Tender For Construction Of 100 Seated Girls Hostel At Sunabeda Womens Degree College Building Dist-Koraput For The Project Sanctioned For The Financial Year 2024 25.
Tender Value
2.59 Crore
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
2.65 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 100 Seated Girls Hostel At Sunabeda Womens Degree College Building Dist-Koraput For The Project Sanctioned For The Financial Year 2024 25.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work - Earth work in excavation of foundation of structures in all types of soil as per drawing and technical specification, including setting out, shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom to required level and line, backfilling the excavated earth to the extent required including compaction and utilising the remaining earth locally for road work including all Cost, Conveyance, royalties of all materials, labour, T and P, cess and machinaries required for the work etc. complete as per direction of the Engineer-In-Charge. (Ground Floor) |
| 2 | Filling foundation trenches and plinth with excavated earth including laying the earth in layer not exceeding 23.5 cm (9 ) thick layers including watering ramming etc.,complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). (Ground Floor) |
| 3 | Excavation loading , unloading and carriage by mechnical means of all kinds of soil including stoney earth, gravel and moorum etc., with all lifts and lead cuting and ladoing in tippers including trimming of stopes and bed to design section and deposting the excavated materials away from work site as per the specification and direction of Engineer-in-Charge. (Ground Floor) |
| 4 | Supplying and filling in foundation and plinth with sand including watering ramming, complete with all leads and lifts including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground Floor) |
| 5 | Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T and P, etc all complete as per the direction of Engineer-in-Charge. (The payment shall be made on the basis of actual plinth area of the building at (Ground floor) |
| 6 | Plain Cement concrete of proportion (1:3:6) using 40mm size C.B.H.G. metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required; ramming, watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground Floor) |
| 7 | R.C.C. work in M-20 using 20mm using size CB chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering and curing for four weeks, centering, shuttering and finishing exposed surface smooth including all cost, conveyance, cess and royalities, of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge (a) Raft, Column, Pedastal, Footing etc. |
| 8 | Plinth Beam (Ground floor) |
| 9 | Column superstructure (Ground floor) |
| 10 | First floor |
| 11 | Head Room |
| 12 | Roof beam (Ground floor) |
| 13 | First floor |
| 14 | Roof slab (Ground floor) |
| 15 | First floor |
| 16 | RCC Chajja (Ground floor) |
| 17 | First floor |
| 18 | Head Room |
| 19 | Shelve (Ground floor) |
| 20 | First floor |
| 21 | Lintel (Ground floor) |
| 22 | First floor |
| 23 | Head Room |
| 24 | Staircase (Ground floor) |
| 25 | First floor |
| 26 | Straightening bent up or coiled rods cutting, bending, craking, hooking, welding or jointing (if required) the M. S. rods or Tor steel and binding wires and binding tying the grills hoisting, lowering and placing in proper position as required for RCC works and for providing cost, conveyance of M. S. rods or Tor steel and binding wires of 18 to 20 gauge and labour and cess with all T and P required for the work etc., complete in all floors (weight of binding wires will not be considered for payment and payment will be made on weight of M. S. rods or Tor steel only) as per direction of the Engineer-in-Charge. (Ground floor) |
| 27 | First floor |
| 28 | Head Room |
| 29 | Flyash brick masonary in C.M.(1:6) in Foundation and Plinth using 9 size flyash bricks including splays cutting, circular moulding, champering and corbelling, watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 30 | Flyash brick masonary in C.M.(1:6) in superstructure using 9 size flyash bricks including splays cutting, circular moulding, champering and corbelling, watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 31 | First floor |
| 32 | Head Room |
| 33 | Flyash brick masonary in C.M.(1:4) in superstructure using 9 size flyash bricks including splays cutting, circular moulding, champering and corbelling, watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground Floor) |
| 34 | First floor |
| 35 | 6mm thick cement plaster in C.M.(1:4) to RCC surface finished smooth including closed deep chipping and chiselling and slurry treatment including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 36 | First floor |
| 37 | 12mm thick cement plaster in C.M. (1:6) over brick work finished smooth after raking out joints including watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground Floor) |
| 38 | First floor |
| 39 | Head Room |
| 40 | 16mm thick cement plaster in C.M. (1:6) over brick work finished smooth after raking out joints including watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 41 | First floor |
| 42 | Head Room |
| 43 | Supplying, fitting , fixing of Granite tiles of approved dimension area above 0.4 Sqm (20mm thick) in dado on 20 mm thick bed of cement mortar 1:4(1cement: 4 Sand ) jointed with neat cement slurry mixed with pigments to match the shades or the tiles including rubbing and polishing etc.,cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 44 | Supplying, fitting, fixing of Vetrified tiles of size 600mmX600mm of approved make the conforming to IS:13755 laid on 20mm thick cement of mortar (1:4) and filling joints with white cement of approved quality including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 45 | First floor |
| 46 | Supplying, fitting and fixing of tiles in dadoes skirting and risers on 12mm thick C.M. (1:3) joined with neat cement slurry mixed with pig ment to match the shade of the tile including rubbing polishing complete with cost, conveyance, cess royaltieis, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 47 | First floor |
| 48 | Supplying, fitting and fixing of tiles in floors, treads, steps and landings on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) joined with neat cement slurry mixed with pigment to match the shade of the tile including rubbing polishing complete with cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 49 | Cement Concrete (1:2:4) using 12mm size H. G. chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Ground floor) |
| 50 | Finishing wall surface of wall with acyclic wall putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staing wherever necessary with cost, conveyance, cess and royalities of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-Charge. (Ground floor) |
| 51 | First floor |
| 52 | Wall painting two coats with plastic emulsion paint of approved shade on new work including cost, conveyance, cess and royalities of all materials with labour and T and P etc., required for the work complete and as per direction of the Engineer-in-Charge. (Ground floor) |
| 53 | First floor |
| 54 | Head Room |
| 55 | Providing weather coat two coats over a coat of wall primer to outside wall surface with approved shade including cost, conveyance, cess and royalities of all materials with cost of indigo, blue with labour and T and P required for the work etc., completein all respect as per direction of Engineer-in-Charge. (Ground floor) |
| 56 | First floor |
| 57 | Head Room |
| 58 | Supplying, fitting fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T and P etc. required for the complete in all respect. (Ground Floor) |
| 59 | First floor |
| 60 | Providing and fixing of 30mm thick TATA plain door shutter with hinges , tower bolt handle stainless screws etc including the cost of all materials hardware fittings cost of all labour conveyance, taxes loading unloading T and P etc complete as per the direction of Engineer-in-Charge. (The Rate of all Tata door has been approved in M.P.H Building) (Ground floor) Door (2.00 x 2.40) |
| 61 | First floor |
| 62 | Door (1.00 x 2.40) (Ground floor) |
| 63 | First floor |
| 64 | Door (0.90 x 2.10) (Ground floor) |
| 65 | Door (0.75 x 2.10) (Ground floor) |
| 66 | First floor |
| 67 | Supplying and fitting fixing of Unplasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Three Track Two Panel sliding window 60 Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638 14,EN 477 95 and other applicable codes and standards. (Ground Floor) |
| 68 | First floor |
| 69 | Supplying and fitting-fixing of Unplasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/Top Hung 60 Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the door sash shall be fitted with 6mm thick clear toughened glass of SAINT GOBIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638 14,EN 477 95 and other applicable codes and standards. (Ground Floor) |
| 70 | First floor |
| 71 | Supplying, fitting, fixing in all fabricated of M.S. iron door, gate and windows in proper position including making hole to walls or RCC structure and making good to the dmages to walls or RCC structure including cost of all materials and labour , T and P, etc., complete in all respect as per specification and direction of the Engineer-in-Charge. (Ground Floor) |
| 72 | First floor |
| 73 | Head Room |
| 74 | Painting two coats with any approved enamel paint over a coat of primer to doors and windows including cost of paint, sand papering, polishing the surface including cost, conveyance, cess and royalities of all materials with labour and T and P etc., required for the work complete and as per direction of the Engineer-in-Charge. (Ground floor) |
| 75 | First floor |
| 76 | Head Room |
| 77 | 2.5cm (1 ) thick grading concrete in (1:2:2) using 6mm size C. B. H. G. chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering and curing etc., complete including cost, conveyance, cess and royalities, DMF, EMF, additional charges of all materials with labour and T and P required for the work complete and as per direction of Engineer-in-charge. (First floor) |
| 78 | Supplying, fitting, fixing of fabricated of M.S. angle for roof purlin in proper position including making holes to walls or RCC structure and making good to the damages to walls or RCC structure including cost, conveyance, cess and royalities of all materials with all labour and T and P required for the work complete and as per direction of the Engineer-in-Charge. (Head Room) |
| 79 | Supplying, fitting and fixing of durashine (TATA) sheet in roofing including fixing of wind ties, J. Hooks, G.I. or limpet washers with bolts and nuts drilling in wing ties with all T and P etc., complete including cost, conveyance, cess and royalities of all materials with all labour and T and P required for the work complete and as per direction of Engineer-in-charge. (Head Room) |
| 80 | Earth work in excavation in all kinds of soil for road works with hydraulic excavator of 0.9 Cum bucket capacity including cutting and loading in tippers as per drawing and technical specification, including setting out, dressing of section to correct line, level, grade and camber for road work or dressing of sides and bottom for foundation of structures and loading into tippers, transporting to embankment site within all lifts and lead upto 1000mtr. and utilising the surplus earth locally for road work wherever required, backfilling the excavation earth to the extent required etc complete in all respect as per clause 301 and 304 of Specification for road and bridge work of MORT and H (5th Revision) and Direction of Engineer in charge. |
| 81 | Scarifying the existing bituminous road surface to a depth of 50 mm by mechanical means and disposal of scarified material within initial lifts and lead upto 1000 mtr. away from the work site including cost of all labour, T and P and cess etc complete as per the direction of the Engineer-In-Charge. |
| 82 | E. I Work- Recessed wiring to Light points/fan points/ Exhaust fan/ Call bell in 20mm dia non-metalic flexible Polythine conduit, confir-ming to IS-6946/1973 with 1.5mm² 1.1KV in-sulated, S.C.multistrand HR FR copper wire of ISI marked, confirming to IS-694/1990 and earth continuity in 1.5mm² S/C. Multistrand Cu. wire with Modular switch board of size 150 mmx 200mmx62mm made of 1.22mm thick G.I. Modular Box including provn. of earth screw, painted with one coat of DA grey enamel paint confirming to IS-5133 Part-I 1969 with 3mm thick Modular front cover fixed with steel screw including supply and fixing of 5A.,250V.,Modular switch of ISI marked, confirming to IS-3854/1997 and ceiling rose of ISI marked confirming to IS-371/1999 mounted on C.I. circular box having front Modular cover complete with all accessories and connections. as per direction of Engineer-in-charge. (Make of wire-Finolex/ Anchor/ Havels/V-guard/Polycab/KEI) GROUND FLOOR- Group-A |
| 83 | Group-B. |
| 84 | Group-C. |
| 85 | FIRST FLOOR: Group-A |
| 86 | Group-B. |
| 87 | Group-C. |
| 88 | TERRACE FLOOR Group-B. |
| 89 | Group-C. |
| 90 | Recessed wiring for light / power plug with 2 x 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm FRLS/HFFR PVC insulated single core multistrand copper conductor for loop earthing as required.( Make of wire:-Finolex/Anchor/ Polycab/ HAVELLS/ RR KABLE/KEI ) GROUND FLOOR: |
| 91 | FIRST FLOOR: |
| 92 | Supplying and fixing of 3Pin, 5Amps. Socket outlet with 6A. Piano type Switch of ISI marked on the existing MS box, MS Plates and 6A. Modular Switch with Modular Socket including all connections etc. as required. (Rs.121.00+125.00=246.00) GROUND FLOOR: |
| 93 | FIRST FLOOR: |
| 94 | Supplying and fixing of Power Plug points with G.I. box of 4 Module Box with 4 Module Plate (nominal size) on surface or in recess with providing and fixing of 3Pin 15/16Amps. modular Socket outlet and 15/16A. Modular switch, connection, painting etc. as required. (for light plugs to be used in non-residential buildings) GROUND FLOOR: |
| 95 | FIRST FLOOR: |
| 96 | Recessed wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with FR PVC insulated single core multistrand copper conductor as earth wire as equired.( Make of wire:-Finolex/Anchor/ Polycab/HAVELLS/RR KABLE/KEI ) GROUND FLOOR: 1 x 1.5 sq. mm |
| 97 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 98 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 99 | 2 x 4 sq.mm + 1 x 1.5 sq.mm |
| 100 | FIRST FLOOR: 1 x 1.5 sq. mm |
| 101 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 102 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 103 | 2 x 4 sq.mm + 1 x 1.5 sq.mm |
| 104 | TERRACE FLOOR 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 105 | 2 x 2.5 sq.mm + 1 x 1.5 sq.mm |
| 106 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required. GROUND FLOOR: |
| 107 | FIRST FLOOR: |
| 108 | Supplying and fixing 15 watt LED bulb and connection etc. as required. GROUND FLOOR: |
| 109 | FIRST FLOOR: |
| 110 | Supplying and fixing on Surface/wall mounted type 10 watt bulk head LED light fitting complete with all accessories as required. GROUND FLOOR: |
| 111 | GROUND FLOOR: |
| 112 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) GROUND FLOOR: 8 way SPN double door |
| 113 | FIRST FLOOR: 8 way SPN double door |
| 114 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. 32A. DP MCB with Enclosure of Havels/Std. make. TERRACE FLOOR |
| 115 | Supply and fixing of following rating four pole (three poles and neutral) 415 V residual current break (RCCB) having a sensitivity current up to 30 mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. 40A D.P. M.C.B. GROUND FLOOR: |
| 116 | FIRST FLOOR: |
| 117 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6-32A. Single pole MCB GROUND FLOOR: |
| 118 | FIRST FLOOR: |
| 119 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro / Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years . GROUND FLOOR: |
| 120 | FIRST FLOOR: |
| 121 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-equivalent higher model with 3 star (deco,high speed) rated of Orient/Havells/ almonard/Panasonic/Usha or equivalent reputed make and model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge) GROUND FLOOR: |
| 122 | FIRST FLOOR: |
| 123 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider (Zencelo)/legrand( Myrius-NEXT GEN)/ Panasonic (vision) GROUND FLOOR: |
| 124 | FIRST FLOOR: |
| 125 | S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving and environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/ Bajaj) (5Years Warranty) GROUND FLOOR: |
| 126 | S/F of Street light- 45W,120 lm/w efficacy ,IP PC Lens new generation energy saving and environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/ Bajaj) (5Years Warranty) TERRACE FLOOR: |
| 127 | Supplying, installation, of exhaust fan of heavy duty 300 mm with Iron Zalli (Make- Havells/Crompton/ Usha/Orient/ Bajaj ) of Ventilator/ exhaust fan in the existing wall, including fixing and conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. GROUND FLOOR: |
| 128 | FIRST FLOOR: |
| 129 | S/F. of 63A. Cubicle Panel board made out of 16SWG C.R.C.A. Sheet with powder coats and following items.(a) 63A. 36kA.Switch Disconnector of Siemens make.- 01 No. (b) 4Pole Cu. Bus Bar complete:- 01 nos. (c) 40A. D.P.MCB of Havels/L and T/ C and S/ Legrand make:-06Nos. (3) Digital Volt meter, Ammeter, RYB indicators, CT Coils, Selector Switch etc.:- 01 Set. (f)) The panel board is to wired with suitable size of Cu. strips which are to be taped with different colours and Cu. F.R. wire of different colours. (g) The panel board is to fitted with MS frame on floor with C.C. work and M.S.nuts and bolts. (GROUND FLOOR:) |
| 130 | Supply, Installation, Testing, and Commissioning of Main switches/Change over of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with Rewireable Fuse links,interconnections, earthing, etc. as required as per direction of Engineer in Charge. (FIRST FLOOR):63 Amp TPN |
| 131 | SITC of BUSBAR Distribution Board designed with copper Busbar (strip), which is used to distribute the 3 phase incoming supply with multiple outgoing connections of 3 phase or 1 phase. Features:-Ample Space for Wiring, 100% Neutral Rating,Step Wise Busbar Mounting,High Insulated DMC Material Support for Busbar Assembly,Tin Plated ETP Copper Busbar Standard:IS 61439-6,Color:RAL 7035 Semi Glossy,No. Of Ways:4 Way,Rated Voltage:-415 V AC,Ambient Temperature:-40 deg C etc. Make-SEIMENS/HPL/ ANCHOR/ L and T/ HAVELS/C and S/ RK (a) 63Amp. 4Way Bus Bar (For 1st Floor) |
| 132 | S/F. of Standard earthing confirming to IS-3043/1987 including S/F. of 38mm/40mm dia heavy duty G.I. pipe 3mtr long confirming to IS-1239/Part-I/1990. The pipe shall have 12mm dia perforated holes at 15cm interval centre to centre upto 2.5mtr height from the bottom to upper end threaded and fitted with 38mm/40 mm dia G.I. flange with Provision of holes for making connections of earth continuity wire, complete with masonary works, for earth pit chamber and S/F. of C.I. hinged top cover 30x30x1cm size. (but with out charcoal and salt ) as required GROUND FLOOR: |
| 133 | FIRST FLOOR: |
| 134 | Extra for using salt and charcoal for G.I or copper pipe earth elctrrode as required GROUND FLOOR: |
| 135 | FIRST FLOOR: |
| 136 | Supplying of following size PVC insulated and PVC sheathed / XLPE power Aluminium / Copper cable of 1.1 kV grade of etc. as required. 4 X 16 SQMM GROUND FLOOR: |
| 137 | FIRST FLOOR: |
| 138 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade on surface as required. excedding 25 sq.mm but not exceeding 120 sq.mm GROUND FLOOR: |
| 139 | FIRST FLOOR: |
| 140 | Supply,Installation,Testing and Commisioning of ISI marked (IS:2878) Fire Extinguisher ,Carbon di-oxide type capacity 4.5kg with all accessories (Ever safe/Fire shield/ Ceasefire/Safex/Flameklog)GROUND FLOOR: |
| 141 | FIRST FLOOR: |
| 142 | Supply, installation, testing and commissioning of 2300 VA pure sine wave inverter with 2 numbers 150Ah tubular batteries, including battery stand, DC cabling, AC input/output wiring, MCB/changeover switch, earthing, battery interlink cables, first-time charging, and all required accessories. All mounting, wiring, terminations, testing under load, and handing over documentation to be completed as per standard electrical practice and as instructed by the Engineer-in-Charge. (2500VA UPS= 16085/- + 150Ah. Tubular batteries-2nos.@ 19229/- = (Rs.16085.00+38458.00 =Rs.54543.00 GROUND FLOOR: |
| 143 | FIRST FLOOR: |
| 144 | EXTERNAL LIGHTING: Supply of 8Mtr. Long Galvanized Octagonal Pole having Top Dia 70mm, Bottom Dia 150mm, made out of 3.0mm Thickness Plate with in-built junction box arrangement, Base Plate. foundation Bolts and template including loading un-loading and transportation charges. |
| 145 | Supply of Standard Brackets (48.3 ODx3.2 ) of 500 Single Arm |
| 146 | Supply and Fixing of 90Wt. LED Street light fittings of Havels/Bajaj make.(Withouot GI bracket) |
| 147 | Construction of foundation with supply of all material such as steel, reinforcement, metal, chips, cement, sand, cable entry pipe, Shutering for RCC work (I.:1.4:8) with labour charges for construction including erection and commissioning of pole with arm to proper alignment including fitting of the lamp |
| 148 | Supply and laying of 3 Core 2.5mm² PVC Flat Submersible Cable of ISI marked.(Make-Havels/ Polycab) |
| 149 | Supply and installation of No -6 G.I wire Coil earthing with supply of all earthing materials such as charcoal, salt and other necessary eathing materials ,labour etc |
| 150 | Supplying of following size PVC insulated and PVC sheathed / XLPE power Aluminium / Copper cable of 1.1 kV grade of etc. as required. 2X6 SQMM |
| 151 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade on surface as required. not exceeding 25 sq.mm (Spacing between shaddles:0.25 mtr) |
| 152 | Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. (a) 32A. DP MCB with Enclosure of Havels/Std. make. |
| 153 | PH WORK-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 20mm dia C - PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast - SDR - 11) Ground Floor |
| 154 | First Floor |
| 155 | 25mm dia C - PVC pipe (Ashirbad/Supreme/Ori Plast - SDR - 11) Ground Floor |
| 156 | First Floor |
| 157 | 32mm dia C - PVC pipe (Ashirbad/Supreme/Ori Plast - SDR - 11) |
| 158 | 40mm dia C - PVC pipe (Ashirbad/Supreme/Ori Plast - SDR - 11) |
| 159 | Supplying all materials, labour T and P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(Jaquar make/ Hindwere Make/Parryware make) 15mm dia CP angle stop cock(FLR-ACR-5053N) |
| 160 | 15mm dia CP two way bib cock(FLR-CHR-5041N) |
| 161 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 162 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 163 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 164 | 25mm dia brass full way valve (Shakti make) |
| 165 | 32mm dia brass full way valve (Shakti make) |
| 166 | 40mm dia brass full way valve (Shakti make) |
| 167 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 168 | 15mm CP Extension piece |
| 169 | 125mm CP grating |
| 170 | 15mm size C.P. flange |
| 171 | Supplying all materials , labour, T and P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 1st floor |
| 172 | supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost and conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. Ground Floor |
| 173 | First Floor |
| 174 | Supplying all materials , labour, T and P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge Ground Floor |
| 175 | First Floor |
| 176 | Supplying all materials, labour, T and P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost and conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground Floor |
| 177 | First Floor |
| 178 | Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 179 | 110mm U-PVC P Trap(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 180 | 110mm U-PVC door bend(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 181 | 110mm U-PVC Plain bend(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 182 | 110mm U-PVC offset without ear(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 183 | 110mm U-PVC Cowl(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 184 | 110mm U-PVC S/Jn door(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 185 | 110mm U-PVC Plain tee(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 186 | 110mm U-PVC D/Jn door(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 187 | 110mm U-PVC Door tee(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 188 | 110mm U-PVC Socket(Supreme /Ashirvad/fInolex/Ori Plast Make) |
| 189 | Supplying all materials, labour, T and P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost and conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) European water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 190 | Supplying all materials, labour T and P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 191 | Supplying all materials, labour T and P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost and conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge(Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) Halfpedestal basin(560x450)Hindware No.91049+91115 |
| 192 | Under Counter Basin (560x450) Hindware No. 10095 |
| 193 | Supplying all materials, labour, T and P for fitting and fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap and P.V.C. waste pipe and painting brackets including supply of cement concrete and mortar etc. all complete. 24 x 18 x 10 sink (Jaquar make/ Plaza Make/ Cera make/ Hindwere Make) |
| 194 | Supplying all materials, labour, T and P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail |
| 195 | Towel ring |
| 196 | Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 197 | Supplying all materials, labour, T and P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type) |
| 198 | Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder |
| 199 | Supplying all materials labor T and P and Fitting and fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. ½ x 5 CP Shower (Plaza Deluxe Make) |
| 200 | Supplying all materials , labour, T and P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 201 | Supplying all materials , labour, T and P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 202 | Supplying all materials ,labour ,T and P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size 76cmx76cmx46cm with 18 dia RCC MH cover |
| 203 | Supplying all materials labour T and P filling sand in lavatories well watered and rammed including lead of materials to work site. 48.98 x 0.1 |
| 204 | Supplying all materials, labour, T and P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 48.98 x 0.10 |
| 205 | Supplying all materials, labour, T and P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge First Floor 43.2 x 0.10 |
| 206 | Supplying all materials, labour, T and P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 30cmx30cm Ground Floor |
| 207 | First Floor |
| 208 | Supplying all materials,labour,T and P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. Ground Floor |
| 209 | First Floor |
| 210 | Supplying all materials, labour, T and P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 45cmx30cm Ground Floor |
| 211 | First Floor |
| 212 | Granite Tiles 10mm thick - for Kitchen and Counter Basin |
| 213 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. of make Rajshri Plastiwood/ Alstone/Aramstrong or euivalant as per direction of Engineer-in-charge. |
| 214 | Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification. of make Rajshri Plastiwood/ Alstone/ Aramstrong or euivalant as per direction of Engineer-in-charge. |
| 215 | Supplying all materials, labour, T and P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge Aqua guard pure Chill 80 PSS UV |
| 216 | Ext. S/D PortionSupplying all materials, labour, T and P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge100mm dia P.V.C. pipe |
| 217 | Supplying all materials labor T and P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18 dia RCC Cover ) |
| 218 | Supplying all materials labour T and P and constructing soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. constructing 1.40m dia x 2.00 m deep soak way pit |
| 219 | 2 nos 30 Users Septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. |
| 220 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 221 | Supplying all materials, labour, T and P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 222 | Supplying all materials, labour, T and P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 223 | Supplying all materials, labour, T and P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 224 | Supplying all materials, labour, T and P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 225 | Supplying all materials, labour, T and P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge. RCC floor, roof slab chhaja up to 4.430 m height |
| 226 | Supplying all materials.labour.T and P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 227 | Supplying all materials,labour,T and P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 228 | Supplying all materials, labour, T and P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 229 | Supplying all materials labour T and P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 230 | Supplying all materials, labour T and P for providing fitting and fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 231 | Supplying all materials labor T and P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 232 | Construction of 1no production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only Drilling of 200mm dia bore 00 mtr to 30mtr |
| 233 | 30 mtr to 45mtr |
| 234 | Drilling of 150mm dia bore 45 mtr to 180.00mtr |
| 235 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes 00 mtr to 30 mtrs |
| 236 | 30 mtr to 45mtr |
| 237 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 200mm dia PVC (sch-80) pipe |
| 238 | Supplying all materials, labour, T and P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 239 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By DTH Rig |
| 240 | Supplying all materials, equipment, labour and conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey and selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: Rocky terrain with boulder formation for 300m depth |
| 241 | Supplying all materials, labour, T and P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 2HP single phase 3 stage vertical / horizontal submersible pump set at head range 20 to 35 meters discharge 145 to 110 LPM with outlet dia of 25mm |
| 242 | DOL Control panel |
| 243 | 40mm dia steel short piece |
| 244 | Well cap |
| 245 | 50mm size CI bracket |
| 246 | 2.50sqmm flat cable |
| 247 | 20mm dia rigid UPVC pipes |
| 248 | Steel rope with cover |
| 249 | Labour charges for lowering including transportation |
| 250 | Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender