Tender For Construction Of Sri Dadhibaman Mahaprabhu Kalyan Mandap & Amenity Centre
Tender Value
54.55 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
8 days left
EMD
54600
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sri Dadhibaman Mahaprabhu Kalyan Mandap & Amenity Centre
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work : AR0102aa (Earth work in hard soil or gravelly soil foundation & plinth within 50m. Initial lead and 1.5m initial lift) : Earth work in hard soil or gravelly soil foundation & plinth within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge |
| 2 | Earth Work : AR0115 (Filling foundation and plinth with sand well watered and rammed) : Filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalty, taxes of all materials, labours and T & P required for the work etc. complete and as per direction of Engineer-in charge. |
| 3 | Concrete : AR0303 (Cement concrete (1:3:6) with 4 cm. Crusher Broken hard granite metal) : Cement concrete (1:3:6) with 4 cm. hard granite(Crusher Broken) metal including laying in layers not exceeding 300 mm in depth, ramming, compacting to proper thickness, watering and curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge. |
| 4 | Masonry Brick Work : AR0603c (Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:6) in foundation and plinth) : Brickwork with Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:6) in foundation and plinth having crushing strength not less than 75.00 Kg/cm2 with dimensional tolerance ±8 percent immersing the bricks in water not less than six hours with cost conveyance, royalty, taxes of all materials, labor, and T&P required for the work, etc. complete and as per direction of Engineer-in-charge. |
| 5 | Masonry Brick Work : AR0603ci (Flyash Bricks of size (25cm x 12cm x 8cm) in cement mortar (1:6) in superstructure) : Brickwork with Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:6) in superstructure having crushing strength not less than 75.00 Kg/cm2 with dimensional tolerance ±8 percent immersing the bricks in water not less than six hours with cost conveyance, royalty, taxes of all materials, labor, and T&P required for the work, etc. complete and as per direction of Engineer-in-charge. |
| 6 | R.C.C. Work : AR0404Aa (Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge (RCC foundation, footing bases of column, mass concreate, pre-cast slabs etc.) |
| 7 | R.C.C. Work : AR0404Ac (Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge. (RCC Beams, Column, Girder & Bressmer etc) |
| 8 | R.C.C. Work : AR0404Ab (Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge (RCC Plinth band) |
| 9 | R.C.C. Work : AR0404Ad (Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge (RCC Lintels) |
| 10 | R.C.C. Work : AR0404Ae (Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge (RCC Stairs excluding landing but including railing) |
| 11 | R.C.C. Work : AR0404Ag (Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge (RCC Roof slab, landing, balcony, sun shade) |
| 12 | R.C.C. Work : AR0401 (R.C.C work) : 'Reinforced cement concrete (1:2:4) work with 12mm size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge. (To be used for minor repair work only) |
| 13 | R.C.C. Work : AR0409 (Supplying, fitting, and placing uncoated HYSD bar reinforcement including labor charges for cutting, bending, binding, and tying the grills and placing in position) : Supplying, fitting, and placing uncoated HYSD bar reinforcement including labor charges for cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge with cost of steel rod and as per drawing, design, and direction of Engineer-in-charge. |
| 14 | Masonry Brick Work : AR0603ci (First floor) : Brickwork with Flyash Bricks of size (23cm x 11cm x 8cm) in cement mortar (1:6) in superstructure having crushing strength not less than 75.00 Kg/cm2 with dimensional tolerance ±8 percent immersing the bricks in water not less than six hours with cost conveyance, royalty, taxes of all materials, labor, and T&P required for the work, etc. complete and as per direction of Engineer-in-charge. |
| 15 | R.C.C. Work : AR0404Ac (First Floor) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge. (RCC Beams, Column, Girder & Bressmer etc) |
| 16 | R.C.C. Work : AR0404Ad (First Floor) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge (RCC Lintels) |
| 17 | R.C.C. Work : AR0404Ag (First Floor) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge (RCC Roof slab, landing, balcony, sun shade) |
| 18 | R.C.C. Work : AR0409 (First floor) : Supplying, fitting, and placing uncoated HYSD bar reinforcement including labor charges for cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge with cost of steel rod and as per drawing, design, and direction of Engineer-in-charge. |
| 19 | Plastering : AR1027 (6mm thick cement Plaster in CM (1:4) over R.C.C. surfaces including chipping (Inside)) : 6mm thick cement Plaster in CM (1:4) over R.C.C. surfaces in inside including chipping with proper level and line, curing for the proper period with cost conveyance, royalty, taxes of all materials, labor, and T & P required for the work, etc comp. and as per the direction of the Engineer-in-charge. |
| 20 | Plastering : AR1004i (12mm thick cement plaster (1:6) over Brick work in outside.) : 12mm thick cement plster (1:6) over Brick work in outside including racking out joints finishing smooth with proper plumb and line curing for proper period with cost conveyance, royality, taxes of all materials, labour and T & P required for the work etc. comp.and as per direction of Engineer-in-charge. |
| 21 | Plastering : AR1004i (First Floor) : 12mm thick cement plster (1:6) over Brick work in outside including racking out joints finishing smooth with proper plumb and line curing for proper period with cost conveyance, royality, taxes of all materials, labour and T & P required for the work etc. comp.and as per direction of Engineer-in-charge. |
| 22 | Plastering : AR1026 (First Floor) : 6mm thick cement Plaster in CM (1:4) over R.C.C. surfaces in inside with proper level and line, curing for the proper period with cost conveyance, royalty, taxes of all materials, labor, and T & P required for the work, etc comp. and as per the direction of the Engineer-in-charge. |
| 23 | Plastering : AR1014 (16mm thick cement Plaster in CM (1:6) over brick work in inside.) : 16mm thick cement Plaster in CM (1:6) over brick work in inside including racking out joints finishing smooth with proper plumb and line, curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T & P required for the work etc comp.and as per direction of Engineer-in-charge. |
| 24 | Plastering : AR1014 (First Floor) : 16mm thick cement Plaster in CM (1:6) over brick work in inside including racking out joints finishing smooth with proper plumb and line, curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T & P required for the work etc comp.and as per direction of Engineer-in-charge. |
| 25 | Other Building Items. : AR1901B (First floor) : Supplying, fitting & fixing Vitrified Tile 600mmx600mm Plain Ivory in floors of size 600mm x 600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar(1:4)and filling joints with white cement of approved quality including cost of all materials, taxes, labour, T&P , etc. required for the work all complete as per direction of Engineer-in-charge(for new work only) |
| 26 | Flooring : AR0817aa (First floor) : Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm plain (Ivory) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the Vitrified tiles including rubbing and polishing complete including cost of precast tiles. |
| 27 | Flooring : AR0816 (First floor) : Fixing ceramic Tiles (30cmx30cm / 40cmx40cm special plain/printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755) in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 (1cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the ceramic tiles including rubbing and polishing, cost of precast tiles complete as per direction of Enginer-in-charge. |
| 28 | Flooring : AR0817b (First floor) : Fixing ceramic tiles (20cmx30cm / 20cmx20cm special plain/printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753) in wall cladding on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the ceramic tiles including rubbing and polishing, cost of precast tiles complete as per direction of Engineer-in-charge. |
| 29 | Flooring : AR0816e (Fixing Granite Tiles Up to 0.10 Sqm. 10mm thick in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 ) : Fixing Granite Tiles Up to 0.10 Sqm. 10mm thick in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 (1cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the Granite tiles including rubbing and polishing, cost of precast tiles complete as per direction of Enginer-in-charge. |
| 30 | Other Building Items. : AR1902 (cement based wall putty (water based)) : Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes,labour,T&P,etc.complete. and as per the direction of Engineer in Charge. |
| 31 | Other Building Items. : AR1902 (First Floor) : Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes,labour,T&P,etc.complete. and as per the direction of Engineer in Charge. |
| 32 | Painting : AR0901ci (Priming one coat with outer surface primer of approved quality oil-bound primer over plastering surfaces(Outer surface)) : Priming one coat with outer surface primer of approved quality oil-bound primer over plastering surfaces including cost conveyance, taxes of all materials, labor and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 33 | Painting : AR0901d (Priming one coat with inner surface primer of approved quality water-bound primer over plastering surfaces (Inner surface)) : Priming one coat with inner surface primer of approved quality water-bound primer over plastering surfaces including cost conveyance, taxes of all materials, labor and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 34 | Painting : AR0901ci (First Floor) : Priming one coat with outer surface primer of approved quality oil-bound primer over plastering surfaces including cost conveyance, taxes of all materials, labor and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 35 | Painting : AR0901d (First Floor) : Priming one coat with inner surface primer of approved quality water-bound primer over plastering surfaces including cost conveyance, taxes of all materials, labor and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 36 | Painting : AR0920 (Finishing wall two coats with plastic emulsion paint of approved shades on new work (Inside)) : Finishing wall two coats with plastic emulsion paint of approved shades on new work to give an even shade including all costs of labor, Paint and Brushes required for the work, etc. complete and as per direction of the Engineer-in-charge.(Inside) |
| 37 | Painting : AR0920 (First Floor) : Finishing wall two coats with plastic emulsion paint of approved shades on new work to give an even shade including all costs of labor, Paint and Brushes required for the work, etc. complete and as per direction of the Engineer-in-charge.(Inside) |
| 38 | Painting : AR0917f (Finishing wall with one coat weather coat paint of approved shade in the outer surface of old work. (Outside)) : Finishing wall with one coat weather coat paint of approved shade in the outer surface of old work to give an even shade including all costs of labour, Paint and Brushes required for the work, etc. complete and as per direction of Engineer-in-charge. (Outside) |
| 39 | Painting : AR0917f (First Floor) : Finishing wall with one coat weather coat paint of approved shade in the outer surface of old work to give an even shade including all costs of labour, Paint and Brushes required for the work, etc. complete and as per direction of Engineer-in-charge. (Outside) |
| 40 | Iron Work : AR1704 (Iron Doors and windows fixing) : Supplying, fitting & fixing of Mild steel and put up for frames & shutters of Doors and windows fixing in position with cost, conveyance, taxes of all materials, labours and T & P required for the work etc. as per direction of Engineer-in-charge. |
| 41 | Painting : AR0903b (Painting two coats of enamel paint with a coat of red oxide primer over iron surface) : Painting two coats of enamel paint with a coat of red oxide primer over iron surface including all costs of labour, Paint, Primer, brushes and putty required for the work etc. complete and as per direction of Engineer-in-charge. |
| 42 | Painting : AR0903b (First Floor) : Painting two coats of enamel paint with a coat of red oxide primer over iron surface including all costs of labour, Paint, Primer, brushes and putty required for the work etc. complete and as per direction of Engineer-in-charge. |
| 43 | miscellaneous : ARM297 (Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. (New miscellaneous items) and as directed by Engineer-in-Charge.) : Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. (New miscellaneous items) and as directed by Engineer-in-Charge. |
| 44 | Wood Work : AR1205c (Providing and fixing ISI marked flushed door shutters confirming to IS:2202(Part-I) decorative type, core of 25 mm thick block board) : Providing and fixing ISI marked flushed door shutters confirming to IS:2202(Part-I) decorative type, core of 30mm thick block board embedded with 30mm thick teak wood bitto as leaping and well matched 1.5 mm thick decorative laminate of teak three ply veneering with vertical grains or cross bands and face veneer on both faces of shutters with adhesive and complete in all respect. including cost of materials, necessary fittings, labour, conveyance, taxes of all materials, T&P, etc . requiered for work and as per direction of Engineer in charge. |
| 45 | Other Building Items. : AR1911 (Stainless steel of 304 grade in hand railing using 50mm dia of 2mm) : Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost,conveyance, taxes of all materials, labour,T&P etc. required for the complete in all respect. and as per direction of Engineer in Charge |
| 46 | Other Building Items. : AR1901B (Vitrified Tile 600mmx600mm Plain Ivory) : Supplying, fitting & fixing Vitrified Tile 600mmx600mm Plain Ivory in floors of size 600mm x 600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar(1:4)and filling joints with white cement of approved quality including cost of all materials, taxes, labour, T&P , etc. required for the work all complete as per direction of Engineer-in-charge(for new work only) |
| 47 | Flooring : AR0817aa (Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm plain (Ivory) in dados skirting and risers of steps on 12mm thick cement plaster (1:3)) : Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm plain (Ivory) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the Vitrified tiles including rubbing and polishing complete including cost of precast tiles. |
| 48 | Roofing : AR1132 (Supplying, feeting & fixing of G.C.I. Sheet (0.30mm thick) in roof drilling hole in wind ties) : Supplying, fitting & fixing of G.C.I. Sheet (0.30mm thick) in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. including cost of fitting, Labour and material etc. complete as per direction of Engineer-in-Charge |
| 49 | Iron Work : AR1701 (Labour for hoisting joints, trusses and placing in position ) : Labour for hoisting joints, trusses and placing in position with all cost of labour and machinery and T & P required for the work etc. as per direction of Engineer-in-Charge. |
| 50 | Iron Work : AR1703 (Iron work wrought and put up in trusses and record racks) : Iron work wrought and put up in trusses and record racks including all cost of labour, material, machinery and T & P required for the work etc. as per direction of Engineer-in-Charge. |
| 51 | Providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/1989(Sch-80) and pipe fittings of the following nominal bore and pipe fittings with clamps including making good the ceiling and floor testing etc all complete as per direction of the E.I.C. |
| 52 | 25mm dia PVC ASTM pipe (sch-80) |
| 53 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 54 | 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 55 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 56 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 57 | 25mm dia brass full way valve (Shakti make) |
| 58 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 59 | 125mm CP grating |
| 60 | 15mm size C.P. flange |
| 61 | 15mm 100 x 100 mm CP Shower |
| 62 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge |
| 63 | 1000 liters capacity PVC water storage tank |
| 64 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 65 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 66 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 67 | 110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 68 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 69 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 70 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 71 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 72 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 73 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 74 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 76 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 77 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 78 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 79 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 80 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 81 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 82 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 83 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 84 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 85 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 86 | 25mmx600mm long CP towel rail |
| 87 | Towel ring |
| 88 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 89 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 90 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 91 | 600mmx450mm size B.E mirror (swivelled type) |
| 92 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 93 | CP soap holder |
| 94 | Labour for drilling a perfectly vertical bore hole of specifieddia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200psi) as per required to suit the site condition as per Engineer-in-charge including use of qwn rigs with its accessories, Tools & plants and consumables etc for lowering of 125mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to provided by the contractor including lowering and withdrawing after completion of the tube well). |
| 95 | Lowering of 125mm dia GI / PVC casing pipes with or without slotted pipes as per necessity from ground and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging the tubewell to prevent entry of foreign materials from above. (minimum 1.0 mtr. of casing pipe has to be inserted and embedded at the bottom in hard rock in each bore to ensure sanitary sealing). |
| 96 | Cleaning and developing the tubewells with their own compressor continuously worked till clear and adequate discharge (14 lpm) is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of the Engineer-in-charge. |
| 97 | Supply & testing of 1 phase starter suitable for running submersible pump set rising from 1 HP to 3 HP motor with power contactor, with selector switch slide lock fuse, push bottton, phase indicator lamp, off/on indicator lamp etc. complete with all respect including cost of wiring and installation charges. |
| 98 | Supply & testing of 1 phase starter suitable for running submersible pump set rising from 1 HP to 3 HP motor with power contactor, with selector switch slide lock fuse, push bottton, phase indicator lamp, off/on indicator lamp etc. complete with all respect including cost of wiring and installation charges. |
| 99 | Supply of 10mm23 core aluminium armoured cable of 11 KVA grade as per ISI specification of make Havells, Finolex, Crystals etc. |
| 100 | Supply of 2.5mm2 3.5 core submersible copper flat cable as perSI specification of make Havels, Finolex or Crystals etc. |
| 101 | Supply of 6mm2 PVC Coated GI Wire |
| 102 | 30mm Dia GI Bend |
| 103 | 32mm dia GI Socket |
| 104 | 32mm dia GI Union |
| 105 | 32mm X 5ft GI Short Piece |
| 106 | 32mm X 6\\" long Nipple |
| 107 | 32mm X 25mm GI reducer |
| 108 | Supplying all materials, labour and T&P and fixing to walls, ceiling and floor unplasticized PVC pipes conforming to ASTM-D-1785/89 [Sch-80] and pipe fittings of the following nominal diameter with clamps including aking good the wall, ceiling and floor all |
| 109 | Recessed wiring to light point/fan point/ call bell point with 1.5sq.mm FRLS PVC insulatec copper conducter of ISI marked Make-Finolex/Anchor/Polycab/Havells/Rr KABLE/KEI with 20mm dia HMS FRLS PVC conduct ISI marked Make-AKG/BEC/Precision /Norpak/Anchor/Kinjal 6A modular type (flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand(Myrius) /Panasonic (vision) and ceilling rose ISI markof modular type G.I box with metalic cover plate (both side) (flame retradant type) Make-Schneider(Zencelo)/legrand(Myrius) /Panasonic (vision) of suitable size, modular box with 1.5sq Mm FRLS PVCinsulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -charge . All the switches & sockets should be warrantied for a replacement peroid of 2 years against defects with necessary test report & warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. GROUP-A |
| 110 | GROUP-B |
| 111 | GROUP-C |
| 112 | Suplying , fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)((flame retradanttype)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision).(Maximum 02 nos point in one circuit), All the switches & sockets should bewarrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 113 | Brick work with Fly ash . Brick in Superstructure in cement mortar (1:6) having crushing strength not less than 75.00 kg/cm2 immering the bricks in water not less than six hour cost conveyance , royality royality , taxes of all materials, labour and T& P required for the work etc.complete as per direction of Enginner-in charge. |
| 114 | Reinforcement cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position comacting to specified design section curing for prper period with cost conveyance, royality, taxes of all materials, labour and T & P required for the work etc etc.complete and as per direction of Enginner-in Charge. |
| 115 | Supplying, fixing of Computer Board (3nos 10 Amp Modular Switch and Socket)with complete fitting (modular type)(Make-Legrand(myrius), Schneider (Zencelo), Panasonic (vision), Hagar (equievalant) or equievalant) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. |
| 116 | 2 nos single core 4 sq, mm copper wlre for phase and neutral and o1 no of singlecore 1.5 sq, mm copper wire for earth continuly conductor in 20 mm dla nonmetalic heavy duty condult.(PDB to PSB/ POWER POINT/AC POINT)(2X4+1X1.5) |
| 117 | 2 nos single core 6 sq, mm copper wire for phase and neutral and 01 no of singlecore 2, 5 sq. mm copper wire for earth continuty conductor In 25 mm dia nonmetalic heavy duty condult .(LFDB TO LBDB/UBDB)(2X6+1X2.5) |
| 118 | 1nos single core 1,5 sq, mm copper wlre for phase copper wlre for phasecontinuty conductor In 20 mm dla non metallc heavy duty PVC condult (LDB toLSB/5A SOCKET) 1 × 1.5 sq. mm(for inverter wlring) |
| 119 | Supply and fxing CALL bell(Ding dong type) /Buzzer on the exlsting switchbox/cover,.Make- Havells/Anchor , A catagory ISI marked as approved , asrequIred as per direction of Engg.-In-Charge.All the Components should bewarantied for a replacement period of 2 years agalnst defects with ncessary test report & Wamaty certificate to be submitted to the department for genuinity of product & to avall free aftersales service within waranty perlod for acceptance of materials, |
| 120 | Is/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equlevalantreputed make A catagory ISI marked as approved )of ISI marked conforming to IS1258/1987 In place of cellng rose as per directlon of Engg.-in-Charge All the12Components should be warrantled for a replacement period of 2 years against defects with ncessary test report & Warnaty certicate to be submilted to the department for genulnity of product & to avail free aftersales service within waranty perlod for acceptance of materials |
| 121 | SITC of energy efflcent LED tube light fitings with decoratve alluminlum battenland LED tube llight having power rating not more than 20 watt and lumen output13not less than 2000 lumen complete with electronlc driver and all other accessorleswith dliffuser having 2 years warranty I/c connection etc as required as perdirection of Engg.-In-Charge. (Make: Panasonlc/LT/Havells /Phillps/Wipro/Crompton/Bafa)), The luminalre should be Replacement Warranty will be 2 years |
| 122 | SITC of 120 Watt Led Street LIghting Fixture, BIS certifed - hilgh pressure dle cast aluminlum body with a flat toughened glass protector (IKO7), with a detachable aluminium die cast control gear cover, top cover deslgned for tool free openingand doslng, separate optical and control gear compartments (IP66), Iindividualcompartment for LED & Driver, sultable for both horlzontal and vertical mountingfor 60mm dla plpe with an adjustable bracket (In step of 2.5 degree) from-20degree to +15degree, automatic electrlcal disconnection on opening of control gear compartment, a splrit level Indicator wlth respect to the horlzontal plane, a vent pressure equallzation unlt and pre-cabled, overall system efficlengy of120lm/W at CCT 5700K, CRI> 70, L70 50000 hrs, Electrical Class l, rated voltage240Vac, Power Factor > 0. 95 with BIS certfied potted driver having Internal surge protection of 4/4 KV and an addtional surge protection device of 10/10 KV.LED Streetllght must having warrantled for a perlod of 5 years, Make:Panasonlc/ipro /Jaquar/ Crompton/LT/eq make |
| 123 | DBsSupply and fixlng of 8 way DD sIngle pole and neutral sheet steel MCBIdistribution board 250V on surface/recess complete with tinned copper bus bar, Ineutral bus bar, earth bar, din bar, detachable gland plate, Interconnections, phosphatized and powder painted induding earthiIng etc, as requlred (but with out MCB/ RCCB/ Isolator) Warranty on DB Is 3 years |
| 124 | Supplying and fxing 6-32 Amps rating, C series, 10KA breaking capacity, SP, 230volts, MCB. Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ C&S in the existing MCB DB complete with connections, testing and commilssioning etc, as Irequired as per direction of Engg.-in-Charge... The MCB should be Replacement Warranty will be 3 years. |
| 125 | Supplying and fixing 32 amps rating, 240 volts, C series, 10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 19/c&S in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years, |
| 126 | Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting land complete with HRC Fuse links, interconnections, earthing, etc, as required as per direction of Engineer in Charge. (Make- HPL/ Anchor/ L&T/Havells) |
| 127 | Earthing.Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked lindluding accessories and providing masonary encdosure with cover plate having locking arrangement and watering pipe etc, with charcoal and salt as required |
| 128 | Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing asrequired. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender