Public Administrative Department Local Bodies Closing in 5 days TDR #58463960

Tender For Complete Development Work Of Gomti Biodiversity Park In Gomti Nagar Yojana In Phase 02, Construction Of Boundary Wall, Interpretation Center, Pathway Trail, Name Wall, Drain Cover And Modernization Work.

Issued by Local Bodies · Lucknow, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
20.95 Lakhs
Bank guarantee accepted
Document Fee
8000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Complete Development Work Of Gomti Biodiversity Park In Gomti Nagar Yojana In Phase 02, Construction Of Boundary Wall, Interpretation Center, Pathway Trail, Name Wall, Drain Cover And Modernization Work.

BOQ

Name of Work:- gomti nagar yojna mein gomti bio divercity park ka awesh vikas karya fase 02 mein boundry wall interpritation centre pathway trail, name wall , drain cover ka nirman ewam adyonikikaran ka karya
Sl. No. Item Description
1Supplying chemical emulsion in sealed containers including delivery as specified., Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
2Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti- termite treatment (excluding the cost of chemical emulsion) :, Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :, With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
3Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
4Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
5Construction of embankment with approved material obtained from row pit with a lift upto 1.5m, transporting to site , spreading , grading to required slope and compacting to meet required table 300.1 and 300.2 with a lead upto 1000 mtr as per technical specification clause 301.5 cartage upto 25km (SOR iteam 2020- 2021)
6Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil.
7Supply of 3000mm Extruded Square aluminum pole (grade 6063) Sq. 150 x 3mm thickness with IP68 Connector. Bespoke laser cutting design of length 1400mm with 50W In-Built LED with controlled downward light emission options (customized) with SS fasteners, Pre treated epdm black gaskets. Die-cast aluminum mounting plate Sq.250 x 12mm thick with 4 elongated holes 38 x 19 to suit M16 bolts at PCD 180 with pure polyester powder coating. Fixed with Hot dip galvanized foundation bolt. Mechanical resistance should be minimum IK06. The Pole should be undergone pure polyester powder coating process & Acid treatment to ensure high corrosion resistance. On the top of the pole there will be built-in Spot Lights of 2 x 18W LED are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, THD <10%, Inbuilt Surge protection 6KV. Optical grade clear toughened glass diffuser of 4mm thickness with controlled downward light emission. Colour Temperature LED 3000K, 230-240Vac, CRI >80, MacAdam step 3. The driver should be inbuilt in the pole itself and maintenance can be done from the junction box itself. PDC aluminum service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. The manufacturer should have Inhouse NABL accredited lab to check and provide correct photometry of the product. The make should be as per K-Lite Verbena Spot KL- 4583/Wipro/Ligman (PSR ITEAM AYURVEDA PARK )
8Transportation of T.W. Assembly From Store to the site of Tubewell. (PSR ITEAM LAXMAN PARK)
9Transportation of 600 P.S.I Air Compressor and its T&P from store to the site. (PSR ITEAM LAXMAN PARK)
10Transportation of O.P Unit and its T&P from store to the site. (PSR ITEAM LAXMAN PARK)
11Installation of Rig Machine alongwith dressing the site of work then drilling by 200/ 300 mm size bit upto required depth then reaming by 450mm, 550mm, and 675mm size bits, after drilling the dismantling work will be done. Erection of DC Rig Machine, T&P and camp equipages (PSR ITEAM LAXMAN PARK )
12Dismantlingz of Rig Machine and its T&P (PSR ITEAM LAXMAN PARK)
13Barricading of site for safety with necessary T&P and required labour etc. complete.(UPJN- Order Attached) (PSR ITEAM LAXMAN PARK)
14Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
15Tile brick masonry with common burnt clay F.P.S (non modular) tile bricks of class designation 10 in gauged arch work in superstructure above plinth level up yo floor V level in cement mortar 1:4 (1 cement : 4 coarse sand) ( DSR iteam 6.21)
16Arrangement of Sweeper labour for cleaning and sweeping. (PSR ITEAM BIODIVERSITY)
17aeration and filtration unit
18Add for ornamental and architecture work
19Supply, Installation, laying & commissioning of 90mm outer dia 6kg/cm2 HDPE pipe. Sanctioned rate.
20Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1 mm to 4 mm nominal size by volume), with under layer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete :, 18 mm thick crazy marble stone white, black or as specified.
21Providing & Fixing of 1.25\\" one piece QCV , (PSR Biodiversity Park)
22Providing & Fixing of Service Saddle 63mm X 1.25\\" (pp) (PSR Biodiversity Park)
23Providing and Supplying of Mayodendron Igneum, having ht. 18 Ft well developed, fresh & healthy Leaves in 50x50 inch bag size or as per direction in Engineer-in-charge.
24Providing and Supplying of Butea Monosperma, having ht. 16-18 Ft well developed, fresh & healthy Leaves in 40x40 inch bag size or as per direction in Engineer- in-charge.
25Providing and Supplying of Hildegardia Australiensis Plant, having ht. 12-14 Ft well developed, fresh & healthy Leaves in 40x40 inch bag size or as per direction in Engineer- in-charge.
26Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).
27Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
28Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
29Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required., In gratings , frames, guard bar , ladder, railings , brackets , gates and similar works
30Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
31Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all. material 8& labour required fixing and orienting etc all complete under the direction of the E/I. Sanction Rate.
32Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting and propping and removal of items for: Foundations, footings, base of columns, etc DSR 2023/5.9.1
33Centering and shuttering including strutting, propping etc. and removal of form for :, Suspended floors, roofs, landings, balconies and access platform
34Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts
35Centering and shuttering including strutting, propping etc. and removal of form for :, Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
36Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
37Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :, 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
38Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
39Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:6 (1 cement : 6 coarse sand)
40Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :, Cement mortar 1:6 (1 cement : 6 coarse sand)
41Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand), Above plinth level upto floor V level.
42Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :, Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4312 mm cement plaster of mix :, 1:6 (1 cement: 6 coarse sand)
4415 mm cement plaster on rough side of single or half brick wall of mix :, 1:6 (1 cement: 6 coarse sand)
456 mm cement plaster of mix :, 1:3 (1 cement: 3 fine sand)
46Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.
47Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete.
48Marble stone flooring with 18mm thick marble stone as per sample of marble shall be approved by Engineer-in-charge over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with :, Makrana white second quality.
49Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :, Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick.
50Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
51Providing and fixing to existing door frames., 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in- charge. (For W.C. and bathroom door shutter).
52Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge.
53Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
54Washed stone grit plaster on exterior walls of height upto 10 metre above ground level, in two layers, under layer 12mm cement plaster 1:4 (1cement: 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand :2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately).
55Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in- Charge.
56Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :, White sand stone - Exposed face machine cut and table rubbed with rough backing., 40 mm thick
57Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in wallswherever required.
58Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
59Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds., Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body., Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi- point locking system, nylon rollers with SS 304 body., Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body., Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body., Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body., Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi- point locking system, adjustable nylon rollers with SS 304 body., Two track four panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi- point locking system, adjustable nylon rollers with SS 304 body., Three track three panels sliding door with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi- point locking system, adjustable nylon rollers with SS 304 body., Three track three panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi- point locking system, adjustable nylon rollers with SS 304 body., Fixed window / ventilator without mullion / transom, Fixed window / ventilator with mullion / transom., Ventilator Casement window single panel with or without fixed panel with S S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles., Casement window single panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles., Casement window double panels with fixed mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles., Casement window double panels with French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles., Casement cum fixed panel window having one single casement panel & one fixed panel with S.S. 304 friction hinges as per size and weight of sash, multi point locking system, zinc alloy (zamak) powder coated handles., Casement cum fixed panel window having single casement panel at both ends & middle fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles., Casement Window with Double Rebate Frame with one Side Hung Glazed Panel and one Side Hung wire mesh Panel with S.S. 304 friction hinges as per size and weight of sash, multi- point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel, Casement Window with Double Rebate Frame with two Side Hung Glazed Panel and two Side Hung wire mesh Panel and Fixed Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel., Casement Window with Double Rebate Frame with two Side Hung Glazed Panel on outside and two Side Hung wire mesh Panel on inside and French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles with shoot bolt on both glazed and fly screen panel., Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides., Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides., Using R3 series with frame (55 mm & above) x (50mm & above) & sash (55 mm & above) x (85mm & above) & French (False) mullion (55 mm & above) x (60mm & above). (Height upto 2.5 meter).
60Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):, With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)
61Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding , other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
62Applying stamping finish to the top surface of freshly laid plain / reinforced cement concrete of specified grade in portico, side walks, drive ways, pool decks and open yard as per direction of the Engineer-in-Charge. * The concrete shall be placed and screened to the finished grade and floated to the uniform surface by using standard finishing techniques. approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in twoor more shakes floated after each shake and trowel only after final floating. The approved released agent @ 0.113 Kg/Sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethene stamp moulds of approved design and in required sizes to achieve final stamping pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size and weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while the concrete is in plastic stage of setting. * After stamping, the curing shall be done as per manufacturers specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per the requirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/Sqm on finished surface. * The construction joints shall be provided by grove cutting of size 4 mm x 20 mm in panel size 3 m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing & laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying polyurethene resin based topprotective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (The cost of concrete for flooring is not included in the item, which shall be paid for seperately).
63Pointing on tile brick work with cement mortar 1:3 (1 cement: 3 fine sand) :, Flush / Ruled/ Struck or weathered pointing.
64Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge., Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
65Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I)., 150 mm dia
66Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in- charge.
67Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
68Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement, All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum
69Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm 10cm long forked at end 60cm apart (minimum three lugs to be provided) including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete.
70Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
71Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc., Sal wood
7225mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with :, Second class teak wood
73French spirit polishing :, Two or more coats on new works including a coat of wood filler.
74Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :, 80 mm nominal bore
75Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :, Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300x16 mm
76Providing and fixing bright finished brass handles with screws etc. complete:, 125 mm
77Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :, 250x10 mm
78Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :, 200x10 mm
79Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :, same as item 21 above but on new wood surface
80Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):, From brick work in cement mortar
81Transportation of D.C. Rig machine & its T&P from store to the site of tubewell.
82Logging of bore hole by Electric logger (UPJN-Oder Attached)
83Supply of Lal Kuan quarry Pea Gravel 1.6 to 4.8 mm. size duly screened, washed and stacked, with carting loading, unloading complete at site
84Development of T.W. by 600 P.S.I. Air Compressor upto 100 hrs
85Dismantling of Air Compressor and its T&P
86Erection of O.P. Unit, T&P and camp equipages
87Yield and verticality test of T.W. alongwith Chemical and Bacterialogical analysis of tubewell's water.
88Supply of Power Cables,Solid Aluminum conductor up to 10 sqmm balance stranded conductor,XLPE Insulated,cores laid up, PVC tape innersheathed,unarmoured/Armour(Aluminium wire for single core up to 70 sqmm balance Aluminium strip, Glavanised wire for cables upto 2x16 sqmm, 3x10 sqmm & balance all galvanised steel strip),extruded PVC Type ST2 sheathed,650/1100V grade as per IS 7098(Part 1) 1988 4CX6Sq.mm Cable. RA-1 MR (PSR ITEAM BIODIVERSITY PARK
89Supply of Power Cables,Solid Aluminum conductor up to 10 sqmm balance stranded conductor,XLPE Insulated,cores laid up, PVC tape innersheathed,unarmoured/Armour(Aluminium wire for single core up to 70 sqmm balance Aluminium strip, Glavanised wire for cables upto 2x16 sqmm, 3x10 sqmm & balance all galvanised steel strip),extruded PVC Type ST2 sheathed,650/1100V grade as per IS 7098(Part 1) 1988 4CX16Sq.mm Cable RA-2 MR (PSR ITEAM BIODIVERSITY PARK)
90Supply of Power Cables,Solid Aluminum conductor up to 10 sqmm balance stranded conductor,XLPE Insulated,cores laid up, PVC tape innersheathed,unarmoured/Armour(Aluminium wire for single core up to 70 sqmm balance Aluminium strip, Glavanised wire for cables upto 2x16 sqmm, 3x10 sqmm & balance all galvanised steel strip),extruded PVC Type ST2 sheathed,650/1100V grade as per IS 7098(Part 1) 19883.5CX50Sq.mm Cable. RA-4 MR (PSR ITEAM BIODIVERSITY PARK)
91Supply of Power Cables,Solid Aluminum conductor up to 10 sqmm balance stranded conductor,XLPE Insulated,cores laid up, PVC tape innersheathed,unarmoured/Armour(Aluminium wire for single core up to 70 sqmm balance Aluminium strip, Glavanised wire for cables upto 2x16 sqmm, 3x10 sqmm & balance all galvanised steel strip),extruded PVC Type ST2 sheathed,650/1100V grade as per IS 7098(Part 1) 1988 3.5CX35Sq.mm Cable RA-3 MR ( PSR ITEAM BIODIVERSITY PARK)
92Supply of Power Cables,Solid Aluminum conductor up to 10 sqmm balance stranded conductor,XLPE Insulated,cores laid up, PVC tape innersheathed,unarmoured/Armour(Aluminium wire for single core up to 70 sqmm balance Aluminium strip, Glavanised wire for cables upto 2x16 sqmm, 3x10 sqmm & balance all galvanised steel strip),extruded PVC Type ST2 sheathed,650/1100V grade as per IS 7098(Part 1) 1988 3.5CX150Sq.mm Cable RA-5 MR ( PSR ITEAM BIODIVERSITY PARK)
93Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required., 4 X 10 sq. mm (25mm)
94Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required., Up to 35 sq. mm
95Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
96Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
97Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
98Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
99\\"Supply installing testing & commissioning of out door type street light feeder pillar (Distribution Panel) compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required with following incomming & outgoing as per detail below. Incoming 63 Amp. 10 KA FP MCCB 1 No. Suitable contractor and timer for down & dusk 100 Amp. TPN Alu. Bus bar Outgoing 32 Amp. 10KA FP MCB 2 No. 25 Amp. 10KA FP MCB 8 No. MR\\" (PSR BIODIVERSITY)
100Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. MR (PSR BIODIVERSITY)
101Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. MR (PSR BIODIVERSITY)
102Supply and fixing of LED Street light Fitting having die cast aluminium body Potted driver with 4+10KV SPD and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect. MR (PSR ITEM BIODIVERSITY)
103Supply and fixing of Aesthetically designed 60W LED Post Top light comprises of spun aluminium top cover, die cast aluminium heat sink, frosted polycarbonate diffuser and die cast aluminium mounting base arm set confirming to IP 65 and above protection complete in all respect including connecting copper wiring. Model No: PPTM02608R1 (Panasonic) MR (PSR ITEAM BIODIVERSITY)
104Supply & Erection of 3/4 meter long MS Decorative pole for above post top fitting with inbuilt junction box,MCB,sleeve in foundation and required wiring till fixture in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. MR (PSR ITEAM BIODIVERSITY)
105Supply, Installation, testing & Commissioning of Under Water lights of 9- 13Watts with IP68 Protection RGB Type complete in all respect item should be A1 category & approved by engineer in charge. MR (PSR ITEAM BIODIVERSITY)
106Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting jointing etc. in the existing trench, complete as required., 200 mm dia (CD-200 mm & ID-175 mm nominal)
107Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting jointing etc. in the existing trench, complete as required., 90 mm dia (CD- 90 mm & ID-76 mm nominal)
108Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting jointing etc. in the existing trench, complete as required., Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting jointing etc. in the existing trench, complete as required. 63 mm dia (CD-63 mm & ID-51 mm nominal)
109S/F of cable root marker MR (PSR ITEAM BIODIVERSITY)
110S/F of Shock treatment chart MR (PSR ITEAM BIODIVERSITY)
111S/F of LT/HT Danger Notice Plate MR (PSR BIODIVERSITY ITEM)
112Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required., Group C
113Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required., 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
114Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required., 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
115Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required., 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
116Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required., 2 Pair
117Supplying and drawing co-axial TV cable RG- 6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
118Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 25 mm
119Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
120Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required., Upto 450 mm sweep
121Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
122Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required., Group C
123Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
124Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltag, 6 way , Double door
125Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted includin, 8 way (4 + 24), Double door
126DELETED, Single pole
127DELETED, Triple pole and neutral
128Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as require, 40 A
129Supply of 8W Green Perform Sleek is a high performance low-height LED downlighter suited for requirements of any modern professional workspace. Robust PDC housing ensures long system. Narrow rim renders a pleasing aesthetic look. similar to Philips DN295B LED8S-6500 PSU WH or equivalent./MR (RA-1) (PSR BIODIVERSITY ITEAM)
130Supply of Totally enclosed exhaust fan, 300mm sweep continously rated highly efficient heavy-dutymotor similar to Crompton Cat. Ref. Trans Air 12\\" or equivalent./MR (RA-2) (PSR BIODIVERSITY ITEAM
131Supply & Installation of Wall fan with 400mm Sweep/MR (PSR BIODIVERSITY ITEAM)
132Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. CAT- AAA/1417 (PSR BIODIVERSITY ITEAM)
133\\"Supply of Recessed LED Downlighter ,made up of pressure die cast aluminum housing with high efficiency Prismatic PS diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level >=110 lumens/watt with Minimum system Lumens 2000 lm & max wattage 18W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM<=5), CRI Ra >=80, PF >0.9, an Operating working temp range - 0°C < Ta < 45°C & operating Voltage Range of 130- 320 V AC. Minimum Internal Surge Protection 2.5KV. The fixture design should be with flicker free operations ripple <5%, comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI/EMC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. Signify Cat. ref. no: DN296B LED20S PSU\\" (PSR SANSKRITI SCHOOL )
134Supply of LED Batten in 18W, 2000 lm, 4ft Extruded aluminum housing fitted with engg. Plastic end plates. Easy fit profiles acrylic diffuser provides smooth light distribution. LED populated on PCB comprising of cool White LEDs connected in series parallel. CCT- 6500K, THD<10%, driver efficacy>85%, surge protection 3KV, CRI>80, SDCM<5, power factor>0.95, efficacy 110lm/w. Driver: constant current output driver, operating range 140 – 270V AC supply voltages. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Signify cat. ref no: BN170 LED20S (PSR SANSKRITI SCHOOL)
135Supply of LED Tube Light with batten suitable for up to 1 X 10 watt LED tube light fitting including tube on Surface complete in all respect.(2ft) CAT- AAA (PSR SANSKRITI SCHOOL)
136Supply and fixing of Pendent /surface mounting having1' X 4' Size 40 to 45 Watt seamlessly intergrateds LED luminier with acrylic sheet diffuser and intergral electronic driver complete in all respect: Category AAA (PSR SANSKITI SCHOOL)
137\\"Supply of recessed mounted 2X2 LED panel ,made of CRCA housing with high efficiency PS Diffuser. LED Used shall be SMD type and fixture should have minimum efficacy at System level >=120 lumens/watt with Minimum system Lumens 4300 lm & Max System wattage of 35W, Life of fixture : 50000 burning Hrs. @ L70B50 Lumen maintenance,CCT-6500K, (SDCM<=5), CRI Ra >=80, THD<10%, PF >0.95, an operating Voltage Range of 140 - 270 VAC.Minimum Internal Surge Protection 4.0KV & IP20/IK02 protection, Fixture should comply with to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, IEC 60598-2-2, CISPER 15 for EMC / EMI compliance with flicker free operations ripple <5%. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. Signify Cat. no. RC380B LED42S PSU\\" (PSU SANSKRITI SCHOOL)
138Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required./1.35
139DISMANTLING OF O.P UNITS AND ITS T&P ( PSR ITEAM LAXMAN PARK)
140Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:, New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
141Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:, Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including Water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.
142Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
143Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour., Two coats.
144Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content., With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.
145Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). DSR No. 16.69
146Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.., Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
147Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:, G.S. Sheet
148Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
149Supply and fixing of 3 HP single phase open well submersible pump set of 50 mm x 50 mm pipe size complete with all material, labour T&P etc all as per direction of Engineer in charge. (make kirloskar/ crompton/KSB 26504.00
150Supply, Installation, laying & Commissioning of 63 mm outer dia 6 kg/cm2 HDPE pipe. 33.01 (jal nigam varansi SOR ) PSR
151Supply, Installation, laying & Commissioning of HDPE Flange with tail piece, packing & nut bolt complete in all respect.
152Supply, Installation, laying & Commissioning of ELBOW Joint 90 Degree for 90 mm HDPE pipe
153Supply, Installation, laying & Commissioning of ELBOW Joint 90 Degree for 63 mm HDPE pipe
154Supply, Installation, laying & Commissioning of reducer 90 mm to 63 mm outer dia 6 kg/cm2 HDPE pipe
155Supply, Installation, laying & Commissioning of TEE Joint 90 Degree for 90 mm HDPE pipe
156Supply, Installation, laying & Commissioning of 63 mm TAIL PIECES .
157Supply, Installation, laying & Commissioning of 90 mm TAIL Pieces HDPE Pipe.
158Supply, Installation, laying & Commissioning Pressure Gauge 2.5” size (Gyceryne)
1592” Disc Filter
1603” Disc Filter
161Supply, Installation, laying & Commissioning of TEE Joint 90 Degree for 63 mm HDPE pipe
162Thermos Temperature Controllers with switch and socket 2 mm cable
163Butt Belding electric heating plate
1642” CI butterfly Valve
1653” CI Butterfly Valve
166Providing & Fixing of Impact Pop up capable of delivering 0.32- 1.84lps with radius of coverage from 10 m to 12m at 2.0 - 4bar. The sprinkler shall be available with six (4) numerically coded nozzles with a trajectory of 26°. The sprinkler shall be adjustable in both part circle and a true full continuous 360° circle configuration. The adjustable part circle unit shall be minutely adjustable from 40° to 360°. The sprinkler shall have a top arc adjustment carried out by rotation of a flat blade screwdriver within the top cover. The sprinkler shall have an arc indication arrow on the top of sprinkler displaying the coverage pattern set. The sprinkler shall also have a friction-clutch mechanism to allow for 360°+ forward or reverse movement of nozzle turret without damage to the internal gear components. Sprinkler shall have a memory arc clutch feature to allow original arc pattern to be automatically resumed following disturbance to nozzle turret. The adjustable unit shall be adjustable in all phases of installation (i.e., before installation, after installation while static, and after installation while in operation). (PSR Biodiversity park)
167Providing & Fixing of Sprayer Pop up capable of delivering 0.32- 1.84lps with radius of coverage from 3 m to 5m at 2.0 - 3bar. The sprinkler shall be available with six (4) numerically coded nozzles with a trajectory of 26°. The sprinkler shall be adjustable in both part circle and a true full continuous 360° circle configuration. The adjustable part circle unit shall be minutely adjustable from 40° to 360°. The sprinkler shall have a top arc adjustment carried out by rotation of a flat blade screwdriver within the top cover. The sprinkler shall have an arc indication arrow on the top of sprinkler displaying the coverage pattern set. The sprinkler shall also have a friction-clutch mechanism to allow for 360°+ forward or reverse movement of nozzle turret without damage to the internal gear components. Sprinkler shall have a memory arc clutch feature to allow original arc pattern to be automatically resumed following disturbance to nozzle turret. The adjustable unit shall be adjustable in all phases of installation (i.e., before installation, after installation while static, and after installation while in operation). (PSR Biodiversity Park)
168Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level., All types of soil, 350 mm dia
169Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level., Rocky strata including Boulders, 350 mm dia
170WATER ARRANGEMENT CHARGES FOR DURING THE DRILLING (UPJN-2019-20- EP-(26)ATTACHED) ( PSR ITEAM LAXMAN PARK)
171Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge., 200 mm nominal size dia
172Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level., All types of soil, 300 mm dia
173Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
174Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :, Screened through sieve of I.S. designation 4.75 mm
175Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment).
176Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
177Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
178Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately), Holes 90 cm dia, and 90 cm deep
179Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Trees Plant
180Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge
181Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge.
182Providing and Displaying Ficus reginold well developed fresh & healthy foliage 60 to 75 cm spread 105 to 120 cm ht., Bushy in 35 cm Cement Pot as per direction of the officer-in- charge.
183Providing and Displaying Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-in- charge.
184Providing and Displaying Phoenix roebelenii palm well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per direction of the officer-in- charge.
185Providing and Displaying of Dieffenbachia superba, well developed, with 10-12 fresh, healthy and attractive leaves 45 cm to 60 cm ht. in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.
186Providing and stacking of Ophiopogon jaburan ( variegated ),full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.
187Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
188Mali 0140
189Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
190Supply & stacking Urea 40% Nitrogen @ 160 kg per acre (as per yard stick of CPWD LDA SOR 2018-19/11.1
191Supply & stacking DAP 50 kg per acre/year. LDA SOR 2018-19/11.2
192Supply & Stacking Bone Meal/ Oil Cake (LDA SOR Horti 2018-19/11.3) 50 kg per acre/Year
193Providing and Supplying of Black Neem Plant, having ht. 7-8 Ft well developed, fresh & healthy Leaves in 24 x 24 ich bag size or as per direction in Engineer-in-charge.
194Providing and Supplying of Oncoba Spinosa, having ht. 9 Ft well developed, fresh & healthy Leaves in 24 ich bag size or as per direction in Engineer-in-charge.
195Providing and Supplying of Eugiena Miniature, having ht. 9 Ft well developed, fresh & healthy Leaves in 24 ich bag size or as per direction in Engineer-in-charge.
196Providing and Supplying of Dillenia Philippines, having ht. 7 Ft well developed, fresh & healthy Leaves in 24x24 ich bag size or as per direction in Engineer-in-charge.
197Providing and Supplying of Erythrina Vespertilio, having ht. 14 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
198Providing and Supplying of Chinese Flame Tree, having ht. 8 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
199Providing and Supplying of Ficus Infectoria, having ht. 18 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
200Providing and Supplying of Portlandia Grandiflora, having ht. 5 Ft well developed, fresh & healthy Leaves in 18 inch Pot size or as per direction in Engineer-in-charge.
201Providing and Supplying of Operculicarya Decaryi, having ht. 7 Ft well developed, fresh & healthy Leaves in 21x21 inch bag size or as per direction in Engineer-in-charge.
202Providing and Supplying of Thai King Champa Plant - Hari Champa, having ht. 8 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer- in-charge.
203Providing and Supplying of Jacaranda Dwarf, having ht. 8 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
204Providing and Supplying of Lagerstroemia Black Diamond, having ht. 9 Ft well developed, fresh & healthy Leaves in 21x21 inch bag size or as per direction in Engineer- in-charge.
205Providing and Supplying of Weeping Willow (Brad Leaf), having ht. 9 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
206Providing and Supplying of Petrea Volubilis, having ht. 10 Ft well developed, fresh & healthy Leaves in 24 inch Pot size or as per direction in Engineer-in-charge.
207Providing and Supplying of Calabash Tree, having ht. 7 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
208Providing and Supplying of Calabash Tree (verigated), having ht. 8 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
209Providing and Supplying of Pachira Aquatica Tree, having ht. 14 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
210Providing and Supplying of Uncarina - Purple, having ht. 8 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
211Providing and Supplying of Clusia Rosea, having ht. 15-18 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
212Providing and Supplying of Clitoria Racemosa, having ht. 10 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
213Providing and Supplying of Beaumontia Grandiflora, having ht. 8 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
214Providing and Supplying of Gustavia Superba, having ht. 8 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
215Providing and Supplying of Tabebuia Chrysusotricha, having ht. 18 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer- in-charge.
216Providing and Supplying of Kopsia Fruticosa - Pink, having ht. 7 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
217Providing and Supplying of Barnebydendron Riedelii, having ht. 18 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
218Providing and Supplying of barringtonia acutangula, having ht. 12 Ft well developed, fresh & healthy Leaves in 50x50 inch bag size or as per direction in Engineer-in-charge.
219Providing and Supplying of Ironstone Plant, having ht. 8 Ft well developed, fresh & healthy Leaves in 21x21 inch bag size or as per direction in Engineer-in-charge.
220Providing and Supplying of Chinese Frangnance Tree, having ht. 5 Ft well developed, fresh & healthy Leaves in 21x21 inch bag size or as per direction in Engineer- in-charge.
221Providing and Supplying of Combretum rotundifolium, having ht. 7 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
222Providing and Supplying of Melaleuca Viminalis, having ht. 12 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
223Providing and Supplying of Cerbera Odollam White Verigated, having ht. 7 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer- in-charge.
224Providing and Supplying of Strophanthus Gratus, having ht. 5 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
225Providing and Supplying of Yellow Gardenia Flower, having ht. 7 Ft well developed, fresh & healthy Leaves in 21x21 inch bag size or as per direction in Engineer-in-charge.
226Providing and Supplying of Vrindavan Champa Plant, having ht. 18 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer- in-charge.
227Providing and Supplying of Texas Sage, having ht. 7 Ft well developed, fresh & healthy Leaves in 30x30 inch bag size or as per direction in Engineer-in-charge.
228Providing and Supplying of Colvillea Racemosa, having ht. 18 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
229Providing and Supplying of Brachychiton Australis Plant, having ht. 18 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer- in-charge.
230Providing and Supplying of Calliandra New Pink, having ht. 10 Ft well developed, fresh & healthy Leaves in 21x21 inch bag size or as per direction in Engineer-in-charge.
231Providing and Supplying of Schleichera (Kusum Tree) having ht. 10 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
232Providing and Supplying of Krishna Ficus, having ht. 10 Ft well developed, fresh & healthy Leaves in 21x21 inch bag size or as per direction in Engineer-in-charge.
233Providing and Supplying of Erythrina × Bidwillii having ht. 10 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
234Providing and Supplying of Cochlospermum Religiosum, having ht. 14 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
235Providing and Supplying of Pseudobombax Ellipticum, having ht. 10 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
236Providing and Supplying of Cassia Javanica, having ht. 9 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
237Providing and Supplying of Barringtonia Asiatica, having ht. 14 Ft well developed, fresh & healthy Leaves in 30x30 inch bag size or as per direction in Engineer-in-charge.
238Providing and Supplying of Bauhinia New White, having ht. 10 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
239Providing and Supplying of Pong Pong Plant, having ht. 18 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
240Providing and Supplying of Magnolia Grandiflora, having ht. 7 Ft well developed, fresh & healthy Leaves in 30x30 inch bag size or as per direction in Engineer-in-charge.
241Providing and Supplying of Cordia White, having ht. 10 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
242Providing and Supplying of Adansonia Grandidieri, having ht. 12 Ft well developed, fresh & healthy Leaves or as per direction in Engineer-in-charge.
243Providing and Supplying of Lagerstroemia Twilight, having ht. 9 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
244Providing and Supplying of Australian Flame Tree, having ht. 7-9 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
245Providing and Supplying of Rainbow Eucalyptus Tree, having ht. 10-12 Ft well developed, fresh & healthy Leaves in 30x30 inch bag size or as per direction in Engineer- in-charge.
246Providing and Supplying of Australian Bottle Tree, having ht. 8-10 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
247Providing and Supplying of Brazilian Tower Plant, having ht. 10-12 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
248Providing and Supplying of Melaleuca Australia Tree - Red (Melaleuca Viminalis), having ht. 10-12 Ft well developed, fresh & healthy Leaves in 30x30 inch bag size or as per direction in Engineer-in-charge.
249Providing and Supplying of Melaleuca Australia Tree - White (Moonah Paperbark), having ht. 10-12 Ft well developed, fresh & healthy Leaves in 30x30 inch bag size or as per direction in Engineer-in-charge.
250Providing and Supplying of Donal Smith Yellow Plant (Tabebuia Donnell-Smithii), having ht. 12-14 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
251Providing and Supplying of Brownea Grandiceps, having ht. 10-12 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer- in-charge.
252Providing and Supplying of Saraca Thaipingensis Yellow, having ht. 12-14 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer- in-charge.
253Providing and Supplying of Colvillea Racemosa, having ht. 12-14 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
254Providing and Supplying of Cletoria Resimose Plant, having ht. 10-12 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
255Providing and Supplying of Cassia Fistula White, having ht. 14-16 Ft well developed, fresh & healthy Leaves in 30x30 inch bag size or as per direction in Engineer-in-charge.
256Providing and Supplying of Cassia Fistula Rainbow, having ht. 14-16 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
257Providing and Supplying of Barringtonia Racemosa, having ht. 12-14 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
258Providing and Supplying of Delonix yellow, having ht. 9-10 Ft well developed, fresh & healthy Leaves in 24x24 inch bag size or as per direction in Engineer-in-charge.
259Providing and Supplying of Melaleuca Paper Burg Tree, having ht. 12-14 Ft well developed, fresh & healthy Leaves in 30x30 inch bag size or as per direction in Engineer-in-charge.
260Providing and Supplying of Brachychiton Discolor, having ht. 16-18 Ft well developed, fresh & healthy Leaves in 35x35 inch bag size or as per direction in Engineer-in-charge.
261Providing and Supplying of Bougainvillea Plant conical shape having ht. 8 Ft well developed, fresh & healthy Leaves in 25 inch bag size or as per direction in Engineer-in- charge.
262Providing and Supplying of Microcarpa Plant well developed conical shape height 10-12 feet in 30 inches bag or as per direction of officer in-charge.
263Providing and stacking of Asia loropetalum of height 10 ft to 12 ft. in big poly bags of size 30 inch as per direction of the officer-in-charge.
264Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
265Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
266Rough dressing the trenched ground including breaking clods.
267Fine dressing of the ground.
268Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in- charge. The rate includesmaking necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.
269Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of, 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
270Making khurras 45x45 cm with average minimum thickness of5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
271Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm. DSR 2023, Code 11.41A.3.1
272Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
273Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R- 2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage., For vertical surface two coats @ 0.70 kg per sqm
274Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R- 2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage., For horizontal surface one coat @1.10 kg per sqm. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58463960
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 26-11-2026
Authority
Authority Name Lucknow Development Authority
Work Description Tender for Complete Development Work Of Gomti Biodiversity Park In Gomti Nagar Yojana In Phase 02, Construction Of Boundary Wall, Interpretation Center, Pathway Trail, Name Wall, Drain Cover And Modernization Work.
Basic Detail
Tender No 134/ENIVIDA/CE/2026/002
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 10 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 8000
EMD 20.95 Lakhs
Exemption Not Available
Document List
7356becd-9b42-4c98-b837-ca6600e6884c.html
BOQ_2290020.xls
SBD134_02.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

7356becd-9b42-4c98-b837-ca6600e6884c.html

xls

BOQ_2290020.xls

pdf

SBD134_02.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender