pumpset
414Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
415Repairing and reconditioning of 20HP OW Submersible Pumpset including all material,labour,etc
416Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
417Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
418Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
419Transporting charges for Submersible pumpset
420Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
421Repairing and reconditioning of 12.5 HP OW Submersible Pumpset Bore Well
422Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
423Transporting the pumpset.
424Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
425Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
426Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
427Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
428Repairing and reconditioning of ATS Starter 15.0 HP
429Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete., and as directed by TWAD Board officers.
430Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
431Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
432Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
433Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
434Repairing and reconditioning of ATS 30.0 HP
435Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
436Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
437Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
438Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
439Supply and Delivery of PLA Safety Relay suitable for the starter
440Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
441Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
442Repairing and reconditioning of ATS Starter 50 HP
443Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
444Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
445Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
446Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
447Supply and Delivery of PLA Safety Relay suitable for the starter
448Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
449Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
450Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
451Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
452Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
453Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
454Repairing and reconditioning of ATS Starter 20 HP
455Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
456Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
457Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
458Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
459Supply and Delivery of PLA Safety Relay suitable for the starter
460Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
461Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
462Repairing and reconditioning of ATS Starter 25 HP
463Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
464Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
465Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
466Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
467Supply and Delivery of PLA Safety Relay suitable for the starter
468Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
469Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
470Repairing and reconditioning of Star-delta Starter 10 HP
471Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
472Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
473Supply and Delivery of PLA Safety Relay suitable for the starter
474Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
475Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
476Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
477Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
478Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
479Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
480Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
481Repairing and reconditioning of Star-delta Starter 20 HP
482Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
483Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
484Supply and Delivery of PLA Safety Relay suitable for the starter
485Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
486Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
487Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
488Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
489Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
490Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
491Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
492Repairing and reconditioning of Star-delta Starter 12.5HP
493Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
494Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
495Supply and Delivery of PLA Safety Relay suitable for the starter
496Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
497Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
498Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
499Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
500Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
501Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
502Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
503Repairing and reconditioning of Star-delta Starter 7.5HP
504Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
505Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
506Supply and Delivery of PLA Safety Relay suitable for the starter
507Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
508Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
509Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
510Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
511Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
512Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
513Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
514Repairing and reconditioning of DOL Starter 5 HP
515Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
516Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
517Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
518Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
519Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
520Repairing and reconditioning of DOL Starter 3 HP
521Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
522Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
523Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
524Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
525Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
526Repairing and reconditioning of DOL Starter 2 HP
527Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
528Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
529Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
530Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
531Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
532Repairing and reconditioning of DOL Starter 1 HP
533Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
534Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
535Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
536Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
537Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
538Attending cable fault with replacing of cable at Headworks infiltration well to Collection sump
539PVC Insulated 3 core flat type copper cable-10 sq.mm
540Supply and delivery fixing of the following Electrical works:consumable items at the site of work carry out the general maintenance works
541Volt meter SR 96 600 V-AC
542Ammeter SR 96 5D/5A C.T.operated-AC
543LED Outdoor fittings a)30 W LED street light fittings
544Supply and delivery fixing of Moulded case circuit breaker (MCCB) with thermo magneticRelease 100 AMPS 3 Pole
545Supply and delivery fixing of Moulded case circuit breaker (MCCB) with thermo magneticRelease 125 AMPS 3 Pole
546Supply and delivery fixing of Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI markingTWAD SR 2022-23/P.205
547Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
548PVC/HDPE/AC/PSC - Minor Burst
54950mm 6 ksc PVC Pipes
55063mm 4 ksc PVC Pipes
55175mm 4 ksc PVC Pipes
55290mm 4 ksc PVC Pipes
553110mm 4 ksc PVC Pipes
554140mm 4 ksc PVC Pipes
555160mm 4 ksc PVC Pipes
55663 HDPE PN 6 Pipe
55775 HDPE PN 6 Pipe
55890 HDPE PN 6 Pipe
559110 HDPE PN 6 Pipe
560140 HDPE PN 6 Pipe
561150mm AC pipe
562200mm AC pipe
563250mm AC pipe
564350mm PSC pipe
565400mm PSC pipe
566GI - Above GL
567125 GI
568100 GI
56980 GI
57065 GI
57150 GI
572AC/PSC -Supply of MS Pipe with collar
573150mm AC pipe
574200mm AC pipe
575250mm AC pipe
576350mm PSC pipe
577400mm PSC pipe
578PVC/HDPE/AC/PSC - Major Burst
57950mm 6 ksc PVC Pipes
58063mm 4 ksc PVC Pipes
58175mm 4 ksc PVC Pipes
58290mm 4 ksc PVC Pipes
583110mm 4 ksc PVC Pipes
584140mm 4 ksc PVC Pipes
585160mm 4 ksc PVC Pipes
58663 HDPE PN 6 Pipe
58775 HDPE PN 6 Pipe
58890 HDPE PN 6 Pipe
589110 HDPE PN 6 Pipe
590140 HDPE PN 6 Pipe
591150mm AC pipe
592200mm AC pipe
593250mm AC pipe
594350mm PSC pipe
595400mm PSC pipe
596MS - Above GL
597350mm MS
598400mm MS
599MS - Below GL
600250mm MS
601Repair and Reconditioning of the Double Air Valve / Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
602100mm CI Sluice Valve
603150mm CI Sluice Valve
60450mm DI Single Chamber Air release Valve
60580mm DI Single Chamber Air release Valve
606100mm DI Single Chamber Air release Valve
607Replacement of Gun Metal Gate Valve including required length of GI nipple , Coupling etc complete
60850 mm GM Gate valve
60980 mm GM Gate valve
610Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
6114.00 LL capacity of Collection sump @ Arankottai HW
6124.00 LL capacity of sump @ Sripuranthan BS
6132.00 LL capacity of sump @T. Palur BS
6140.60 LL capacity of sump @ Sathambadi
6150.60 LL capacity of sump @ Karaikurichy
6161.00 LL capacity of sump @ Vikkaramangalam BS
6170.60 LL capacity of sump @ Keelanatham
6180.30 LL capacity of sump @ Gunamangalam
6191.00 LL capacity of sump @ Venmankondam
6200.30 LL capacity of sump @ Uilliyakudi
6210.10 LL capacity of sump @ Periyar Nagar
6220.60 LL capacity of sump @ Saveriyarpatty
6230.30 LL capacity of sump @ Arulmohzli
6240.30 LL capacity of sump @ Cholamadevi
6250.30 LL capacity of sump @ Ayeepalayam
6260.30 LL capacity of sump @ Kodalikaruppur
6270.30 LL capacity of sump @ Anaikudam
6280.60LL capacity of sump @ Keela Mickelpatty
6291.00 LL capacity of sump @ Kandiyankollai
6300.60 LL capacity of sump @ Sundaresapuram
6310.60 LL capacity of sump @ Payayankarai
6321.00 LL capacity of sump @ Kottiyal
6330.60 LL capacity of sump @ Kasankottai
634Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
635For the Year 2028-2029(From 01.04.2028 to 31.03.2029)
636Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
637Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
638Repairing and reconditioning of 15.0 HP Submersible Pumpset including all material,labour,etc at
639Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
640Transporting the pumpset .
641Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
642Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
643Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
644Repairing and reconditioning of 25.0 HP HSC Motor including all material,labour,etc
645Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
646Transportation charges for conveying the motor including loading and unloading charges.
647Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
648Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
649Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
650Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
651Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
652Repairing and reconditioning of 50 HP HSC Motor including all material,labour,etc at
653Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
654Transportation charges for conveying the motor including loading and unloading charges.
655Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
656Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
657Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
658Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
659Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
660Repairing and reconditioning of 25.00 HP HSC Pump including all material,labour,etc at
661Charges for removing and Reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
662Transportation charges for conveying the Pump assembly including loading and unloading charges.
663Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
664Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
665Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
666Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
667Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
668Supply and delivery of Driven End and Non Driven End bearings
669Repairing and reconditioning of 50 HP HSC Pump including all material,labour,etc at
670Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
671Transportation charges for conveying the Pump including loading and unloading charges.
672Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
673Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
674Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
675Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
676Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
677Supply and delivery of Driven End and Non Driven End bearings
678Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc
679Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
680Transportation charges for conveying the motor including loading and unloading charges.
681Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
682Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
683Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
684Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
685Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
686Repairing and reconditioning of 20 HP HSC Pump including all material,labour,etc
687Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
688Transportation charges for conveying the Pump assembly including loading and unloading charges.
689Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
690Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
691Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
692Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
693Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
694Supply and delivery of Driven End and Non Driven End bearings
695Repairing and reconditioning of 2 HP OW Submersible Pumpset including all material,labour,etc
696Transporting the pumpset .
697Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
698Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
699Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
700Repairing and reconditioning of 3 HP OW Submersible Pumpset including all material,labour,etc
701Transporting the pumpset
702Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
703Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
704Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
705Repairing and reconditioning of 10 HP OW Submersible Pumpset including all material,labour,etc
706Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
707Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
708Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
709Transporting charges for Submersible pumpset
710Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
711Repairing and reconditioning of 1 HP OW Submersible Pumpset including all material,labour,etc
712Transporting the pumpset
713Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
714Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
715Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
716Repairing and reconditioning of 5 HP OW Submersible Pumpset including all material,labour,etc
717Transporting the pumpset
718Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
719Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
720Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
721Repairing and reconditioning of 7.5 HP OW Submersible Pumpset including all material,labour,etc
722Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
723Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
724Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
725Transporting charges for Submersible pumpset
726Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
727Repairing and reconditioning of 20HP OW Submersible Pumpset including all material,labour,etc
728Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
729Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
730Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
731Transporting charges for Submersible pumpset
732Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
733Repairing and reconditioning of 12.5 HP OW Submersible Pumpset Bore Well
734Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
735Transporting the pumpset.
736Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
737Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
738Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
739Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
740Repairing and reconditioning of ATS Starter 15.0 HP
741Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete., and as directed by TWAD Board officers.
742Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
743Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
744Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
745Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
746Repairing and reconditioning of ATS 30.0 HP
747Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
748Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
749Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
750Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
751Supply and Delivery of PLA Safety Relay suitable for the starter
752Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
753Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
754Repairing and reconditioning of ATS Starter 50 HP
755Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
756Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
757Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
758Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
759Supply and Delivery of PLA Safety Relay suitable for the starter
760Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
761Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
762Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
763Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
764Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
765Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
766Repairing and reconditioning of ATS Starter 20 HP
767Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
768Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
769Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
770Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
771Supply and Delivery of PLA Safety Relay suitable for the starter
772Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
773Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
774Repairing and reconditioning of ATS Starter 25 HP
775Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
776Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
777Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
778Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
779Supply and Delivery of PLA Safety Relay suitable for the starter
780Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
781Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
782Repairing and reconditioning of Star-delta Starter 10 HP
783Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
784Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
785Supply and Delivery of PLA Safety Relay suitable for the starter
786Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
787Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
788Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
789Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
790Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
791Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
792Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
793Repairing and reconditioning of Star-delta Starter 20 HP
794Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
795Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
796Supply and Delivery of PLA Safety Relay suitable for the starter
797Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
798Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
799Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
800Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
801Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
802Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
803Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
804Repairing and reconditioning of Star-delta Starter 12.5HP
805Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
806Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
807Supply and Delivery of PLA Safety Relay suitable for the starter
808Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
809Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
810Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
811Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
812Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
813Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
814Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
815Repairing and reconditioning of Star-delta Starter 7.5HP
816Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
817Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
818Supply and Delivery of PLA Safety Relay suitable for the starter
819Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
820Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
821Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
822Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
823Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
824Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
825Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
826Repairing and reconditioning of DOL Starter 5 HP
827Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
828Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
829Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
830Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
831Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
832Repairing and reconditioning of DOL Starter 3 HP
833Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
834Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
835Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
836Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
837Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
838Repairing and reconditioning of DOL Starter 2 HP
839Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
840Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
841Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
842Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
843Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
844Repairing and reconditioning of DOL Starter 1 HP
845Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
846Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
847Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
848Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
849Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
850Attending cable fault with replacing of cable at Headworks infiltration well to Collection sump
851PVC Insulated 3 core flat type copper cable-10 sq.mm
852Supply and delivery fixing of the following Electrical works:consumable items at the site of work carry out the general maintenance works
853Volt meter SR 96 600 V-AC
854Ammeter SR 96 5D/5A C.T.operated-AC
855LED Outdoor fittings a)30 W LED street light fittings
856Supply and delivery fixing of Moulded case circuit breaker (MCCB) with thermo magneticRelease 100 AMPS 3 Pole
857Supply and delivery fixing of Moulded case circuit breaker (MCCB) with thermo magneticRelease 125 AMPS 3 Pole
858Supply and delivery fixing of Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
859Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
860PVC/HDPE/AC/PSC - Minor Burst
86150mm 6 ksc PVC Pipes
86263mm 4 ksc PVC Pipes
86375mm 4 ksc PVC Pipes
86490mm 4 ksc PVC Pipes
865110mm 4 ksc PVC Pipes
866140mm 4 ksc PVC Pipes
867160mm 4 ksc PVC Pipes
86863 HDPE PN 6 Pipe
86975 HDPE PN 6 Pipe
87090 HDPE PN 6 Pipe
871110 HDPE PN 6 Pipe
872140 HDPE PN 6 Pipe
873150mm AC pipe
874200mm AC pipe
875250mm AC pipe
876350mm PSC pipe
877400mm PSC pipe
878GI - Above GL
879125 GI
880100 GI
88180 GI
88265 GI
88350 GI
884AC/PSC -Supply of MS Pipe with collar
885150mm AC pipe
886200mm AC pipe
887250mm AC pipe
888350mm PSC pipe
889400mm PSC pipe
890PVC/HDPE/AC/PSC - Major Burst
89150mm 6 ksc PVC Pipes
89263mm 4 ksc PVC Pipes
89375mm 4 ksc PVC Pipes
89490mm 4 ksc PVC Pipes
895110mm 4 ksc PVC Pipes
896140mm 4 ksc PVC Pipes
897160mm 4 ksc PVC Pipes
89863 HDPE PN 6 Pipe
89975 HDPE PN 6 Pipe
90090 HDPE PN 6 Pipe
901110 HDPE PN 6 Pipe
902140 HDPE PN 6 Pipe
903150mm AC pipe
904200mm AC pipe
905250mm AC pipe
906350mm PSC pipe
907400mm PSC pipe
908MS - Above GL
909350mm MS
910400mm MS
911MS - Below GL
912250mm MS
913Repair and Reconditioning of the Double Air Valve / Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
914100mm CI Sluice Valve
915150mm CI Sluice Valve
91650mm DI Single Chamber Air release Valve
91780mm DI Single Chamber Air release Valve
918100mm DI Single Chamber Air release Valve
919Replacement of Gun Metal Gate Valve including required length of GI nipple , Coupling etc complete
92050 mm GM Gate valve
92180 mm GM Gate valve
922Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
9234.00 LL capacity of Collection sump @ Arankottai HW
9244.00 LL capacity of sump @ Sripuranthan BS
9252.00 LL capacity of sump @T. Palur BS
9260.60 LL capacity of sump @ Sathambadi
9270.60 LL capacity of sump @ Karaikurichy
9281.00 LL capacity of sump @ Vikkaramangalam BS
9290.60 LL capacity of sump @ Keelanatham
9300.30 LL capacity of sump @ Gunamangalam
9311.00 LL capacity of sump @ Venmankondam
9320.30 LL capacity of sump @ Uilliyakudi
9330.10 LL capacity of sump @ Periyar Nagar
9340.60 LL capacity of sump @ Saveriyarpatty
9350.30 LL capacity of sump @ Arulmohzli
9360.30 LL capacity of sump @ Cholamadevi
9370.30 LL capacity of sump @ Ayeepalayam
9380.30 LL capacity of sump @ Kodalikaruppur
9390.30 LL capacity of sump @ Anaikudam
9400.60LL capacity of sump @ Keela Mickelpatty
9411.00 LL capacity of sump @ Kandiyankollai
9420.60 LL capacity of sump @ Sundaresapuram
9430.60 LL capacity of sump @ Payayankarai
9441.00 LL capacity of sump @ Kottiyal
9450.60 LL capacity of sump @ Kasankottai
946Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
947Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
948For the Year 2026-2027 (From 01.01.2027 to 31.03.2027)
949Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
950Sump Cleaning
951Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries, materials, labour, all incidental chargs, application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
95240000 Lt capacity of sundakudi sump
953Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
954150mm AC CL 15 Pipes
955200mm AC CL 15 Pipes
956250mm AC CL 15 Pipes
957Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
95850 mm 6 ksc PVC Pipes
95963mm 4 ksc PVC Pipes
96075mm 4 ksc PVC Pipes
96190 mm 4 ksc PVC Pipes
962140mm 4 ksc PVC Pipes
963225mm 4 KSC PVC Pipes
964150mm AC CL 15 Pipes
965200mm AC CL 15 Pipes
966250mm AC CL 15 Pipes
967Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
96850 mm 6 ksc PVC Pipes
96963mm 4 ksc PVC Pipes
97075mm 4 ksc PVC Pipes
97190 mm 4 ksc PVC Pipes
972140mm 4 ksc PVC Pipes
973225mm 4 KSC PVC Pipes
974150mm AC CL 15 Pipes
975200mm AC CL 15 Pipes
976250mm AC CL 15 Pipes
977Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
978Repairing and reconditioning of Pump for 30 HP Submersible Pumpset
979Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
980Transporting the pumpset from Pump House to work shop.
981Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
982Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
983Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
984Repairing and reconditioning of Pump for 7.50 HP Centrifugal Pumpset-Sump at sundakudi 1 No
985Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
986Transporting the pumpset.
987Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
988Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
989Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
990Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
991Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
992Repairing and reconditioning of Pump for 12.50 HP Submersible Pumpset bore well
993Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
994Transporting the pumpset.
995Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
996Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
997Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
998Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
999Repairing of Starter ATS 30 HP
1000Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1001Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1002Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1003Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1004Supply and Delivery of PLA Safety Relay suitable for the starter
1005Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1006Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1007Repairing of Starter Star & Delta 12.5 HP
1008Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1009Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1010Supply and Delivery of PLA Safety Relay suitable for the starter
1011Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1012Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1013Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1014Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1015Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1016Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1017Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1018Repairing of Starter Star & Delta 7.50 HP
1019Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1020Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1021Supply and Delivery of PLA Safety Relay suitable for the starter
1022Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1023Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1024Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1025Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1026Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1027Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1028Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1029Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1030Supply and delivery of the following Electrical works:consumable items
1031Volt meter SR 96 600 V-AC
1032Ammeter SR 96 5D/5A C.T.operated-AC
1033LED Outdoor fittings a)30 W LED street light fittings
1034Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1035Supply and delivery of DI Single Chamber Air release ValveTWAD
1036DI Single Chamber Air release Valve 80mm for 250mm Pipe
1037DI Single Chamber Air release Valve 50mm for 200mm Pipe
1038Single Air CI valve 25mm
1039Supply of Flow control valve 40mm (1LPM to 400 LPM adjustable type arragements)
1040Flow control Valve
1041Charges for Repair and Reconditioning of the Sluice Valves and Air Valves fixed in the Pumping Main, Feeder Main and Branch Main including cost of all materials and labour charges etc., complete
1042150mm Sluice Valve
1043Supply and delivery of GM gate valve and as per IS BS5154
104450mm GM Valve
1045Repair and Reconditioning of the Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
1046Repairing 80mm Air Valve
1047Repairing 50mm Air Valve
1048Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1049For the Year 2027-2028(From 01.04.2027 to 31.03.2028)
1050Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1051Sump Cleaning
1052Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries, materials, labour, all incidental chargs, application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
105340000 Lt capacity of sundakudi sump
1054Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1055150mm AC CL 15 Pipes
1056200mm AC CL 15 Pipes
1057250mm AC CL 15 Pipes
1058Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
105950 mm 6 ksc PVC Pipes
106063mm 4 ksc PVC Pipes
106175mm 4 ksc PVC Pipes
106290 mm 4 ksc PVC Pipes
1063140mm 4 ksc PVC Pipes
1064225mm 4 KSC PVC Pipes
1065150mm AC CL 15 Pipes
1066200mm AC CL 15 Pipes
1067250mm AC CL 15 Pipes
1068Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
106950 mm 6 ksc PVC Pipes
107063mm 4 ksc PVC Pipes
107175mm 4 ksc PVC Pipes
107290 mm 4 ksc PVC Pipes
1073140mm 4 ksc PVC Pipes
1074225mm 4 KSC PVC Pipes
1075150mm AC CL 15 Pipes
1076200mm AC CL 15 Pipes
1077250mm AC CL 15 Pipes
1078Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1079Repairing and reconditioning of Pump for 30 HP Submersible Pumpset
1080Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1081Transporting the pumpset from Pump House to work shop.
1082Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1083Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1084Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1085Repairing and reconditioning of Pump for 7.50 HP Centrifugal Pumpset-Sump at sundakudi 1 No
1086Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
1087Transporting the pumpset.
1088Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
1089Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
1090Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1091Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
1092Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
1093Repairing and reconditioning of Pump for 12.50 HP Submersible Pumpset bore well
1094Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1095Transporting the pumpset.
1096Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1097Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1098Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1099Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1100Repairing of Starter ATS 30 HP
1101Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1102Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1103Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1104Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1105Supply and Delivery of PLA Safety Relay suitable for the starter
1106Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1107Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1108Repairing of Starter Star & Delta 12.5 HP
1109Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1110Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1111Supply and Delivery of PLA Safety Relay suitable for the starter
1112Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1113Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1114Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1115Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1116Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1117Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1118Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1119Repairing of Starter Star & Delta 7.50 HP
1120Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1121Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1122Supply and Delivery of PLA Safety Relay suitable for the starter
1123Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1124Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1125Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1126Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1127Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1128Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1129Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1130Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1131Supply and delivery of the following Electrical works:consumable items
1132Volt meter SR 96 600 V-AC
1133Ammeter SR 96 5D/5A C.T.operated-AC
1134LED Outdoor fittings a)30 W LED street light fittings PWD
1135Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1136Supply and delivery of DI Single Chamber Air release Valve
1137DI Single Chamber Air release Valve 80mm for 250mm Pipe
1138DI Single Chamber Air release Valve 50mm for 200mm Pipe
1139Single Air CI valve 25mm
1140Supply of Flow control valve 40mm (1LPM to 400 LPM adjustable type arragements)
1141Flow control Valve
1142Charges for Repair and Reconditioning of the Sluice Valves and Air Valves fixed in the Pumping Main, Feeder Main and Branch Main including cost of all materials and labour charges etc., complete
1143150mm Sluice Valve
1144Supply and delivery of GM gate valve and as per IS BS5154
114550mm GM Valve
1146Repair and Reconditioning of the Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
1147Repairing 80mm Air Valve
1148Repairing 50mm Air Valve
1149Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1150For the Year 2028-2029(From 01.04.2028 to 31.03.2029)
1151Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1152Sump Cleaning
1153Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries, materials, labour, all incidental chargs, application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
115440000 Lt capacity of sundakudi sump
1155Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1156150mm AC CL 15 Pipes
1157200mm AC CL 15 Pipes
1158250mm AC CL 15 Pipes
1159Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
116050 mm 6 ksc PVC Pipes
116163mm 4 ksc PVC Pipes
116275mm 4 ksc PVC Pipes
116390 mm 4 ksc PVC Pipes
1164140mm 4 ksc PVC Pipes
1165225mm 4 KSC PVC Pipes
1166150mm AC CL 15 Pipes
1167200mm AC CL 15 Pipes
1168250mm AC CL 15 Pipes
1169Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
117050 mm 6 ksc PVC Pipes
117163mm 4 ksc PVC Pipes
117275mm 4 ksc PVC Pipes
117390 mm 4 ksc PVC Pipes
1174140mm 4 ksc PVC Pipes
1175225mm 4 KSC PVC Pipes
1176150mm AC CL 15 Pipes
1177200mm AC CL 15 Pipes
1178250mm AC CL 15 Pipes
1179Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1180Repairing and reconditioning of Pump for 30 HP Submersible Pumpset
1181Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1182Transporting the pumpset from Pump House to work shop.
1183Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1184Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1185Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1186Repairing and reconditioning of Pump for 7.50 HP Centrifugal Pumpset-Sump at sundakudi 1 No
1187Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
1188Transporting the pumpset.
1189Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
1190Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
1191Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1192Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
1193Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
1194Repairing and reconditioning of Pump for 12.50 HP Submersible Pumpset bore well
1195Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1196Transporting the pumpset.
1197Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1198Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1199Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1200Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1201Repairing of Starter ATS 30 HP
1202Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1203Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1204Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1205Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1206Supply and Delivery of PLA Safety Relay suitable for the starter
1207Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1208Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1209Repairing of Starter Star & Delta 12.5 HP
1210Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1211Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1212Supply and Delivery of PLA Safety Relay suitable for the starter
1213Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1214Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1215Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1216Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1217Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1218Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1219Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1220Repairing of Starter Star & Delta 7.50 HP
1221Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1222Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1223Supply and Delivery of PLA Safety Relay suitable for the starter
1224Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1225Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1226Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1227Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1228Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1229Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1230Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1231Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1232Supply and delivery of the following Electrical works:consumable items
1233Volt meter SR 96 600 V-AC
1234Ammeter SR 96 5D/5A C.T.operated-AC
1235LED Outdoor fittings a)30 W LED street light fittings
1236Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1237Supply and delivery of DI Single Chamber Air release Valve
1238DI Single Chamber Air release Valve 80mm for 250mm Pipe
1239DI Single Chamber Air release Valve 50mm for 200mm Pipe
1240Single Air CI valve 25mm
1241Supply of Flow control valve 40mm (1LPM to 400 LPM adjustable type arragements)
1242Flow control Valve
1243Charges for Repair and Reconditioning of the Sluice Valves and Air Valves fixed in the Pumping Main, Feeder Main and Branch Main including cost of all materials and labour charges etc., complete
1244150mm Sluice Valve
1245Supply and delivery of GM gate valve and as per IS BS5154
124650mm GM Valve
1247Repair and Reconditioning of the Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
1248Repairing 80mm Air Valve
1249Repairing 50mm Air Valve
1250Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1251Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1252For the Year 2026-2027 (From 01.012027 to 31.03.2027)
1253Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1254Leak and Burst works
1255Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1256200mm AC CL 15 Pipes
1257Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
125850 mm 6 ksc PVC Pipes
125963mm 4 ksc PVC Pipes
126075mm 4 ksc PVC Pipes
126190mm 4 ksc PVC Pipes
1262110mm 4Ksc PVC Pipes
1263140mm 4 ksc PVC Pipes
1264200mm AC CL 15 Pipes
126563mm HDPE PN6
126675mm HDPE PN6
126790mm HDPE PN6
1268110mm HDPE PN6
1269140mm HDPE PN6
1270200mm HDPE PN6
1271200mm HDPE PN8
1272Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
127350 mm 6 ksc PVC Pipes
127463mm 4 ksc PVC Pipes
127575mm 4 ksc PVC Pipes
127690mm 4 ksc PVC Pipes
1277110mm 4Ksc PVC Pipes
1278140mm 4 ksc PVC Pipes
1279200mm AC CL 15 Pipes
128063mm HDPE PN6
128175mm HDPE PN6
128290mm HDPE PN6
1283110mm HDPE PN6
1284140mm HDPE PN6
1285200mm HDPE PN6
1286200mm HDPE PN8
1287Attending in the GI pipe leak above GL of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.
128850mm GI Pipe
128965mm GI Pipe
129080mm GI Pipe
1291100mm GI Pipe
1292Repairs & Renewals
1293Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1294Repairing and reconditioning of Pump for 30 HP Submersible Pumpset including all material,labour,etc
1295Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1296Transporting the pumpset from Pump House to work shop.
1297Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1298Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1299Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1300Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
1301Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1302Repairing and reconditioning of Pump for12.50 HP Submersible Pumpset 1No
1303Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1304Transporting the pumpset from Pump House to work shop.
1305Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1306Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1307Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1308Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
1309Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1310Repairing and reconditioning of Pump for 1 HP Monoblock Pumpset-SP at Kovilur -1 No
1311Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
1312Transporting the pumpset from the Pumping Station to work shop.
1313Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
1314Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
1315Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1316Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
1317Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
1318Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
1319Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
1320Repair of Starter ATS 30 HP
1321Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1322Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
1323Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1324Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1325Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1326Supply and Delivery of PLA Safety Relay suitable for the starter
1327Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1328Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1329Repair of Starter Star Delta 12.5 HP
1330Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1331Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1332Supply and Delivery of PLA Safety Relay suitable for the starter
1333Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1334Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1335Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1336Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1337Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1338Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1339Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1340Repair of Starter DOL 1 HP
1341Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
1342Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1343Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1344Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
1345Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1346Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1347Supply and delivery of the following Electrical works:consumable items
1348Volt meter SR 96 600 V-AC
1349Ammeter SR 96 5D/5A C.T.operated-AC
1350LED Outdoor fittings a)30 W LED street light fittings
1351Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1352Sump Cleaning
1353Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
13541.00 LL capacity of Kovilur stand post
1355Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1356For the Year 2027-2028(From 01.04.2027 to 31.03.2028)
1357Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1358Leak and Burst works
1359Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1360200mm AC CL 15 Pipes
1361Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
136250 mm 6 ksc PVC Pipes
136363mm 4 ksc PVC Pipes
136475mm 4 ksc PVC Pipes
136590mm 4 ksc PVC Pipes
1366110mm 4Ksc PVC Pipes
1367140mm 4 ksc PVC Pipes
1368200mm AC CL 15 Pipes
136963mm HDPE PN6
137075mm HDPE PN6
137190mm HDPE PN6
1372110mm HDPE PN6
1373140mm HDPE PN6
1374200mm HDPE PN6
1375200mm HDPE PN8
1376Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
137750 mm 6 ksc PVC Pipes
137863mm 4 ksc PVC Pipes
137975mm 4 ksc PVC Pipes
138090mm 4 ksc PVC Pipes
1381110mm 4Ksc PVC Pipes
1382140mm 4 ksc PVC Pipes
1383200mm AC CL 15 Pipes
138463mm HDPE PN6
138575mm HDPE PN6
138690mm HDPE PN6
1387110mm HDPE PN6
1388140mm HDPE PN6
1389200mm HDPE PN6
1390200mm HDPE PN8
1391Attending in the GI pipe leak above GL of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.
139250mm GI Pipe
139365mm GI Pipe
139480mm GI Pipe
1395100mm GI Pipe
1396Repairs & Renewals
1397Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1398Repairing and reconditioning of Pump for 30 HP Submersible Pumpset including all material,labour,etc
1399Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1400Transporting the pumpset from Pump House to work shop.
1401Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1402Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1403Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1404Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
1405Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1406Repairing and reconditioning of Pump for12.50 HP Submersible Pumpset 1No
1407Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1408Transporting the pumpset from Pump House to work shop.
1409Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1410Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1411Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1412Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
1413Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1414Repairing and reconditioning of Pump for 1 HP Monoblock Pumpset-SP at Kovilur -1 No
1415Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
1416Transporting the pumpset from the Pumping Station to work shop.
1417Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
1418Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
1419Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1420Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
1421Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
1422Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
1423Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
1424Repair of Starter ATS 30 HP
1425Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1426Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
1427Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1428Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1429Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1430Supply and Delivery of PLA Safety Relay suitable for the starter
1431Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1432Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1433Repair of Starter Star Delta 12.5 HP
1434Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1435Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1436Supply and Delivery of PLA Safety Relay suitable for the starter
1437Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1438Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1439Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1440Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1441Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1442Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1443Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1444Repair of Starter DOL 1 HP
1445Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
1446Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1447Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1448Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
1449Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1450Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1451Supply and delivery of the following Electrical works:consumable items
1452Volt meter SR 96 600 V-AC
1453Ammeter SR 96 5D/5A C.T.operated-AC
1454LED Outdoor fittings a)30 W LED street light fittings
1455Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1456Sump Cleaning
1457Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
14581.00 LL capacity of Kovilur stand post
1459Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1460For the Year 2028-2029(From 01.04.2028 to 31.03.2029)
1461Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1462Leak and Burst works
1463Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1464200mm AC CL 15 Pipes
1465Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
146650 mm 6 ksc PVC Pipes
146763mm 4 ksc PVC Pipes
146875mm 4 ksc PVC Pipes
146990mm 4 ksc PVC Pipes
1470110mm 4Ksc PVC Pipes
1471140mm 4 ksc PVC Pipes
1472200mm AC CL 15 Pipes
147363mm HDPE PN6
147475mm HDPE PN6
147590mm HDPE PN6
1476110mm HDPE PN6
1477140mm HDPE PN6
1478200mm HDPE PN6
1479200mm HDPE PN8
1480Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
148150 mm 6 ksc PVC Pipes
148263mm 4 ksc PVC Pipes
148375mm 4 ksc PVC Pipes
148490mm 4 ksc PVC Pipes
1485110mm 4Ksc PVC Pipes
1486140mm 4 ksc PVC Pipes
1487200mm AC CL 15 Pipes
148863mm HDPE PN6
148975mm HDPE PN6
149090mm HDPE PN6
1491110mm HDPE PN6
1492140mm HDPE PN6
1493200mm HDPE PN6
1494200mm HDPE PN8
1495Attending in the GI pipe leak above GL of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.
149650mm GI Pipe
149765mm GI Pipe
149880mm GI Pipe
1499100mm GI Pipe
1500Repairs & Renewals
1501Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1502Repairing and reconditioning of Pump for 30 HP Submersible Pumpset including all material,labour,etc
1503Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1504Transporting the pumpset from Pump House to work shop.
1505Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1506Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1507Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1508Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
1509Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1510Repairing and reconditioning of Pump for12.50 HP Submersible Pumpset 1No
1511Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1512Transporting the pumpset from Pump House to work shop.
1513Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1514Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1515Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1516Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
1517Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1518Repairing and reconditioning of Pump for 1 HP Monoblock Pumpset-SP at Kovilur -1 No
1519Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
1520Transporting the pumpset from the Pumping Station to work shop.
1521Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
1522Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
1523Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1524Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
1525Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
1526Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
1527Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
1528Repair of Starter ATS 30 HP
1529Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1530Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
1531Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1532Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1533Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1534Supply and Delivery of PLA Safety Relay suitable for the starter
1535Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1536Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1537Repair of Starter Star Delta 12.5 HP
1538Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1539Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1540Supply and Delivery of PLA Safety Relay suitable for the starter
1541Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1542Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1543Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1544Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1545Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1546Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1547Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1548Repair of Starter DOL 1 HP
1549Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
1550Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1551Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1552Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
1553Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1554Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1555Supply and delivery of the following Electrical works:consumable items
1556Volt meter SR 96 600 V-AC
1557Ammeter SR 96 5D/5A C.T.operated-AC
1558LED Outdoor fittings a)30 W LED street light fittings
1559Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1560Sump Cleaning
1561Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
15621.00 LL capacity of Kovilur stand post
1563Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1564Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1565For the Year 2026-2027 (From 01.01.2027 to 31.03.2027)
1566Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1567Leak and Burst works
1568Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1569300mm AC CL15 pipe
1570350mm PSC pipe
1571Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1572300mm AC CL 15 pipe
1573350mm PSC pipe
1574Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1575150mm CI Pipe
1576300mm AC CL 15 Pipe
1577350mm PSC pipe
1578Repairs & Renewals
1579Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1580Repairing and reconditioning of 40 HP HSC Motor including all material,labour,etc at Kodalikaruppur HW
1581Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1582Transportation charges for conveying the motor including loading and unloading charges.
1583Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
1584Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1585Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1586Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
1587Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1588Repairing and reconditioning of 40 HP HSC Pump including all material,labour,etc at Kodalikaruppur HW
1589Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
1590Transportation charges for conveying the Pump assembly including loading and unloading charges.
1591Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
1592Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
1593Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
1594Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
1595Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
1596Supply and delivery of Driven End and Non Driven End bearings
1597Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1598Repairing and reconditioning of 60 HP HSC Motor including all material,labour,etc at Anaikudam BS
1599Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1600Transportation charges for conveying the motor including loading and unloading charges.
1601Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
1602Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1603Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1604Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
1605Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1606Repairing and reconditioning of 60 HP HSC Motor including all material,labour,etc at Anaikudam BS
1607Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
1608Transportation charges for conveying the Pump assembly including loading and unloading charges.
1609Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
1610Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
1611Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
1612Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
1613Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
1614Supply and delivery of Driven End and Non Driven End bearings
1615Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1616Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour,etc at Infiltration Well
1617Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1618Transporting the pumpset.
1619Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1620Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1621Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1622Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1623Repair of Starter ATS 40 HP
1624Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1625Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1626Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1627Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1628Supply and Delivery of PLA Safety Relay suitable for the starter
1629Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1630Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1631Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1632Repair of Starter Star & Delta 12.50 HP
1633Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1634Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1635Supply and Delivery of PLA Safety Relay suitable for the starter
1636Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1637Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1638Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1639Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1640Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1641Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1642Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1643Supply and delivery of the following Electrical works:consumable items
1644Volt meter SR 96 600 V-AC
1645Ammeter SR 96 5D/5A C.T.operated-AC
1646LED Outdoor fittings a)30 W LED street light fitting
1647Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1648Supply and delivery of fully automatic air break ATS starter 60HP as per IS8544 PART IV etc complete as directed/
1649Supply and delivery of fully automatic air break ATS starter 40HP as per IS8544 PART IV etc complete as directed/TWAD SR 2025-26
1650Supply and delivery of MCCB for following capacity
1651400 Amp 3 Pole for incoming including Terminal rotary handle
1652250 Amp 3 Pole for 40 HP Pump set Head work & Booster including Terminal rotary handle
1653100 Amp 3 Pole for 12.5 HP Pump set including Terminal rotary handle
1654Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1655Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers.
165650mm Dia GI Pipe
1657Sump Cleaning
1658Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
16593.00 LL capacity of Collection sump @ Kodalikaruppur HW
16603.00 LL capacity of sump @ Anaikudam BS
1661300mm AC CL15 pipe
1662Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1663For the Year 2027-2028(From 01.04.2027 to 31.03.2028)
1664Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1665Leak and Burst works
1666Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1667300mm AC CL15 pipe
1668350mm PSC pipe
1669Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1670300mm AC CL 15 pipe
1671350mm PSC pipe
1672Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1673150mm CI Pipe
1674300mm AC CL 15 Pipe
1675350mm PSC pipe
1676Repairs & Renewals
1677Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1678Repairing and reconditioning of 40 HP HSC Motor including all material,labour,etc at Kodalikaruppur HW
1679Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1680Transportation charges for conveying the motor including loading and unloading charges.
1681Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
1682Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1683Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1684Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
1685Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1686Repairing and reconditioning of 40 HP HSC Pump including all material,labour,etc at Kodalikaruppur HW
1687Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
1688Transportation charges for conveying the Pump assembly including loading and unloading charges.
1689Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
1690Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
1691Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
1692Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
1693Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
1694Supply and delivery of Driven End and Non Driven End bearings
1695Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1696Repairing and reconditioning of 60 HP HSC Motor including all material,labour,etc at Anaikudam BS
1697Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1698Transportation charges for conveying the motor including loading and unloading charges.
1699Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
1700Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1701Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1702Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
1703Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1704Repairing and reconditioning of 60 HP HSC Motor including all material,labour,etc at Anaikudam BS
1705Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
1706Transportation charges for conveying the Pump assembly including loading and unloading charges.
1707Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
1708Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
1709Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
1710Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
1711Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
1712Supply and delivery of Driven End and Non Driven End bearings
1713Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1714Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour,etc at Infiltration Well
1715Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1716Transporting the pumpset.
1717Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1718Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1719Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1720Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1721Repair of Starter ATS 40 HP
1722Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1723Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1724Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1725Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1726Supply and Delivery of PLA Safety Relay suitable for the starter
1727Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1728Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1729Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1730Repair of Starter Star & Delta 12.50 HP
1731Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1732Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1733Supply and Delivery of PLA Safety Relay suitable for the starter
1734Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1735Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1736Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1737Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1738Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1739Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1740Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1741Supply and delivery of the following Electrical works:consumable items
1742Volt meter SR 96 600 V-AC
1743Ammeter SR 96 5D/5A C.T.operated-AC
1744LED Outdoor fittings a)30 W LED street light fittings
1745Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1746Supply and delivery of fully automatic air break ATS starter 60HP as per IS8544 PART IV etc complete as directed/TWAD SR 2025-26
1747Supply and delivery of fully automatic air break ATS starter 40HP as per IS8544 PART IV etc complete as directed/TWAD SR 2025-26
1748Supply and delivery of MCCB for following capacity
1749400 Amp 3 Pole for incoming including Terminal rotary handle
1750250 Amp 3 Pole for 40 HP Pump set Head work & Booster including Terminal rotary handle
1751100 Amp 3 Pole for 12.5 HP Pump set including Terminal rotary handle
1752Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1753Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers.
175450mm Dia GI Pipe
1755Sump Cleaning
1756Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
17573.00 LL capacity of Collection sump @ Kodalikaruppur HW
17583.00 LL capacity of sump @ Anaikudam BS
1759300mm AC CL15 pipe
1760Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1761For the Year 2028-2029(From 01.04.2028 to 31.03.2029)
1762Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1763Leak and Burst works
1764Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1765300mm AC CL15 pipe
1766350mm PSC pipe
1767Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1768300mm AC CL 15 pipe
1769350mm PSC pipe
1770Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1771150mm CI Pipe
1772300mm AC CL 15 Pipe
1773350mm PSC pipe
1774Repairs & Renewals
1775Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1776Repairing and reconditioning of 40 HP HSC Motor including all material,labour,etc at Kodalikaruppur HW
1777Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1778Transportation charges for conveying the motor including loading and unloading charges.
1779Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
1780Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1781Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1782Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
1783Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1784Repairing and reconditioning of 40 HP HSC Pump including all material,labour,etc at Kodalikaruppur HW
1785Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
1786Transportation charges for conveying the Pump assembly including loading and unloading charges.
1787Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
1788Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
1789Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
1790Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
1791Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
1792Supply and delivery of Driven End and Non Driven End bearings
1793Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1794Repairing and reconditioning of 60 HP HSC Motor including all material,labour,etc at Anaikudam BS
1795Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1796Transportation charges for conveying the motor including loading and unloading charges.
1797Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
1798Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1799Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1800Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
1801Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1802Repairing and reconditioning of 60 HP HSC Motor including all material,labour,etc at Anaikudam BS
1803Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
1804Transportation charges for conveying the Pump assembly including loading and unloading charges.
1805Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
1806Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
1807Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
1808Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
1809Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
1810Supply and delivery of Driven End and Non Driven End bearings
1811Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1812Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour,etc at Infiltration Well
1813Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1814Transporting the pumpset.
1815Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1816Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1817Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1818Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1819Repair of Starter ATS 40 HP
1820Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1821Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1822Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1823Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1824Supply and Delivery of PLA Safety Relay suitable for the starter
1825Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1826Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1827Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1828Repair of Starter Star & Delta 12.50 HP
1829Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1830Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1831Supply and Delivery of PLA Safety Relay suitable for the starter
1832Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1833Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1834Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1835Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1836Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1837Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1838Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1839Supply and delivery of the following Electrical works:consumable items
1840Volt meter SR 96 600 V-AC
1841Ammeter SR 96 5D/5A C.T.operated-AC
1842LED Outdoor fittings a)30 W LED street light fittings
1843Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
1844Supply and delivery of fully automatic air break ATS starter 60HP as per IS8544 PART IV etc complete as directed/TWAD SR 2025-26
1845Supply and delivery of fully automatic air break ATS starter 40HP as per IS8544 PART IV etc complete as directed/TWAD SR 2025-26
1846Supply and delivery of MCCB for following capacity
1847400 Amp 3 Pole for incoming including Terminal rotary handle
1848250 Amp 3 Pole for 40 HP Pump set Head work & Booster including Terminal rotary handle
1849100 Amp 3 Pole for 12.5 HP Pump set including Terminal rotary handle
1850Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1851Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers.
185250mm Dia GI Pipe
1853Sump Cleaning
1854Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
18553.00 LL capacity of Collection sump @ Kodalikaruppur HW
18563.00 LL capacity of sump @ Anaikudam BS
1857300mm AC CL15 pipe
1858Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1859Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
1860For the Year 2026-2027 (From 01.01.2027 to 31.03.2027)
1861Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
1862Leak and Burst works
1863Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1864200mm AC pipe
1865250mm AC pipe
1866250mm CI pipe
1867300mm CI pipe
1868Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1869200mm AC pipe
1870250mm AC pipe
1871250mm DI pipe
1872250mm CI pipe
1873300mm CI pipe
1874300mm DI pipe
187563mm PVC 4KSC pipe
187690mm PVC 4KSC Pipe
1877110mm PVC 4KSC Pipe
1878Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1879250mm AC pipe
1880250mm CI pipe
1881250mm DI pipe
1882300mm CI pipe
1883300mm DI pipe
1884Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
1885300mm MS Pipe Below GL
1886300mm MS Pipe Above GL
1887Repairs & Renewals
1888Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
1889Repairing and reconditioning of 50 HP VT Motor including all material,labour,etc at Kodalikaruppur Headworks - Motor
1890Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1891Transportation charges for conveying the motor from the Station to Our work shop including loading and unloading charges.
1892Labour Charges for removing the two end side cover with fan arrangements and Dismantling the damaged NDE Side ball Bearing from the motor after removing the Rachet assembly load bearing safely and Fixing the New ball Bearing in the appropriate place with required lubricants without any damage to the motor shaft and winding after deducting the old damaged materials.
1893Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1894Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1895Supply and delivery of Non Driven End Deep Grove ball Bearing SKF Make suitable for the Squirrel Gage Induction Motor.
1896Labour Charges fixing the NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1897Repairing and reconditioning of 50 HP VT Pump including all material,labour,etc at Kodalikaruppur Headworks - Pump
1898Charges for Removing the Hollow shaft Squirrel cage Induction Motor after disconnecting the Power supply Cable, Discharge Head, Head Shaft and Stuffing Box by using contractor tools at Collector Well / Collection Sump
1899Charges for removing the all Column pipes of VT Pumpset each 1.5 m / 2.00 m to length and bowl assemblly for attending Pump repair works
1900Transportation charges for conveying the VT Pump bowl assembly from Collector Well Pump room to Work Shop including usage of trolley along the Foot bridge and Van
1901Reconditioning of Stuffing Box for providing bronze bush suitable for fixing thr Rope Gland and Head Shaft to avoid frequent damaging of rope and to avoid spreading of more leakage water from the Rope Gland including lath works etc., complete.
1902Charges for Lathe work of reconditioning of Pump SS Shaft with balancing, SS Bushes and sleeves, charges for Spider bore nd outer dimension phase out lath works, reconditioning of impeller and impeller ring & charges fixing the bearing and bronze bushes in the bowl assembly including correct setting of impeller allignment etc complete
1903Charges for reassembling the all Column pipes of Turbine Pump set and bowl assemblly after attending Pump repair works in the proper allignment after attending the cleaning and painting work in the coloumn pipe and body of the bowl assembly
1904Repairing and reconditioning of 50 HP VT Motor including all material,labour,etc at Kodalikaruppur Headworks - Materials Supply
1905Supply and Delivery of SS 410 New Pump Head Shaft for required mm and required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
1906Supply and Delivery of SS 410 New Pump Line Shaft for required mm and required length. (including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
1907Supply and delivery of stuffing box brone bush suitable for the Discharge Head assembly
1908Supply and Delivery of Required TVS Bolt , Nut and Washer for Bowl Assembly and all Column Pipe for inplace of Wornout Bolt and Nuts after deducting the cost of scrap materials and as Directed by TWAD Board Officers.
1909Supply and Delivery of Line shaft SS Coupling with Bush (including Raw Materials, Machining , Polishing etc., Complete)
1910Supply and Delivery of SS Sleeves Suitable for the Line Shaft for Inplace of Wornout SS Sleeves after deducting the cost of scrap materials as Directed by TWAD Board Officers.
1911Supply and Delivery of Spider Rubber Bush made in Hard Rubber and Finishing to Suit in Between the Casting Spider and Line shaft inplace of wornout Rubber Bush after deducting the cost of scrap materials as directed by TWAD Board Officers.
1912Supply and Delivery of Bronze Bush Bearing Suitable for Bowl Assembly and Pump Shaft inplace of wornout bronze Bush Bearing after deducting the cost of scrap materials as directed by TWAD Board Officers.
1913Supply and Delivery of 1.Bronze Bush Bearing Suitable for the Bowl Assembly (Top Side) 2. Bronze Bush Bearing Suitable for the Bell Mouth (Bottom) for inplace of wornout Bronze Bush Bearings after deducting the cost of scrap materials as Directed by TWAD Board Officers.
1914Supply and delivery of MS Seamless required size of Coloumn pipe suitable for the VT Pumpset
1915Supply and delivery of spider suitable for the coloumn pipe including cost of Raw Materials, welding, polishing etc., complete as directed by TWAD officers
1916Supply and delivery of new intermedia ring (Prosperous bronze metal) between bowl assembly and as directed by TWAD officers
1917Supply and delivery of new bowl shaft for required size for required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete) and as directed by TWAD officers
1918Supply and delivery of Top Load Bearing with Ratchet assembly including Required Grade lubricating components
1919Repairing and reconditioning of 20 HP Submersible openwell Pumpset at Kodalikaruppur HW - Motor
1920Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1921Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1922Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1923Transporting charges for Submersible pumpset
1924Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1925Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc at Udayarpalayam sump - Motor
1926Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1927Transportation charges for conveying the motor including loading and unloading charges.
1928Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
1929Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1930Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1931Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
1932Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1933Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc at Udayarpalayam sump - Pump
1934Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
1935Transportation charges for conveying the Pump assembly including loading and unloading charges.
1936Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
1937Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
1938Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
1939Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
1940Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
1941Supply and delivery of Driven End and Non Driven End bearings
1942Repairing and reconditioning of 50 HP HSCMotor including all material,labour,etc at Anaikudam Booster Station - Motor
1943Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
1944Transportation charges for conveying the motor including loading and unloading charges.
1945Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
1946Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
1947Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
1948Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
1949Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
1950Repairing and reconditioning of 50 HP HSCMotor including all material,labour,etc at Anaikudam Booster Station - Pump
1951Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
1952Transportation charges for conveying the Pump including loading and unloading charges.
1953Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
1954Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
1955Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
1956Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
1957Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
1958Supply and delivery of Driven End and Non Driven End bearings
1959Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour,etc
1960Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
1961Transporting the pumpset.
1962Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
1963Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
1964Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
1965Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
1966Repair of Starter ATS 50 HP
1967Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1968Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1969Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1970Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1971Supply and Delivery of PLA Safety Relay suitable for the starter
1972Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1973Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1974Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
1975Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
1976Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1977Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1978Repair of Starter ATS 20 HP
1979Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
1980Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
1981Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
1982Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1983Supply and Delivery of PLA Safety Relay suitable for the starter
1984Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1985Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1986Repair of Starter Star & Delta 12.50 HP
1987Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
1988Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
1989Supply and Delivery of PLA Safety Relay suitable for the starter
1990Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
1991Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
1992Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
1993Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
1994Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
1995Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
1996Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
1997Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
1998Supply and delivery of the following Electrical works:consumable items
1999Volt meter SR 96 600 V-AC
2000Ammeter SR 96 5D/5A C.T.operated-AC
2001LED Outdoor fittings a)30 W LED street light fittings
2002Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
2003Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers
200450mm Dia GI Pipe
200580mm Dia GI Pipe
2006Sump Cleaning
2007Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
20083.00 LL capacity of Collection sump @ Kodalikaruppur HW
20090.30 LL capacity of sump @ Anaikudam BS
2010Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
2011For the Year 2027-2028(From 01.04.2027 to 31.03.2028)
2012Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
2013Leak and Burst works
2014Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2015200mm AC pipe
2016250mm AC pipe
2017250mm CI pipe
2018300mm CI pipe
2019Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2020200mm AC pipe
2021250mm AC pipe
2022250mm DI pipe
2023250mm CI pipe
2024300mm CI pipe
2025300mm DI pipe
202663mm PVC 4KSC pipe
202790mm PVC 4KSC Pipe
2028110mm PVC 4KSC Pipe
2029Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2030250mm AC pipe
2031250mm CI pipe
2032250mm DI pipe
2033300mm CI pipe
2034300mm DI pipe
2035Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2036300mm MS Pipe Below GL
2037300mm MS Pipe Above GL
2038Repairs & Renewals
2039Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
2040Repairing and reconditioning of 50 HP VT Motor including all material,labour,etc at Kodalikaruppur Headworks - Motor
2041Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2042Transportation charges for conveying the motor from the Station to Our work shop including loading and unloading charges.
2043Labour Charges for removing the two end side cover with fan arrangements and Dismantling the damaged NDE Side ball Bearing from the motor after removing the Rachet assembly load bearing safely and Fixing the New ball Bearing in the appropriate place with required lubricants without any damage to the motor shaft and winding after deducting the old damaged materials.
2044Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2045Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2046Supply and delivery of Non Driven End Deep Grove ball Bearing SKF Make suitable for the Squirrel Gage Induction Motor.
2047Labour Charges fixing the NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2048Repairing and reconditioning of 50 HP VT Pump including all material,labour,etc at Kodalikaruppur Headworks - Pump
2049Charges for Removing the Hollow shaft Squirrel cage Induction Motor after disconnecting the Power supply Cable, Discharge Head, Head Shaft and Stuffing Box by using contractor tools at Collector Well / Collection Sump
2050Charges for removing the all Column pipes of VT Pumpset each 1.5 m / 2.00 m to length and bowl assemblly for attending Pump repair works
2051Transportation charges for conveying the VT Pump bowl assembly from Collector Well Pump room to Work Shop including usage of trolley along the Foot bridge and Van
2052Reconditioning of Stuffing Box for providing bronze bush suitable for fixing thr Rope Gland and Head Shaft to avoid frequent damaging of rope and to avoid spreading of more leakage water from the Rope Gland including lath works etc., complete.
2053Charges for Lathe work of reconditioning of Pump SS Shaft with balancing, SS Bushes and sleeves, charges for Spider bore nd outer dimension phase out lath works, reconditioning of impeller and impeller ring & charges fixing the bearing and bronze bushes in the bowl assembly including correct setting of impeller allignment etc complete
2054Charges for reassembling the all Column pipes of Turbine Pump set and bowl assemblly after attending Pump repair works in the proper allignment after attending the cleaning and painting work in the coloumn pipe and body of the bowl assembly
2055Repairing and reconditioning of 50 HP VT Motor including all material,labour,etc at Kodalikaruppur Headworks - Materials Supply
2056Supply and Delivery of SS 410 New Pump Head Shaft for required mm and required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
2057Supply and Delivery of SS 410 New Pump Line Shaft for required mm and required length. (including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
2058Supply and delivery of stuffing box brone bush suitable for the Discharge Head assembly
2059Supply and Delivery of Required TVS Bolt , Nut and Washer for Bowl Assembly and all Column Pipe for inplace of Wornout Bolt and Nuts after deducting the cost of scrap materials and as Directed by TWAD Board Officers.
2060Supply and Delivery of Line shaft SS Coupling with Bush (including Raw Materials, Machining , Polishing etc., Complete)
2061Supply and Delivery of SS Sleeves Suitable for the Line Shaft for Inplace of Wornout SS Sleeves after deducting the cost of scrap materials as Directed by TWAD Board Officers.
2062Supply and Delivery of Spider Rubber Bush made in Hard Rubber and Finishing to Suit in Between the Casting Spider and Line shaft inplace of wornout Rubber Bush after deducting the cost of scrap materials as directed by TWAD Board Officers.
2063Supply and Delivery of Bronze Bush Bearing Suitable for Bowl Assembly and Pump Shaft inplace of wornout bronze Bush Bearing after deducting the cost of scrap materials as directed by TWAD Board Officers.
2064Supply and Delivery of 1.Bronze Bush Bearing Suitable for the Bowl Assembly (Top Side) 2. Bronze Bush Bearing Suitable for the Bell Mouth (Bottom) for inplace of wornout Bronze Bush Bearings after deducting the cost of scrap materials as Directed by TWAD Board Officers.
2065Supply and delivery of MS Seamless required size of Coloumn pipe suitable for the VT Pumpset
2066Supply and delivery of spider suitable for the coloumn pipe including cost of Raw Materials, welding, polishing etc., complete as directed by TWAD officers
2067Supply and delivery of new intermedia ring (Prosperous bronze metal) between bowl assembly and as directed by TWAD officers
2068Supply and delivery of new bowl shaft for required size for required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete) and as directed by TWAD officers
2069Supply and delivery of Top Load Bearing with Ratchet assembly including Required Grade lubricating components
2070Repairing and reconditioning of 20 HP Submersible openwell Pumpset at Kodalikaruppur HW - Motor
2071Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2072Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2073Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2074Transporting charges for Submersible pumpset
2075Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2076Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc at Udayarpalayam sump - Motor
2077Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2078Transportation charges for conveying the motor including loading and unloading charges.
2079Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2080Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2081Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2082Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2083Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2084Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc at Udayarpalayam sump - Pump
2085Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2086Transportation charges for conveying the Pump assembly including loading and unloading charges.
2087Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2088Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2089Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2090Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2091Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2092Supply and delivery of Driven End and Non Driven End bearings
2093Repairing and reconditioning of 50 HP HSCMotor including all material,labour,etc at Anaikudam Booster Station - Motor
2094Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2095Transportation charges for conveying the motor including loading and unloading charges.
2096Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2097Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2098Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2099Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2100Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2101Repairing and reconditioning of 50 HP HSCMotor including all material,labour,etc at Anaikudam Booster Station - Pump
2102Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2103Transportation charges for conveying the Pump including loading and unloading charges.
2104Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2105Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2106Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2107Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2108Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2109Supply and delivery of Driven End and Non Driven End bearings
2110Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour,etc
2111Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2112Transporting the pumpset.
2113Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2114Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2115Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2116Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2117Repair of Starter ATS 50 HP
2118Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
2119Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
2120Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
2121Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2122Supply and Delivery of PLA Safety Relay suitable for the starter
2123Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2124Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2125Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
2126Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
2127Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2128Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2129Repair of Starter ATS 20 HP
2130Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
2131Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
2132Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
2133Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2134Supply and Delivery of PLA Safety Relay suitable for the starter
2135Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2136Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2137Repair of Starter Star & Delta 12.50 HP
2138Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
2139Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2140Supply and Delivery of PLA Safety Relay suitable for the starter
2141Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2142Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
2143Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2144Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
2145Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2146Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
2147Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2148Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
2149Supply and delivery of the following Electrical works:consumable items
2150Volt meter SR 96 600 V-AC
2151Ammeter SR 96 5D/5A C.T.operated-AC
2152LED Outdoor fittings a)30 W LED street light fittings
2153Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
2154Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers.
215550mm Dia GI Pipe
215680mm Dia GI Pipe
2157Sump Cleaning
2158Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
21593.00 LL capacity of Collection sump @ Kodalikaruppur HW
21600.30 LL capacity of sump @ Anaikudam BS
2161Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
2162For the Year 2028-2029(From 01.04.2028 to 31.03.2029)
2163Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
2164Leak and Burst works
2165Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2166200mm AC pipe
2167250mm AC pipe
2168250mm CI pipe
2169300mm CI pipe
2170Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2171200mm AC pipe
2172250mm AC pipe
2173250mm DI pipe
2174250mm CI pipe
2175300mm CI pipe
2176300mm DI pipe
217763mm PVC 4KSC pipe
217890mm PVC 4KSC Pipe
2179110mm PVC 4KSC Pipe
2180Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2181250mm AC pipe
2182250mm CI pipe
2183250mm DI pipe
2184300mm CI pipe
2185300mm DI pipe
2186Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2187300mm MS Pipe Below GL
2188300mm MS Pipe Above GL
2189Repairs & Renewals
2190Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
2191Repairing and reconditioning of 50 HP VT Motor including all material,labour,etc at Kodalikaruppur Headworks - Motor
2192Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2193Transportation charges for conveying the motor from the Station to Our work shop including loading and unloading charges.
2194Labour Charges for removing the two end side cover with fan arrangements and Dismantling the damaged NDE Side ball Bearing from the motor after removing the Rachet assembly load bearing safely and Fixing the New ball Bearing in the appropriate place with required lubricants without any damage to the motor shaft and winding after deducting the old damaged materials.
2195Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2196Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2197Supply and delivery of Non Driven End Deep Grove ball Bearing SKF Make suitable for the Squirrel Gage Induction Motor.
2198Labour Charges fixing the NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2199Repairing and reconditioning of 50 HP VT Pump including all material,labour,etc at Kodalikaruppur Headworks - Pump
2200Charges for Removing the Hollow shaft Squirrel cage Induction Motor after disconnecting the Power supply Cable, Discharge Head, Head Shaft and Stuffing Box by using contractor tools at Collector Well / Collection Sump
2201Charges for removing the all Column pipes of VT Pumpset each 1.5 m / 2.00 m to length and bowl assemblly for attending Pump repair works
2202Transportation charges for conveying the VT Pump bowl assembly from Collector Well Pump room to Work Shop including usage of trolley along the Foot bridge and Van
2203Reconditioning of Stuffing Box for providing bronze bush suitable for fixing thr Rope Gland and Head Shaft to avoid frequent damaging of rope and to avoid spreading of more leakage water from the Rope Gland including lath works etc., complete.
2204Charges for Lathe work of reconditioning of Pump SS Shaft with balancing, SS Bushes and sleeves, charges for Spider bore nd outer dimension phase out lath works, reconditioning of impeller and impeller ring & charges fixing the bearing and bronze bushes in the bowl assembly including correct setting of impeller allignment etc complete
2205Charges for reassembling the all Column pipes of Turbine Pump set and bowl assemblly after attending Pump repair works in the proper allignment after attending the cleaning and painting work in the coloumn pipe and body of the bowl assembly
2206Repairing and reconditioning of 50 HP VT Motor including all material,labour,etc at Kodalikaruppur Headworks - Materials Supply
2207Supply and Delivery of SS 410 New Pump Head Shaft for required mm and required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
2208Supply and Delivery of SS 410 New Pump Line Shaft for required mm and required length. (including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
2209Supply and delivery of stuffing box brone bush suitable for the Discharge Head assembly
2210Supply and Delivery of Required TVS Bolt , Nut and Washer for Bowl Assembly and all Column Pipe for inplace of Wornout Bolt and Nuts after deducting the cost of scrap materials and as Directed by TWAD Board Officers.
2211Supply and Delivery of Line shaft SS Coupling with Bush (including Raw Materials, Machining , Polishing etc., Complete)
2212Supply and Delivery of SS Sleeves Suitable for the Line Shaft for Inplace of Wornout SS Sleeves after deducting the cost of scrap materials as Directed by TWAD Board Officers.
2213Supply and Delivery of Spider Rubber Bush made in Hard Rubber and Finishing to Suit in Between the Casting Spider and Line shaft inplace of wornout Rubber Bush after deducting the cost of scrap materials as directed by TWAD Board Officers.
2214Supply and Delivery of Bronze Bush Bearing Suitable for Bowl Assembly and Pump Shaft inplace of wornout bronze Bush Bearing after deducting the cost of scrap materials as directed by TWAD Board Officers.
2215Supply and Delivery of 1.Bronze Bush Bearing Suitable for the Bowl Assembly (Top Side) 2. Bronze Bush Bearing Suitable for the Bell Mouth (Bottom) for inplace of wornout Bronze Bush Bearings after deducting the cost of scrap materials as Directed by TWAD Board Officers.
2216Supply and delivery of MS Seamless required size of Coloumn pipe suitable for the VT Pumpset
2217Supply and delivery of spider suitable for the coloumn pipe including cost of Raw Materials, welding, polishing etc., complete as directed by TWAD officers
2218Supply and delivery of new intermedia ring (Prosperous bronze metal) between bowl assembly and as directed by TWAD officers
2219Supply and delivery of new bowl shaft for required size for required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete) and as directed by TWAD officers
2220Supply and delivery of Top Load Bearing with Ratchet assembly including Required Grade lubricating components
2221Repairing and reconditioning of 20 HP Submersible openwell Pumpset at Kodalikaruppur HW - Motor
2222Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2223Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2224Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2225Transporting charges for Submersible pumpset
2226Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2227Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc at Udayarpalayam sump - Motor
2228Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2229Transportation charges for conveying the motor including loading and unloading charges.
2230Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2231Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2232Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2233Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2234Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2235Repairing and reconditioning of 20 HP HSC Motor including all material,labour,etc at Udayarpalayam sump - Pump
2236Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2237Transportation charges for conveying the Pump assembly including loading and unloading charges.
2238Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2239Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2240Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2241Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2242Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2243Supply and delivery of Driven End and Non Driven End bearings
2244Repairing and reconditioning of 50 HP HSCMotor including all material,labour,etc at Anaikudam Booster Station - Motor
2245Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2246Transportation charges for conveying the motor including loading and unloading charges.
2247Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2248Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2249Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2250Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2251Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2252Repairing and reconditioning of 50 HP HSCMotor including all material,labour,etc at Anaikudam Booster Station - Pump
2253Charges for removing and reassembly the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2254Transportation charges for conveying the Pump including loading and unloading charges.
2255Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2256Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2257Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2258Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2259Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2260Supply and delivery of Driven End and Non Driven End bearings
2261Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour,etc
2262Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2263Transporting the pumpset.
2264Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2265Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2266Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2267Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2268Repair of Starter ATS 50 HP
2269Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
2270Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
2271Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
2272Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2273Supply and Delivery of PLA Safety Relay suitable for the starter
2274Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2275Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2276Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
2277Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
2278Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2279Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2280Repair of Starter ATS 20 HP
2281Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
2282Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
2283Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
2284Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2285Supply and Delivery of PLA Safety Relay suitable for the starter
2286Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2287Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2288Repair of Starter Star & Delta 12.50 HP
2289Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
2290Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2291Supply and Delivery of PLA Safety Relay suitable for the starter
2292Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2293Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
2294Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2295Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
2296Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2297Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
2298Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2299Supply and delivery of PVC Insulated 3 core flat type copper cable-6 sq.mm
2300Supply and delivery of the following Electrical works:consumable items
2301Volt meter SR 96 600 V-AC
2302Ammeter SR 96 5D/5A C.T.operated-AC
2303LED Outdoor fittings a)30 W LED street light fittings
2304Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
2305Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers.
230650mm Dia GI Pipe
230780mm Dia GI Pipe
2308Sump Cleaning
2309Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
23103.00 LL capacity of Collection sump @ Kodalikaruppur HW
23110.30 LL capacity of sump @ Anaikudam BS
2312Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
2313Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
2314For the Year 2026-2027 (From 01.01.2027 to 31.03.2027)
2315Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
2316Leak and Burst works
2317Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2318150mm AC pipe
2319200mm AC pipe
2320250mm AC pipe
2321350mm PSC pipe
2322400mm PSC pipe
2323450mm PSC pipe
2324600mm PSC pipe
2325Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
232650mm 6 ksc PVC Pipes
232763mm 4 ksc PVC Pipes
232875mm 4 ksc PVC Pipes
232990mm 4 ksc PVC Pipes
2330110mm 4 ksc PVC Pipes
2331140mm 4 ksc PVC Pipes
2332160mm 4 ksc PVC Pipes
2333150mm AC pipe
2334200mm AC pipe
2335250mm AC pipe
2336350mm PSC pipe
2337400mm PSC pipe
2338450mm PSC pipe
2339600mm PSC pipe
234063mm HDPE PN6
234175mm HDPE PN6
234290mm HDPE PN6
2343110mm HDPE PN6
2344140mm HDPE PN6
2345160mm HDPE PN6
2346200mm HDPE PN6
2347250mm HDPE PN6
2348Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
234950mm 6 ksc PVC Pipes
235063mm 4 ksc PVC Pipes
235175mm 4 ksc PVC Pipes
235290mm 4 ksc PVC Pipes
2353110mm 4 ksc PVC Pipes
2354140mm 4 ksc PVC Pipes
2355160mm 4 ksc PVC Pipes
2356150mm AC pipe
2357200mm AC pipe
2358250mm AC pipe
2359350mm PSC pipe
2360400mm PSC pipe
2361450mm PSC pipe
2362600mm PSC pipe
236363mm HDPE PN6
236475mm HDPE PN6
236590mm HDPE PN6
2366110mm HDPE PN6
2367140mm HDPE PN6
2368160mm HDPE PN6
2369200mm HDPE PN6
2370250mm HDPE PN6
2371Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2372MS Pipe Leak Below GL
2373300mm MS Pipe
2374350mm MS Pipe
2375400 mm MS pipe
2376450 mm MS pipe
2377600 mm MS pipe
2378MS Pipe Leak Above GL
2379300mm MS Pipe
2380350mm MS Pipe
2381400 mm MS pipe
2382450 mm MS pipe
2383600 mm MS pipe
2384Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
2385Repairing and reconditioning of 125 HP VT Motor with replacement of motor including all material, labour etc.,
2386Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2387Transportation charges for conveying the motor from the Station to Our work shop including loading and unloading charges.
2388Labour Charges for removing the two end side cover with fan arrangements and Dismantling the damaged NDE Side ball Bearing from the motor after removing the Rachet assembly load bearing safely and Fixing the New ball Bearing in the appropriate place with required lubricants without any damage to the motor shaft and winding after deducting the old damaged materials.
2389Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2390Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2391Supply and delivery of Non Driven End Deep Grove ball Bearing SKF Make suitable for the Squirrel Gage Induction Motor.
2392Labour Charges fixing the NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2393Transportation charges for conveying the motor from work shop to pumping Station
2394Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
2395Repairing and reconditioning of 125 HP VT Pump labour charges,etc
2396Charges for Removing the Hollow shaft Squirrel cage Induction Motor after disconnecting the Power supply Cable, Discharge Head, Head Shaft and Stuffing Box by using contractor tools at Collector Well / Collection Sump
2397Charges for removing the all Column pipes of VT Pumpset each 1.5 m / 2.00 m to length and bowl assemblly for attending Pump repair works
2398Transportation charges for conveying the VT Pump bowl assembly from Collector Well Pump room to Work Shop including usage of trolley along the Foot bridge and Van
2399Reconditioning of Stuffing Box for providing bronze bush suitable for fixing thr Rope Gland and Head Shaft to avoid frequent damaging of rope and to avoid spreading of more leakage water from the Rope Gland including lath works etc., complete.
2400Charges for Lathe work of reconditioning of Pump SS Shaft with balancing, SS Bushes and sleeves, charges for Spider bore nd outer dimension phase out lath works, reconditioning of impeller and impeller ring & charges fixing the bearing and bronze bushes in the bowl assembly including correct setting of impeller allignment etc complete
2401Transportation charges for conveying the VT Pump bowl assembly from our work shop to Collector Well Pump room including usage of trolley along the Foot bridge and Van
2402Charges for reassembling the all Column pipes of Turbine Pump set and bowl assemblly after attending Pump repair works in the proper allignment after attending the cleaning and painting work in the coloumn pipe and body of the bowl assembly
2403Re errection of reconditioned stuffing box, new Head shaft, Discharge head and Motor, fixing the Rachet load bearing assembly including filling of required 90 grade oil and Connecting the 440V AC incoming Cable to the Motor Terminal and fixing new rope in the rope gland and Checking Motor Pumpset Alignment and Rotation and testing with load etc.,Complete
2404Repair works of 125 HP VT Pump (Supply of Materials)
2405Supply and Delivery of SS 410 New Pump Head Shaft for required mm and required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
2406Supply and Delivery of SS 410 New Pump Line Shaft for required mm and required length. (including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
2407Supply and delivery of stuffing box brone bush suitable for the Discharge Head assembly
2408Supply and Delivery of Required TVS Bolt , Nut and Washer for Bowl Assembly and all Column Pipe for inplace of Wornout Bolt and Nuts after deducting the cost of scrap materials and as Directed by TWAD Board Officers.
2409Supply and Delivery of Line shaft SS Coupling with Bush (including Raw Materials, Machining , Polishing etc., Complete)
2410Supply and Delivery of SS Sleeves Suitable for the Line Shaft for Inplace of Wornout SS Sleeves after deducting the cost of scrap materials as Directed by TWAD Board Officers.
2411Supply and Delivery of Spider Rubber Bush made in Hard Rubber and Finishing to Suit in Between the Casting Spider and Line shaft inplace of wornout Rubber Bush after deducting the cost of scrap materials as directed by TWAD Board Officers.
2412Supply and Delivery of Bronze Bush Bearing Suitable for Bowl Assembly and Pump Shaft inplace of wornout bronze Bush Bearing after deducting the cost of scrap materials as directed by TWAD Board Officers.
2413Supply and Delivery of 1.Bronze Bush Bearing Suitable for the Bowl Assembly (Top Side) 2. Bronze Bush Bearing Suitable for the Bell Mouth (Bottom) for inplace of wornout Bronze Bush Bearings after deducting the cost of scrap materials as Directed by TWAD Board Officers.
2414Supply and delivery of MS Seamless required size of Coloumn pipe suitable for the VT Pumpset
2415Supply and delivery of spider suitable for the coloumn pipe including cost of Raw Materials, welding, polishing etc., complete as directed by TWAD officers
2416Supply and delivery of new intermedia ring (Prosperous bronze metal) between bowl assembly and as directed by TWAD officers
2417Supply and delivery of new bowl shaft for required size for required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete) and as directed by TWAD officers
2418Supply and delivery of Top Load Bearing with Ratchet assembly including Required Grade lubricating components
2419Repairing and reconditioning of 7.5 HP Openwell submersible Pumpset including all material, labour etc.,
2420Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2421Transporting the pumpset from Pump House to work shop.
2422Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2423Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2424Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2425Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
2426Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2427Repairing and reconditioning of 167.50 HP HSC Motor including all material,labour,etc
2428Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2429Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
2430Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2431Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2432Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2433Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2434Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2435Transportation charges for conveying the motor from work shop to Pumping Station
2436Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
2437Repairing and reconditioning of 167.50 HP HSC Pump including all material,labour,etc
2438Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2439Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
2440Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2441Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2442Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2443Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2444Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2445Supply and delivery of Driven End and Non Driven End bearings
2446Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2447Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
2448Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
2449Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
2450Attending the repair works in 11 KV/ 433 V Transformer - 315KVA at T.Palur Booster
2451Charges for removing the Transformer from the plinth after disconnecting the incomming & outgoing supply terminations, earthing, neutral connection in the Transformer loading to vehicle with mobile grane and conveying to workshop unloading the transformer with mobile crane as per site condition and as directed by TWAD Board Officers.
2452Charges for disconnecting the incomming & outgoing (LT & HT Side) supply terminations, earthing, neutral connection in the Transformer and drain out the oil from the conservator Tank and Transformer tank up to the required level and stacking the containers to attend the repair works/ Oil leakages and as directed by TWAD Board Officers.
2453Charges Opening the Transformer Top cover after disconnecting the inside terminal connections, weakening / damaged bushes, brash stud bolt & Nuts and lifting Transformer core & winding without damages etc., complete.
2454Charges for cleaning the winding coils of the Transformer free from moisture and cleaning the inside walls of the Transformer by using required new Transformer oil without any damage to the Transformer Coil
2455Charges for fixing the required capacity brass LT terminal bush 3nos, copper connecting plate,3 nos using necessary bushes, screws bolt nuts etc., complete
2456Charges for re-fixing the Transformer Top cover with conservator tank on the Transformer and connecting with all inside terminal connections including HT terminals by using required bolt & nuts and filling the tapped oil upto the mark of level indicator and charging the transformers, testing with load etc., complete
2457Charges for rewinding of Three phase of 11KV/22KV/ 433V Transformer in the suitable core assembly including charges for removing the burnt coil and allining of core assembly and including required insulating materials etc complete after deducting the cost burned scrap.
2458Charges for improving of IR Value of Transformer using electric oven - Heat Champer (LT winding, HT winding and Transformer core) etc., complete as directed by TWAD Board officers.
2459Charges for two coats of painting the Transformer as directed by TWAD Board officers.
2460Charges for two coats of painting the 6 Pole Structure and yard fencing etc,. complete as directed by TWAD Board officers.
2461Charges for Eart Pit Value Checking with Certificate
2462Charges for 11KV/433V Transformer loading to vehicle with mobile grane and conveying to Pumphouse Unloading the above transformer with mobile crane Re-erection of transformer with cable termination earthing and neutral connection testing of No Load and Load testing at pumphouse as per site condition and existing arrangements and as directed by TWAD Board Officers.
2463Charges for transformer oil filtration using hot air vacuum filtering unit up to the required BDV value and submitting test result of both BDV and Acidity etc .complete and as directed by TWAD board officers.
2464Supply and delivery of required size of LT Brass rod with terminal bushing with 4 no of nuts, washers and insulating sleeves etc., complete
2465Supply and delivery of required capacity copper,connecting plate for cable termination .
2466Supply and delivery of required size copper HT terminal rod with Bushing and required Bolt & Nuts with washers
2467Supply and Delivery of Cork Packing Sheet, Cork Bush for LT and HT side, oil level Indicator as directed by TWAD Board officers after deducting the cost of old scraps
2468Supply and delivery of new LT/HT Coil made EC Grade DP coveriong copper wire for winding of 11KV/22KV/433V Transformer and required insulating materials etc., complete
2469Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
2470Supply and delivery of Drop Out fuse fixing unit set
2471Supply, delivery and fixing of Drop Out fuse Top Contact and bottom Contact
2472Supply and delivery of Breather with Silica gel of required size for the Transfomer
2473Supply and delivery of Silica gel
2474Supply and delivery of 11 KV / 22 KV Lightning Arrestor
2475Repairing and reconditioning of 125 HP HSC Motor including all material,labour,etc
2476Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2477Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
2478Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2479Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2480Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2481Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2482Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2483Transportation charges for conveying the motor from work shop to Pumping Station
2484Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
2485Repairing and reconditioning of 125 HP HSC Pump including all material, labour etc.,
2486Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2487Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
2488Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2489Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2490Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2491Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2492Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2493Supply and delivery of Driven End and Non Driven End bearings
2494Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2495Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
2496Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
2497Attending the repair works in 11 KV/ 433 V Transformer - 200KVA at Jayankondam Booster
2498Charges for removing the Transformer from the plinth after disconnecting the incomming & outgoing supply terminations, earthing, neutral connection in the Transformer loading to vehicle with mobile grane and conveying to workshop unloading the transformer with mobile crane as per site condition and as directed by TWAD Board Officers.
2499Charges for disconnecting the incomming & outgoing (LT & HT Side) supply terminations, earthing, neutral connection in the Transformer and drain out the oil from the conservator Tank and Transformer tank up to the required level and stacking the containers to attend the repair works/ Oil leakages and as directed by TWAD Board Officers.
2500Charges Opening the Transformer Top cover after disconnecting the inside terminal connections, weakening / damaged bushes, brash stud bolt & Nuts and lifting Transformer core & winding without damages etc., complete.
2501Charges for cleaning the winding coils of the Transformer free from moisture and cleaning the inside walls of the Transformer by using required new Transformer oil without any damage to the Transformer Coil
2502Charges for fixing the required capacity brass LT terminal bush 3nos, copper connecting plate,3 nos using necessary bushes, screws bolt nuts etc., complete
2503Charges for re-fixing the Transformer Top cover with conservator tank on the Transformer and connecting with all inside terminal connections including HT terminals by using required bolt & nuts and filling the tapped oil upto the mark of level indicator and charging the transformers, testing with load etc., complete
2504Charges for rewinding of Three phase of 11KV/22KV/ 433V Transformer in the suitable core assembly including charges for removing the burnt coil and allining of core assembly and including required insulating materials etc complete after deducting the cost burned scrap.
2505Charges for improving of IR Value of Transformer using electric oven - Heat Champer (LT winding, HT winding and Transformer core) etc., complete as directed by TWAD Board officers.
2506Charges for two coats of painting the Transformer as directed by TWAD Board officers.
2507Charges for two coats of painting the 6 Pole Structure and yard fencing etc,. complete as directed by TWAD Board officers.
2508Charges for Eart Pit Value Checking with Certificate
2509Charges for 11KV/433V Transformer loading to vehicle with mobile grane and conveying to Pumphouse Unloading the above transformer with mobile crane Re-erection of transformer with cable termination earthing and neutral connection testing of No Load and Load testing at pumphouse as per site condition and existing arrangements and as directed by TWAD Board Officers.
2510Charges for transformer oil filtration using hot air vacuum filtering unit up to the required BDV value and submitting test result of both BDV and Acidity etc .complete and as directed by TWAD board officers.
2511Supply and delivery of required size of LT Brass rod with terminal bushing with 4 no of nuts, washers and insulating sleeves etc., complete
2512Supply and delivery of required capacity copper,connecting plate for cable termination .
2513Supply and delivery of required size copper HT terminal rod with Bushing and required Bolt & Nuts with washers
2514Supply and Delivery of Cork Packing Sheet, Cork Bush for LT and HT side, oil level Indicator as directed by TWAD Board officers after deducting the cost of old scraps
2515Supply and delivery of new LT/HT Coil made EC Grade DP coveriong copper wire for winding of 11KV/22KV/433V Transformer and required insulating materials etc., complete
2516Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
2517Supply and delivery of Drop Out fuse fixing unit set
2518Supply, delivery and fixing of Drop Out fuse Top Contact and bottom Contact
2519Supply and delivery of Breather with Silica gel of required size for the Transfomer
2520Supply and delivery of Silica gel
2521Supply and delivery of 11 KV / 22 KV Lightning Arrestor
2522Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
2523Repairing and reconditioning of 30 HP HSC Motor including all material, labour etc.,
2524Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2525Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
2526Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2527Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2528Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2529Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2530Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2531Transportation charges for conveying the motor from work shop to Pumping Station
2532Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
2533Repairing and reconditioning of 30 HP HSC Pump including all material, labour etc.,
2534Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2535Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
2536Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2537Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2538Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2539Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2540Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2541Supply and delivery of Driven End and Non Driven End bearings
2542Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2543Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
2544Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
2545Repairing and reconditioning of 40 HP HSC Motor including all material, labour etc.,
2546Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2547Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
2548Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2549Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2550Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2551Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2552Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2553Transportation charges for conveying the motor from work shop to Pumping Station
2554Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
2555Repairing and reconditioning of 40 HP HSC Pump including all material, labour etc., at Variyankaval Hospital sump
2556Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2557Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
2558Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2559Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2560Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2561Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2562Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2563Supply and delivery of Driven End and Non Driven End bearings
2564Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2565Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
2566Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
2567Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour etc.,
2568Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2569Transporting the pumpset from Pump House to work shop.
2570Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2571Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2572Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2573Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
2574Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2575Repairing and reconditioning of 15 HP Monoblock Pumpset including all material, labour, etc.,
2576Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
2577Transporting the pumpset from the Pumping Station to work shop.
2578Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
2579Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
2580Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2581Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
2582Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
2583Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
2584Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
2585Repairing and reconditioning of 3HP Submersible Pumpset including all material, labour etc.,
2586Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2587Transporting the pumpset from Pump House to work shop.
2588Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2589Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2590Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2591Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
2592Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2593Repairing and reconditioning of 20 HP Submersible Pumpset including all material, labour etc.,
2594Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2595Transporting the pumpset from Pump House to work shop.
2596Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2597Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2598Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2599Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
2600Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2601Repairing and reconditioning of 5HP Centrifugal Pumpset including all material, labour etc.,
2602Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
2603Transporting the pumpset from the Pumping Station to work shop.
2604Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
2605Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
2606Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2607Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
2608Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
2609Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
2610Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
2611Repairing and reconditioning of 5HP Submersible Pumpset including all material, labour, etc at Edaiyakuruchi
2612Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2613Transporting the pumpset from Pump House to work shop.
2614Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2615Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2616Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2617Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
2618Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2619Repairing and reconditioning of 7.50 HP Centrifugal Pumpset including all material, labour etc.,
2620Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
2621Transporting the pumpset from the Pumping Station to work shop.
2622Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
2623Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
2624Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2625Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
2626Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
2627Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
2628Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
2629Repairing and reconditioning of 2HP Monoblock Pumpset including all material, labour etc.,
2630Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
2631Transporting the pumpset from the Pumping Station to work shop.
2632Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
2633Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
2634Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2635Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
2636Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
2637Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
2638Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
2639Repairing and reconditioning of 2HP Submersible Pumpset including all material, labour etc.,
2640Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2641Transporting the pumpset from Pump House to work shop.
2642Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2643Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2644Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2645Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
2646Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2647Repairing and reconditioning of 1HP Monoblock Pumpset including all material, labour etc.,
2648Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
2649Transporting the pumpset from the Pumping Station to work shop.
2650Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
2651Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
2652Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2653Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
2654Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
2655Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
2656Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
2657Repairing and reconditioning of 3 HP Monoblock Pumpset including all material, labour etc.,
2658Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
2659Transporting the pumpset from the Pumping Station to work shop.
2660Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
2661Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
2662Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2663Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
2664Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
2665Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
2666Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
2667Attending repair works in Soft starter 145 HP
2668Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
2669Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
2670Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
2671Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
2672Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2673Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
2674Supply and Delivery of PLA Safety Relay suitable for the starter
2675Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2676Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2677Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
2678Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
2679Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2680Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2681Attending repair works in Soft starter 190 HP
2682Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
2683Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
2684Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
2685Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
2686Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2687Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
2688Supply and Delivery of PLA Safety Relay suitable for the starter
2689Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2690Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2691Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
2692Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
2693Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2694Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2695Attending repair works in ATS starter 40 HP
2696Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
2697Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
2698Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
2699Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
2700Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2701Supply and Delivery of PLA Safety Relay suitable for the starter
2702Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2703Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2704Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2705Attending repair works in ATS starter 30 HP
2706Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
2707Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
2708Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
2709Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
2710Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2711Supply and Delivery of PLA Safety Relay suitable for the starter
2712Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2713Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2714Attending repair works in Star Delta starter 20 HP
2715Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
2716Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2717Supply and Delivery of PLA Safety Relay suitable for the starter
2718Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2719Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
2720Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2721Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
2722Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2723Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
2724Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2725Attending repair works in Star Delta starter 12.5 HP
2726Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
2727Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2728Supply and Delivery of PLA Safety Relay suitable for the starter
2729Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2730Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
2731Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2732Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
2733Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2734Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
2735Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2736Attending repair works in Star Delta starter 7.5 HP
2737Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
2738Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2739Supply and Delivery of PLA Safety Relay suitable for the starter
2740Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
2741Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
2742Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2743Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
2744Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
2745Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
2746Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2747Attending repair works in DOL starter 5 HP
2748Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
2749Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2750Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2751Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
2752Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2753Attending repair works in DOL starter 3 HP
2754Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
2755Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2756Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2757Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
2758Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2759Attending repair works in DOL starter 2 HP
2760Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
2761Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2762Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2763Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
2764Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2765Attending repair works in DOL starter 1 HP
2766Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
2767Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
2768Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
2769Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
2770Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
2771Supply and delivery of PVC Insulated 3 core flat type copper cable - 6 sq.mm
2772Supply and delivery of the following Electrical works:consumable items
2773Volt meter SR 96 600 V-AC
2774Ammeter SR 96 5D/5A C.T.operated-AC
2775LED Outdoor fittings a)30 W LED street light fittings
2776Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
2777Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers.
277850mm GI Pipe
277965mm GI Pipe
278080mm GI Pipe
2781100mm GI Pipe
2782Charges for Repair and Reconditioning of the Sluice Valves and Air Valves fixed in the Pumping Main, Feeder Main and Branch Main including cost of all materials and labour charges etc., complete
2783300mm Sluice Valve
2784250mm Sluice Valve
2785200mm Sluice Valve
2786150mm Sluice Valve
2787100mm Sluice Valve
278880mm Sluice Valve
2789Replacement of non functioning unserviceble Gun Metal Gate valve without affecting existing alignment by using contractor tools excluding the cost of valve but including required length of GI nipple, coupling etc., complete
279080mm GM Valve
279165mm GM Valve
279250mm GM Valve
2793Repair and Reconditioning of the Double Air Valve / Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
2794100mm Air Valve
279580mm Air Valve
279650mm Air Valve
279725mm Air Valve
2798Sump Cleaning
2799Charges for cleaning the sumps of TWAD Board by clearing the sludge and disposing it to near by boundary of the sump site including baling out the sludge water by using diesel pumpset of required capacity and removing the algae and scaling by scrapping, flushing the sump finally with bleaching powder and spreading bleaching powder around the sump , etc., complete and as directed by the departmental officers
28001.00 LL capacity of sump @ Thoothur
28018.00 LL capacity of sump @ T,Palur Booster
28020.20 LL capacity of sump @ Angarayanallur
28038.00 LL capacity of sump @ Jayankondam Booster
28040.20 LL capacity of sump @ Elaiyur Mariamman koil
28050.20 LL capacity of sump @ Elaiyur Colony
28060.20 LL capacity of sump @ Variyankaval East
28071.00 LL capacity of sump @ Variyankaval GH
28081.50 LL capacity of sump @ Devanur
28091.00 LL capacity of sump @ Kuvagam
28102.00 LL capacity of sump @ Edayakurichi
28112.00 LL capacity of sump @ Agneespuram
28122.00 LL capacity of sump @ Koovathur
28131.00 LL capacity of sump @ Ayyur
28142.00 LL capacity of sump @ Kumilakuzhi
28151.00 LL capacity of sump @ Silambur
28161.00 LL capacity of sump @ Pukkuzhi
28170.60LL capacity of sump @ Alagapuram OHT
28182.00 LL capacity of sump @ Alagapuram Naidu Street
28190.60 LL capacity of sump @ Alagapuram Colony
28201.00 LL capacity of sump @ Agaram
28211.00 LL capacity of sump @ Kavarapalayam
28220.30 LL capacity of sump @ Manakollai
2823Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
2824For the Year 2027-2028(From 01.04.2027 to 31.03.2028)
2825Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
2826Leak and Burst works
2827Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2828150mm AC pipe
2829200mm AC pipe
2830250mm AC pipe
2831350mm PSC pipe
2832400mm PSC pipe
2833450mm PSC pipe
2834600mm PSC pipe
2835Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
283650mm 6 ksc PVC Pipes
283763mm 4 ksc PVC Pipes
283875mm 4 ksc PVC Pipes
283990mm 4 ksc PVC Pipes
2840110mm 4 ksc PVC Pipes
2841140mm 4 ksc PVC Pipes
2842160mm 4 ksc PVC Pipes
2843150mm AC pipe
2844200mm AC pipe
2845250mm AC pipe
2846350mm PSC pipe
2847400mm PSC pipe
2848450mm PSC pipe
2849600mm PSC pipe
285063mm HDPE PN6
285175mm HDPE PN6
285290mm HDPE PN6
2853110mm HDPE PN6
2854140mm HDPE PN6
2855160mm HDPE PN6
2856200mm HDPE PN6
2857250mm HDPE PN6
2858Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
285950mm 6 ksc PVC Pipes
286063mm 4 ksc PVC Pipes
286175mm 4 ksc PVC Pipes
286290mm 4 ksc PVC Pipes
2863110mm 4 ksc PVC Pipes
2864140mm 4 ksc PVC Pipes
2865160mm 4 ksc PVC Pipes
2866150mm AC pipe
2867200mm AC pipe
2868250mm AC pipe
2869350mm PSC pipe
2870400mm PSC pipe
2871450mm PSC pipe
2872600mm PSC pipe
287363mm HDPE PN6
287475mm HDPE PN6
287590mm HDPE PN6
2876110mm HDPE PN6
2877140mm HDPE PN6
2878160mm HDPE PN6
2879200mm HDPE PN6
2880250mm HDPE PN6
2881Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
2882MS Pipe Leak Below GL
2883300mm MS Pipe
2884350mm MS Pipe
2885400 mm MS pipe
2886450 mm MS pipe
2887600 mm MS pipe
2888MS Pipe Leak Above GL
2889300mm MS Pipe
2890350mm MS Pipe
2891400 mm MS pipe
2892450 mm MS pipe
2893600 mm MS pipe
2894Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
2895Repairing and reconditioning of 125 HP VT Motor with replacement of motor including all material, labour etc.,
2896Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2897Transportation charges for conveying the motor from the Station to Our work shop including loading and unloading charges.
2898Labour Charges for removing the two end side cover with fan arrangements and Dismantling the damaged NDE Side ball Bearing from the motor after removing the Rachet assembly load bearing safely and Fixing the New ball Bearing in the appropriate place with required lubricants without any damage to the motor shaft and winding after deducting the old damaged materials.
2899Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2900Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2901Supply and delivery of Non Driven End Deep Grove ball Bearing SKF Make suitable for the Squirrel Gage Induction Motor.
2902Labour Charges fixing the NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2903Transportation charges for conveying the motor from work shop to pumping Station
2904Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
2905Repairing and reconditioning of 125 HP VT Pump labour charges,etc
2906Charges for Removing the Hollow shaft Squirrel cage Induction Motor after disconnecting the Power supply Cable, Discharge Head, Head Shaft and Stuffing Box by using contractor tools at Collector Well / Collection Sump
2907Charges for removing the all Column pipes of VT Pumpset each 1.5 m / 2.00 m to length and bowl assemblly for attending Pump repair works
2908Transportation charges for conveying the VT Pump bowl assembly from Collector Well Pump room to Work Shop including usage of trolley along the Foot bridge and Van
2909Reconditioning of Stuffing Box for providing bronze bush suitable for fixing thr Rope Gland and Head Shaft to avoid frequent damaging of rope and to avoid spreading of more leakage water from the Rope Gland including lath works etc., complete.
2910Charges for Lathe work of reconditioning of Pump SS Shaft with balancing, SS Bushes and sleeves, charges for Spider bore nd outer dimension phase out lath works, reconditioning of impeller and impeller ring & charges fixing the bearing and bronze bushes in the bowl assembly including correct setting of impeller allignment etc complete
2911Transportation charges for conveying the VT Pump bowl assembly from our work shop to Collector Well Pump room including usage of trolley along the Foot bridge and Van
2912Charges for reassembling the all Column pipes of Turbine Pump set and bowl assemblly after attending Pump repair works in the proper allignment after attending the cleaning and painting work in the coloumn pipe and body of the bowl assembly
2913Re errection of reconditioned stuffing box, new Head shaft, Discharge head and Motor, fixing the Rachet load bearing assembly including filling of required 90 grade oil and Connecting the 440V AC incoming Cable to the Motor Terminal and fixing new rope in the rope gland and Checking Motor Pumpset Alignment and Rotation and testing with load etc.,Complete
2914Repair works of 125 HP VT Pump (Supply of Materials)
2915Supply and Delivery of SS 410 New Pump Head Shaft for required mm and required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
2916Supply and Delivery of SS 410 New Pump Line Shaft for required mm and required length. (including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
2917Supply and delivery of stuffing box brone bush suitable for the Discharge Head assembly
2918Supply and Delivery of Required TVS Bolt , Nut and Washer for Bowl Assembly and all Column Pipe for inplace of Wornout Bolt and Nuts after deducting the cost of scrap materials and as Directed by TWAD Board Officers.
2919Supply and Delivery of Line shaft SS Coupling with Bush (including Raw Materials, Machining , Polishing etc., Complete)
2920Supply and Delivery of SS Sleeves Suitable for the Line Shaft for Inplace of Wornout SS Sleeves after deducting the cost of scrap materials as Directed by TWAD Board Officers.
2921Supply and Delivery of Spider Rubber Bush made in Hard Rubber and Finishing to Suit in Between the Casting Spider and Line shaft inplace of wornout Rubber Bush after deducting the cost of scrap materials as directed by TWAD Board Officers.
2922Supply and Delivery of Bronze Bush Bearing Suitable for Bowl Assembly and Pump Shaft inplace of wornout bronze Bush Bearing after deducting the cost of scrap materials as directed by TWAD Board Officers.
2923Supply and Delivery of 1.Bronze Bush Bearing Suitable for the Bowl Assembly (Top Side) 2. Bronze Bush Bearing Suitable for the Bell Mouth (Bottom) for inplace of wornout Bronze Bush Bearings after deducting the cost of scrap materials as Directed by TWAD Board Officers.
2924Supply and delivery of MS Seamless required size of Coloumn pipe suitable for the VT Pumpset
2925Supply and delivery of spider suitable for the coloumn pipe including cost of Raw Materials, welding, polishing etc., complete as directed by TWAD officers
2926Supply and delivery of new intermedia ring (Prosperous bronze metal) between bowl assembly and as directed by TWAD officers
2927Supply and delivery of new bowl shaft for required size for required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete) and as directed by TWAD officers
2928Supply and delivery of Top Load Bearing with Ratchet assembly including Required Grade lubricating components
2929Repairing and reconditioning of 7.5 HP Openwell submersible Pumpset including all material, labour etc.,
2930Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
2931Transporting the pumpset from Pump House to work shop.
2932Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
2933Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
2934Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
2935Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
2936Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
2937Repairing and reconditioning of 167.50 HP HSC Motor including all material,labour,etc
2938Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2939Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
2940Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2941Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2942Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2943Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2944Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2945Transportation charges for conveying the motor from work shop to Pumping Station
2946Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
2947Repairing and reconditioning of 167.50 HP HSC Pump including all material,labour,etc
2948Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2949Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
2950Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2951Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
2952Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
2953Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
2954Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
2955Supply and delivery of Driven End and Non Driven End bearings
2956Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2957Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
2958Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
2959Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
2960Attending the repair works in 11 KV/ 433 V Transformer - 315KVA at T.Palur Booster
2961Charges for removing the Transformer from the plinth after disconnecting the incomming & outgoing supply terminations, earthing, neutral connection in the Transformer loading to vehicle with mobile grane and conveying to workshop unloading the transformer with mobile crane as per site condition and as directed by TWAD Board Officers.
2962Charges for disconnecting the incomming & outgoing (LT & HT Side) supply terminations, earthing, neutral connection in the Transformer and drain out the oil from the conservator Tank and Transformer tank up to the required level and stacking the containers to attend the repair works/ Oil leakages and as directed by TWAD Board Officers.
2963Charges Opening the Transformer Top cover after disconnecting the inside terminal connections, weakening / damaged bushes, brash stud bolt & Nuts and lifting Transformer core & winding without damages etc., complete.
2964Charges for cleaning the winding coils of the Transformer free from moisture and cleaning the inside walls of the Transformer by using required new Transformer oil without any damage to the Transformer Coil
2965Charges for fixing the required capacity brass LT terminal bush 3nos, copper connecting plate,3 nos using necessary bushes, screws bolt nuts etc., complete
2966Charges for re-fixing the Transformer Top cover with conservator tank on the Transformer and connecting with all inside terminal connections including HT terminals by using required bolt & nuts and filling the tapped oil upto the mark of level indicator and charging the transformers, testing with load etc., complete
2967Charges for rewinding of Three phase of 11KV/22KV/ 433V Transformer in the suitable core assembly including charges for removing the burnt coil and allining of core assembly and including required insulating materials etc complete after deducting the cost burned scrap.
2968Charges for improving of IR Value of Transformer using electric oven - Heat Champer (LT winding, HT winding and Transformer core) etc., complete as directed by TWAD Board officers.
2969Charges for two coats of painting the Transformer as directed by TWAD Board officers.
2970Charges for two coats of painting the 6 Pole Structure and yard fencing etc,. complete as directed by TWAD Board officers.
2971Charges for Eart Pit Value Checking with Certificate
2972Charges for 11KV/433V Transformer loading to vehicle with mobile grane and conveying to Pumphouse Unloading the above transformer with mobile crane Re-erection of transformer with cable termination earthing and neutral connection testing of No Load and Load testing at pumphouse as per site condition and existing arrangements and as directed by TWAD Board Officers.
2973Charges for transformer oil filtration using hot air vacuum filtering unit up to the required BDV value and submitting test result of both BDV and Acidity etc .complete and as directed by TWAD board officers.
2974Supply and delivery of required size of LT Brass rod with terminal bushing with 4 no of nuts, washers and insulating sleeves etc., complete
2975Supply and delivery of required capacity copper,connecting plate for cable termination .
2976Supply and delivery of required size copper HT terminal rod with Bushing and required Bolt & Nuts with washers
2977Supply and Delivery of Cork Packing Sheet, Cork Bush for LT and HT side, oil level Indicator as directed by TWAD Board officers after deducting the cost of old scraps
2978Supply and delivery of new LT/HT Coil made EC Grade DP coveriong copper wire for winding of 11KV/22KV/433V Transformer and required insulating materials etc., complete
2979Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
2980Supply and delivery of Drop Out fuse fixing unit set
2981Supply, delivery and fixing of Drop Out fuse Top Contact and bottom Contact
2982Supply and delivery of Breather with Silica gel of required size for the Transfomer
2983Supply and delivery of Silica gel
2984Supply and delivery of 11 KV / 22 KV Lightning Arrestor
2985Repairing and reconditioning of 125 HP HSC Motor including all material,labour,etc
2986Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
2987Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
2988Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
2989Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
2990Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
2991Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
2992Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
2993Transportation charges for conveying the motor from work shop to Pumping Station
2994Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
2995Repairing and reconditioning of 125 HP HSC Pump including all material, labour etc.,
2996Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
2997Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
2998Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
2999Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
3000Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
3001Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
3002Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
3003Supply and delivery of Driven End and Non Driven End bearings
3004Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3005Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
3006Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
3007Attending the repair works in 11 KV/ 433 V Transformer - 200KVA at Jayankondam Booster
3008Charges for removing the Transformer from the plinth after disconnecting the incomming & outgoing supply terminations, earthing, neutral connection in the Transformer loading to vehicle with mobile grane and conveying to workshop unloading the transformer with mobile crane as per site condition and as directed by TWAD Board Officers.
3009Charges for disconnecting the incomming & outgoing (LT & HT Side) supply terminations, earthing, neutral connection in the Transformer and drain out the oil from the conservator Tank and Transformer tank up to the required level and stacking the containers to attend the repair works/ Oil leakages and as directed by TWAD Board Officers.
3010Charges Opening the Transformer Top cover after disconnecting the inside terminal connections, weakening / damaged bushes, brash stud bolt & Nuts and lifting Transformer core & winding without damages etc., complete.
3011Charges for cleaning the winding coils of the Transformer free from moisture and cleaning the inside walls of the Transformer by using required new Transformer oil without any damage to the Transformer Coil
3012Charges for fixing the required capacity brass LT terminal bush 3nos, copper connecting plate,3 nos using necessary bushes, screws bolt nuts etc., complete
3013Charges for re-fixing the Transformer Top cover with conservator tank on the Transformer and connecting with all inside terminal connections including HT terminals by using required bolt & nuts and filling the tapped oil upto the mark of level indicator and charging the transformers, testing with load etc., complete
3014Charges for rewinding of Three phase of 11KV/22KV/ 433V Transformer in the suitable core assembly including charges for removing the burnt coil and allining of core assembly and including required insulating materials etc complete after deducting the cost burned scrap.
3015Charges for improving of IR Value of Transformer using electric oven - Heat Champer (LT winding, HT winding and Transformer core) etc., complete as directed by TWAD Board officers.
3016Charges for two coats of painting the Transformer as directed by TWAD Board officers.
3017Charges for two coats of painting the 6 Pole Structure and yard fencing etc,. complete as directed by TWAD Board officers.
3018Charges for Eart Pit Value Checking with Certificate
3019Charges for 11KV/433V Transformer loading to vehicle with mobile grane and conveying to Pumphouse Unloading the above transformer with mobile crane Re-erection of transformer with cable termination earthing and neutral connection testing of No Load and Load testing at pumphouse as per site condition and existing arrangements and as directed by TWAD Board Officers.
3020Charges for transformer oil filtration using hot air vacuum filtering unit up to the required BDV value and submitting test result of both BDV and Acidity etc .complete and as directed by TWAD board officers.
3021Supply and delivery of required size of LT Brass rod with terminal bushing with 4 no of nuts, washers and insulating sleeves etc., complete
3022Supply and delivery of required capacity copper,connecting plate for cable termination .
3023Supply and delivery of required size copper HT terminal rod with Bushing and required Bolt & Nuts with washers
3024Supply and Delivery of Cork Packing Sheet, Cork Bush for LT and HT side, oil level Indicator as directed by TWAD Board officers after deducting the cost of old scraps
3025Supply and delivery of new LT/HT Coil made EC Grade DP coveriong copper wire for winding of 11KV/22KV/433V Transformer and required insulating materials etc., complete
3026Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
3027Supply and delivery of Drop Out fuse fixing unit set
3028Supply, delivery and fixing of Drop Out fuse Top Contact and bottom Contact
3029Supply and delivery of Breather with Silica gel of required size for the Transfomer
3030Supply and delivery of Silica gel
3031Supply and delivery of 11 KV / 22 KV Lightning Arrestor
3032Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
3033Repairing and reconditioning of 30 HP HSC Motor including all material, labour etc.,
3034Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
3035Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
3036Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
3037Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
3038Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
3039Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
3040Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3041Transportation charges for conveying the motor from work shop to Pumping Station
3042Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
3043Repairing and reconditioning of 30 HP HSC Pump including all material, labour etc.,
3044Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
3045Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
3046Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
3047Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
3048Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
3049Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
3050Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
3051Supply and delivery of Driven End and Non Driven End bearings
3052Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3053Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
3054Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
3055Repairing and reconditioning of 40 HP HSC Motor including all material, labour etc.,
3056Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
3057Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
3058Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
3059Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
3060Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
3061Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
3062Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3063Transportation charges for conveying the motor from work shop to Pumping Station
3064Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
3065Repairing and reconditioning of 40 HP HSC Pump including all material, labour etc., at Variyankaval Hospital sump
3066Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
3067Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
3068Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
3069Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
3070Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
3071Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
3072Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
3073Supply and delivery of Driven End and Non Driven End bearings
3074Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3075Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
3076Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
3077Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour etc.,
3078Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3079Transporting the pumpset from Pump House to work shop.
3080Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3081Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3082Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3083Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3084Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3085Repairing and reconditioning of 15 HP Monoblock Pumpset including all material, labour, etc.,
3086Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3087Transporting the pumpset from the Pumping Station to work shop.
3088Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3089Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3090Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3091Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3092Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3093Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3094Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3095Repairing and reconditioning of 3HP Submersible Pumpset including all material, labour etc.,
3096Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3097Transporting the pumpset from Pump House to work shop.
3098Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3099Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3100Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3101Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3102Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3103Repairing and reconditioning of 20 HP Submersible Pumpset including all material, labour etc.,
3104Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3105Transporting the pumpset from Pump House to work shop.
3106Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3107Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3108Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3109Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3110Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3111Repairing and reconditioning of 5HP Centrifugal Pumpset including all material, labour etc.,
3112Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3113Transporting the pumpset from the Pumping Station to work shop.
3114Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3115Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3116Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3117Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3118Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3119Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3120Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3121Repairing and reconditioning of 5HP Submersible Pumpset including all material, labour, etc at Edaiyakuruchi
3122Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3123Transporting the pumpset from Pump House to work shop.
3124Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3125Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3126Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3127Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3128Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3129Repairing and reconditioning of 7.50 HP Centrifugal Pumpset including all material, labour etc.,
3130Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3131Transporting the pumpset from the Pumping Station to work shop.
3132Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3133Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3134Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3135Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3136Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3137Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3138Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3139Repairing and reconditioning of 2HP Monoblock Pumpset including all material, labour etc.,
3140Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3141Transporting the pumpset from the Pumping Station to work shop.
3142Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3143Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3144Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3145Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3146Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3147Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3148Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3149Repairing and reconditioning of 2HP Submersible Pumpset including all material, labour etc.,
3150Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3151Transporting the pumpset from Pump House to work shop.
3152Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3153Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3154Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3155Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3156Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3157Repairing and reconditioning of 1HP Monoblock Pumpset including all material, labour etc.,
3158Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3159Transporting the pumpset from the Pumping Station to work shop.
3160Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3161Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3162Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3163Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3164Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3165Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3166Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3167Repairing and reconditioning of 3 HP Monoblock Pumpset including all material, labour etc.,
3168Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3169Transporting the pumpset from the Pumping Station to work shop.
3170Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3171Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3172Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3173Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3174Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3175Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3176Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3177Attending repair works in Soft starter 145 HP
3178Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
3179Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
3180Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
3181Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
3182Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3183Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
3184Supply and Delivery of PLA Safety Relay suitable for the starter
3185Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3186Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3187Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
3188Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
3189Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3190Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3191Attending repair works in Soft starter 190 HP
3192Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
3193Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
3194Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
3195Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
3196Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3197Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
3198Supply and Delivery of PLA Safety Relay suitable for the starter
3199Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3200Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3201Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
3202Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
3203Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3204Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3205Attending repair works in ATS starter 40 HP
3206Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
3207Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
3208Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
3209Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
3210Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3211Supply and Delivery of PLA Safety Relay suitable for the starter
3212Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3213Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3214Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3215Attending repair works in ATS starter 30 HP
3216Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
3217Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
3218Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
3219Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
3220Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3221Supply and Delivery of PLA Safety Relay suitable for the starter
3222Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3223Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3224Attending repair works in Star Delta starter 20 HP
3225Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
3226Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3227Supply and Delivery of PLA Safety Relay suitable for the starter
3228Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3229Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
3230Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3231Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
3232Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3233Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
3234Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3235Attending repair works in Star Delta starter 12.5 HP
3236Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
3237Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3238Supply and Delivery of PLA Safety Relay suitable for the starter
3239Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3240Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
3241Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3242Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
3243Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3244Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
3245Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3246Attending repair works in Star Delta starter 7.5 HP
3247Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
3248Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3249Supply and Delivery of PLA Safety Relay suitable for the starter
3250Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3251Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
3252Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3253Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
3254Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3255Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
3256Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3257Attending repair works in DOL starter 5 HP
3258Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
3259Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3260Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3261Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
3262Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3263Attending repair works in DOL starter 3 HP
3264Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
3265Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3266Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3267Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
3268Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3269Attending repair works in DOL starter 2 HP
3270Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
3271Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3272Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3273Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
3274Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3275Attending repair works in DOL starter 1 HP
3276Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
3277Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3278Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3279Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
3280Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3281Supply and delivery of PVC Insulated 3
3282Supply and delivery of the following Electrical works:consumable items
3283Volt meter SR 96 600 V-AC
3284Ammeter SR 96 5D/5A C.T.operated-AC
3285LED Outdoor fittings a)30 W LED street light fittings
3286Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
3287Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers.
328850mm GI Pipe
328965mm GI Pipe
329080mm GI Pipe
3291100mm GI Pipe
3292Charges for Repair and Reconditioning of the Sluice Valves and Air Valves fixed in the Pumping Main, Feeder Main and Branch Main including cost of all materials and labour charges etc., complete
3293300mm Sluice Valve
3294250mm Sluice Valve
3295200mm Sluice Valve
3296150mm Sluice Valve
3297100mm Sluice Valve
329880mm Sluice Valve
3299Replacement of non functioning unserviceble Gun Metal Gate valve without affecting existing alignment by using contractor tools excluding the cost of valve but including required length of GI nipple, coupling etc., complete
330080mm GM Valve
330165mm GM Valve
330250mm GM Valve
3303Repair and Reconditioning of the Double Air Valve / Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
3304100mm Air Valve
330580mm Air Valve
330650mm Air Valve
330725mm Air Valve
3308Sump Cleaning
3309Charges for cleaning the sumps of TWAD Board by clearing the sludge and disposing it to near by boundary of the sump site including baling out the sludge water by using diesel pumpset of required capacity and removing the algae and scaling by scrapping, flushing the sump finally with bleaching powder and spreading bleaching powder around the sump , etc., complete and as directed by the departmental officers
33101.00 LL capacity of sump @ Thoothur
33118.00 LL capacity of sump @ T,Palur Booster
33120.20 LL capacity of sump @ Angarayanallur
33138.00 LL capacity of sump @ Jayankondam Booster
33140.20 LL capacity of sump @ Elaiyur Mariamman koil
33150.20 LL capacity of sump @ Elaiyur Colony
33160.20 LL capacity of sump @ Variyankaval East
33171.00 LL capacity of sump @ Variyankaval GH
33181.50 LL capacity of sump @ Devanur
33191.00 LL capacity of sump @ Kuvagam
33202.00 LL capacity of sump @ Edayakurichi
33212.00 LL capacity of sump @ Agneespuram
33222.00 LL capacity of sump @ Koovathur
33231.00 LL capacity of sump @ Ayyur
33242.00 LL capacity of sump @ Kumilakuzhi
33251.00 LL capacity of sump @ Silambur
33261.00 LL capacity of sump @ Pukkuzhi
33270.60LL capacity of sump @ Alagapuram OHT
33282.00 LL capacity of sump @ Alagapuram Naidu Street
33290.60 LL capacity of sump @ Alagapuram Colony
33301.00 LL capacity of sump @ Agaram
33311.00 LL capacity of sump @ Kavarapalayam
33320.30 LL capacity of sump @ Manakollai
3333Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
3334For the Year 2028-2029(From 01.04.2028 to 31.03.2029)
3335Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
3336Leak and Burst works
3337Attending Collar Leaks in the AC pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
3338150mm AC pipe
3339200mm AC pipe
3340250mm AC pipe
3341350mm PSC pipe
3342400mm PSC pipe
3343450mm PSC pipe
3344600mm PSC pipe
3345Attending Minor Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
334650mm 6 ksc PVC Pipes
334763mm 4 ksc PVC Pipes
334875mm 4 ksc PVC Pipes
334990mm 4 ksc PVC Pipes
3350110mm 4 ksc PVC Pipes
3351140mm 4 ksc PVC Pipes
3352160mm 4 ksc PVC Pipes
3353150mm AC pipe
3354200mm AC pipe
3355250mm AC pipe
3356350mm PSC pipe
3357400mm PSC pipe
3358450mm PSC pipe
3359600mm PSC pipe
336063mm HDPE PN6
336175mm HDPE PN6
336290mm HDPE PN6
3363110mm HDPE PN6
3364140mm HDPE PN6
3365160mm HDPE PN6
3366200mm HDPE PN6
3367250mm HDPE PN6
3368Attending Major Burst in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
336950mm 6 ksc PVC Pipes
337063mm 4 ksc PVC Pipes
337175mm 4 ksc PVC Pipes
337290mm 4 ksc PVC Pipes
3373110mm 4 ksc PVC Pipes
3374140mm 4 ksc PVC Pipes
3375160mm 4 ksc PVC Pipes
3376150mm AC pipe
3377200mm AC pipe
3378250mm AC pipe
3379350mm PSC pipe
3380400mm PSC pipe
3381450mm PSC pipe
3382600mm PSC pipe
338363mm HDPE PN6
338475mm HDPE PN6
338590mm HDPE PN6
3386110mm HDPE PN6
3387140mm HDPE PN6
3388160mm HDPE PN6
3389200mm HDPE PN6
3390250mm HDPE PN6
3391Attending Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II.(The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
3392MS Pipe Leak Below GL
3393300mm MS Pipe
3394350mm MS Pipe
3395400 mm MS pipe
3396450 mm MS pipe
3397600 mm MS pipe
3398MS Pipe Leak Above GL
3399300mm MS Pipe
3400350mm MS Pipe
3401400 mm MS pipe
3402450 mm MS pipe
3403600 mm MS pipe
3404Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
3405Repairing and reconditioning of 125 HP VT Motor with replacement of motor including all material, labour etc.,
3406Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
3407Transportation charges for conveying the motor from the Station to Our work shop including loading and unloading charges.
3408Labour Charges for removing the two end side cover with fan arrangements and Dismantling the damaged NDE Side ball Bearing from the motor after removing the Rachet assembly load bearing safely and Fixing the New ball Bearing in the appropriate place with required lubricants without any damage to the motor shaft and winding after deducting the old damaged materials.
3409Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
3410Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
3411Supply and delivery of Non Driven End Deep Grove ball Bearing SKF Make suitable for the Squirrel Gage Induction Motor.
3412Labour Charges fixing the NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3413Transportation charges for conveying the motor from work shop to pumping Station
3414Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
3415Repairing and reconditioning of 125 HP VT Pump labour charges,etc
3416Charges for Removing the Hollow shaft Squirrel cage Induction Motor after disconnecting the Power supply Cable, Discharge Head, Head Shaft and Stuffing Box by using contractor tools at Collector Well / Collection Sump
3417Charges for removing the all Column pipes of VT Pumpset each 1.5 m / 2.00 m to length and bowl assemblly for attending Pump repair works
3418Transportation charges for conveying the VT Pump bowl assembly from Collector Well Pump room to Work Shop including usage of trolley along the Foot bridge and Van
3419Reconditioning of Stuffing Box for providing bronze bush suitable for fixing thr Rope Gland and Head Shaft to avoid frequent damaging of rope and to avoid spreading of more leakage water from the Rope Gland including lath works etc., complete.
3420Charges for Lathe work of reconditioning of Pump SS Shaft with balancing, SS Bushes and sleeves, charges for Spider bore nd outer dimension phase out lath works, reconditioning of impeller and impeller ring & charges fixing the bearing and bronze bushes in the bowl assembly including correct setting of impeller allignment etc complete
3421Transportation charges for conveying the VT Pump bowl assembly from our work shop to Collector Well Pump room including usage of trolley along the Foot bridge and Van
3422Charges for reassembling the all Column pipes of Turbine Pump set and bowl assemblly after attending Pump repair works in the proper allignment after attending the cleaning and painting work in the coloumn pipe and body of the bowl assembly
3423Re errection of reconditioned stuffing box, new Head shaft, Discharge head and Motor, fixing the Rachet load bearing assembly including filling of required 90 grade oil and Connecting the 440V AC incoming Cable to the Motor Terminal and fixing new rope in the rope gland and Checking Motor Pumpset Alignment and Rotation and testing with load etc.,Complete
3424Repair works of 125 HP VT Pump (Supply of Materials)
3425Supply and Delivery of SS 410 New Pump Head Shaft for required mm and required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
3426Supply and Delivery of SS 410 New Pump Line Shaft for required mm and required length. (including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete)
3427Supply and delivery of stuffing box brone bush suitable for the Discharge Head assembly
3428Supply and Delivery of Required TVS Bolt , Nut and Washer for Bowl Assembly and all Column Pipe for inplace of Wornout Bolt and Nuts after deducting the cost of scrap materials and as Directed by TWAD Board Officers.
3429Supply and Delivery of Line shaft SS Coupling with Bush (including Raw Materials, Machining , Polishing etc., Complete)
3430Supply and Delivery of SS Sleeves Suitable for the Line Shaft for Inplace of Wornout SS Sleeves after deducting the cost of scrap materials as Directed by TWAD Board Officers.
3431Supply and Delivery of Spider Rubber Bush made in Hard Rubber and Finishing to Suit in Between the Casting Spider and Line shaft inplace of wornout Rubber Bush after deducting the cost of scrap materials as directed by TWAD Board Officers.
3432Supply and Delivery of Bronze Bush Bearing Suitable for Bowl Assembly and Pump Shaft inplace of wornout bronze Bush Bearing after deducting the cost of scrap materials as directed by TWAD Board Officers.
3433Supply and Delivery of 1.Bronze Bush Bearing Suitable for the Bowl Assembly (Top Side) 2. Bronze Bush Bearing Suitable for the Bell Mouth (Bottom) for inplace of wornout Bronze Bush Bearings after deducting the cost of scrap materials as Directed by TWAD Board Officers.
3434Supply and delivery of MS Seamless required size of Coloumn pipe suitable for the VT Pumpset
3435Supply and delivery of spider suitable for the coloumn pipe including cost of Raw Materials, welding, polishing etc., complete as directed by TWAD officers
3436Supply and delivery of new intermedia ring (Prosperous bronze metal) between bowl assembly and as directed by TWAD officers
3437Supply and delivery of new bowl shaft for required size for required length.(including Charge for Lathe Works, Grinding, Polishing, Threading, Key Way and other works etc.,Complete) and as directed by TWAD officers
3438Supply and delivery of Top Load Bearing with Ratchet assembly including Required Grade lubricating components
3439Repairing and reconditioning of 7.5 HP Openwell submersible Pumpset including all material, labour etc.,
3440Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3441Transporting the pumpset from Pump House to work shop.
3442Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3443Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3444Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3445Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3446Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3447Repairing and reconditioning of 167.50 HP HSC Motor including all material,labour,etc
3448Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
3449Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
3450Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
3451Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
3452Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
3453Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
3454Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3455Transportation charges for conveying the motor from work shop to Pumping Station
3456Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
3457Repairing and reconditioning of 167.50 HP HSC Pump including all material,labour,etc
3458Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
3459Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
3460Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
3461Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
3462Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
3463Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
3464Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
3465Supply and delivery of Driven End and Non Driven End bearings
3466Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3467Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
3468Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
3469Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
3470Attending the repair works in 11 KV/ 433 V Transformer - 315KVA at T.Palur Booster
3471Charges for removing the Transformer from the plinth after disconnecting the incomming & outgoing supply terminations, earthing, neutral connection in the Transformer loading to vehicle with mobile grane and conveying to workshop unloading the transformer with mobile crane as per site condition and as directed by TWAD Board Officers.
3472Charges for disconnecting the incomming & outgoing (LT & HT Side) supply terminations, earthing, neutral connection in the Transformer and drain out the oil from the conservator Tank and Transformer tank up to the required level and stacking the containers to attend the repair works/ Oil leakages and as directed by TWAD Board Officers.
3473Charges Opening the Transformer Top cover after disconnecting the inside terminal connections, weakening / damaged bushes, brash stud bolt & Nuts and lifting Transformer core & winding without damages etc., complete.
3474Charges for cleaning the winding coils of the Transformer free from moisture and cleaning the inside walls of the Transformer by using required new Transformer oil without any damage to the Transformer Coil
3475Charges for fixing the required capacity brass LT terminal bush 3nos, copper connecting plate,3 nos using necessary bushes, screws bolt nuts etc., complete
3476Charges for re-fixing the Transformer Top cover with conservator tank on the Transformer and connecting with all inside terminal connections including HT terminals by using required bolt & nuts and filling the tapped oil upto the mark of level indicator and charging the transformers, testing with load etc., complete
3477Charges for rewinding of Three phase of 11KV/22KV/ 433V Transformer in the suitable core assembly including charges for removing the burnt coil and allining of core assembly and including required insulating materials etc complete after deducting the cost burned scrap.
3478Charges for improving of IR Value of Transformer using electric oven - Heat Champer (LT winding, HT winding and Transformer core) etc., complete as directed by TWAD Board officers.
3479Charges for two coats of painting the Transformer as directed by TWAD Board officers.
3480Charges for two coats of painting the 6 Pole Structure and yard fencing etc,. complete as directed by TWAD Board officers.
3481Charges for Eart Pit Value Checking with Certificate
3482Charges for 11KV/433V Transformer loading to vehicle with mobile grane and conveying to Pumphouse Unloading the above transformer with mobile crane Re-erection of transformer with cable termination earthing and neutral connection testing of No Load and Load testing at pumphouse as per site condition and existing arrangements and as directed by TWAD Board Officers.
3483Charges for transformer oil filtration using hot air vacuum filtering unit up to the required BDV value and submitting test result of both BDV and Acidity etc .complete and as directed by TWAD board officers.
3484Supply and delivery of required size of LT Brass rod with terminal bushing with 4 no of nuts, washers and insulating sleeves etc., complete
3485Supply and delivery of required capacity copper,connecting plate for cable termination .
3486Supply and delivery of required size copper HT terminal rod with Bushing and required Bolt & Nuts with washers
3487Supply and Delivery of Cork Packing Sheet, Cork Bush for LT and HT side, oil level Indicator as directed by TWAD Board officers after deducting the cost of old scraps
3488Supply and delivery of new LT/HT Coil made EC Grade DP coveriong copper wire for winding of 11KV/22KV/433V Transformer and required insulating materials etc., complete
3489Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
3490Supply and delivery of Drop Out fuse fixing unit set
3491Supply, delivery and fixing of Drop Out fuse Top Contact and bottom Contact
3492Supply and delivery of Breather with Silica gel of required size for the Transfomer
3493Supply and delivery of Silica gel
3494Supply and delivery of 11 KV / 22 KV Lightning Arrestor
3495Repairing and reconditioning of 125 HP HSC Motor including all material,labour,etc
3496Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
3497Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
3498Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
3499Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
3500Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
3501Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
3502Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3503Transportation charges for conveying the motor from work shop to Pumping Station
3504Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
3505Repairing and reconditioning of 125 HP HSC Pump including all material, labour etc.,
3506Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
3507Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
3508Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
3509Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
3510Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
3511Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
3512Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
3513Supply and delivery of Driven End and Non Driven End bearings
3514Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3515Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
3516Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
3517Attending the repair works in 11 KV/ 433 V Transformer - 200KVA at Jayankondam Booster
3518Charges for removing the Transformer from the plinth after disconnecting the incomming & outgoing supply terminations, earthing, neutral connection in the Transformer loading to vehicle with mobile grane and conveying to workshop unloading the transformer with mobile crane as per site condition and as directed by TWAD Board Officers.
3519Charges for disconnecting the incomming & outgoing (LT & HT Side) supply terminations, earthing, neutral connection in the Transformer and drain out the oil from the conservator Tank and Transformer tank up to the required level and stacking the containers to attend the repair works/ Oil leakages and as directed by TWAD Board Officers.
3520Charges Opening the Transformer Top cover after disconnecting the inside terminal connections, weakening / damaged bushes, brash stud bolt & Nuts and lifting Transformer core & winding without damages etc., complete.
3521Charges for cleaning the winding coils of the Transformer free from moisture and cleaning the inside walls of the Transformer by using required new Transformer oil without any damage to the Transformer Coil
3522Charges for fixing the required capacity brass LT terminal bush 3nos, copper connecting plate,3 nos using necessary bushes, screws bolt nuts etc., complete
3523Charges for re-fixing the Transformer Top cover with conservator tank on the Transformer and connecting with all inside terminal connections including HT terminals by using required bolt & nuts and filling the tapped oil upto the mark of level indicator and charging the transformers, testing with load etc., complete
3524Charges for rewinding of Three phase of 11KV/22KV/ 433V Transformer in the suitable core assembly including charges for removing the burnt coil and allining of core assembly and including required insulating materials etc complete after deducting the cost burned scrap.
3525Charges for improving of IR Value of Transformer using electric oven - Heat Champer (LT winding, HT winding and Transformer core) etc., complete as directed by TWAD Board officers.
3526Charges for two coats of painting the Transformer as directed by TWAD Board officers.
3527Charges for two coats of painting the 6 Pole Structure and yard fencing etc,. complete as directed by TWAD Board officers.
3528Charges for Eart Pit Value Checking with Certificate
3529Charges for 11KV/433V Transformer loading to vehicle with mobile grane and conveying to Pumphouse Unloading the above transformer with mobile crane Re-erection of transformer with cable termination earthing and neutral connection testing of No Load and Load testing at pumphouse as per site condition and existing arrangements and as directed by TWAD Board Officers.
3530Charges for transformer oil filtration using hot air vacuum filtering unit up to the required BDV value and submitting test result of both BDV and Acidity etc .complete and as directed by TWAD board officers.
3531Supply and delivery of required size of LT Brass rod with terminal bushing with 4 no of nuts, washers and insulating sleeves etc., complete
3532Supply and delivery of required capacity copper,connecting plate for cable termination .
3533Supply and delivery of required size copper HT terminal rod with Bushing and required Bolt & Nuts with washers
3534Supply and Delivery of Cork Packing Sheet, Cork Bush for LT and HT side, oil level Indicator as directed by TWAD Board officers after deducting the cost of old scraps
3535Supply and delivery of new LT/HT Coil made EC Grade DP coveriong copper wire for winding of 11KV/22KV/433V Transformer and required insulating materials etc., complete
3536Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
3537Supply and delivery of Drop Out fuse fixing unit set
3538Supply, delivery and fixing of Drop Out fuse Top Contact and bottom Contact
3539Supply and delivery of Breather with Silica gel of required size for the Transfomer
3540Supply and delivery of Silica gel
3541Supply and delivery of 11 KV / 22 KV Lightning Arrestor
3542Supply of transformer oil grade “A” for using cooling purpose of transformer winding AS per IS 335/1983, HT 11KV/ 22KV/ 415 V transformer (including transport , loading an unloading etc complete) Directed by TWAD board officers.
3543Repairing and reconditioning of 30 HP HSC Motor including all material, labour etc.,
3544Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
3545Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
3546Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
3547Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
3548Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
3549Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
3550Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3551Transportation charges for conveying the motor from work shop to Pumping Station
3552Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
3553Repairing and reconditioning of 30 HP HSC Pump including all material, labour etc.,
3554Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
3555Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
3556Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
3557Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
3558Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
3559Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
3560Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
3561Supply and delivery of Driven End and Non Driven End bearings
3562Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3563Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
3564Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
3565Repairing and reconditioning of 40 HP HSC Motor including all material, labour etc.,
3566Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
3567Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
3568Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
3569Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
3570Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
3571Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
3572Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3573Transportation charges for conveying the motor from work shop to Pumping Station
3574Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
3575Repairing and reconditioning of 40 HP HSC Pump including all material, labour etc., at Variyankaval Hospital sump
3576Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
3577Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
3578Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
3579Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
3580Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
3581Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
3582Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
3583Supply and delivery of Driven End and Non Driven End bearings
3584Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3585Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
3586Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
3587Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour etc.,
3588Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3589Transporting the pumpset from Pump House to work shop.
3590Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3591Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3592Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3593Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3594Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3595Repairing and reconditioning of 15 HP Monoblock Pumpset including all material, labour, etc.,
3596Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3597Transporting the pumpset from the Pumping Station to work shop.
3598Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3599Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3600Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3601Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3602Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3603Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3604Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3605Repairing and reconditioning of 3HP Submersible Pumpset including all material, labour etc.,
3606Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3607Transporting the pumpset from Pump House to work shop.
3608Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3609Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3610Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3611Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3612Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3613Repairing and reconditioning of 20 HP Submersible Pumpset including all material, labour etc.,
3614Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3615Transporting the pumpset from Pump House to work shop.
3616Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3617Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3618Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3619Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3620Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3621Repairing and reconditioning of 5HP Centrifugal Pumpset including all material, labour etc.,
3622Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3623Transporting the pumpset from the Pumping Station to work shop.
3624Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3625Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3626Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3627Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3628Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3629Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3630Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3631Repairing and reconditioning of 5HP Submersible Pumpset including all material, labour, etc at Edaiyakuruchi
3632Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3633Transporting the pumpset from Pump House to work shop.
3634Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3635Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3636Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3637Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3638Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3639Repairing and reconditioning of 7.50 HP Centrifugal Pumpset including all material, labour etc.,
3640Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3641Transporting the pumpset from the Pumping Station to work shop.
3642Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3643Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3644Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3645Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3646Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3647Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3648Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3649Repairing and reconditioning of 2HP Monoblock Pumpset including all material, labour etc.,
3650Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3651Transporting the pumpset from the Pumping Station to work shop.
3652Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3653Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3654Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3655Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3656Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3657Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3658Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3659Repairing and reconditioning of 2HP Submersible Pumpset including all material, labour etc.,
3660Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3661Transporting the pumpset from Pump House to work shop.
3662Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3663Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3664Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3665Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3666Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3667Repairing and reconditioning of 1HP Monoblock Pumpset including all material, labour etc.,
3668Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3669Transporting the pumpset from the Pumping Station to work shop.
3670Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3671Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3672Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3673Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3674Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3675Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3676Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3677Repairing and reconditioning of 3 HP Monoblock Pumpset including all material, labour etc.,
3678Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3679Transporting the pumpset from the Pumping Station to work shop.
3680Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3681Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3682Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3683Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3684Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3685Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3686Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3687Attending repair works in Soft starter 145 HP
3688Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
3689Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
3690Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
3691Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
3692Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3693Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
3694Supply and Delivery of PLA Safety Relay suitable for the starter
3695Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3696Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3697Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
3698Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
3699Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3700Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3701Attending repair works in Soft starter 190 HP
3702Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
3703Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
3704Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
3705Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
3706Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3707Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
3708Supply and Delivery of PLA Safety Relay suitable for the starter
3709Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3710Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3711Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
3712Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
3713Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3714Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3715Attending repair works in ATS starter 40 HP
3716Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
3717Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
3718Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
3719Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
3720Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3721Supply and Delivery of PLA Safety Relay suitable for the starter
3722Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3723Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3724Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3725Attending repair works in ATS starter 30 HP
3726Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
3727Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
3728Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
3729Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
3730Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3731Supply and Delivery of PLA Safety Relay suitable for the starter
3732Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3733Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3734Attending repair works in Star Delta starter 20 HP
3735Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
3736Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3737Supply and Delivery of PLA Safety Relay suitable for the starter
3738Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3739Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
3740Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3741Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
3742Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3743Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
3744Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3745Attending repair works in Star Delta starter 12.5 HP
3746Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
3747Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3748Supply and Delivery of PLA Safety Relay suitable for the starter
3749Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3750Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
3751Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3752Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
3753Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3754Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
3755Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3756Attending repair works in Star Delta starter 7.5 HP
3757Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, CT Coil and PLA safety Relay suitable for the starter
3758Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3759Supply and Delivery of PLA Safety Relay suitable for the starter
3760Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
3761Supply and Delivery and fixing of required capacity Over load relay suitable for the starter as directed by TWAD Board officers.
3762Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3763Replacement of Front Mounting unit including the cost of material (NO and NC Element) suitable for the starter as directed by TWAD Board Officers.
3764Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
3765Replacement of of required amps Terminal block Suitable for the starter as directed by TWAD Board Officers.
3766Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3767Attending repair works in DOL starter 5 HP
3768Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
3769Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3770Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3771Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
3772Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3773Attending repair works in DOL starter 3 HP
3774Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
3775Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3776Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3777Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
3778Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3779Attending repair works in DOL starter 2 HP
3780Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
3781Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3782Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3783Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
3784Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3785Attending repair works in DOL starter 1 HP
3786Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
3787Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
3788Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
3789Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
3790Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
3791Supply and delivery of PVC Insulated 3 core flat type copper cable - 6 sq.mm
3792Supply and delivery of the following Electrical works:consumable items
3793Volt meter SR 96 600 V-AC
3794Ammeter SR 96 5D/5A C.T.operated-AC
3795LED Outdoor fittings a)30 W LED street light fittings
3796Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS:2834 with ISI marking
3797Supply and delivery of GI pipes (Medium) as per IS 1239/PART I/2004complete and as directed by the TWAD board officers.
379850mm GI Pipe
379965mm GI Pipe
380080mm GI Pipe
3801100mm GI Pipe
3802Charges for Repair and Reconditioning of the Sluice Valves and Air Valves fixed in the Pumping Main, Feeder Main and Branch Main including cost of all materials and labour charges etc., complete
3803300mm Sluice Valve
3804250mm Sluice Valve
3805200mm Sluice Valve
3806150mm Sluice Valve
3807100mm Sluice Valve
380880mm Sluice Valve
3809Replacement of non functioning unserviceble Gun Metal Gate valve without affecting existing alignment by using contractor tools excluding the cost of valve but including required length of GI nipple, coupling etc., complete
381080mm GM Valve
381165mm GM Valve
381250mm GM Valve
3813Repair and Reconditioning of the Double Air Valve / Single Chamber Air Release Valve including the Cost of Air Valve Ball, Rubber Washer and required Bolt & Nuts, etc., complete
3814100mm Air Valve
381580mm Air Valve
381650mm Air Valve
381725mm Air Valve
3818Sump Cleaning
3819Charges for cleaning the sumps of TWAD Board by clearing the sludge and disposing it to near by boundary of the sump site including baling out the sludge water by using diesel pumpset of required capacity and removing the algae and scaling by scrapping, flushing the sump finally with bleaching powder and spreading bleaching powder around the sump , etc., complete and as directed by the departmental officers
38201.00 LL capacity of sump @ Thoothur
38218.00 LL capacity of sump @ T,Palur Booster
38220.20 LL capacity of sump @ Angarayanallur
38238.00 LL capacity of sump @ Jayankondam Booster
38240.20 LL capacity of sump @ Elaiyur Mariamman koil
38250.20 LL capacity of sump @ Elaiyur Colony
38260.20 LL capacity of sump @ Variyankaval East
38271.00 LL capacity of sump @ Variyankaval GH
38281.50 LL capacity of sump @ Devanur
38291.00 LL capacity of sump @ Kuvagam
38302.00 LL capacity of sump @ Edayakurichi
38312.00 LL capacity of sump @ Agneespuram
38322.00 LL capacity of sump @ Koovathur
38331.00 LL capacity of sump @ Ayyur
38342.00 LL capacity of sump @ Kumilakuzhi
38351.00 LL capacity of sump @ Silambur
38361.00 LL capacity of sump @ Pukkuzhi
38370.60LL capacity of sump @ Alagapuram OHT
38382.00 LL capacity of sump @ Alagapuram Naidu Street
38390.60 LL capacity of sump @ Alagapuram Colony
38401.00 LL capacity of sump @ Agaram
38411.00 LL capacity of sump @ Kavarapalayam
38420.30 LL capacity of sump @ Manakollai
3843Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
3844Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
3845For the Year 2026-2027 (From 01.01.2027 to 31.03.2027)
3846Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
3847Leak and Burst
3848Attending Minor/ Major Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II. (The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
3849PVC / HDPE Pipes - Minor/ Circumferential Leak
385063mm 4 ksc PVC Pipes
385175mm 4 ksc PVC Pipes
385290mm 4 ksc PVC Pipes
3853110mm 4 ksc PVC Pipes
3854140mm 4 ksc PVC Pipes
385550mm 6 ksc PVC Pipes
385663mm 6 ksc PVC Pipes
385775mm 6 ksc PVC Pipes
385890mm 6 ksc PVC Pipes
3859110mm 6 ksc PVC Pipes
3860140mm 6 ksc PVC Pipes
3861160mm 6 ksc PVC Pipes
3862160mm HDPE PN6 Pipes
3863250mm HDPE PN6 Pipes
3864280mm HDPE PN6 Pipes
3865315mm HDPE PN6 Pipes
3866355mm HDPE PN6 Pipes
3867160mm HDPE PN8 Pipes
3868355mm HDPE PN8 Pipes
3869PVC / HDPE Pipes - Major Burst
387063mm 4 ksc PVC Pipes
387175mm 4 ksc PVC Pipes
387290mm 4 ksc PVC Pipes
3873110mm 4 ksc PVC Pipes
3874140mm 4 ksc PVC Pipes
387550mm 6 ksc PVC Pipes
387663mm 6 ksc PVC Pipes
387775mm 6 ksc PVC Pipes
387890mm 6 ksc PVC Pipes
3879110mm 6 ksc PVC Pipes
3880140mm 6 ksc PVC Pipes
3881160mm 6 ksc PVC Pipes
3882160mm HDPE PN6 Pipes
3883250mm HDPE PN6 Pipes
3884280mm HDPE PN6 Pipes
3885315mm HDPE PN6 Pipes
3886355mm HDPE PN6 Pipes
3887160mm HDPE PN8 Pipes
3888355mm HDPE PN8 Pipes
3889GI Pipes - Above GL
3890125 mm GI pipe
3891100 mm GI pipe
389280 mm GI pipe
389365mm GI pipe
389450 mm GI pipe
3895MS Pipes - Above GL
3896300mm MS
3897350mm MS
3898DI - Minor/ Circumferential Leak
3899200mm DI
3900250mm DI
3901Supply and delivery of GM gate vaves as per IS BS5154 and related IS specification complete and as directed by the TWAD board officers
390250 mm GM Gate valve
390365 mm GM Gate valve
390480 mm GM Gate valve
390550 mm GM NRV valve
390665 mm GM NRV valve
390780 mm GM NRV valve
3908Repairing and reconditioning of Air Valve in pumping , booster and branch main
390950mm DI Single Chamber Air release Valve
391080mm DI Single Chamber Air release Valve
391150mm CI Double Air Valve
391240mm CI Double Air Valve
391325mm CI Single Air Valve
3914Supply and delivery of DI non return valve IS specification complete and as directed by the TWAD board officers.
391550mm DI Non-Return Valve
391665mm DI Non-Return Valve
391780mm DI Non-Return Valve
3918100mm DI Non-Return Valve
3919250mm DI Non-Return Valve
3920Supply and Delivery of MJ Collars 200mm
3921REPAIR AND RENEWALS
3922Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
3923Repairing and reconditioning of 100 HP HSC Motor including all material, labour, etc
3924Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
3925Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
3926Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
3927Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
3928Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
3929Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
3930Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3931Transportation charges for conveying the motor from work shop to Pumping Station
3932Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
3933Repairing and reconditioning of 100 HP HSC Pump including all material, labour, etc
3934Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
3935Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
3936Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
3937Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
3938Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
3939Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
3940Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
3941Supply and delivery of Driven End and Non Driven End bearings
3942Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
3943Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
3944Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
3945Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour, etc at Infiltration wells Head works
3946Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3947Transporting the pumpset from Pump House to work shop.
3948Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3949Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3950Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3951Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3952Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3953Repairing and reconditioning of 20 HP Submersible Pumpset including all material, labour, etc
3954Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3955Transporting the pumpset from Pump House to work shop.
3956Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3957Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3958Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3959Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3960Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3961Repairing and reconditioning of 4 HP and 3HP Submersible Pumpset including all material, labour, etc
3962Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3963Transporting the pumpset from Pump House to work shop.
3964Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3965Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3966Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3967Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3968Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3969Repairing and reconditioning of 1 HP Submersible Pumpset including all material, labour, etc
3970Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3971Transporting the pumpset from Pump House to work shop.
3972Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3973Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3974Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3975Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3976Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3977Repairing and reconditioning of 2 HP Submersible Pumpset including all material, labour, etc
3978Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
3979Transporting the pumpset from Pump House to work shop.
3980Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3981Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
3982Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
3983Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
3984Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
3985Repairing and reconditioning of 1HP Centrifugal Monoblock Pumpset including all material, labour, etc at Keelaveli to Pattiyadi
3986Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3987Transporting the pumpset from the Pumping Station to work shop.
3988Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3989Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
3990Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
3991Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
3992Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
3993Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
3994Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
3995Repairing and reconditioning of 3 HP Centrifugal Monoblock Pumpset including all material,labour,etc
3996Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
3997Transporting the pumpset from the Pumping Station to work shop.
3998Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
3999Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
4000Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4001Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
4002Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
4003Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
4004Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
4005Repairing and reconditioning of 2 HP Centrifugal Pumpset including all material,labour,etc at Kallathur SP to kallathur
4006Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
4007Transporting the pumpset from the Pumping Station to work shop.
4008Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
4009Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
4010Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4011Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
4012Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
4013Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
4014Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
4015Attending the repair works in Soft Starter 100HP
4016Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
4017Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
4018Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
4019Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
4020Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4021Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
4022Supply and Delivery of PLA Safety Relay suitable for the starter
4023Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
4024Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4025Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
4026Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
4027Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
4028Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4029Repairing and reconditioning of ATS Starter 12.50 HP
4030Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete., and as directed by TWAD Board officers.
4031Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
4032Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
4033Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
4034Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4035Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4036Repairing and reconditioning of ATS Starter 25 HP
4037Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
4038Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
4039Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
4040Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
4041Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4042Supply and Delivery of PLA Safety Relay suitable for the starter
4043Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
4044Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4045Repairing and reconditioning of DOL Starter 1 HP
4046Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4047Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4048Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4049Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4050Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4051Repairing and reconditioning of DOL Starter 2 HP
4052Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4053Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4054Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4055Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4056Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4057Repairing and reconditioning of DOL Starter 3 HP
4058Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4059Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4060Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4061Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4062Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4063Replacement of Electrical items
4064Volt meter SR 96 600 V-AC
4065Ammeter SR 96 5D/5A C.T.operated-AC
4066LED Outdoor fittings a) 30 W LED street light fittings
4067Supply, delivery and fixing of 200 AMPS porcelain Fuse unit (500V) with fuse
4068Supply, delivery and fixing of 100 AMPS porcelain Fuse unit (500V) with fuse wire in the existing place inside the pump room for sump
4069Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/ 440V 50 HZ conforming to ISS:2834 with ISI marking
4070Sump Cleaning
4071Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
40722.2 LL capacity of sump @ Head works
40734.00 LL capacity of sump @ Vanathirayanpattiam
40742.00 LL capacity of sump @ Kazhuvanthondi Booster
40750.3 LL capacity of sump @ Pilichikuli, Cholakuruchi, Keelaveli
40761.00 LL capacity of Stand Post @ Kallathur, Vankudy
40771.50 LL capacity of Stand Post @ Periayavalaiyam, Radhapuram
4078Supply and delivery of electrode assembly suitable for water disinfection equipment using silver ionization process using pure silver metal electrode and fixed on PVC/Nylon sheets and nuts with electrical leads for the following capacities. The supply should be with the quality test certificate from approved organisations. (For 2 time eloctroedes replacement per year)
40792,00,000 LPH
408010,000 LPH
4081Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
4082For the Year 2027-2028(From 01.04.2027 to 31.03.2028)
4083Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
4084Leak and Burst
4085Attending Minor/ Major Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II. (The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
4086PVC / HDPE Pipes - Minor/ Circumferential Leak
408763mm 4 ksc PVC Pipes
408875mm 4 ksc PVC Pipes
408990mm 4 ksc PVC Pipes
4090110mm 4 ksc PVC Pipes
4091140mm 4 ksc PVC Pipes
409250mm 6 ksc PVC Pipes
409363mm 6 ksc PVC Pipes
409475mm 6 ksc PVC Pipes
409590mm 6 ksc PVC Pipes
4096110mm 6 ksc PVC Pipes
4097140mm 6 ksc PVC Pipes
4098160mm 6 ksc PVC Pipes
4099160mm HDPE PN6 Pipes
4100250mm HDPE PN6 Pipes
4101280mm HDPE PN6 Pipes
4102315mm HDPE PN6 Pipes
4103355mm HDPE PN6 Pipes
4104160mm HDPE PN8 Pipes
4105355mm HDPE PN8 Pipes
4106PVC / HDPE Pipes - Major Burst
410763mm 4 ksc PVC Pipes
410875mm 4 ksc PVC Pipes
410990mm 4 ksc PVC Pipes
4110110mm 4 ksc PVC Pipes
4111140mm 4 ksc PVC Pipes
411250mm 6 ksc PVC Pipes
411363mm 6 ksc PVC Pipes
411475mm 6 ksc PVC Pipes
411590mm 6 ksc PVC Pipes
4116110mm 6 ksc PVC Pipes
4117140mm 6 ksc PVC Pipes
4118160mm 6 ksc PVC Pipes
4119160mm HDPE PN6 Pipes
4120250mm HDPE PN6 Pipes
4121280mm HDPE PN6 Pipes
4122315mm HDPE PN6 Pipes
4123355mm HDPE PN6 Pipes
4124160mm HDPE PN8 Pipes
4125355mm HDPE PN8 Pipes
4126GI Pipes - Above GL
4127125 mm GI pipe
4128100 mm GI pipe
412980 mm GI pipe
413065mm GI pipe
413150 mm GI pipe
4132MS Pipes - Above GL
4133300mm MS
4134350mm MS
4135DI - Minor/ Circumferential Leak
4136200mm DI
4137250mm DI
4138Supply and delivery of GM gate vaves as per IS BS5154 and related IS specification complete and as directed by the TWAD board officers.
413950 mm GM Gate valve
414065 mm GM Gate valve
414180 mm GM Gate valve
414250 mm GM NRV valve
414365 mm GM NRV valve
414480 mm GM NRV valve
4145Repairing and reconditioning of Air Valve in pumping , booster and branch main
414650mm DI Single Chamber Air release Valve
414780mm DI Single Chamber Air release Valve
414850mm CI Double Air Valve
414940mm CI Double Air Valve
415025mm CI Single Air Valve
4151Supply and delivery of DI non return valve IS specification complete and as directed by the TWAD board officers.
415250mm DI Non-Return Valve
415365mm DI Non-Return Valve
415480mm DI Non-Return Valve
4155100mm DI Non-Return Valve
4156250mm DI Non-Return Valve
4157Supply and Delivery of MJ Collars 200mm
4158REPAIR AND RENEWALS
4159Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
4160Repairing and reconditioning of 100 HP HSC Motor including all material, labour, etc
4161Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
4162Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
4163Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
4164Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
4165Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
4166Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
4167Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
4168Transportation charges for conveying the motor from work shop to Pumping Station
4169Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
4170Repairing and reconditioning of 100 HP HSC Pump including all material, labour, etc
4171Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
4172Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
4173Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
4174Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
4175Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
4176Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
4177Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
4178Supply and delivery of Driven End and Non Driven End bearings
4179Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
4180Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
4181Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
4182Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour, etc at Infiltration wells Head works
4183Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4184Transporting the pumpset from Pump House to work shop.
4185Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4186Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4187Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4188Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4189Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4190Repairing and reconditioning of 20 HP Submersible Pumpset including all material, labour, etc
4191Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4192Transporting the pumpset from Pump House to work shop.
4193Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4194Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4195Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4196Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4197Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4198Repairing and reconditioning of 4 HP and 3HP Submersible Pumpset including all material, labour, etc
4199Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4200Transporting the pumpset from Pump House to work shop.
4201Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4202Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4203Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4204Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4205Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4206Repairing and reconditioning of 1 HP Submersible Pumpset including all material, labour, etc
4207Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4208Transporting the pumpset from Pump House to work shop.
4209Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4210Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4211Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4212Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4213Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4214Repairing and reconditioning of 2 HP Submersible Pumpset including all material, labour, etc
4215Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4216Transporting the pumpset from Pump House to work shop.
4217Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4218Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4219Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4220Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4221Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4222Repairing and reconditioning of 1HP Centrifugal Monoblock Pumpset including all material, labour, etc at Keelaveli to Pattiyadi
4223Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
4224Transporting the pumpset from the Pumping Station to work shop.
4225Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
4226Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
4227Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4228Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
4229Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
4230Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
4231Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
4232Repairing and reconditioning of 3 HP Centrifugal Monoblock Pumpset including all material,labour,etc
4233Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
4234Transporting the pumpset from the Pumping Station to work shop.
4235Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
4236Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
4237Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4238Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
4239Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
4240Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
4241Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
4242Repairing and reconditioning of 2 HP Centrifugal Pumpset including all material,labour,etc at Kallathur SP to kallathur
4243Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
4244Transporting the pumpset from the Pumping Station to work shop.
4245Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
4246Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
4247Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4248Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
4249Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
4250Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
4251Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
4252Attending the repair works in Soft Starter 100HP
4253Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
4254Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
4255Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
4256Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
4257Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4258Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
4259Supply and Delivery of PLA Safety Relay suitable for the starter
4260Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
4261Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4262Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
4263Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
4264Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
4265Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4266Repairing and reconditioning of ATS Starter 12.50 HP
4267Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete., and as directed by TWAD Board officers.
4268Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
4269Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
4270Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
4271Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4272Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4273Repairing and reconditioning of ATS Starter 25 HP
4274Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
4275Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
4276Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
4277Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
4278Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4279Supply and Delivery of PLA Safety Relay suitable for the starter
4280Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
4281Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4282Repairing and reconditioning of DOL Starter 1 HP
4283Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4284Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4285Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4286Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4287Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4288Repairing and reconditioning of DOL Starter 2 HP
4289Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4290Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4291Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4292Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4293Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4294Repairing and reconditioning of DOL Starter 3 HP
4295Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4296Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4297Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4298Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4299Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4300Replacement of Electrical items
4301Volt meter SR 96 600 V-AC
4302Ammeter SR 96 5D/5A C.T.operated-AC
4303LED Outdoor fittings a) 30 W LED street light fittings
4304Supply, delivery and fixing of 200 AMPS porcelain Fuse unit (500V) with fuse
4305Supply, delivery and fixing of 100 AMPS porcelain Fuse unit (500V) with fuse wire in the existing place inside the pump room for sump
4306Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/ 440V 50 HZ conforming to ISS:2834 with ISI markingTWAD SR 2022-23/P.205
4307Sump Cleaning
4308Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
43092.2 LL capacity of sump @ Head works
43104.00 LL capacity of sump @ Vanathirayanpattiam
43112.00 LL capacity of sump @ Kazhuvanthondi Booster
43120.3 LL capacity of sump @ Pilichikuli, Cholakuruchi, Keelaveli
43131.00 LL capacity of Stand Post @ Kallathur, Vankudy
43141.50 LL capacity of Stand Post @ Periayavalaiyam, Radhapuram
4315Supply and delivery of electrode assembly suitable for water disinfection equipment using silver ionization process using pure silver metal electrode and fixed on PVC/Nylon sheets and nuts with electrical leads for the following capacities. The supply should be with the quality test certificate from approved organisations. (For 2 time eloctroedes replacement per year)
43162,00,000 LPH
431710,000 LPH
4318Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations.
4319For the Year 2028-2029(From 01.04.2028 to 31.03.2029)
4320Operation and Maintenance of the Electro Mechanical installations, equipements, components,pipelines valves and appurtenances,water retaining structuress including protection of all scheme components from damages /theft undertaking legal actions for such untoward incidents,preventive maintenance, disinfection and deliverance of water as per quality standards and supply of earnmarked quantity of water to the beneficiaries as per stanndard operating procedures,Acts and rules in force and as directected by TWAD Board Oficers and excluding cost towards attending leak,burst repairs and replacement works to electro mechanical installations consumables for disinfection of water,cleaning of all water retaining structure.
4321Leak and Burst
4322Attending Minor/ Major Leaks in the pipelines of this CWSS for the following items as per the standard procedure including earthwork excavation, dewatering, removing, relaying, jointing, civil works, cost of materials and all other incidental charges etc complete with in the stipulated time limit as specified in clause 2.6.4 of General conditions of Contact-Part II. (The specifications for attending leaks has to be detailed based on the data prepared and rate approval obtained for each size and material of pipes.The specification has to be mentioned under the clause 1.7 of GCC-Part-I)
4323PVC / HDPE Pipes - Minor/ Circumferential Leak
432463mm 4 ksc PVC Pipes
432575mm 4 ksc PVC Pipes
432690mm 4 ksc PVC Pipes
4327110mm 4 ksc PVC Pipes
4328140mm 4 ksc PVC Pipes
432950mm 6 ksc PVC Pipes
433063mm 6 ksc PVC Pipes
433175mm 6 ksc PVC Pipes
433290mm 6 ksc PVC Pipes
4333110mm 6 ksc PVC Pipes
4334140mm 6 ksc PVC Pipes
4335160mm 6 ksc PVC Pipes
4336160mm HDPE PN6 Pipes
4337250mm HDPE PN6 Pipes
4338280mm HDPE PN6 Pipes
4339315mm HDPE PN6 Pipes
4340355mm HDPE PN6 Pipes
4341160mm HDPE PN8 Pipes
4342355mm HDPE PN8 Pipes
4343PVC / HDPE Pipes - Major Burst
434463mm 4 ksc PVC Pipes
434575mm 4 ksc PVC Pipes
434690mm 4 ksc PVC Pipes
4347110mm 4 ksc PVC Pipes
4348140mm 4 ksc PVC Pipes
434950mm 6 ksc PVC Pipes
435063mm 6 ksc PVC Pipes
435175mm 6 ksc PVC Pipes
435290mm 6 ksc PVC Pipes
4353110mm 6 ksc PVC Pipes
4354140mm 6 ksc PVC Pipes
4355160mm 6 ksc PVC Pipes
4356160mm HDPE PN6 Pipes
4357250mm HDPE PN6 Pipes
4358280mm HDPE PN6 Pipes
4359315mm HDPE PN6 Pipes
4360355mm HDPE PN6 Pipes
4361160mm HDPE PN8 Pipes
4362355mm HDPE PN8 Pipes
4363GI Pipes - Above GL
4364125 mm GI pipe
4365100 mm GI pipe
436680 mm GI pipe
436765mm GI pipe
436850 mm GI pipe
4369MS Pipes - Above GL
4370300mm MS
4371350mm MS
4372DI - Minor/ Circumferential Leak
4373200mm DI
4374250mm DI
4375Supply and delivery of GM gate vaves as per IS BS5154 and related IS specification complete and as directed by the TWAD board officers.
437650 mm GM Gate valve
437765 mm GM Gate valve
437880 mm GM Gate valve
437950 mm GM NRV valve
438065 mm GM NRV valve
438180 mm GM NRV valve
4382Repairing and reconditioning of Air Valve in pumping , booster and branch main
438350mm DI Single Chamber Air release Valve
438480mm DI Single Chamber Air release Valve
438550mm CI Double Air Valve
438640mm CI Double Air Valve
438725mm CI Single Air Valve
4388Supply and delivery of DI non return valve IS specification complete and as directed by the TWAD board officers.
438950mm DI Non-Return Valve
439065mm DI Non-Return Valve
439180mm DI Non-Return Valve
4392100mm DI Non-Return Valve
4393250mm DI Non-Return Valve
4394Supply and Delivery of MJ Collars 200mm
4395REPAIR AND RENEWALS
4396Rewinding of motors in pumping station in the Electrical, Mechanical and Electro-mechanical items to bring back the scheme / components into normal running conditition as per standard specification including all labour charges, cost of materials and all incidental charges within the stipulated time limit etc., complete as specified in Clause 2.8 of General conditions of Contract Part II etc as directed by TWAD Board officers
4397Repairing and reconditioning of 100 HP HSC Motor including all material, labour, etc
4398Charges for removing the motor from bed after disconnection of power supply cable, Earthing line and Coupling arrangements by using contractor tools and materials.
4399Transportation charges for conveying the motor from the Booster Station to Our work shop including loading and unloading charges.
4400Labour Charges for removing the two end side cover with fan arrangements and the damaged driven end and non driven end bearings.
4401Charges for removing the burnt wires from the rotor assembly and cleaning and checking the slots of rotor and labour charges for rewinding of Centrifugal Squirrel Cage Induction Motor after deducting the cost of old materials and including suppy and delivery of Class ‘F’ Insulation Super enameled Copper wire, required for rewinding and Fiber Glass wire, Fiber Glass Sleeves, Class ‘F’ insulation paper, Copper Socket and FG thread required for rewinding of Squirrel Cage Induction Motor
4402Labour Charges for reconditioning the worn out shaft for driven end and non driven end bearing seating, knurling, bend checking, and etc.,
4403Supply and delivery of Driven End and Non Driven End bearings suitable for the required Induction Motor
4404Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
4405Transportation charges for conveying the motor from work shop to Pumping Station
4406Charges for reassembling the motor with bed and pump coupling, alignment checking connecting power supply cable, including required bolt and Nuts and testing trial running etc.,
4407Repairing and reconditioning of 100 HP HSC Pump including all material, labour, etc
4408Charges for removing the motor from bed assembly after dismantling of Coupling arrangements and removing the pump assembly and including the provision of dummy flange arrangements by using contractor tools and materials.
4409Transportation charges for conveying the Pump assembly from the Pumping Station to work shop including loading and unloading charges.
4410Labour Charges for removing the impeller by using hydralic system, DE and NDE Bearings
4411Labour Charges for reconditioning the worn out shaft including welding the shaft to suit the impeller and suit the driven end and non driven end bearing seating, knurling, bend checking and etc.,
4412Supply, delivery and fixing of Shaft sleeves in Gun metal including machining charges and making key ways after deducting the scrap materials
4413Balancing of Rotor with impeller both dyanamically and Hydralically by using required dyanamic balancing machine
4414Supply, delivery and fixing of Gunmetal seal rings for impeller neck including machining charges after deducting the scrap materials
4415Supply and delivery of Driven End and Non Driven End bearings
4416Labour Charges fixing the DE and NDE bearings correctly and neatly with required lubrications by contractors tools & Materials
4417Transportation charges for conveying the Pump assembly from work shop to Pumping Station.
4418Charges for reassembling the Pump with Motor by using pulley and alignment checking, including required bolt and Nuts and testing trial running etc.,
4419Repairing and reconditioning of 12.50 HP Submersible Pumpset including all material, labour, etc at Infiltration wells Head works
4420Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4421Transporting the pumpset from Pump House to work shop.
4422Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4423Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4424Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4425Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4426Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4427Repairing and reconditioning of 20 HP Submersible Pumpset including all material, labour, etc
4428Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4429Transporting the pumpset from Pump House to work shop.
4430Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4431Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4432Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4433Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4434Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4435Repairing and reconditioning of 4 HP and 3HP Submersible Pumpset including all material, labour, etc
4436Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4437Transporting the pumpset from Pump House to work shop.
4438Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4439Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4440Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4441Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4442Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4443Repairing and reconditioning of 1 HP Submersible Pumpset including all material, labour, etc
4444Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4445Transporting the pumpset from Pump House to work shop.
4446Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4447Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4448Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4449Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4450Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4451Repairing and reconditioning of 2 HP Submersible Pumpset including all material, labour, etc
4452Removing the Submersible pumpset by using tripod set after disconnecting the power supply cable and delivery pipe line fittings
4453Transporting the pumpset from Pump House to work shop.
4454Rewinding the submersible motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4455Reconditioning the worn-out shaft and fittings, impeller and Gun Metal/ SS Bushes including cost of lath work & labour charges etc.,
4456Replacement of carbon type thrust bearing and pumpside Gun Metal Bush including cost of labour charges after deducting the cost of old material
4457Transporting charges for Submersible pumpset from work shop to Pump House after attending repair works.
4458Re-erection of pumpset in the Sump / Well by using tripod set and required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipeline arrangements testing to trial pumping.
4459Repairing and reconditioning of 1HP Centrifugal Monoblock Pumpset including all material, labour, etc at Keelaveli to Pattiyadi
4460Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
4461Transporting the pumpset from the Pumping Station to work shop.
4462Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
4463Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
4464Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4465Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
4466Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
4467Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
4468Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
4469Repairing and reconditioning of 3 HP Centrifugal Monoblock Pumpset including all material,labour,etc
4470Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
4471Transporting the pumpset from the Pumping Station to work shop.
4472Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
4473Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
4474Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4475Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
4476Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
4477Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
4478Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
4479Repairing and reconditioning of 2 HP Centrifugal Pumpset including all material,labour,etc at Kallathur SP to kallathur
4480Removing the Monblock Centrifugal Pumpset from the Bed assembly by using contractors tools and materials after disconnecting the power supply cable and delivery pipe line fittings with required dummy plate arrangements.
4481Transporting the pumpset from the Pumping Station to work shop.
4482Removing the Burnt winding materials from the stator slots and cleaning the stator and rotor assembly by using contractor tools and materials
4483Reconditioning the worn-out shaft and fittings, impeller and Rope gland bush including cost of lath work & labour charges etc.,
4484Rewinding the Monblock Centrifugal Motor using best quality winding wire including cost of wire, Sleeve, other insulating and fibre class materials after deducting the cost of old materials.
4485Replacement of driven end (No: XXXX) and Non driven end (No:XXXX) Bearings suitable for Monblock Centrifugal Motor including the cost of Bearing and labour charges after deducting the cost of old materials.
4486Replacement of cooling fan at motor end and Terminal Board for suitable for Monblock Centrifugal Pumpset and labour charges after deducting the cost of old materials.
4487Transporting charges for Monblock Centrifugal Pumpset from work shop to Pump House after attending repair works.
4488Re-erection of pumpset in the Sump / Well by using required Rubber washer and Bolt & Nuts and connecting the power supply cable and delivery pipe line arrangements, testing and trial pumping.
4489Attending the repair works in Soft Starter 100HP
4490Labour Charges for removing the Burnt FCMA Coil, After Disconnecting the terminal connection and fixing the FCMA Coil after attending the rewinding work.
4491Charges for Conveying the FCMA Coil from pumping Station to workshop and Workshop to pumping Station
4492Labour Charges for Removal of unservicable contactor with all terminal connection suitable for the starter
4493Labour Charges for Removal of Single Phase Preventer, Timer, CT Coil, Volt Meter, Ammeter, Selector Switch and PLA safety Relay suitable for the starter
4494Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4495Charges for Removing the old wire from the FCMA Coil ,Cleaning, Rewinding of FCMA Coil and supply and delivery of Double Coated Enamel Copper Wire and all insulation materials after deducting old scrap materials etc., complete
4496Supply and Delivery of PLA Safety Relay suitable for the starter
4497Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
4498Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4499Replacement of Tin Copper Fibre Glass Wire for Main Control Wire suitable for the starter after deducting the old scrap value as directed by TWAD Board Officers.
4500Replacement of Side mounting Add-on Auxillary Contact Block including the cost of material Suitable for the starter, as directed by TWAD Board Officers.
4501Replacement of CT Coil with suitable Clamp Suitable for the starter as directed by TWAD Board Officers.
4502Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4503Repairing and reconditioning of ATS Starter 12.50 HP
4504Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete., and as directed by TWAD Board officers.
4505Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
4506Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
4507Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
4508Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4509Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4510Repairing and reconditioning of ATS Starter 25 HP
4511Labour Charges for removing the Burnt ATS Coil after draining the contaminated oil and cleaing the oil tank and fixing the ATS Coil after attending the rewinding work and filling the required oil in the oil tank etc., Complete,as directed by TWAD Board officers.
4512Charges for Conveying the ATS Coil from pumping Station to workshop and Workshop to pumping Station
4513Charges for Removing the old wire from the ATS Coil , Cleaning, Rewinding of ATS Coil by using double Coated Enamel Copper Wire and all insulation materials including the cost of materials after deducting old scrap materials etc., complete
4514Labour Charges for Removal of unservicable / burnt contactor with terminal connection Single Phase Preventer, Timer, OLR, CT Coil and PLA safety Relay suitable for the starter
4515Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4516Supply and Delivery of PLA Safety Relay suitable for the starter
4517Replacement of On delay / OFF Delay Timer including the cost of material suitable for the starter as directed by TWAD Board officers.
4518Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4519Repairing and reconditioning of DOL Starter 1 HP
4520Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4521Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4522Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4523Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4524Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4525Repairing and reconditioning of DOL Starter 2 HP
4526Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4527Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4528Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4529Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4530Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4531Repairing and reconditioning of DOL Starter 3 HP
4532Labour Charges for Removal and Re-fixing of unserviceable or burnt Single phase Preventer, MCB, Over load Relay, terminal block , Contactor and capacitor for the starter
4533Replacement of required capacity moving kit of Contactor, and No Volt Coil suitable for the starter including the cost of materials etc., complete
4534Charges for Replacement of burnt control circuit wire, ON / OFF Switch and required Main Wire including required cable crimping work in the starter including the cost of materials etc., complete
4535Replacement of Terminal block Suitable for the starter as directed by TWAD Board Officers.
4536Replacement of power supply Phase indicator, ON / OFF Indicator suitable for the starter.
4537Replacement of Electrical items
4538Volt meter SR 96 600 V-AC
4539Ammeter SR 96 5D/5A C.T.operated-AC
4540LED Outdoor fittings a) 30 W LED street light fittings
4541Supply, delivery and fixing of 200 AMPS porcelain Fuse unit (500V) with fuse
4542Supply, delivery and fixing of 100 AMPS porcelain Fuse unit (500V) with fuse wire in the existing place inside the pump room for sump
4543Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/ 440V 50 HZ conforming to ISS:2834 with ISI markingTWAD SR 2022-23/P.205
4544Sump Cleaning
4545Cleaning of all storage points like sumps, stand posts of various capacities available in this scheme at a frequency of once in two months including scrapping the inner side of compartment completely, dewatering, desilting using rquired machineries , materials , labour, all incidental chargs , application of bleaching powder/ solution etc complete and as directed by TWAD Board officers
45462.2 LL capacity of sump @ Head works
45474.00 LL capacity of sump @ Vanathirayanpattiam
45482.00 LL capacity of sump @ Kazhuvanthondi Booster
45490.3 LL capacity of sump @ Pilichikuli, Cholakuruchi, Keelaveli
45501.00 LL capacity of Stand Post @ Kallathur, Vankudy
45511.50 LL capacity of Stand Post @ Periayavalaiyam, Radhapuram
4552Supply and delivery of electrode assembly suitable for water disinfection equipment using silver ionization process using pure silver metal electrode and fixed on PVC/Nylon sheets and nuts with electrical leads for the following capacities. The supply should be with the quality test certificate from approved organisations. (For 2 time eloctroedes replacement per year)
45532,00,000 LPH
455410,000 LPH
4555Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations. Please Enable Macros to View BoQ information
4556Supply, delivery and application of disinfection dosages as per standard norms / guidelines including cost of disinfectents such as bleaching powder/ Common Salt as applicable. The supply should be with the quality test certificate from approved organisations. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58467648
AUTHORITY Government Departments
TENDER VALUE 14.24 Crore
LAST DATE 07-12-2026
Authority
Authority Name Tamilnadu Water Supply And Drainage Board
Work Description Tender for Operation And Maintenance Of The 7 Nos Of Cwss In Ariyalur District (Pkg-27 B), Including Repair, Rectification Works And Supply Of Chemicals For The Period From 01.01.2027 To 31.03.2029
Basic Detail
Tender No 8 F O and M of CWSS SDO CE TNJ 2026
Bidding Type Tender
Location
City Ariyalur
State Tamil Nadu
Key Dates
Publish Date 17 Nov 2026
Submission Date 07 Dec 2026
Open Date 01 Jan 0001
Finance
Tender Value 14.24 Crore
Tender Fee Ref. Documents
EMD 10.68 Lakhs
Exemption Not Available
Document List
613b86b2-9cce-4638-82d9-e888c7403289.html
Beneficiarieslist2.pdf
BID7NOSALR.pdf
BOQ_869933.xls
Salientdetails.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 19 days
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

613b86b2-9cce-4638-82d9-e888c7403289.html

pdf

Beneficiarieslist2.pdf

pdf

BID7NOSALR.pdf

xls

BOQ_869933.xls

pdf

Salientdetails.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender