Tender For Installation Wall Panelling And Allied Items At Bhq Chowki Choura, Panchayat Chowki, Block Chowki Choura, Under Bdc Capex Budget For The Year 2026-27 Adv Cost 1.49 Lacs
Tender Value
1.49 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
4 days left
EMD
2980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Wall Panelling And Allied Items At Bhq Chowki Choura, Panchayat Chowki, Block Chowki Choura, Under Bdc Capex Budget For The Year 2026-27 Adv Cost 1.49 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing PVC WALL PANELLING including fixing and finishing in all respect complete job as desired by Engineer in charge (Ceiling) LMR |
| 2 | Providing and fixing PVC WALL PANELLING including fixing and finishing in all respect complete job as desired by Engineer in charge (Wall Panneling) LMR |
| 3 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge |
| 4 | Brick work with brick of class designation 75 above plinth level upto floor V level in cement mortar 1:6 |
| 5 | Providing 15 mm cement plaster of mix 1:6 fine sand |
| 6 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel of 1.25mm/1.60mm thickness including hinges jamb, lock, jamb, bead , including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile B Fixing with adjustable lugs with split end tail to each jamb |
| 7 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Ply wood 5 ply, 9 mm thick, Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type |
| 8 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work |
| 9 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid , 10 liter low level white vitreous chinaflushing cistern and CP flush bend with fittings and C.I. brackets, 40mmflush bend, overflow arrangement with specials of standard make andmosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good thewalls and floors wherever required:18.3.1 W.C. pan with ISI marked white solid plastic seat and lid.18.3.2 W.C. pan with ISI marked black solid plastic seat and lid. |
| 10 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingle hole basin mixer of approved quality and make, including paintingof fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mmCP Brass single hole basin mixer |
| 11 | SUPPLY AND FIXING OF INTERNAL AND EXTERNAL ELECTRICFICATION INCL CIRCUIT BOARD, SWITCHES, SOCKET , SWITCH BOARD, MCB, LED BULD, 1*1 Pannel Light ETC READY TO USE WITH |
| 12 | P/F C.P Brass bib cock of approved quality (Cera,Jaguar,Hindwre) conforming to IS 8931 15 mm nominal bore |
| 13 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to European type W.C. ofquality and make as approved by Engineer - in - charge. |
| 14 | Providing and fixing display board including writing complete etc |
| 15 | Providing and fixing aluminium work for doors, windows, ventilators and partition with extruded built up standard tubular sections/appropriate z section and other section of approved make conforming to IS 733 and IS 1285 fixed with dash fastner of required dia and size including necessary filling up of gaps at junctions i.e at top, bottom and sides with required EPDM rubber/neoprene gaskit felt etc. Aluminium sections shall be smooth, Rust free, straight, mitred and joint where ever required including cleat angle aluminium snap beading for glazing /panneling, c.p. brass/stainless steel screws,all complete as per architectural drawings and the directions of Engineer-in-charge panelling and dash fastners to be paid for seprately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender