Water Resources and Irrigation Government Departments Closing in 3 days TDR #58466942

Tender For Restoration Work Of Flood-2026 Damaged For Community Lift Irrigarion Projecs At Arimula_Tw_Aurangabad_Iv_Tw_Bhabanipur_Ii Tw_Deulipal_Rl_Janapur Pat_Tw Under Dharmasala Block In Jajpur District.

Issued by Government Departments · Jajapur, Odisha
Tender Value
8.44 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
8450
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jajapur → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Restoration Work Of Flood-2026 Damaged For Community Lift Irrigarion Projecs At Arimula_Tw_Aurangabad_Iv_Tw_Bhabanipur_Ii Tw_Deulipal_Rl_Janapur Pat_Tw Under Dharmasala Block In Jajpur District.

BOQ

Name of Work:- Restoration work of Flood-2026 damaged for community Lift Irrigarion projecs at Arimula_TW_Aurangabad_IV_TW_Bhabanipur_II TW_Deulipal_RL_Janapur Pat_TW Under Dharmasala Block in Jajpur District.
Sl. No. Item Description
1Arimula_TW_
2Earthwork in excavation of foundation in hard soil for stiff clay , stiff black cotton, hard red earth, shales, moorum ordinary gravels, including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. (Mechanical 60% & Manual 40%)
3Filling the foundation and plinth with the excavated material as directed by the Engineer-incharge.
4Distempering two coats to walls with Distemper of approved shade on new work to give an even shade exculding cost of Distemper. Per 1 Sqm. complete as per the direction of Engineer – in Charge
5Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
6Re-laying of 200 mm dia UPVC pipe including dismantling and re fitting as per the direction of the Engineer-incharge.
7Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies
87.5 HP/5.62 KW Energy efficiency Submersible pumpset of total head 25 mtr having 900 LPM discharge of reputed brand with BEE 3 Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm
9100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark.
10100mm dia G.I Bend (Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
11100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
12100mm dia G.I. Nipple (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
13100mm dia G.I.Socket (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
14Cost, supplying of M.S T/W Clamp (Pair) 100mm dia with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
15100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
1625 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark.
17Cost of 200 mm dia PVC Coupler
18Cost of 200 mm dia PVC end cap
19Automatic Star Delta starter sheet steel enclosure suitable for operation of squirrel cage Induction motor upto 10HP (8-13) with 16. Amp (AC-3) contactor at 415 volt +6%-15%, 3 phase, 50 Hz, AC supply with suitable overload relay & No volt coil with electric pnemutic timer suitable for operation at voltage range of 300-440 volt having dependable protection against overload and single phasing & should be of reputed brand of ISI specifications having wide dealership network for easy availability of spares including all cost, conveyance, cess etc complete but excluding cost of GST
206mm 2 sqm PVC insulated steel wire rope-ISI mark of reputed approved brand including all cost
21Electrical Earthing including all materials as per the direction of the Engineer-incharge.
2263 Amp Main Switch Triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to IS 4064 part I & with ISI mark.
233 x 10 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming.
244.0 mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST
25Cost of Sly wrench 10''- 1 nos,Screw driver-10''-01 nos, star Screw driver-01 nos, Cutting Pliers- 01 nos, hand gloves- 01 pairs, 4 amp fuse-20 gm, Black tap- 5 packet, Lock and key - 03 nos,7/20 mm copper wire,3/20 copper wire etc.
26Aurangabad_IV_TW
27Distempering two coats to walls with Distemper of approved shade on new work to give an even shade exculding cost of Distemper. Per 1 Sqm. complete as per the direction of Engineer – in Charge
28Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
29Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies
307.5 HP/5.62 KW Energy efficiency Submersible pumpset of total head 25 mtr having 900 LPM discharge of reputed brand with BEE 3 Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm
31100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark.
32100mm dia G.I Bend (Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
33100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
34100mm dia G.I. Nipple (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
35100mm dia G.I.Socket (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
36Cost, supplying of M.S T/W Clamp (Pair) 100mm dia with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
37100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
3825 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark.
39Cost of 200 mm dia PVC Coupler
40Cost of 200 mm dia PVC end cap
41Automatic Star Delta starter sheet steel enclosure suitable for operation of squirrel cage Induction motor upto 10HP (8-13) with 16. Amp (AC-3) contactor at 415 volt +6%-15%, 3 phase, 50 Hz, AC supply with suitable overload relay & No volt coil with electric pnemutic timer suitable for operation at voltage range of 300-440 volt having dependable protection against overload and single phasing & should be of reputed brand of ISI specifications having wide dealership network for easy availability of spares including all cost, conveyance, cess etc complete but excluding cost of GST
426mm 2 sqm PVC insulated steel wire rope-ISI mark of reputed approved brand including all cost
43Electrical Earthing including all materials as per the direction of the Engineer-incharge.
4463 Amp Main Switch Triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to IS 4064 part I & with ISI mark.
453 x 10 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming.
464.0 mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST
47Cost of Sly wrench 10''- 1 nos,Screw driver-10''-01 nos, star Screw driver-01 nos, Cutting Pliers- 01 nos, hand gloves- 01 pairs, 4 amp fuse-20 gm, Black tap- 5 packet, Lock and key - 03 nos,7/20 mm copper wire,3/20 copper wire etc.
48_Bhabanipur_II TW_
49Earthwork in excavation of foundation in hard soil for stiff clay , stiff black cotton, hard red earth, shales, moorum ordinary gravels, including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. (Mechanical 60% & Manual 40%)
50Filling the foundation and plinth with the excavated material as directed by the Engineer-incharge.
51Distempering two coats to walls with Distemper of approved shade on new work to give an even shade exculding cost of Distemper. Per 1 Sqm. complete as per the direction of Engineer – in Charge
52Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
53Re-laying of 200 mm dia UPVC pipe including dismantling and re fitting as per the direction of the Engineer-incharge.
54Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies
557.5 HP/5.62 KW Energy efficiency Submersible pumpset of total head 25 mtr having 900 LPM discharge of reputed brand with BEE 3 Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm
56Labour charges for installation of Pumpset including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, NR Valve, Foot Valve, Sluice Valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the Engineer-incharge.
57100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark.
58100mm dia G.I Bend (Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
59100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
60100mm dia G.I. Nipple (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
61100mm dia G.I.Socket (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
62Cost, supplying of M.S T/W Clamp (Pair) 100mm dia with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
63100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
6425 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark.
65Cost of 200 mm dia PVC Coupler
66Cost of 200 mm dia PVC end cap
67Automatic Star Delta starter sheet steel enclosure suitable for operation of squirrel cage Induction motor upto 10HP (8-13) with 16. Amp (AC-3) contactor at 415 volt +6%-15%, 3 phase, 50 Hz, AC supply with suitable overload relay & No volt coil with electric pnemutic timer suitable for operation at voltage range of 300-440 volt having dependable protection against overload and single phasing & should be of reputed brand of ISI specifications having wide dealership network for easy availability of spares including all cost, conveyance, cess etc complete but excluding cost of GST
686mm 2 sqm PVC insulated steel wire rope-ISI mark of reputed approved brand including all cost
69Electrical Earthing including all materials as per the direction of the Engineer-incharge.
7063 Amp Main Switch Triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to IS 4064 part I & with ISI mark.
713 x 10 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming.
724.0 mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST
73Cost of Sly wrench 10''- 1 nos,Screw driver-10''-01 nos, star Screw driver-01 nos, Cutting Pliers- 01 nos, hand gloves- 01 pairs, 4 amp fuse-20 gm, Black tap- 5 packet, Lock and key - 03 nos,7/20 mm copper wire,3/20 copper wire etc.
74Deulipal_RL
75Earthwork in excavation of foundation in hard soil for stiff clay , stiff black cotton, hard red earth, shales, moorum ordinary gravels, including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. (Mechanical 60% & Manual 40%)
76Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge.
77Cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge.
78Brick work with Fly ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge.
7912mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
80CC(1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge.
81Filling the foundation and plinth with the excavated material as directed by the Engineer-incharge.
82Distempering two coats to walls with Distemper of approved shade on new work to give an even shade exculding cost of Distemper. Per 1 Sqm. complete as per the direction of Engineer – in Charge
83Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
84Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies
85100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark.
86100mm dia G.I Bend (Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
87100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
88100mm dia G.I. Nipple (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
89100mm dia G.I.Socket (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
9010 HP/7.50 KW Energy efficiency Monoblock pump set of total head 18 mtrs having discharge 1700 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class 'F' insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC power supply suction/delivery = 100mmx100mm with BEE 3 Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all cost, conveyance, cess etc complete but excluding cost of GST
91Cost of Motor Base Plate
92Motor hood size (0.45mx0.45mx0.60m) made with 18 SWG (cold rolled M.S.Sheet with one coat of red oxide primer and two coats of smoke gray / navey blue enamel n both side (inside & outside) suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for attachement with the groves on rear side of the pannel board.
934.0 mm 2 PVC Single core Copper Wire
94100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including all cost, conveyance, cess etc complete but excluding cost of GST
95100x100x25mm G.I. Tee with Plug for priming
96100mm dia C.I. Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-1-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
9725 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark.
98Cost of 200 mm dia PVC Coupler
99Cost of 200 mm dia PVC end cap
100Automatic Star Delta starter sheet steel enclosure suitable for operation of squirrel cage Induction motor upto 10HP (8-13) with 16. Amp (AC-3) contactor at 415 volt +6%-15%, 3 phase, 50 Hz, AC supply with suitable overload relay & No volt coil with electric pnemutic timer suitable for operation at voltage range of 300-440 volt having dependable protection against overload and single phasing & should be of reputed brand of ISI specifications having wide dealership network for easy availability of spares including all cost, conveyance, cess etc complete but excluding cost of GST
101Electrical Earthing including all materials as per the direction of the Engineer-incharge.
10263 Amp Main Switch Triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to IS 4064 part I & with ISI mark.
1033 x 10 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming.
104Cost of Sly wrench 10''- 1 nos,Screw driver-10''-01 nos, star Screw driver-01 nos, Cutting Pliers- 01 nos, hand gloves- 01 pairs, 4 amp fuse-20 gm, Black tap- 5 packet, Lock and key - 03 nos,7/20 mm copper wire,3/20 copper wire etc.
105Janapur Pat_TW
106Distempering two coats to walls with Distemper of approved shade on new work to give an even shade exculding cost of Distemper. Per 1 Sqm. complete as per the direction of Engineer – in Charge
107Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
108Supplying of 200mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies
1097.5 HP/5.62 KW Energy efficiency Submersible pumpset of total head 25 mtr having 900 LPM discharge of reputed brand with BEE 3 Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamp & 30 mtr of 4.00 sqmm
110100 mm Ø nominal bore G.I. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to IS - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. The socket confirming to IS-1239 (pt-II/1992) with latest amendmewnts in random length of 4 to 7 mtrs. Each pipe should bear ISI certification & manufacturers name / Trade mark.
111100mm dia G.I Bend (Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
112100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
113100mm dia G.I. Nipple (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
114100mm dia G.I.Socket (Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
115Cost, supplying of M.S T/W Clamp (Pair) 100mm dia with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
116100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
11725 mm Ø Air release valve with saddle & Raiser pipe. The air release valve shall confirm to IS 14845 with ISI mark.
118Cost of 200 mm dia PVC Coupler
119Cost of 200 mm dia PVC end cap
120Automatic Star Delta starter sheet steel enclosure suitable for operation of squirrel cage Induction motor upto 10HP (8-13) with 16. Amp (AC-3) contactor at 415 volt +6%-15%, 3 phase, 50 Hz, AC supply with suitable overload relay & No volt coil with electric pnemutic timer suitable for operation at voltage range of 300-440 volt having dependable protection against overload and single phasing & should be of reputed brand of ISI specifications having wide dealership network for easy availability of spares including all cost, conveyance, cess etc complete but excluding cost of GST
1216mm 2 sqm PVC insulated steel wire rope-ISI mark of reputed approved brand including all cost
122Electrical Earthing including all materials as per the direction of the Engineer-incharge.
12363 Amp Main Switch Triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to IS 4064 part I & with ISI mark.
1243 x 10 sqmm Tarpodar cable XLPE (Cross link polyethylin) conforming to IS: 7098 (Part-II) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming.
1254.0 mm2 Submerssible (3 Core) Flat Cable ISI mark of reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST
126Cost of Sly wrench 10''- 1 nos,Screw driver-10''-01 nos, star Screw driver-01 nos, Cutting Pliers- 01 nos, hand gloves- 01 pairs, 4 amp fuse-20 gm, Black tap- 5 packet, Lock and key - 03 nos,7/20 mm copper wire,3/20 copper wire etc. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58466942
AUTHORITY Government Departments
TENDER VALUE 8.44 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Restoration Work Of Flood-2026 Damaged For Community Lift Irrigarion Projecs At Arimula_Tw_Aurangabad_Iv_Tw_Bhabanipur_Ii Tw_Deulipal_Rl_Janapur Pat_Tw Under Dharmasala Block In Jajpur District.
Basic Detail
Tender No OLIC_05_26_27
Bidding Type Tender
Location
City Jajapur
State Odisha
Key Dates
Publish Date 10 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 8.44 Lakhs
Tender Fee 4720
EMD 8450
Exemption Available
Document List
568201e3-2688-4508-a0e2-772ab39d4d46.html
BOQ_619707.xls
DTCN17.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

568201e3-2688-4508-a0e2-772ab39d4d46.html

xls

BOQ_619707.xls

pdf

DTCN17.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender