Tender For Supplying, Installation, Testing And Commissioning Of 60 Ton Weighing Bridge (Pitless Type) Incld. Mobile Container Load Dock Ramp With Loading Capacity 15Mt.Advertised Cost=₹ 31.20 Lacs (Amount Without Gst=₹ 26.44 Lacs, Gst Amount=₹ 04.7
Tender Overview
Project Description
Tender for Supplying, Installation, Testing And Commissioning Of 60 Ton Weighing Bridge (Pitless Type) Incld. Mobile Container Load Dock Ramp With Loading Capacity 15Mt.Advertised Cost=₹ 31.20 Lacs (Amount Without Gst=₹ 26.44 Lacs, Gst Amount=₹ 04.76 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Mechanical WorksDesign, Supply, Installation, Testing & successful Commissioning of 60MT capacity Pit less Type (16Mx3M) Electronic weigh bridge. The job involves following processes & involvement of material as detailed under; Cost on account of Fully Welded Pit less Modular Type Weighbridge having platform structure of size (16Mx3M) conforming to capacity of 60MT with overload capacity +20%, With minimum resolution 10kg in compliance with accuracy standards of Weight & Measures. The Platform shall be made out of E-350 Grade Mild Steel Chequered Plate as per IS; 2062, Main 1-Beam out of E-350 Grade plate, The Main beam, Cross supports & Top Plate shall be completely welded to each other. The Bridge should be provided with suitable Glide frame on both sides. All the fasteners must be of carbon steel/stain less steel of IS Standard. The whole structure shall be painted by 2 Coat of Zinc rich epoxy anti corrosive primer. All structural Material shall conform to IS 2062 Standard. The Make of Steel for platform & other structures shall be of primary steel manufacturer like SAIL/TISCO/JINDAL/ESSAR.A) Platform Main Frame: made out of ISMB 300 mm grade following IS-808 standardsQty: Length 6 m x 16.5 = 99 mWeight @ 46 kg/m= 99 x 46= 4554 kg(B) Platform Tranverse Beam: made out of ISMB 350 mmQty: Width 3m x 4 = 12mWeight @ 52.4 kg/m = 12 x 46 = 629 kg(C) Platform Top Plate: made of 12mm chequered steel plateQty: Area = 16m x 3m = 48 sqmWeight@ 94.2 kg/sqm = 94.2 x 48 = 4,521.6 kg d) 12 MM thick MS Foundation/mounting Plates. 8no (0.40*0.40):8 (0.15*0.15)=1.46 m2=94.2kg/m2=138kgTotal Steel involved 9842.6 kgs. e) Railings on both sides out of 65MM 6 4.3MM Thick MS Pipe2no *20=40 RMT @7.93kg/m =317.2 kg |
| 2 | SITC of 30 Tons Self-aligning, double pendle, anti-rotation strut mounting including prefitted pre- greased, load buttons each double ended shear beamtype and IP69K certified LOAD CELLS with hose clip with overload capacity equal to 150% of the rated capacity AND Ultimate (Breaking) Overload of 300% of Rated Capacity with operating temperature range of (-10 to +50)C˚. maximum communication distance if 1200 m.The Job also includes top plates of dimensions 60mmx160mmx25mm thick, 8 no. bottom plates of dimensions 150mmx150mmx 8mm thick Teflon plate,8 no.base plate of dimensions 310x310mmx 20mm with 40 foundation bolts for load cell assembly and other allied accessories like Nut bolts etc for the assembly of the overall frame and the required epoxy paint for all other components |
| 3 | Providing/Fitting of the Smart Intelligent Terminal System capable of operating on 230Volt AC,±10% 50HZ, 1 & AC Supply, ambient Temperature of -10 degree to 40degree Microprocessor based technology Direct Connect Dot- Matrix/Laser Printer with full Graphical LCD Display (130x40MM) with inbuilt 2.0 to 2.5 Lac Memories Storage Facility with USB Port for data entry & USB interface facility for data back up in external memory stick (Pen Drive) with vehicle vise entry & report printing. The job also includes providing of suitable capacity power back up system (UPS). (OEM recommended make) |
| 4 | SITC of Intelligent Terminal (SS 304 Housing) with in-built Weight Indicator a standalone along with dynamic lock (OTP) function to avoid unauthorized access, dedicated microcomputer having memories to store, view & print weight tickets and obtain daily/periodic reports as well as reports based on supplier, vehicle, material etc. along with Power cable, Printer cable, RS232 cable with one additional display and Electrical components like wires and switches etc. |
| 5 | Providing & installation of Personal Computer of Specification as below :A. Processor : intel core i5 12th Gen or higher B. Display size: Full HD with display size >= 23.8 inchesC. operating system : Windows11 preloadedD. Memory : 8GB Ram DDR4 or HigherE. Storage: 512GB SSD or Higher The PC should have Microsoft office, Wifi and bluetooth Make: HP/Lenovo/Dell |
| 6 | Providing/Fitting of the Flex Pipe Conduct , 2 Meter for each load cell (Rat protection) power Cable Digitizer, RS 232 Interfacing Cable for cummination with PC. |
| 7 | Earthing of the weigh bridge by way of chemical earthing. The Earthing system should be based on use of G.I Pipe not less than 50mm dia. The earth electrodes shall be driven to depth of not less than 2.5 meters below the ground level and at least 2.5 meter away from the system. There shall be no requirement to add water or any other chemical any time after initial installation. |
| 8 | Providing and fitting of constant voltage stabilizer 5 Kva having range 90V-220.The transformer should be copper wound , to be fitted on the wall with help of fasteners as required at site. |
| 9 | Supply and Installation of Mobile load dock leveller with loading capacity > 15 Ton of size ≥(2500 x 2000)mm with adjustable leg support and adjustable height from 1.1m-1.8m.Operation: Electro HydraulicMOC : MS |
| 10 | AMC: Annual Maintenance contract of 03 years after completion of the guarantee period. The firm shall depute their service Engineer quarterly to attend preventive maintenance. The job includes free repairs of the parts during AMC Period, if found faulty i.e load cell, indicators. The job also includes Calibration and stamping during AMC period and arrange Government official visits of weights measurements department for verification and stamping. |
| 11 | Laser printer and keyboard with all required cables with report generation for Weighment & printouts, Date wise, Vehicle wise, sorting data based on print out fields. |
| 12 | Electrical WorksProviding and fitting of 32 amp MCB along with enclosure. |
| 13 | Providing and fitting of 1.5 sq.mm wire for lighting purpose |
| 14 | Providing and fitting of 2.5 Sq.mm wire for heating purpose |
| 15 | Providing and fitting of 25 mm channel/PVC |
| 16 | Providing and fitting of 16 Amp SS combine |
| 17 | Providing of 6A switch socket |
| 18 | Providing and fitting of 15 watt LED Embedded concealed lights with inbuilt choke of reputed make |
| 19 | Providing and fitting of 2 core 25 sqmm armoured Aluminium conductor for providing electric supply from the nearest power source/pole. The job includes laying of the cable underground/clamping of the cable on wall/surface as required at site. |
| 20 | Providing, Installation, Testing and Commissioning of 50Watt LED outdoor type. The LED shall have pressed die cast aluminum housing with powder coated finish and having ingress protection IP 66. The job includes providing of fixtures and DP switch 16 A MCB |
| 21 | Civil Work for Mechanical partEarth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 22 | Providing and laying in position stone soling laid dry hard packed tightly including all carriages complete |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 24 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form work(Foundations,footings,bases of columns etc for mass concrete) |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels. Fe-500D TMT bars vide |
| 27 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender