Housing Urban and Rular Development Government Departments Closing in 6 days TDR #58464735

Tender For Construction Of Addition Room At Pwd (R&B)Division Akhnoor Under Non Plan

Issued by Government Departments · Jammu, Jammu and Kashmir
Tender Value
12.25 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
24500
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Addition Room At Pwd (R&B)Division Akhnoor Under Non Plan

BOQ

Name of Work:- Construction of addition room at PWD (R&B)Division Akhnoor under Non Plan
Sl. No. Item Description
1Demolishing mud phaska in terracing and disposal of material within 50 meters lead .
2Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size
3Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:6 (1 cement : 6 fine sand).
4Extra for brick work in super structure above plinth level upto floor V-level.
5Providing/Fixing of aluminium doors , windows in frames and shutters including required glazing / wire guage and required fittings all complete
6Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
7Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars. ((Thermo-Mechanically Treated bars of grade Fe-500D or more.))
86 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
912mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)
1015mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)
11Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. Projections.
12Centering and shuttering including strutting, propping etc. and removal of form work for :-
13Lintels, beams, plinth beams.
14Suspended floors, roofs, landings and access platforms
15Edges of slab upto 20cm wide
16Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc. (Make Armocreate of SWC Chryso France) consisting of (a) applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining was upto 300mm height including rounding of junction of walls and slaps.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (iv) Finishing the surface with 20mm thick joint less cement mortar of mix 1: 4 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm / sq 3mm deep. (e) The whole terrace so finished shall be flooded with water far a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurras as 65mm
17Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
18Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.
19Providing and laying FULL TYPE vitrified floor tiles 600x600 mm (in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
20Providing and laying 16mm thick Granite of any colour and shape (area of slab over 0.5 Sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.
21Providing and fixing ceramic glazed floor tiles (non-skidding) 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming to IS : 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.
22Providing and fixing PRM Quality Ceramic Glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
23Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
24Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
25Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
26Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes of 110mm diameter.
27Providing and fixing aluminumhanging floor door stopper, ISImarked, anodized (anodic coatingnot less than grade AC 10 as per IS :1868) transparent or dyed torequired colour or shade withnecessary screws etc. complete : Twinrubber stopper
28Doors
29Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia.
30Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. BENDS
31Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid , 10 liter low level whitevitreous chinaflushing cistern and CP flush bend with fittings and C.I. brackets, 40mmflush bend, overflow arrangement with specials of standard make andmosquito proof coupling of approved municipal designcomplete, including painting of fittings and brackets, cutting and makinggood thewalls and floors wherever required: 18.3.1 W.C. pan with ISI marked white solid plastic seat and lid.
32Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P holder for hand spray complete in all respects as per direction of Engineer-In charge
33Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
34Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :18.11.2 Kitchen sink without drain board 610x460mm bowl depth 200mm
35Providing and fixing, testing andcommissioning of C.P brass Sinkmixer with regular swinging spout(wall mounted model) withconnecting legs and wall flangescomplete as required and makinggood as per direction of Engineer-in-charge
36Providing & fixing C.P. hand spraywith lever control (health faucet) andflexible hose 1 m long connectionwith C.P. holder for hand spraycomplete in all respects as perdirection of Engineer-Incharge.
37Providing and fixing heavy class SS grating plane floor trap and setting in floor with cement mortar to matach the floor finish as per direction of Engineer-in-charge (size 100mm dia) ISI marked.
3815 mm dia nominal bore
39Providing and fixing C.P. brass angle valve of approved quality
4015 mm dia. nominal bore (Medium)
41Providing and fixing ball valve (brass) of approved quality, High or low pressure, complete compatable to connection with pipe as per the direction of Engineer Incharge.
4215 mm dia. nominal bore (Medium)
4320 mm dia. nominal bore (Medium)
44Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. External Work.
4515 mm dia. nominal bore (Medium)
4620 mm dia. nominal bore (Medium)
47Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work.
4815 mm dia. nominal bore (Medium)
4920 mm dia. nominal bore (Medium)
50Providing and fixing Brass Stop Cock of approved quality
5115 mm nominal bore
5220 mm nominal bore
53Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
5425 to 40 mm nominal bore
55Providing & fixing C.P. brass robe hook fixed to wall/door with plastic rawl plugs and C.P brass screws including cutting and making good the walls wherever required asper direction of Engineer-Incharge.
56P/F of Soap Dish Holder with allfittings as per direction of Engineer-in-charge
57\\"Providing and fixing brass towel Ring Round with Round Flenge ofapproved make complete with all fittings
58Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
59Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
60Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
61P/F of blind for windows incl. all fixtures and fittings and necessary arrangements etc complete job (superior quality) vertical blind
62Providing and fixing 600 x 600 mm size Gypsym board for false celling 6mm over a steel frame complete
63Supply, assembly, erection, testing and commissioning of pumping system comprising the 1 HP Crompton Mini Master Water Motor .
64Disposal of Mulba
65P/F of Electrical points complete job
66Providing and fixing 595X595 mm white light panel of recognized make or equivalent to USHA/HAVELLS/ GOLDMEDAL/ PHILLIPS etc of 45-60 wattage
67Carriage of materials by M.T
68Sand for a lead of 10 km
69Stone aggrigates below 40 mm for a lead of 10 km
70Bricks for a lead of 8 km Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58464735
AUTHORITY Government Departments
TENDER VALUE 12.25 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Addition Room At Pwd (R&B)Division Akhnoor Under Non Plan
Basic Detail
Tender No e-NIT No. 62 of 2026-27 Dated 09-11-2026
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 10 Nov 2026
Submission Date 23 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 12.25 Lakhs
Tender Fee 600
EMD 24500
Exemption Not Available
Document List
69c60b0b-ecf8-4aac-83c8-875fd77b8263.html
BOQ_1122548.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

69c60b0b-ecf8-4aac-83c8-875fd77b8263.html

xls

BOQ_1122548.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender