Tender For Thanjavur District-15Th Finance Savings Fund 2026-2027 Construction Of 10000 Lit Oht And Pump Room At Koliyar Street In Kanniyakurichi Panchayat.
Tender Value
8.68 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
8680
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvarur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Thanjavur District-15Th Finance Savings Fund 2026-2027 Construction Of 10000 Lit Oht And Pump Room At Koliyar Street In Kanniyakurichi Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of 10000 lit OHT and Pump Room at AD Colony in Palaverikadu Panchayat. |
| 2 | Earth work excavation and depositing on bank with an initial lead of 10m and initial lift of 2m in Sand or other loose soils, wel sand, not under wter, silt light black cotton soil, sandy loom and ordinary soil - SS 20B et complete as directed by officers First depth of 2m From 0 to 2 m below GL |
| 3 | Earth work excavation and depositing on bank with an initial lead of 10m and initial lift of 2m in Sand or other loose soils, wel sand, not under wter, silt light black cotton soil, sandy loom and ordinary soil - SS 20B et complete as directed by officers Second depth of 2m From 2m to 4 m below GL |
| 4 | Supplying and filling with Msand in layers of not more than 15 cm thick for foundation including cost and conveyance of all materials and labour charges other charges. |
| 5 | Cement concrete 1:4:8 mix (one cement four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication. |
| 6 | RCC(M30)GRADE using broken stone 20mm size excluding cost of steel and centering and shuttering but including cost of labour charges for mixing placing,finishing and curing etc., complete |
| 7 | a) For raft below GL ( 1.50-4.50)below GL |
| 8 | b)For coloum and brace upto GL (0-1.50)below GL |
| 9 | C)For coloum and Middle brace upto (0-3.58m) above GL |
| 10 | D)For coloum beam floor slab and side wall from GL 3.58-6.85m above GL |
| 11 | e) For side wall and Roof slab 7.35-8.35 above GL |
| 12 | Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the TWAD Board Officers. |
| 13 | PLANE SURFACES |
| 14 | Below GL Raft side |
| 15 | For GL brace and Middle brace |
| 16 | For Floor Beam and Bottom of Floor slab |
| 17 | Curved surface -6.00 to 8.45m For side wall& Roof slab sides Hanch |
| 18 | SQUARE COLUMN |
| 19 | For coloum Below GL |
| 20 | For GL to 3.30 m |
| 21 | For coloum 3.30m to4.30m |
| 22 | For coloum 4.30m to5.30m |
| 23 | For coloum 5.30m to6.30m |
| 24 | For coloum 6.30m to6.85m |
| 25 | Distember Painting of two coats of approved colour including cost and conveyance and all labour charges etc complete . |
| 26 | Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification. |
| 27 | Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers. |
| 28 | RCC INSIDE ACCESS LADDER |
| 29 | RCC 1:1.5:3 (one cement,one and half sand and three 20mm HBG stoneexcluding the cost of reinforcement and centering and shuttering but including curing finishing, etc.complete |
| 30 | Supply, fabrication, placing in position of steel rods cutting tying etc.complete including cost of reinfor cement RTS rods |
| 31 | Centering, for soffits of RCC works including strutting shuttering charges etc. complete |
| 32 | RCC Manhole cover |
| 33 | Supply and delivery of 25 x 25 x 6 mm angle for supporting legs. 1x4x0.75=3.00 m x 1.80Kg/m=5.4 Kg |
| 34 | Centering, for soffits of RCC works including strutting shuttering charges etc. complete ( 4 x 0.75 x 0.075) |
| 35 | Supply, fabrication, placing in position of steel rods cutting tying etc.complete including cost of reinforcement RTS rods- UP TO 16 MM( 2x4x0.70=5.60m x 0.39 kg= 2.184 kg |
| 36 | RCC 1:1.5:3 (one cement,one and half snd and three 20mm HBG stone (1x0.75x0.75x0.075) |
| 37 | Refilling with excavated earth (other than sand complying with standard specification for filling in trenches. |
| 38 | PIPE LINE |
| 39 | 65mmdiaGI pipes for tank connection |
| 40 | 65mmdiaG.M Gate valve |
| 41 | 65mm Dia Non Return Valve |
| 42 | 65mmdiaGI coupling |
| 43 | 65mmdiaGI Elbow |
| 44 | 65mmdiaGI Bend |
| 45 | 65mmdiaGI Flange set |
| 46 | 65mmdiaGI Union |
| 47 | Provision for Water meter, Dirt Box including erection charges. |
| 48 | Provision for Chlorinator |
| 49 | Provision For Pump Room |
| 50 | Earthwork excavation and depositing on bank with initial lift of 2.00m in hard stiff clay, Stiff Black cotton soil, hard red earth, shales, Murram etc., as per SS 20 B |
| 51 | Sand filling with good M sand including cost and conveyance of all materials and all labour charges etc complete |
| 52 | CC 1:4:8 using 40mm HBS jelly for foundation including cost and conveyance of all materials and all labour charges etc complete |
| 53 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x41/4\\"x23/4\\" and conveyance of all materials to site and all labour charges etc complete Below Basement |
| 54 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x41/4\\"x23/4\\" and conveyance of all materials to site and all labour charges etc complete Above Basement |
| 55 | RCC 1:1:5:3 using 20mm HBS including cost and conveyance of all materials and all labour charges etc complete |
| 56 | Centering charges for lintel and roof slab including strutting including cost and conveyance of all materials and all labour charges etc complete |
| 57 | Plastering the brick work with CM 1:5 - 12mm thick including curing etc., complete |
| 58 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 59 | Providing Gronolithic pattern floor finish in CC 1:2:4 Mix Using 10-12 mm ISS Metal to 25mm thick including cost and conveyance of all materials to site and all labour charges |
| 60 | Supply and fixing of MS door of sizes 0.90 x 2.00m(Single leaf) in MS angle 50mmx 50mm x6mm, and MS flat 35mmx 35mm x6mm with MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangement using 20mm square MS |
| 61 | Painting new Iron Work two coats including cost and conveyance of all materials to and all labour charges etc.complete for 10 sqm |
| 62 | Supply fabrication and fixing in position of RTS rods including cost of steel and binding wire etc., complete |
| 63 | Supply anf fixing of RCC post box type jolly of size 0.60mx0.45m |
| 64 | Distember painting two coats with approved Colour paint including cost and conveyance of all materials to and all labour charges etc.complete for 10 sqm |
| 65 | Fininshing the top of roof with one course of pressed tiles 23x23x2with cm 1:3 mix and Pointing with same Mortar including cost and conveyance etc. Complete |
| 66 | Electrification charges |
| 67 | Light Point/ Fan Point SD 18 |
| 68 | Plug Point SD 38 |
| 69 | Meter Board SD 125 |
| 70 | service pipe - SD 71 |
| 71 | Bulk Head SD 83 |
| 72 | Service Main SD 66 |
| 73 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender