Defence Statutory Bodies & Commissions/Committees Closing in 14 days TDR #58462932

Tender For Addition/Alteration To Building No. P-909, Provn Pol Store And Provn Of Exhaust Fans In Otm At Afs Hasimara

Issued by Statutory Bodies & Commissions/Committees · Jalpaiguri, West Bengal
Tender Value
25.10 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
14 days left
EMD
50200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Addition/Alteration To Building No. P-909, Provn Pol Store And Provn Of Exhaust Fans In Otm At Afs Hasimara

BOQ

Name of Work:- ADDN/ALTN TO BUILDING NO. P-909, PROVN POL STORE AND PROVN OF EXHAUST FANS IN OTM AT AFS HASIMARA
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority:GE (AF) HASIMARA Name of Work : ADDN/ALTN TO BUILDING NO. P-909, PROVN POL STORE AND PROVN OF EXHAUST FANS IN OTM AT AFS HASIMARA Contract No: GE/HAS/ /2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE 'A' (BoQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Dismentaling of plain or corrugated galvalume sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed.
3Refixing of serviceable pre painted galvalume corrugated steel sheet of any thickness as in roof covering /cladding to wall fixed with self tapping screws and washers, complete all as specified and directed.(Note : Serviceable sheets obtained from dismantling shall be re-used)
4S&F of pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.
5S&F of pre painted galvatume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.
6S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410W (Gde E-250) quality A, complete all as specified and directed.
7M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed.
8M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions, finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately as 'supply only'.)
9Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.
10M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over and including a coat of alkali resistance primer, complete all as specified
11M&L for preparation of newly plastered surfaces of wall and applying two coats of 100% premium acrylic weather proof exterior emulsion paint, alkali & fungal resistance, approved colour and shade (pattern deep green/camouflage), over and including a primming coat of exterior emulsion primer as per manufacturer's instructions, complete all as specified and directed.
12Demolition of brick work or sone/boulder masonry, built in cement mortar including all quoiins, pillars etc, separation of serviceable materials from the unserviceable, stacking the serviceable materials, complete all as specified and directed.
13M&L for brick work with sub class 'B' bricks, old size, burnt clay bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:4), complete all as specified and directed.
14All as per item No. 12.00 here-in-before but except bricks, complete all as specified and directed. Note - Bricks obtained from demolition shall be re-used.
15M&L for preparation of new steel & Iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.
16S&F of 110mm bore size, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes and fittings, complete all as specified and directed.
17S & F 110mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.
18Cutting holes in brick walls built in CM for inserting hold fasts and making good dismantled portion in CM (1:3) or PCC (1:2:4), type B-1 (using 12.5mm graded crused stone aggregate) as in depth of embedded portion of hold fast n. exc. half brick, complete all as specified and directed.
19M & L for 40mm thick PCC (1:2:4), type B-1, (using 12.5mm graded crushed stone aggregate), as in flooring and paving etc, complete all as specified and directed.
20M & L for 150mm thick PCC (1:4:8), type B-2, (using 40mm graded crushed stone aggregate), as in sub floor, sub base, floor and pavings etc, complete all as specified and directed.
21M & L for 100mm thick PCC (1:5:10), type D-2, (using 40mm graded crushed stone aggregate), as in sub floor, sub base, floor and pavings etc, complete all as specified and directed.
22Surface dressing not exceeding 15cm deep in soft/loose soil including site clearance, complete all as specified and directed.
23Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, shafts, wells cess pits, manholes, pier holes etc. and n.exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.
24Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.
25Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil, complete all as specified and directed.
26M & L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.
27M&L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.
28M&L for RCC (1:1.5:3) (nominal mix) type A-1, (using 20mm graded crushed stone aggregate) as in beams, contilevers, lintels over 1.5m span etc, complete all as specified and directed.
29M&L for RCC (Nominal mix) (1:1.5:3) type B1 (using 20mm graded crushed stone aggregrate) as in slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
30M&L for RCC (1:1.5:3) (nominal mix) type A-1, (using 20mm graded crushed stone aggregate) as in chajja, complete all as specified and directed.
31Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. and finished rough surfaces of concrete flat, complete all as specified and directed.
32Use and waste of formwork to sides and soffits of suspended slabs such as roof slabs, landings and similar work, n. exc. 200mm thick (horizontal or sloping), complete all as specified and directed.
33Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, complete all as specified and directed.
34M&L for mild steel TMT bars 10mm dia and over (not less than Fe 500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
35M&L for mild steel TMT bars 6 to 8mm dia and over (not less than Fe 500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
36M&L for machine cut kota stone slab flooring and shelves, 20-25mm thick, laid over and including cement screed bed/bedding layer of 20mm thick, in CM (1:6), laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.
37M&L for sand filling under floors or in foundations or below paver block etc. including watering and consolidation, complete all as specified and directed.(Note : Consolidation thickness shall be measured for payment.)
38M&L 50mm thick PCC (1:2:4) type B-2, (using 40mm graded stone aggregate) as in floor and paving etc, complete all as specified and directed
39M&L 75mm thick PCC (1:4:8) type B-2, (using 40mm graded stone aggregate) as in sub floor, sub bases and paving etc, complete all as specified and directed
40M&L 75mm thick PCC (1:3:6) type B-2, (using 40mm graded stone aggregate) as in sub floor, sub bases and paving etc, complete all as specified and directed
41M&L for hardcore of gauge exceeding 63mm but not exceeding 100mm using broken stone or boulders, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.(Note : Compacted thickness shall be measured for payment.)
42M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.
43M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) window/ventilator with frame comprising of 3 track sliding shutter made out of aluminium extruded section of bottom frame of weight not less than 1.174 Kg/RM, top and side frame of weighing not less than 0.423 Kg/RM, top and bottom rail of shutters of weighing not less than 0.368 Kg/RM, in two pannels and shutter with and including 5mm thick selected quality tinted glass & third one with and including stainless steel wire mesh and overall aluminium decogrill, as approved by GE, fixed with standard aluminium channel outside, with and including handles, cleat, glazing clip, special auto lock, dry set rubber gasket, complete all as specified and directed.
44S&F for 605 x 605mm GI frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, hanger with 4-6mm dia GI (length as required) adjusting level fixed to roof slabs/truss by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expension hold fast evers 12.5mm dia 40mm long including providing 4mm thick fibre cement designer board, fixed or laid/inserted to GI framework with screws, 60cm x 60cm in size, complete all as specified and directed.
45M&L 35mm thick 2nd class hardwood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particale board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as specified and directed.
46S&F 105 x 60mm size factory made pressed steel frames for doors, made out of 1.00mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
47S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
48S&F 100mm size long MS butt hinges, medium weight, cold rolled, complete all as specified and directed.
49S&F 200mm long aluminium anodised tower bolt of extruded section, complete all as specified and directed.
50S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.
51S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
52M & L for flameproof point wiring surface/concealed type with 1.5 Sqmm (nominal cross sectional area) with PVC insulated unsheathed single core stranded copper conductor (ZHFR/HFFR) cable of working voltage 1100 volts grade conforming to IS-694 drawn in and including steel surface conduit with all fittings & accessories such as FLP flexible conduit, FLP junction box, Brass glands/connector, bends etc. with 1.60 mm thick pressed steel or mild steel sheet sunk box, including 1.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed single core stranded copper conductor (ZHFR/HFFR) cable as earth continuity conductor connected to main switch/ 'DB's or common earth dolly for one fan/light point controlled by one 16 amps single pole FLP switch for the point wiring, complete all as specified and directed.
53M & L for flameproof point wiring surface/concealed type with 4 Sqmm (nominal cross sectional area) with PVC insulated unsheathed single core stranded copper conductor (ZHFR/HFFR) cable of working voltage 1100 volts grade conforming to IS-694 drawn in and including steel surface conduit with all fittings & accessories such as FLP flexible conduit, FLP junction box, Brass glands/connector, bends etc. with 1.60 mm thick pressed steel or mild steel sheet sunk box, including 4 Sqmm (nominal cross sectional area) PVC insulated unsheathed single core stranded copper conductor (ZHFR/HFFR) cable as earth continuity conductor connected to main switch/ 'DB's or common earth dolly for one fan/light point controlled by one 16 amps single pole FLP switch for the point wiring, complete all as specified and directed.
54S&F FLP/WP rotary type switch with termination box in LM6, 16A, single pole 250V, direct entry, complete all as specified and directed.
55S&F in repair LED light fitting 2 x 16 Watt flame proof, CMRI certified recommended for gas/ vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, brass gland/connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable and flexible steel conduit of suitable size upto nearest ceiling rose, complete all as specified and directed.
56S&F LED flood light 120 watt, 230 V, AC, outdoor type, with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant made out of pressure dia cast aluminium housing with toughened glass and high power LED and secondary lenses, system efficiency > 110 LPM and 10 KV SPD included with driver and lamp complete with polycarbonate junction box and connecting wire copper 2.5 Sqmm, 3 core including taking down old unserviceable flood light, complete all as specified and directed.
57M & L flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2 Pin + earth (3 Pin) having full proof interlocking i.e plug cant be removed in ON condition, complete all as specified and directed.
58S&F flame proof sheet metal enclosure 4Way TPN double door IP 66 MCB DBs, phosphatised, powder coated, along with Triple Pole & Neutral (TPN) 80 Amp MCB-1 No. as incomer and 40 Amp SP MCB - 08 Nos & 06 Amp MCB-04 Nos as ougoing connection, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.Note : Rates of MCB TPN & SP shall be included in the quoted rates.
59Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core, complete all as specified and directed.
60Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia (outer) conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.
61M & L for flame proof junction box 4 way, 100mm dia with plain cover 3/4\\" ET, complete all as specified and directed.
62M & L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to earth lead lead wire 4 mm dia by means of nuts, bolts, check nuts & washers made of galvanised iron protection pipe light grade of 20mm dia and watering pipe medium grade of 15 mm dia and filled alternate layer of charcoal or coke and salt , watering funnel with wire mesh, earth pit chamber and cover CI frame PCC (1:3:6) type C-2 all as shown in electrical plate No 3 of SSR Part I of 2009 connected to earthing test point or as directed by Engr-in-charge all specified and indicated including necessary excavation and earth work in hard / dense soil, complete all as specified and directed.Note : Earth pit to pole/panel/DB shall be included in the unit quoted rates
63S & F flame proof exhaust fan 12\\" 1440 RPM, IP 66 (capacity 0.25 HP motor), made out of dynamically balanced hub of Aluminum alloy LM-6 having air discharge capacity of 1250 CFM coupled with flameproof motor of 0.25 HP single phase, including making hole in existing walls and making good the disturbed surface & match existing surface, complete all as specified and directed.
64M & L for heavy duty flame proof flexible metalic hose conduit of dia 20mm and 300mm long alongwith proper brass glands at both end, complete all as specified and directed.
65M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including concealed, rigid PVC conduit (ISI marked) not less than 20mm dia, medium grade, including all conduit accessories with and including concealed modular box of suitable size for mounting modular switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.
66S&F switch, modular type, single pole, one way, 5/6 Amp, one module, complete all as specified and directed.
67S&F decorative modular cover plate with frame, 1 module, white, completes all as specified and directed.
68S&F exhaust fan, steel body AC, single phase, 230V of size 450mm sweep with, blades, frame and louvers including cutting wall for fixing exhaust fan and making good the opening in CM (1:3) or PCC (1:2:4) type B1 as required at site, completes all as specified and directed.
69S&F exhaust fan, steel body AC, single phase, 230V of size 300mm sweep with, blades, frame and louvers including cutting wall for fixing exhaust fan and making good the opening in CM (1:3) or PCC (1:2:4) type B1 as required at site, completes all as specified and directed.
70S&F ceiling rose of size 65 x 50mm surface bakelite 240 Volts, three terminal, complete all as specified and directed.
71Note: An amount of Rs.1500.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58462932
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 25.10 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Addition/Alteration To Building No. P-909, Provn Pol Store And Provn Of Exhaust Fans In Otm At Afs Hasimara
Basic Detail
Tender No C/8131/2026-27/E8
Bidding Type Tender
Location
City Jalpaiguri
State West Bengal
Key Dates
Publish Date 10 Nov 2026
Submission Date 01 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 25.10 Lakhs
Tender Fee 500
EMD 50200
Exemption Available
Document List
86fff599-8ae1-4775-89e4-ec3ed4275dd1.html
BOQ_895363.xls
Tender8131.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
html

86fff599-8ae1-4775-89e4-ec3ed4275dd1.html

xls

BOQ_895363.xls

pdf

Tender8131.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender