Housing Urban and Rular Development Government Departments Closing in 0 days TDR #58463420

Tender For Work Of Widening And Strengthening Of The Road Till New Karchana Station Built By Dfccil In Km 0-02 Of Masika Ghoghapur Road. (Chainage 0.000 To 2.200)

Issued by Government Departments · Prayagraj, Uttar Pradesh
Tender Value
4.15 Crore
Estimated cost
Bid Submission
20 Nov 2026
0 days left
EMD
8.31 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Work Of Widening And Strengthening Of The Road Till New Karchana Station Built By Dfccil In Km 0-02 Of Masika Ghoghapur Road. (Chainage 0.000 To 2.200)

BOQ

Name of Work:- मसिका घोघापुर मार्ग के किमी0-02 में डी0एफ0सी0सी0आई0एल0 द्वारा निर्मित न्यू करछना स्टेशन तक मार्ग के चौड़ीकरण एवं सुदृढ़ीकरण का कार्य। (चैनेज 0.000 से 2.200)
Sl. No. Item Description
1Excavation in Soil using Hydraulic Excavator and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. As per MoRTH specification clause No. 301
2Construction of Embankment with Material Deposited from Roadway Cutting Construction of embankment with approved material obtained from right of way with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As per MoRTH specification clause No. 305(3.17)
3Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. As per MoRTH specification clause No. 305(3.18)
4Scarifying Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all lifts and leads upto 1000 metres. As per MoRTH specification clause No. 305.4.3
5Granular Sub-Base with Graded Material (Table:- 400-1) Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete As per MoRTH specification clause No. 401
6Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MoRTH specification clause No. 406(1.14)
7Prime coat Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MoRTH specification clause No. 502
8Dense Graded Bituminous Macadam Grading 2 Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction As per MoRTH specification clause No. 505
9Tack coat Providing and applying tack coat with bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. As per MoRTH specification clause No. 503
10Bituminous Concrete Providing and laying bituminous concrete with 100 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects
11Cement Concrete Pavement(M-35) Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 422 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per MORTH specification clause No. 602 complete in all respects
12Providing and Laying Interlocking Concret Block Pavement having thickness 80 mm as per drawing and Technical Specifiaction Clause 1500 of MORD Specification.
13Providing and Relaying Interlocking Concret Block Pavement having thickness 80 mm as per drawing and Technical Specifiaction Clause 1500 of MORD Specification.
14Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. As per MoRTH specification clause No. 304
15Sand Filling Sand/Blancket coat Sand filling in foundation trenches and in full formation drainage layer/Blancket coat in black cotton soil of road. As per MORD Technical Specification
16PCC 1:3:6 in Foundation Plain cement concrete 1:3:6 (Cement OPC-43 grade) nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. As per MoRTH specification clause No. 2100
17Stone masonary.Stone Masonry Work in Cement Mortar 1:3 in Foundation complete as per Drawing and Technical Specifications. As per MoRTH specification clause No. 12.7
18R.C.C. grade M 20 Plain/Reinforced Cement Concrete(Cement OPC-43 grade) in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M20 using batching plant transit mixer & Concrete pump. As per MoRTH specification clause No. 12.8
19Reinforcement work(Substructure) Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications. As per MoRTH specification clause No. 1600 & 2200
20Pointing Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications. As per MoRTH specification clause No. 1300 & 2200(13.2)
21Plastering Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications. As per MoRTH specification clause No. 1300 & 2200(13.3)
22Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
23Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8
24Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . 600 mm
25TRAFFIC SIGNS - (as per IRC:67-2012). Providing and fixing of retro-reflectorized cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminum sting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (as per IRC:67-2012 clause 14.60)
26Supply, fixing & reaction of built up Cantilever Structure 6 m span Comprising of one vertical post of 6.00 M height made up of 300 mm NB heavy class MS Pipe as vertical member wide with 10 mm MS plate at top & 12 mm M.S. Plate at bottom. The horizontal Truss shall comprise of 50 mm Dia heavy class M.S. pipe and 40 mm Dia heavy M.S. pipe as bracing & 10 mm M.S. plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and tow coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick lean concrete in 1:3:6 cement, coarse sand and 40 mm gauge stone ballast RCC with and 1:2:4 cement, coarse sand and 20 mm stone grit including supply and fixing of 25 mm Dia foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The latest vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 compete in all respect. The Rates shall include cost of design fabrication, supply, transportation, local shifting, Erection of Signage structure using crane, inclusive of all taxes etc. all T&P etc. machine, material and labour required for proper completion of work as per direction of E/I.
27Reflective Raised Pavement Markers (Cat Eye/Road Stud)Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be molded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High-Impact Polystyrene) or Acrylonitrile Butadiene Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. Lenses shall be mauled of methyl methacrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two-year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer In addition a two-year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who comes out the work of fixing of reflective road markers. In case the markers are displaced, damaged, get worn out or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. RPM (With Shank) As per SOR LKO 2020-21 (Page No. 54 and Item No.- 05)
28Supply & Erection of built up overhead structure 18.00 M to 20.00M span comprising of three vertical post of 6.00 M high made up of 350 mm N.B. Havey class M.S. pipe as vertical member welded with 10mm M.S. plate at top & bottom for bearing of horizontal frame comprising of 65 mm. N.B. made Havey class main pipe as of 42 mm class medium N.B. pipe bracing as per approved designed drawing with one coat of steel primer and two coats of synthetic enamel paint complete the work includes construction of RCC foundation of size 0.90x0.90M & 1.5 M deep for built up Overhead Structure including earth work in excavation , 100 mm thick Lean Concrete in 1:4:8 cement , course sand and 40 mm gauge stone ballast , RCC with 1:2:4 cement , Course sand and 20 mm stone grit including supply of grouting of 25 mm Dia foundation bolts (600mm long) as per provision of structure including cost of reinforcement & shutting as per direction of Engineer in Charge .
29Providing and Applying Hot applied thermo- plastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gm /sqm area. Thickness of 2.5 mm is excusive of surface applied glass beads as per IRC 35. The finish surface to be leveled uniform and free streaks and holes. Composition of thermo-plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of all material labour T&P etc required for proper completion of work as directed by E/I. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58463420
AUTHORITY Government Departments
TENDER VALUE 4.15 Crore
LAST DATE 20-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Work Of Widening And Strengthening Of The Road Till New Karchana Station Built By Dfccil In Km 0-02 Of Masika Ghoghapur Road. (Chainage 0.000 To 2.200)
Basic Detail
Tender No 3945/10Com(P)-PRJ.CIRCLE/2026 DATED 25.08.2026
Bidding Type Tender
Location
City Prayagraj
State Uttar Pradesh
Key Dates
Publish Date 09 Nov 2026
Submission Date 20 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 4.15 Crore
Tender Fee 2714
EMD 8.31 Lakhs
Exemption Not Available
Document List
a394926a-236e-48ab-ae5b-f1bbafe38e8f.html
BOQ_2288960.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

a394926a-236e-48ab-ae5b-f1bbafe38e8f.html

xls

BOQ_2288960.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender