Housing Urban and Rular Development Local Bodies Closing in 1 days TDR #58463775

Tender For maintenance of Park (Renovation Of Footpath, Toilet Block, Guard Room & Gazebo Huts In City Park Sector-93) Noida

Issued by Local Bodies · Ghaziabad, Uttar Pradesh
Tender Value
1.43 Crore
Estimated cost
Bid Submission
24 Nov 2026
1 days left
EMD
3.36 Lakhs
Bank guarantee accepted
Document Fee
5310
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for maintenance of Park (Renovation Of Footpath, Toilet Block, Guard Room & Gazebo Huts In City Park Sector-93) Noida

BOQ

Name of Work:- M/o Park (Renovation of footpath, toilet block, guard room & Gazebo huts in City Park sector-93) NOIDA
Sl. No. Item Description
1Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. Nominal concrete 1-3-6 or richer mix life couivalent desien mix)
2Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar
3Earth work in excavation by mechanical means (Hydraulic excavator/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. The contractor has detect different utilities like sewer Ine, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer-in-charge. (DSR Code No.2.8.1)
4Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size)
5Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5 m.
6Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand)
7Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement: 4 coarse sand) DAR Code 641
8Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement All work up to plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
9Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railines brackets dates and similar works
10Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1112 mm cement plaster of mix:1:4 (1 cement: 4 coarse sand)
1240 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), including pointing with cement mortar 1:2 (1) cement: 2 stone dust) with an admixture of pigment to Imatch the shade of stone Red sand stone
13Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips /c 12 mm thick bed of cement mortar 1:3 (1 Cement 3 coarse sand) Uc ruled pointing in cement mortar 12 (1) white cement 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.
14Providing and fixing carbon steel galvaised (minimum coating 5 micron) dash fastner of 10mm dia double threaded 68 grade (veild strength 480 M/mm2) Counter sunk head. comprising of 10 m dia polyamide PA 6 grade sleeve. Including drilling of hole in frame concrete/masonary etc. as per direction of Engineer in charge. 10 x 120 mm
15Providing wall putty on old surface with approved quality material of Berger/JK/Birla or similar make 2 coats
16Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer annlied @2 20 ke/10 sqm
17Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade One or more coats on old work
18Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1:2:4 (1 cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size) 048 Code 41
19Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator vacuum dewatering process and finally finished by floating. brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note: Cement content considered in this item is @ 330 kg/cum Excess/less cement used as per design mix is payable/ recoverable separately).
20Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar) 4(1cement: 4 coarse sand) and finished neat complete. (DSR Code No. 12.20) AOR
21Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile).. UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension ie in depth & width of profile shall be acceptable. Fixed window/ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
22Disposal of building rubbish/malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer in charge, beyond 50 m initial lead, for all leads including all lifts involved.
23Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting. fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special complete
24Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1) cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50
25Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work
26Providing corrugated G.S. Sheet roofing include vertical/curved surface fixed with polymer coated or L hooks, bolts and nuts 8 mm diameter with bituman and G.1. limpet washers or with G.1. limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paints on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to sizeand shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m2
27Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade Two or more coats on new work.
28Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
29Providing and fixing wash basin with CI. Brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereever require White Vitreous China Flat back wash basin size 550 x 400 mm with single 15mm C.P. brass pillar tap
30Providing and fixing white vitreous china flat back half stall urinal of size 580 x 380x350 mm with white P.V.C automatic flushing cistern, with fittings, standard size C.P brass flush pipe, spreaders with unions and clamps (all in C.P brass) with waste fitting as per IS: 2556, C.I trap with outlet grating and other coupling in CP brass including painting of fittings and cutting and making good the walls and floors whereever required Range of two half stall urinals with 5 litre P.V.C automatic flushing cistern
31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
32Providing and fixing PTMT angle stop cock 15mm nominal bore weighting not less than 85gms.
33Providing and fixing PTMT Bottle Trap for Wash basin: Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
34Providing and fwing 8 mm dia CP/SS Jet with flexible tube upto 1 meter long with 55 triangular plate to European type W.C of quality and make as approved by Engineer in charge
35Providing and fixing PIMT grating of approved quality and colour Circular/square type 100 mm nominal dia/size
36Providing and fixing soil, waste and vent pipesCentrifugally cast (spun) iron socket & Spigot (5 & 5) Pipe as per IS : 3989
37Providing and fixing MS. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 X10X 10 cm of 1:24 mix (1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) including cost of cutting
38Providing and fixing plain bend of required degree 100mm dia sand cast iron S & S as per 1S:3989
39Providing and firing single equal plain junction of required degree 100mm sand cast iron S& S as per 1S: 3989
40Providing and fixing terminal guard 100mm dia sand cast iron 1S&S as per 1S:3989
41Providing lead caulked joints to sand cast iron/centrifugallly cast (spun) iron pipes and fittings of diametre: 100mm dia
42Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100mm inlet and 100mm outlet sand cast iron S& S as per IS:3989
43Providing and fixing on wall face unplaqsticised PVC rain water pipes confirming to 1S: 13592 TYPE A, including jointing with seal ring confirming to 1S: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm diameter
44Providing and placing on terrace (at all floor levels) polyethylene water storage tank, 1S 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support of tank
45Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes
46Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes
47Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement 4 coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.. complete. Size of Tile 500x500 mm
48Providing and fixing Ist quality ceramic glazed wall tiles conforming to 15: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
49Supply of Tractor with trolley Complete at site on hire basis including cost of diesel and driver etc. complete in all respect as per direction of engineer in charee
50Supply of Labour complete in all respect as per direction of engineer in charge.
51S/F Gemtrack cast Iron bench made up of 13 MS square tubes (50mmx25mm) in length of 1500 MM size plan stand/Legs Gemtrack Thickness of Stand/Leg-22mm Bench type-Interated seat and back weight bearing capacity in Kg-170 Minimum weight of cast iron-22 minimum weight of square tubes (in Kg)-12 Total Height 10 mm 600 mm from ground level width 10 mm-400 mm Seat height + 10 mm 355 mm from groun level Total area required 10mm 1410mmx710mm Colour of stand, Black Colour Cast iron support finish coated with a rust high bidding paint 01 year warranty Self Propelled Tree Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58463775
AUTHORITY Local Bodies
TENDER VALUE 1.43 Crore
LAST DATE 24-11-2026
Authority
Authority Name New Okhla Industrial Development Authority
Work Description Tender for maintenance of Park (Renovation Of Footpath, Toilet Block, Guard Room & Gazebo Huts In City Park Sector-93) Noida
Basic Detail
Tender No 48/D(H)/DD(H)-III/2026-27
Bidding Type Tender
Location
City Ghaziabad
State Uttar Pradesh
Key Dates
Publish Date 10 Nov 2026
Submission Date 24 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 1.43 Crore
Tender Fee 5310
EMD 3.36 Lakhs
Exemption Not Available
Document List
1f44799d-62bd-4b1d-bce0-dbf973934019.html
BOQ_2289646.xls
Capability.xls
td483.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

1f44799d-62bd-4b1d-bce0-dbf973934019.html

xls

BOQ_2289646.xls

xls

Capability.xls

pdf

td483.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender