Tender For Provision Of Fire Fighting System And Extinguisher At Oav, Nuagaon Under Nayagarh District Buildings.
Tender Value
4.19 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
8 days left
EMD
4194
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nayagarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Fire Fighting System And Extinguisher At Oav, Nuagaon Under Nayagarh District Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, installing, testing and commissioning of electrical motor driven Booster pump of Monoblock type capable to deliver 900LPM at 35MWC.The pump shall be coupled to TEFC motor of suitable HP with speed of 2900RPM and complete set shall mounted on common base frame. (MAKE-WILO/KIRLOSKAR/KSB/EQUIVALENT AS PER DIRECTION OF e.i.c.) |
| 2 | Providing and fixing Control Panel for Fire pumps. dust and vermin proof motor control panel fabricated from 14 SWG MS sheet with stove enamelled paint and comprising of: (for Fire Booster pump automatic operation ).FABRICATED - CPRI APPROVED |
| 3 | SITC of stainless steel hydrant valve/landing valve 63mm NB, single haded oblique type, as per direction of engg- in - charge |
| 4 | SITC of SS short branch pipe with 63mm male inlet and 19 mm outlet nozzole as per IS:903 |
| 5 | SITC of 63mm NB and 15 meter long RRL Fire Hose fittedwith 2 no. s of 63mm instantaneous stsinless steel male and female SS coupling complete by GI wire binding for intrnal hydrant as perdirection of engg- in- charge |
| 6 | Providing supply and fixing of MS Hose box of suitable size ( 750*600*250)mm to accommodate 2 nos of 15/1 no of mtr long Fire Hose and a branch pipe, all mounted type |
| 7 | SITC Of swinging pattern wall fitted first aid hose reel made from MS Sheet and water ways and moving parts with rubber hose of 20mm dia and 30 mtr long with ABS (Plastic) shut-off nozzole as per engg- in- charge |
| 8 | Providing and fitting and fixing of C.I. 25 MM SINGLE AIR RELIEF VALVE WITH STOP COCK CONFIRMING To is: 14845/2000 with ISI marks for water works purpose including fixing the same with hydrant riser including testing and commissioning the sysyem etc. all complete as per approved specification and direction of in charge |
| 9 | Providing and fitting and fixing of 4 way GM fire bridge connection consisting of 63 mm dia instantaneous type male coupling with built in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing and commissioning the system etc. all complete as per specification |
| 10 | SITC of C Class heavy duty MS Pipe (as per IS:1239 UPTO 150mm NB and IS:3589 for above150 mm 6 mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanised nuts and bolts on following size on surface along wall/shaft with MS Bracket, suspended from ceiling or beam with suspenders duly painted with two coats of primer and finished with enamelled paint of approved colour laid through pipe or in trench after wrapping with hassian cloth after applying coal tar primer as required as per direction of engg- in charge100mm NB |
| 11 | 65mm NB |
| 12 | Providing, fitting and fixing of following sizecast iron double flanged type dual plate NRV as per 15:5312 Part 1 2004 with iS Mark of pressure rating PN 1.60 Including fixing the same with supply of required jointig materials like flanges rubber insertions MS nuts and bolts, paint etc. and testing the jioints with required water pressure etc. all complete as per specification and direction of engg-in- charge |
| 13 | Providing, fixing testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type butterfly valves with EPDM Iron disc as per 1S:13095 Having pressure rating PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion MS nuts and bolts paint etc.. and testing the joints with required water pressure etc... all complete as per specification and direction of engg-in-charge100mm NB |
| 14 | 80mm NB |
| 15 | SITC of pressure gauge of 0-16 k.g.f/ sq. cm range with cut off bronze ball valve of suitable size with all accessories as per direction of engg- in - charge |
| 16 | SITC of pressure switch with cut off bronze ball valve with integral strainer and flare nut (mixed ends) of suitable size with all accessories as per direction of EIC |
| 17 | Illuminated Signage |
| 18 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in chargeOn the roof of First floor 10000litre capacity water storage tanks ( Sintex / Supreeme make ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender