Short dated tender - Tender For Supply And Installation Of 02 Nug Swagat Dwer At Mirzapur For D.R.D.A. Mirzapur U.P.
Tender Value
21.75 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
0 days left
EMD
22000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Moradabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short dated tender - Tender for Supply And Installation Of 02 Nug Swagat Dwer At Mirzapur For D.R.D.A. Mirzapur U.P.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 1 m in width as well as 10 sqm on plan) including 2 dressing of sides and ramming of bottom, and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil. PWD. 252 |
| 2 | 1:4:8 (1 Cement 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) PWD. 281 |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size de rived from natural sources) SB (Here in Column footing) |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. PWD. 504 |
| 5 | Steel Work in Built up Tubular (round Or rectangular Hollow tubes Etc)including cuttting,hoisting,fixing, in position and applying priming coat of approved steel primer including welding and bolted with special shaped washer etc complete, 503 |
| 6 | 25mm dia and 600mm long for foundation bolt including threading nut bolt complete. |
| 7 | Crane charges for installation of post with driver for vertical post. |
| 8 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture 641+642 |
| 9 | Supply and erection of retro reflective signage board having 2mm thick aluminium sheet as sign substrate face fully covered with M3 scotchilte Diamond grade DG3 retro reflective prismatic grade sheeting all letters legends and written matter will be computer cut using 3M Scotchilte Electro cut overlay filmy and processed with CAS system as per process recommended by origional retro reflective sheeting manufacture, A 40X40X4mm MS angle iron all around back support frame will be provided to hold sign with overhead gantry/cantilever structure. The rear of sign board including back support frame will be dully painted with one coat of aluminium/MS primer and one or more coat of synthetic enamel paint. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender