Housing Urban and Rular Development Government Departments Closing in 4 days TDR #58466485

Tender For Repair And Maintenance Of Electrical Work In Ulb Level Mpis At Banpur Nac In The District Of Khordha Buildings.

Issued by Government Departments · Khordha, Odisha
Tender Value
6.98 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
7000
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair And Maintenance Of Electrical Work In Ulb Level Mpis At Banpur Nac In The District Of Khordha Buildings.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 20-Nov-2026 Extention of date and Modification in clause of DTCN Date 26-Nov-2026

BOQ

Name of Work:- Repair and maintenance of electrical work in ULB Level MPIS at Banpur NAC in the district of Khordha Buildings.
Sl. No. Item Description
1Supply and installation of 36Watt Surface/ Recess type Panel light 2x2 ft., Dimension-595mm x 595 mm x 70mm (+/- 10%) of following body material and construction as per IS : 10322 with metalic body driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, driver supply connection with Phase, Neutral and Earth terminal,THD < 10% , P. F. 0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K/ 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Minimum 5 year OEM warranty. System lumen efficacy >= 130 lm/ Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. (Thermal management: heat sink of aluminium housing suchthat LED junction temperature shall not rise above 90°C). (All the reports shall be furnished from 3rd Party Central/ State Govt/ Private Lab. The Lab should be NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar) Powder coated die cast/ Extruded aluminium Body (Thickness > 1.20 mm)
2Supply and installation of 20 Watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F. 0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. Minimum 1 year OEM warranty. System lumen efficacy 110 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.(Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (All the reports shall be furnished from 3rd Party Central/ State Govt/ Private Lab. The Lab should be NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar)
3Supply, Installation, Testing and Commissioning of following sweep ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, 100% copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req. (Make: USHA/ Havells/ Crompton) 1200mm sweep, BEE 5 star rating, service value 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) (Make: USHA(Technix)/ Havells(Pro28)/ Crompton(Niteo))
4Supplying and fixing flame-retardant antibacterial two module stepped type electronic fan regulator conforming to IS 11037 compatible to existing modular plate having metal back plate & switch box including connections etc. as required. (Make:- Panasonic(Vision)/ Legrand(Myrius)/ Schneider (Zencelo))
5Supply and installation of 250Watt Flood Light, powder coated pressure die cast aluminium body, Precise lens, Polycarbonate (PC) Lens with built in driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F. 0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect. Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (All the reports shall be furnished from 3rd Party Central/State Govt/Private Lab. The Lab should be NABL accredited lab). (Make:- Wipro/ LT/ Bajaj/ Havells/ Panasonic/ Phillips/ Jaquar)
6Complete Servicing, overhauling with wet servicing of 1.5 / 2 Ton Split AC/ Ductable AC including checking of Both IDU & ODU Unit
7Supply & Installation of surface LED Luminarie of Entry/Exit Light with back up for 2 hrs. of make BAJAJ (CAT: BESL 03 LED SSD WBB) & equivalent of LT/Philips/Crompton
8Digital Time Switche 2 output 16 A - 250 VA 50/60 Hz Astronomical function 2x28 programmes(Legrand/Schneider/ABB)
9Supplying and fixing following ISI Marked modular flame-retardant antibacterial switch/ socket conforming to IS 3854 and IS 1293 on the existing modular plate & switch box including connections as required. (Make:- Panasonic(Vision)/ Legrand(Myrius)/ Schneider (Zencelo)) 5/6 AMP Switch
10Supplying and fixing following ISI Marked modular flame-retardant antibacterial switch/ socket conforming to IS 3854 and IS 1293 on the existing modular plate & switch box including connections as required. (Make:- Panasonic(Vision)/ Legrand(Myrius)/ Schneider (Zencelo)) 15/16 AMP Switch
11Supplying and fixing following ISI Marked modular flame-retardant antibacterial switch/ socket conforming to IS 3854 and IS 1293 on the existing modular plate & switch box including connections as required. (Make:- Panasonic(Vision)/ Legrand(Myrius)/ Schneider (Zencelo)) 5/6 AMP Socket outlet with sutter
12Supplying and fixing following ISI Marked modular flame-retardant antibacterial switch/ socket conforming to IS 3854 and IS 1293 on the existing modular plate & switch box including connections as required. (Make:- Panasonic(Vision)/ Legrand(Myrius)/ Schneider (Zencelo)) 15/16AMP Socket outlet with sutter Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58466485
AUTHORITY Government Departments
TENDER VALUE 6.98 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Repair And Maintenance Of Electrical Work In Ulb Level Mpis At Banpur Nac In The District Of Khordha Buildings.
Basic Detail
Tender No TCN-22-26-27
Bidding Type Tender
Location
City Khordha
State Odisha
Key Dates
Publish Date 20 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 6.98 Lakhs
Tender Fee 4000
EMD 7000
Exemption Available
Document List
7e61685a-4cfc-4353-a0f1-744fe8cfa3e2.html
BOQ_619570.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 4 days
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

7e61685a-4cfc-4353-a0f1-744fe8cfa3e2.html

xls

BOQ_619570.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender