Tender For Construction Of Laboratory Building For Rwss Division, At Jagatsinghpur In The District Of Jagatsinghpur .
Tender Value
2.03 Crore
Estimated cost
Bid Submission
23 Nov 2026
8 days left
EMD
2.03 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jagatsinghapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Laboratory Building For Rwss Division, At Jagatsinghpur In The District Of Jagatsinghpur .
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation hard soil in foundation with initial lead and lift including rough dressing and breaking the clods to maximum 5cm to 7cm in size and laying the layers notexceeding 0.30m in depth as per specification and approved by the department. |
| 2 | Single under reamed pile foundation with RCC M25 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel. |
| 3 | Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. |
| 4 | Supplying Filling foundation and plinth (F&P) with sand well watered and rammed including all cost and complete finished in all respect as per direction of the Engineer-in-charge. |
| 5 | Cement concrete (1:3:6) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete as per direction of the Engineer-in-charge. |
| 6 | Brickwork with Fly Ash Bricks 25cmx12cmx8cm having crushing not less than 35kg/cm² in C.M (1:6) in Foundation and Plinth including cost of all and complete finished in all respect. |
| 7 | Brickwork with Fly Ash Bricks 25cmx12cmx8cm having crushing not less than 35kg/cm² in C.M (1:6) in Superstructure including cost of all and complete finished in all respect. |
| 8 | R.C.C. work of M-25 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. (a) RCC Footing |
| 9 | RCC Plinth Beam |
| 10 | RCC Column in Super Structure |
| 11 | RCC Wall Beams |
| 12 | RCC Lintel |
| 13 | RCC Roof Slab |
| 14 | RCC Stair case |
| 15 | Plinth Protection |
| 16 | Providing Straightening, cutting ,bending, binding HYSD Steel bars including cranking, hooking, welding or jointing the M.S coiled road or tor confirming to I.S 432 (Plain) and 1785 (Tor) steel and binding etc complete. (tata/sail/jindal) |
| 17 | Providing 16mm thick cement plaster (1:6) finished smooth to in side surface of 9\\" thick brick walls after out the joint including watering and curing for 7 days with cost,conveyance, royalities and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors.IN SIDE |
| 18 | Providing 12 mm thick Cement Plaster in (1:6) over brick work including cost, conveyance,royalities and taxes of all materials and labour with T&P required for the work etc.complete.OUT SIDE |
| 19 | Providing 6 mm thick Cement Plaster in (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge. |
| 20 | Supplying, fitting, fixing of chequred Tiles. flooring on 20mm thick bed of C.M. (1:4) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. (make of Johnson, Kajaria, Somany 2'x2' or 2'x4' size) |
| 21 | Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete. (make of Johnson, Kajaria, Somany 2'x2' or 2'x4' size) |
| 22 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. (Asian paint/ Berger) |
| 23 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Asian paint/ Berger) |
| 24 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.(Asian paint/ Berger) |
| 25 | Supplying and fitting fixing of Un-plasticised poly Vinyl Chloride UPVC (FENESTA/NCL VEKA LTD) casement window with top fixed - 60 series duly manufactured using UPVC reinforced profile of 60x55x2.5mm for outer frame , 75x60x2.25 mm for casement window sash profile and 74x60x2.5mm mulion profile capable of mounting single glazing system structurally reinforced with hot galvanised up to 50 mic of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughend glass of saint gobain make duly fixed with EPDM weathering seal resistant accessories etc complete conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standard |
| 26 | Supplying, fitting and fixing M.S. grill made out of M.S. flat confirming to IS-1977/1996 as per the design [email protected]/sqm (tata/sail/jindal) |
| 27 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge..(Asian paint/ Berger) |
| 28 | Supplying, fitting, fixing of stainless steel of 304 grade in Hand Railing/Grill etc using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification , buffing ,polishing etc. with cost conveyance taxes of all materials , labour , T&P required for completion of the work in all reapect as per the direction of the Engineer- in - charge. (Make of Jindal or Sail) |
| 29 | Providing fixing granite on steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles |
| 30 | First Floor Brickwork with Fly Ash Bricks 23cmx12cmx8cm having crushing not less than 35kg/cm² in C.M (1:6) in Superstructure including cost of all and complete finished in all respect. |
| 31 | Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in Superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. (Ref.:-A/R-2006,P-71, Item no-2) |
| 32 | R.C.C. work of M-25 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. RCC Column in Super Structure |
| 33 | RCC Wall Beams |
| 34 | RCC Lintel |
| 35 | RCC Chajja |
| 36 | RCC Roof Slab |
| 37 | RCC Stair case |
| 38 | Shelves 37.5mm |
| 39 | Providing Straightening, cutting ,bending, binding HYSD Steel bars including cranking, hooking, welding or jointing the M.S coiled road or tor confirming to I.S 432 (Plain) and 1785 (Tor) steel and binding etc complete. (tata/sail/jindal) |
| 40 | Providing 16mm thick cement plaster (1:6) finished smooth to in side surface of 9\\" thick brick walls after out the joint including watering and curing for 7 days with cost,conveyance, royalities and taxes of all materials and labour with T&P required for the work etc. IN SIDE complete in all respect in all floors. |
| 41 | Providing 12 mm thick Cement Plaster in (1:6) over brick work including cost, conveyance,royalities and taxes of all materials and labour with T&P required for the work etc.complete. OUT SIDE |
| 42 | Providing 6 mm thick Cement Plaster in (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge. |
| 43 | Supplying, fitting, fixing of Vitrified tile flooring on 20mm thick bed of C.M. (1:4) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. (make of Johnson, Kajaria, Somany 2'x2' or 2'x4' size) |
| 44 | Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete. (make of Johnson, Kajaria, Somany 2'x2' or 2'x4' size) |
| 45 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. (Asian paint/ Berger) |
| 46 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Asian paint/ Berger) |
| 47 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.(Asian paint/ Berger) |
| 48 | Supplying and fitting fixing of Un-plasticised poly Vinyl Chloride UPVC (FENESTA/NCL VEKA LTD) casement window with top fixed - 60 series duly manufactured using UPVC reinforced profile of 60x55x2.5mm for outer frame , 75x60x2.25 mm for casement window sash profile and 74x60x2.5mm mulion profile capable of mounting single glazing system structurally reinforced with hot galvanised up to 50 mic of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughend glass of saint gobain make duly fixed with EPDM weathering seal resistant accessories etc complete conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standard |
| 49 | Supplying, fitting and fixing M.S. grill made out of M.S. flat confirming to IS-1977/1996 as per the design [email protected]/sqm (tata/sail/jindal) |
| 50 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge..(Asian paint/ Berger) |
| 51 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete |
| 52 | Supplying, fitting, fixing of dressed seasoned sal wood choukath including cost, conveyance and all taxes of materials and labour (T&P) required for the work etc. complete as per direction of Engineer-in-Charge. |
| 53 | Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials. |
| 54 | Providing fitting, fixing of Al. door with anodized Al. door section No. 9202 as vertical member, 9201 as top member and 9200 as bottom and middle & top member andand 12mm thick pre-laminated board on bottom and the frame to be completed bymeans of jointing angle No. 1855 including all cost of labour, T&P , hire charges ofdrilling machine, labour charges etc. complete. |
| 55 | Supplying, fitting, fixing of stainless steel of 304 grade in Hand Railing/Grill etc using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification , buffing ,polishing etc. with cost conveyance taxes of all materials , labour , T&P required for completion of the work in all reapect as per the direction of the Engineer- in - charge. (Make of Jindal or Sail) |
| 56 | Providing fixing granite on steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles |
| 57 | Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over |
| 58 | Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures. all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over |
| 59 | Providing fitting, fixing up library book shelvs with 19mm thick BWR ply wood including cost of all materials, all lebour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.(ply make of Marino, Greenlam) |
| 60 | Providing fitting, fixing up laboratory table with 19 mm thick BWR ply wood including cost of all materials, all lebour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. (ply make of Marino, Greenlam) |
| 61 | Providing fitting, fixing up windows blinds including cost of all materials, all lebour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 62 | Providing fitting, fixing of PVC door with choukath, frame etc complete including cost of labour, T&P , hire charges ofdrilling machine, labour charges etc. complete. |
| 63 | Second Floor Brickwork with Fly Ash Bricks 23cmx12cmx8cm having crushing not less than 35kg/cm² in C.M (1:6) in Superstructure including cost of all and complete finished in all respect. |
| 64 | Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in Superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. (Ref.:-A/R-2006,P-71, Item no-2) |
| 65 | R.C.C. work of M-25 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. RCC Column in Super Structure |
| 66 | RCC Wall Beams |
| 67 | RCC Lintel |
| 68 | RCC Chajja |
| 69 | RCC Roof Slab |
| 70 | RCC Stair case |
| 71 | Shelves 37.5mm |
| 72 | Providing Straightening, cutting ,bending, binding HYSD Steel bars including cranking, hooking, welding or jointing the M.S coiled road or tor confirming to I.S 432 (Plain) and 1785 (Tor) steel and binding etc complete. (tata/sail/jindal) |
| 73 | Providing 16mm thick cement plaster (1:6) finished smooth to in side surface of 9\\" thick brick walls after out the joint including watering and curing for 7 days with cost,conveyance, royalities and taxes of all materials and labour with T&P required for the work etc. IN SIDE complete in all respect in all floors. |
| 74 | Providing 12 mm thick Cement Plaster in (1:6) over brick work including cost, conveyance,royalities and taxes of all materials and labour with T&P required for the work etc.complete. OUT SIDE |
| 75 | Providing 6 mm thick Cement Plaster in (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge. |
| 76 | Supplying, fitting, fixing of Vitrified tile flooring on 20mm thick bed of C.M. (1:4) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. (make of Johnson, Kajaria, Somany 2'x2' or 2'x4' size) |
| 77 | Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete. (make of Johnson, Kajaria, Somany 2'x2' or 2'x4' size) |
| 78 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. (Asian paint/ Berger) |
| 79 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Asian paint/ Berger) |
| 80 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.(Asian paint/ Berger) |
| 81 | Supplying and fitting fixing of Un-plasticised poly Vinyl Chloride UPVC (FENESTA/NCL VEKA LTD) casement window with top fixed - 60 series duly manufactured using UPVC reinforced profile of 60x55x2.5mm for outer frame , 75x60x2.25 mm for casement window sash profile and 74x60x2.5mm mulion profile capable of mounting single glazing system structurally reinforced with hot galvanised up to 50 mic of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughend glass of saint gobain make duly fixed with EPDM weathering seal resistant accessories etc complete conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standard |
| 82 | Supplying, fitting and fixing M.S. grill made out of M.S. flat confirming to IS-1977/1996 as per the design [email protected]/sqm (tata/sail/jindal) |
| 83 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge..(Asian paint/ Berger) |
| 84 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete |
| 85 | Supplying, fitting, fixing of dressed seasoned sal wood choukath including cost, conveyance and all taxes of materials and labour (T&P) required for the work etc. complete as per direction of Engineer-in-Charge. |
| 86 | Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials. |
| 87 | Providing fitting, fixing of Al. door with anodized Al. door section No. 9202 as vertical member, 9201 as top member and 9200 as bottom and middle & top member andand 12mm thick pre-laminated board on bottom and the frame to be completed bymeans of jointing angle No. 1855 including all cost of labour, T&P , hire charges ofdrilling machine, labour charges etc. complete. |
| 88 | Supplying, fitting, fixing of stainless steel of 304 grade in Hand Railing/Grill etc using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification , buffing ,polishing etc. with cost conveyance taxes of all materials , labour , T&P required for completion of the work in all reapect as per the direction of the Engineer- in - charge. (Make of Jindal or Sail) |
| 89 | Providing fixing granite on steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles |
| 90 | Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over |
| 91 | Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures. all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over |
| 92 | Providing fitting, fixing up library book shelvs with 19mm thick BWR ply wood including cost of all materials, all lebour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.(ply make of Marino, Greenlam) |
| 93 | Providing fitting, fixing up windows blinds including cost of all materials, all lebour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 94 | Providing fitting, fixing of PVC door with choukath, frame etc complete including cost of labour, T&P , hire charges ofdrilling machine, labour charges etc. complete. |
| 95 | Third Floor Brickwork with Fly Ash Bricks 25cmx12cmx8cm having crushing not less than 35kg/cm² in C.M (1:6) in Superstructure including cost of all and complete finished in all respect. |
| 96 | Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in Superstructure including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. (Ref.:-A/R-2006,P-71, Item no-2) |
| 97 | R.C.C. work of M-25 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. RCC Column in Super Structure |
| 98 | RCC Wall Beams |
| 99 | RCC Lintel |
| 100 | RCC Chajja |
| 101 | RCC Roof Slab |
| 102 | RCC Stair case |
| 103 | Providing Straightening, cutting ,bending, binding HYSD Steel bars including cranking, hooking, welding or jointing the M.S coiled road or tor confirming to I.S 432 (Plain) and 1785 (Tor) steel and binding etc complete. (tata/sail/jindal) |
| 104 | Providing 16mm thick cement plaster (1:6) finished smooth to in side surface of 9\\" thick brick walls after out the joint including watering and curing for 7 days with cost,conveyance, royalities and taxes of all materials and labour with T&P required for the work etc. IN SIDE complete in all respect in all floors. |
| 105 | Providing 12 mm thick Cement Plaster in (1:6) over brick work including cost, conveyance,royalities and taxes of all materials and labour with T&P required for the work etc.complete. OUT SIDE |
| 106 | Providing 6 mm thick Cement Plaster in (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge. |
| 107 | Supplying, fitting, fixing of Vitrified tile flooring on 20mm thick bed of C.M. (1:4) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. (make of Johnson, Kajaria, Somany 2'x2' or 2'x4' size) |
| 108 | Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete. (make of Johnson, Kajaria, Somany 2'x2' or 2'x4' size) |
| 109 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. (Asian paint/ Berger) |
| 110 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Asian paint/ Berger) |
| 111 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.(Asian paint/ Berger) |
| 112 | Supplying and fitting fixing of Un-plasticised poly Vinyl Chloride UPVC (FENESTA/NCL VEKA LTD) casement window with top fixed - 60 series duly manufactured using UPVC reinforced profile of 60x55x2.5mm for outer frame , 75x60x2.25 mm for casement window sash profile and 74x60x2.5mm mulion profile capable of mounting single glazing system structurally reinforced with hot galvanised up to 50 mic of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughend glass of saint gobain make duly fixed with EPDM weathering seal resistant accessories etc complete conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standard |
| 113 | Supplying, fitting and fixing M.S. grill made out of M.S. flat confirming to IS-1977/1996 as per the design [email protected]/sqm (tata/sail/jindal) |
| 114 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge..(Asian paint/ Berger) |
| 115 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete |
| 116 | Supplying, fitting, fixing of dressed seasoned sal wood choukath including cost, conveyance and all taxes of materials and labour (T&P) required for the work etc. complete as per direction of Engineer-in-Charge. |
| 117 | Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials. |
| 118 | Providing fitting, fixing of Al. door with anodized Al. door section No. 9202 as vertical member, 9201 as top member and 9200 as bottom and middle & top member andand 12mm thick pre-laminated board on bottom and the frame to be completed bymeans of jointing angle No. 1855 including all cost of labour, T&P , hire charges ofdrilling machine, labour charges etc. complete. |
| 119 | Supplying, fitting, fixing of stainless steel of 304 grade in Hand Railing/Grill etc using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification , buffing ,polishing etc. with cost conveyance taxes of all materials , labour , T&P required for completion of the work in all reapect as per the direction of the Engineer- in - charge. (Make of Jindal or Sail) |
| 120 | Providing fixing granite on steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles |
| 121 | Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over |
| 122 | Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures. all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over |
| 123 | Providing fitting, fixing up library book shelvs with 19mm thick BWR ply wood including cost of all materials, all lebour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.(ply make of Marino, Greenlam) |
| 124 | Providing fitting, fixing up laboratory table with 19 mm thick BWR ply wood including cost of all materials, all lebour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. (ply make of Marino, Greenlam) |
| 125 | Providing fitting, fixing up windows blinds including cost of all materials, all lebour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 126 | Providing fitting, fixing of PVC door with choukath, frame etc complete including cost of labour, T&P , hire charges ofdrilling machine, labour charges etc. complete. |
| 127 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 128 | Terrace Floor Brickwork with Fly Ash Bricks 23cmx12cmx8cm having crushing not less than 35kg/cm² in C.M (1:6) in Superstructure including cost of all and complete finished in all respect. |
| 129 | R.C.C. work of M-25 using 20mm and down graded hard granite Crusher broken chips including laying, hoisting, Centring & shuttering with all cost, conveyance etc. complete. RCC Column in Super Structure |
| 130 | RCC Wall Beams |
| 131 | RCC Lintel |
| 132 | RCC Roof Slab |
| 133 | Providing Straightening, cutting ,bending, binding HYSD Steel bars including cranking, hooking, welding or jointing the M.S coiled road or tor confirming to I.S 432 (Plain) and 1785 (Tor) steel and binding etc complete. (tata/sail/jindal) |
| 134 | Providing 16mm thick cement plaster (1:6) finished smooth to in side surface of 9\\" thick brick walls after out the joint including watering and curing for 7 days with cost,conveyance, royalities and taxes of all materials and labour with T&P required for the work etc. IN SIDE complete in all respect in all floors. |
| 135 | Providing 12 mm thick Cement Plaster in (1:6) over brick work including cost, conveyance,royalities and taxes of all materials and labour with T&P required for the work etc.complete. OUT SIDE |
| 136 | Providing 6 mm thick Cement Plaster in (1:4) over RCC surface including deep chiping & including all cost, conveyance, taxes, royalities etc. complete as directed by the Engineer-in-charge. |
| 137 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. (Asian paint/ Berger) |
| 138 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge. (Asian paint/ Berger) |
| 139 | Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.(Asian paint/ Berger) |
| 140 | Supplying and fitting fixing of Un-plasticised poly Vinyl Chloride UPVC (FENESTA/NCL VEKA LTD) casement window with top fixed - 60 series duly manufactured using UPVC reinforced profile of 60x55x2.5mm for outer frame , 75x60x2.25 mm for casement window sash profile and 74x60x2.5mm mulion profile capable of mounting single glazing system structurally reinforced with hot galvanised up to 50 mic of minimum thickness of 1.5 mm prefabricated and welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughend glass of saint gobain make duly fixed with EPDM weathering seal resistant accessories etc complete conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standard |
| 141 | Supplying, fitting and fixing M.S. grill made out of M.S. flat confirming to IS-1977/1996 as per the design [email protected]/sqm (tata/sail/jindal) |
| 142 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge..(Asian paint/ Berger) |
| 143 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 144 | INTERNAL ELECTRICAL WORKS Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A |
| 145 | Wiring for group controlled (looped) light point/ fan point/ exhaust fan/wall fan point/ call bell point (without independednt switch) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A |
| 146 | Group B |
| 147 | Group C |
| 148 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 149 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 150 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 151 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 152 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the samein case of recessed conduit as required. 20 mm |
| 153 | 25 mm |
| 154 | 32 mm |
| 155 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 156 | Supplying and fixing suitable size GI box with modular plate and cover in FRLS on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 157 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular switch, connection etc. as required. |
| 158 | Installation, testing and commissioning of pre-wired, LED Light fittings of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 159 | Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. |
| 160 | Spply and Fixing of Two Module Stepped type electronic fan regulator on the existing Modular Plate Switch Box including connections but excluding modular plates etc. as required |
| 161 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm) |
| 162 | 3 Module (100mmX75mm) |
| 163 | 4 Module (125mm x 75mm) |
| 164 | 6 Module (200mm x 75mm) |
| 165 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Internet antenna socket outlet |
| 166 | Modular blanking plate |
| 167 | Supply, installation, Testing and commissioning of 1200 mm five star energy efficient ceiling fan with as per EIC of approved make including with complete materials & labour. |
| 168 | Supply, installation, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting including 1 no. of 20watt LED luminaries of minimum 100Lm/Watt, 50K burning hours,CCT 5700K or as per EIC of approved make including with complete materials & labour. |
| 169 | Supply, Installation,Testing & commissioning of 12W, minimum of 100Lm/Watt, 50K burning hours,CCT 5700K or as per direction of EIC of approved make including with all materials & labour etc. |
| 170 | Supply, Installation,Testing & commissioning of 30W street light fittings. |
| 171 | Supply, Installation,Testing & commissioning of Angle Holder with 9W LED bulb. |
| 172 | Supply, Installation,Testing & commissioning of 12 Way SPN DB of IP43 rating suitable for installation of MCB,RCCB,Isolator, Electromechanical RCBO as incomer.(without MCB/RCCB/RCBO/ISOLATOR) |
| 173 | Supply, Installation,Testing & commissioning of 63A DP MCB. |
| 174 | Supply, Installation,Testing & commissioning of 6A-32A SP MCB as per the requirement. |
| 175 | Supplying, installation, testing and commissioning of 1.5 tonne 5 star AC of Blue satr/Voltas/Samsung with all equipments like (stabilizer, stand transporting etc ) to the buildings fed by the substation. |
| 176 | INTERNAL (P.H) Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/SUPREME/ORIPLAST (a) 40mm dia |
| 177 | 25mm dia |
| 178 | 20mm dia |
| 179 | Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/SUPREME/ORIPLAST 50mm dia from source to GL & GL to OHT |
| 180 | Providing all materials, labour, T&P for laying/fixing of following dia uPVC Aquasafe pipes as per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/SUPREME/ORIPLAST 50mm dia |
| 181 | Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC. |
| 182 | Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge. For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall |
| 183 | Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge. |
| 184 | Providing all materials, labour, T&P for fitting & fixing of following Bronze Ball Valves confirming to IS-778 with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO/LEADER (a) 40mm dia Bronze ball valve |
| 185 | 25mm dia Bronze ball valve |
| 186 | 40mm dia brontz horizontal check valve |
| 187 | Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china Floor mounted water closet Rimless (European pattern) confirming to IS 2556: PART-8-2004 ,with P or S Trap with seat cover (solid) of approved make in all floor & Flush tank including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/PARRYWARE/HINDWARE/CERA |
| 188 | Supply all materials and labour for fitting and fixing of following size white glazed vitreous china Half Padestal wash hand basin of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. including all duties, transportation etc. all complete as per direction of EIC. Make : JAQUAR/PARRYWARE/HINDWARE/CERA |
| 189 | Supplying, fitting and fixing of following types CP fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. Make : JAQUAR/PARRYWARE/HINDWARE/CERA (a) Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook |
| 190 | 15mm dia Angular Stop Cock with wall flange |
| 191 | Shortbody Bib cock with Wall Flange |
| 192 | CP soap dish holder |
| 193 | C.P. Toilet Roll holder with stainless steel flap |
| 194 | Towel Ring Round |
| 195 | 150mmX150mm square trap with 5mm Border |
| 196 | 32mm Half Thread Waste Coupling |
| 197 | 15mmx450 mm Braided Hose Connection Pipe with both side Nuts & Rubber Washers . |
| 198 | Extension Piece (15 x 25 mm) |
| 199 | 32mm dia C.P. Coat Hook (Double) |
| 200 | Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C. (n) Bevelled edge mirror(500x500mm) |
| 201 | Pillar Cock |
| 202 | Service sink (24\\"x 18\\" x 10\\" STEEL sink single bowl) |
| 203 | Sink Cock with Regular SwingingSpout (Wall Mounted Model) With Wall Flange |
| 204 | Providing all materials, labour, T&P for fixing Overhead Shower ø105mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated)with Rubit Cleaning System & Shower Arm 600X25X25mm with Flange |
| 205 | Providing all materials, labour, T&P for fitting and fixing of 15 lit storage type hot water geyser including all necessary nut, bolts , piping acceosories etc complete |
| 206 | Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make:ASTRAL/ASHIRVAD/SUPREME/ORIPLAST (i) 110mm dia soil pipe |
| 207 | 110mm dia waste pipe |
| 208 | Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 in all floor with all taxes, duties, transportation & requisite testing as per specification & direction of EIC.Make:ASTRAL/ASHIRVAD/SUPREME/ORIPLAST 110mm Pushfit Coupler |
| 209 | 110mm x110mm P-Trap |
| 210 | 110mmx87.5º bend |
| 211 | 110mmx87.5º door bend |
| 212 | 110mmx45º bend |
| 213 | 110mm dia Single Tee |
| 214 | 110mm dia Single Tee with Door |
| 215 | 110mm dia Single 'Y' |
| 216 | 110mm dia Single 'Y' with Door |
| 217 | 110mm dia Double 'Y' |
| 218 | 110mm WC connector straight with lip ring |
| 219 | PVC Clamp Suitable for 110mm dia pipe |
| 220 | 110mm dia Vent cowl |
| 221 | 110mm Socket plug |
| 222 | Multi floor trap |
| 223 | Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-A) For rain water Stacking pipe in the Duct(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make:ASTRAL/ASHIRVAD/SUPREME/ORIPLAST (a) 110mm dia Bend (87.5 degree) |
| 224 | 110mm dia pushfit coupler |
| 225 | 110mm dia pipe |
| 226 | Vertical Grating 150x150mm for Rain water gutter on terrace ,opening to 110mm dia Rain water pipes |
| 227 | Supplying and Fixing of Sintex Triple (3) Layer (ISI Marked) over head water storage tank with following capacities conforming to IS : 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto required elevation and placing the tank to the required position etc all complete as per direction of Engineer-in-Charge.(Make -Sintex) (a) 5000 Litres Capacity Triple Layer Tank white for Drinking& Flushing &waterfountain Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender