Tender For Construction Work Of Interlocking And Covered Drain From Vijay Kant Singhs House In Gram Panchayat Gosalpur To Gadahi Via Jagat Singhs House.
Tender Value
4.26 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
7 days left
EMD
8520
Bank guarantee accepted
Document Fee
677
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghazipur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Interlocking And Covered Drain From Vijay Kant Singhs House In Gram Panchayat Gosalpur To Gadahi Via Jagat Singhs House.
BOQ
| Sl. No. | Item Description |
| 1 | Scarping refuse as old white or color wash including disposal of distance of 60 directed meter by Enginner- in-charge within a (200 feet) SI. No. 708 |
| 2 | Dismantling as directed existing plaster including disposal of refuse by Engineer-in-charge 60 meters(200 within a distance of feet) S.I. 706 |
| 3 | Dismantling cement concrete or brick or granolithic floors dismantled including base concrete and including stacking of materials as driected by Engineer - in chargewithin a distance of 60 meters (200 feet) SI. No. 697 |
| 4 | Excavation in foundation in ord inary soil including lift upto 1.50 M and lead upto 30M. Including watering ramming and dressing etc. and disposal of surplus earth as upto a distance of 30 M. from the foundation trenches.etc.required for proper completion of the work. SI.No.251. |
| 5 | Concrete with 4 cm gauge brick ballast Coarse sand of 2.25 F.M and cement in proportion of 1:4:8 in foundation and under floor including supply of all materials labour T & P etc. required for proper completion of the work. S.I.No.275 |
| 6 | R.C.C work with cement approved coarse sand and 2 cm. Gauge approved dalla grit proportion of 1:2:4 in R.C.C foundation S.I. No. 288 |
| 7 | M-150 brick work in 1:4 cement & F sand in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I.No. 305(b) |
| 8 | R.C.C work with cement approved coarse sand and 2 cm. Gauge approved dalla grit proportion of 1:2:4 in R.C.C Pillor S.I. No. 288 |
| 9 | Mild steel iron in plain work such as in reinforced concrete or rein force brick work wrought to required shape as necessary cutting. bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured required to proper completion of the work S.I.No. 504 |
| 10 | M- 150 brick work in 1:4 cement & F sand in super structure including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I.No. 305(b), 309, 310 & 310a |
| 11 | 12 mm thick plaster on Plain surface of wall with cement mortar consising of 1 part cement and 4 part of approved coarse sand. Minimum thickness not to be less then 10 mm including supply of all materials, labour and S.I.No. T & P etc. required for completion of work. as per 584 |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. CPWD 11.41.1 (Size of Tile 600x600 mm) |
| 13 | Supply and fixing 6 mm. china white glazed tiles tiles in flooring or in skiring or Dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required of proper comletion of work. as per S.I.No. 628 |
| 14 | Mild steel or iron work in heavy sizes such as trusses,built up gates, record racks, roof work, gates etc wrought to required form, including drilling holes rivetting or welding where necessary & their fixing. required for proper completion of the work. as per S.I.No. 503 |
| 15 | Supply & fixing of Flush Doors commercial quality confirming to I.S. 2202 Part 1 (1983) as per S.l. No. 470 ==35 mm thick Shutters D |
| 16 | 32 mm thick double leaf shutters W,V |
| 17 | Approximate cost of oxidised Iron fitting ISI Marked only. Materials Chapter 01 (SI.No. 16) (A). I.S.I. Marked Oxidised Iron Tower Bolt 10 mm dia 300 mm long (D) |
| 18 | 10 mm dia 200 mm long (W) |
| 19 | (B). I.S.I. Marked Alluminium Iron Sliding Bolt 16 mm dia 300 mm long (D) |
| 20 | (C). I.S.I. Marked Oxidised Iron Door Handle 10 mm dia 150 mm long (D) |
| 21 | 10 mm dia 100 mm long (W) |
| 22 | (D). MISL. FITTINGS I.S.I. marked iron Hinges 100 mm long (D) |
| 23 | I.S.l. marked iron Hinges 75 mm long (W) |
| 24 | Iron screws 25 mm |
| 25 | Iron screws 30 mm |
| 26 | Painting or varnishing new iron works in small areas or newwood with one coat (upto one sqmmetree) of ready mixed priming painting and one coat of approved superiorquality ready mex paint (2nd quality synthetic enamel paint, shalimar,Asian or equivalent as approved by labour, E/l) T or & VArnish including supply of allmaterials, etc. required for materials, labour T & Petc. required for proper completion of the work Paint ot be used should confirm the I.S.I. No. 103-1950. as per S.I.No. 641-642 |
| 27 | Oné priming coat of cement primer and one coat dry distemper on new work including labour and T supply of all materials, & P etc. as per S.I.No. 649 & 650 |
| 28 | Finishing make wall with water proof cement paint of approved and quality on new work with two coat to give anT even & P shade etc.including supply of all materials labour and as per S.I.No.660 & 661 |
| 29 | S/F of Signboard and photography |
| 30 | Providing (CPVC) pipes, and fixing Chlorinated Polyvinyl Chloride having thermal stability for hot & cold water fittings, supply, including all CPVC plain & brass threadedspacing. including This includes fixing the pipe with clamps at 1.00 m one step CPVC jointing of pipes & fittings with complete solvent cement and testing of jointsChapteras per direction of Engineer in Charge. December. 20 2020 item no. 1 (DAR 15 mm nominal outer dia pipes |
| 31 | 25 mm nominal outer dia pipes |
| 32 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore Chapter- 20 item no. 1 (DAR 18.15.1) |
| 33 | Providing and fixing brass stop cock of approved quality: 15 mm nominal bore Chapter- 20 item no. 1 (DAR 18.16.1) |
| 34 | Providing and fixing gun metal gate valve with C.I. wheelof approved quality (screwed end): 25 mm nominal boreChapter- 20 item no. 1 (DAR 18.17.1) |
| 35 | Providing and fixing water closet squatting pan (Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. as per DAR 17.1.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender