Tender For Providing Of All Weather Shed At Various Location At Af Stn Borgad Under Ge (Af) Ojhar
Tender Value
28 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of All Weather Shed At Various Location At Af Stn Borgad Under Ge (Af) Ojhar
BOQ
| Sl. No. | Item Description |
| 1 | B&R Works : Surface excavation averaging 15cm deep and n.exc 30cm deep and getting out in soft/loose soil complete all as specified and directed |
| 2 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in hard/dense soil. |
| 3 | Removing excavated material to a distance exc.1.0 Km but not exc. 1.5Km and depositing where directed complete all as specified. |
| 4 | M & L for Hard core of broken hard stone or boulders of guage not exceeding 63 mm , deposited spread in layers n.exc 15cm thick , watered & well rammed to true surface complete all as specified and directed. |
| 5 | M & L for PCC 1:2:4, type B2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete for fixing of MS post complete all as specified and directed |
| 6 | Supply only liquid Water Proofing Compound (ISI Marked) of Make : CICO, Acco Proof, Impermo, Aqua flex, Choksey, STP Cipy as approved. |
| 7 | M&L for brick work with old size factory moulded Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, having compressive strength 7.5 N/mm² (Avg) & water absorption less than 20% built in cement mortar 1:4 complete all as specified. |
| 8 | S&F mild steel tubular work in tubular trusses, roof trusses (framed), trussed, purlins, crane gantries, rails and fastemings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 with one coat of zinc chromate primer paint. |
| 9 | S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and AZ value of 150 as in roof coverings/cladding to walls fixed with self tapping screws as specified. |
| 10 | M & L for 100 mm thick plain cement concrete 1:2:4 type B2 using 40 mm graded crushed stone aggregate as in sub base of floor and finished the surface complete all as directed. |
| 11 | M & L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in sub base of floor and finished the surface complete all as directed. |
| 12 | M & L for Rendering 15 mm thick in cement mortar 1:4 on internal concrete surface mixed with WPC @ the weight of minimum 2% by weight of cement mixed or as per manufacturer instruction , and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC measured and paid separately. |
| 13 | M&L preparing new plastered wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified. |
| 14 | M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed. |
| 15 | E&M Works : S & F and connecting up LED 22 watt inverter fitting 6500K 4 feet with 100 lumen/watt on AC & 450+-10% on DC,PC housing with off white end cap,ABS material off white with surge protection upto 4KV with inverter back up upto 3.5 Hrs & high voltage sustain capacity 440Vac@ 2Hrs ,internal wire PVC coated cable 0.75 sq mm RED/BLACK 12 CCA including all necessary fixing arrangements fastners ,holding brackets & screw etc complete. Crompton cat No LDINVGL22-CDL or equivalent in Philips/Havells ). |
| 16 | S&F flat three core 6 sqmm nominal cross sectional area multistand aluminium conductor cable over all PVC shathed 1100 volt grade Heavy duty cable complete all as specified |
| 17 | Supply & fix rigid non metelic PVC conduit/ PVC pipe not less then 20mm exclusive of boxes (junction/terminal) but inclusive of all tee,bends, elbow, reducer bell mount tube ends and fixing accessories such as coupler, lock nuts saddles, pipe hooks etc in surface in wall/celling/floor etc. complete all as specified & directed. |
| 18 | Supply and fix Sheet metal enclosure for DB’s SPN, with 100 amps rated bus bar , 2 way ,240 volts double door. Make : Standard/Havells/Legrand,Complete all as specified & as directed by Engineer-In-Charge. |
| 19 | Supply and fix MCB SPN 32 to 40 Amps 240 volts 10 KA. Cat Part No-408617 Make : Legrand /Standard/L & T,Complete all as specified & as directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender