Tender For Road Safety Works On The Godariya-Muradih Road In Kushinagar District
Tender Value
5.50 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
3 days left
EMD
55000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kushi Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Road Safety Works On The Godariya-Muradih Road In Kushinagar District
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. {90 cm equilateral trinagle }at each market (for Rumble Strip & Zebra , Built up area)/at each branch / side road / intersection /School/Market |
| 2 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. { 80X60 Rectanglar at each market } |
| 3 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. { 90 cm octagonal } 90 cm octagonal stop sign at each branch / side road |
| 4 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. { Hazard Marker 30 cm x 90 cm LEFT/RIGHT } |
| 5 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 75x75x6 mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. {CHEVERON 50cmx60 cm} |
| 6 | Road DelineatorDelineator Supply & Fixing of MS Delineator made of Mild Steel with pure polyester powder coating wit the minimum thickness of powder coating of not less than 40 micron for protection against corrosion the surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steel Guide poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtainl clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexiblilty, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering |
| 7 | Providing and fixing reflective tree plate size 15x15 cm consisting type xi sheeping over 1.5 mm thick aluminium sheet including labour material and T&P etc complete. |
| 8 | Reflective raised pavement markers (Cat eye/Road stud)Supply and fixing of raised pavement marker with made of plastic body of RPM/Road stud shall be moulded from ASA (Acrylic styrene Acrylonitrite) or HIPS (High impact polystyrene) or Acryloniitrite Butadien styrene (ABS) or any other suitable material approved by the engineer. The Marker shall support a load of 13.635 kg tested in accordance with ASTM D4280 with ASTM D 4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be moulded of methyl methecrylate conforming to ASTM D788 of equivalent. The slop or retro reflecting surface shall be preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sqcm the marker height shall not be less than 10 mm and shall not exceed 20 mm and width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade |
| 9 | 12-15M Span overhead structure with 300 dia MS Two vertical post- Supply fixing & eraction of built up cantilevere of 12-15M span comprising of two vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm MS plate at bottom. The horizontal truss shall comprise of 50 mm dia heavy class MS. Pipe and 40 mm dia heavy MS pipe as bracing & 10 mm MS plate at bottom for fixing to verticlal post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. the work includes construction of RCC Foundation of size 0.90x0.90 mm of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick lean Concrete in 1:4:8 (cement coarse sand and 40 mm gauge S.B) RCC with 1:2:4 (Cement coarse sand and 20 Mm stone grit) including supply and fixing of 25 mm dia foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering the lateral vertical clearances and complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender