Tender For Improvement To Trilochanpur-Gadakujanga Saline Embankment From Balithutha Bridge To Govindpur.
Tender Value
3.67 Crore
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
3.68 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jagatsinghapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Trilochanpur-Gadakujanga Saline Embankment From Balithutha Bridge To Govindpur.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm & removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material away from the work site including hire and running charges of all the machineries, T & P, cost of labour, cess etc. complete as per specification and direction of the Engineer-in-Charge. |
| 2 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works with all leads, lifts and delifts including labours, cost, conveyance, royalty, EMF, DMF & additional charges, cess & all other taxes as applicable, T&P materials required for the work, hire and running charges of machineries etc. complete as per specification and direction of the Engineer-in-Charge. |
| 3 | Providing and applying primer coat with bitumen emulsion (slow setting) on prepared surface of granular base including clearing of road surface and spraying primer @0.60 kg/sqm using mechanical means as per Clause 502 of MoSRT&H Specifications for Road & Bridge works (4th Revision) with all leads, lifts and delifts including labours, cost, conveyance, cess & all other taxes as applicable, T&P materials required for the work, hire and running charges of machineries etc. complete as per specification and direction of the Engineer-in-Charge. |
| 4 | Providing and applying tack coat with bitumen emulsion (Rapid setting) using emulsion pressure distributor @0.20Kg/Sqm on the prepared bituminous /granular surface cleaned with mechanical broom as per clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision) with all leads, lifts and delifts including labours, cost, conveyance, cess & all other taxes as applicable, T&P materials required for the work, hire and running charges of machineries etc. complete as per specification and direction of the Engineer-in-Charge. |
| 5 | Providing and laying bituminous macadam with hot mix plant using crushed aggregate of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 504 as per MoSRT&H Specification for Road & Bridge works (4th Revision) including labours, cost, conveyance, cess, royalty, EMF, DMF & additional charges & all other taxes as applicable, T&P materials required for the work, hire and running charges of machineries etc. complete as per specification and direction of the Engineer-in-Charge. (Grade-II 19mm Nominal size). |
| 6 | Providing and laying Semi Dense Bituminous Concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H Specification for Road & Bridge works (4th Revision) including labours, cost, conveyance, cess, royalty, EMF, DMF & additional charges & all other taxes as applicable, T&P materials required for the work, hire and running charges of machineries etc. complete as per specification and direction of the Engineer-in-Charge. (Grade-II 10mm Nominal size). |
| 7 | Earth work in approved type of soil in borrow area by mechanical means and loading into transportation vehicle and transportation of earth by mechanical means and unloading the earth over the approved surface of the embankment in proper profile with all leads, lifts, delifts including rough dressing and breaking the clods in to 5cm to 7cm size including removal of all foreign materials, debrises, grass, bushes, vegetations, shrubs, roots from transported earth including laying in layers not exceeding 22.50cm in depth including watering earth work up to OMC condition and compaction by vibrating roller and dozer in layers not exceeding 22.5 cm to 95% dry density including hire and running charges of all machineries, construction and maintenance of haul road, T&P, cost of fuel, lubricants, cost of labour, carriage, royalty, EMF, DMF & additional charges, cess & all other taxes as applicable etc. all complete as per specification and direction of the Engineer-in-charge (Measurement to be taken on the finished compacted level section of the fill under OMC condition and earth to be arranged by the contractor at his own cost and responsibility) |
| 8 | Collecting & supplying good quality moorum from approved quarry and stacking at work site and spreading the same flank of the road not exceeding 50 mm thick including watering & consolidation with PRR with all leads, lifts and delifts including labours, cost, conveyance, royalty, cess, EMF, DMF & additional charges & all other taxes as applicable including hire charges of T&P materials required for the work, hire and running charges of machineries etc. complete as per specification and direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender