Tender For Providing Of Miscellaneous Works At Atc At Af Stn Tambaram (8962/E8)
Tender Value
43.17 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
16 days left
EMD
86340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Miscellaneous Works At Atc At Af Stn Tambaram (8962/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L PCC type B-1, 1:2:4 using 20mm graded stone aggregates 25mm thick as sub base complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L for vitrified ceramic coloured tiles light shade 10 mm thick (square / rectengular) polished area of each tile n exceeding 0.36 sqm , in floors with tile spacers etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1 :6 in floors etc complete all as specified and directed by Engineer-in-Charge. |
| 4 | All as per item No 03 but in vertical surfaces set set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over and including 15 mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 7 | S & F in repairs, true or horizontal level 600mmx600mm panels, false ceiling, hot dipped galavnised steel sections exposed surface with precoated capping, main tee of size 24x32mm at every 1200mm c/c and cross tee of size 24x27mm (1200mm & 600mm long) at every 600mm c/c and wall angle of size 19x19mm fixed to perimetere wall, as per manufacturer's instructions, grid to be suspended at every 1200mm c/c in both directions by using 2mm dia pre-straightened GI wire at every 1200mm internal at the main tee, including 12mm thick gypsum board of size 600mm X 600mm with rear side aluminium foil and front side PVC lamination, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Providing and fixing factory made uPVC colourcasement window closed shuitters (composites of profiles of 60mm x 58mm x 2mm)for outer frames for two or more cloased shutters capable of mounting single glazing systemstructurally reinforced with hot dip galvanized upto 50 microns of min thickness1.2mm prefabricated welded through fusion weldingthe window sash shall be fitted with 5mm thick resistant accesories for casement window- friction stay hinges of stainless steel,per sash, handle with mazak alloy casting No.1 per sash, locking system suitably consealed 1 No., per sash with raiser wdges for smooth operation and system is to be installed at site using anchor fasteners, silicon rubber sealent, easy glazing, deglazing at site etc., with templates for casement sizing complete for finished item of work complete all as specified and directed by Engineer-in-Charge. |
| 9 | Providing and fixing factory made rigid uPVC approved coloures Door frame made of uPVC extruded sections having an overall dimensions as 110mm * 52mm with wall thickness 2mm, corners of door frame to be joined with galvanized brackets and stainless stell screws, joints mitred and Plastic welded. The hinge side vertical of frame reinf by galvanized MS tube of size 19 x 19mm and 1mm wall thickness and 3 Nos. of hinges fixed to frame completely as per direction of Engr in charge. Openable door made of multi chambered UPVC of approved coloured reniforced with Galvanized iron profile through the openable frame. Frame of 60mm x 38mm x 76mm with reinforcement of 1mm thickness and openable sash with overall size of 60mm x 76mm and reinforcement of 1.5mm thickness. Coextruded glazing bead for fixing of 6mm thick teflon clear float glass of desired make duly fixed with EPDM weathering seal resistant accessories including necessary etching of glass of approved logo and pattern all as directed. Wall thickness of frame and sash shall be 2mm complete all as specified and directed by Engineer-in-Charge. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge. |
| 11 | Dismantling AC corrugated or semicorrugated sheets in roof covering / wall cladding complete all as specified and directed by Engineer-in-Charge. |
| 12 | Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out, returining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50 mtr complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L Plain cement concrete, 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 14 | S & F steel work in tubular trusses, posts including special shaped washer ect. complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats/wind ties etc of confirming to Fe 410-W(Gde-E- 250) quality-A complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F for mild steel screw bolts (machine made), diameter of shank 11 to 15 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 15 mm long complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L Preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall bend to shape, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F 100mm dia, 1mm thick Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and directed by Engineer-in-Charge. |
| 22 | M & L for preparation of new surface of Eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc), with one coat of Red Oxide primer and two coat of synthetic enamal paint complete all as specified and directed by Engineer-in-Charge. |
| 23 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for PCC 1:4:8, Type D2 (using 40 mm graded stone aggregate), 75 mm thick, as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for Sand filling under paver blocks including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for rubber mould machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with grey cement and pigment complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F 10mm thick Toughened glass as in hinged doors, partitions automatic doors and similar works including cutting to shape, etching, drilling holes required complete all as specified and directed by Engineer-in-Charge. |
| 28 | S/F fixing aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for windows/ Doors/Ventilators/Partitions with one or more tracks including joining cleats/ channel for fixing glass/ mesh complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified as per manufacturers instruction and complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for pre laminated particle board 12 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with lipping as in doors of cupboards and cabinets complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n exc 0.50 sqm in each pne complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F Mild Steel 4 levers mortice lock vertical type size 100mm dia complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F door closer, aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80kg complete all as specified and directed by Engineer-in-Charge. |
| 34 | Taking down chowkats/Frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed by Engineer-in-Charge. |
| 35 | Taking down chowkats/Frames of area exc 1.5 Sqm and n.exc 4.0 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed by Engineer-in-Charge. |
| 36 | S F Aluminium powder coated (minimum thickness of powder coating 50 micron) side hung/sliding window/ ventilators shutters (I max) of aluminium section for frame work of shutters not less than 0.55 Kg/RM including necessary jointing cleats glazing clips, rubber packing anodised aluminium snap beads, screw, roller inter locking handles including 75 mm SS Hinges-02 Nos, 125 mm handles - 01 No, 125 mm long tower bolts - 02 Nos each shutter etc.complete all as specified: Note : Glass panes and wire mesh will be measured and paid separately complete all as specified and directed by Engineer-in-Charge. |
| 37 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 38 | M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 39 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed by Engineer-in-Charge. |
| 40 | M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 41 | Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed by Engineer-in-Charge. |
| 42 | M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (WPC measured and paid separately) complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 44 | M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 3mm thick wall care putty on wall and preperation of surface complete all as specified and directed by Engineer-in-Charge. |
| 45 | M&L preparation of new surfaces of external walls and applying one coat of primer and two coats of weather proof exterior emulsion paint (wheather coat Apex, 100% exterior grade) complete all as specified and directed by Engineer-in-Charge. |
| 46 | M&L Rendering 5mm thick in CM 1:3 on as in ceiling of fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 47 | Preparation of New plastered ceiling surfaces and applying three coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 48 | M&L for complete removal of existing treatment of wall, including Washing, rubbing down and stopping of distempered and painted surfaces of pilasters, including cornices and applying two coats of Oil Bound Distemper over a coat of alkali resistance primer including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material and labour for complete removal of existing treatment of walls/pillars /cornices, including Washing, rubbing down including applying white cement based putty where required for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, after preparing the surfaces applying two coats of weather proof exterior emulsion paint (wheather coat Apex, 100% exterior grade), as per existing or as approved tint/colour complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L for framed work such as grill, grating, guard bars etc. Grade confirming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L preparation of old decorated steel surfaces exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F Self Adhesive water proofing flash bond membrane 100mm wide of make:Bostiq India fixed to joints of AC/Ridge portion/over surfaces of galvalume roof sheets/concrete surfaces etc up to 30m height all as specified and as directed by Engineer-in-charge, incl necessary scaffolding and removal of the same after completion of the job complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in repair viterous china WHB flat back of size 550x400mm incl GI Brackets, CP brass waste coupling with check nut and washers of suitable and waste pipe to be complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Parryware/ CERA/ Hindware |
| 54 | S&F in repair 15 mm bore brass Chromium plated Fancy type Pillar taps with capstan heads, screwed down high pressure ,with or without lettered 'Hot or Cold ' with long screwed shanks and fly nuts , screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/SOMA/Leader/ Zoloto Parryware/Prayag |
| 55 | S&F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed. Bore of Trap 32mm complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ SOMA/ Leader/ Zoloto/ Parryware/ Prayag |
| 56 | S&F Pvc downtake pipe,32 mm for WHB / urinals complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge. |
| 61 | S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F in reairs PVC (SWR) bends with access door any radius 110mm bore complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F in reairs PVC (SWR) bends with access door any radius 75mm bore complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F in repairs PVC (SWR) branch piece,110mm bore single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F in repairs PVC (SWR) branch piece,75mm bore single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge. |
| 67 | S& F in repairs PVC (SWR) junction single,(Single T) 110mm bore with access door equal or unequal complete all as specified and directed by Engineer-in-Charge. |
| 68 | S& F in repairs PVC (SWR) junction single,(Single T) 75mm bore with access door equal or unequal complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repairs rotational moulded polyethylene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repairs 25mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repairs 25mm bore Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 74 | S & F 15mm long body Bib taps cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule for fancy type Chromimum plated fixed in repair complete all as specified and directed by Engineer-in-Charge. |
| 75 | Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 76 | All as per item No. 75 above but bore of pipe in 20mm dia complete all as specified and directed by Engineer-in-Charge. |
| 77 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed by Engineer-in-Charge. |
| 78 | S&F 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls including ceiling including complete all as specified and directed by Engineer-in-Charge. |
| 79 | --- Ditto ---- but outer diameter of the pipe is 20 mm |
| 80 | S&F in repairs Vitreous China urinals, half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engineer-in-Charge. |
| 81 | S&F Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F in repairs 15mm dia chromium plated fancy type angle/stop cock cast copper alloy screwed down high pressure fancy screwed both ends for pipe or for union complete all as specified and directed by Engineer-in-Charge. |
| 84 | M&L for Precast cement concrete as in cover slab 1:2:4, type B1 (using 20mm graded aggregate) in landings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, for manholes complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L Plain cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in coping, benching and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed by Engineer-in-Charge. |
| 86 | S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F In repair viterous china water closet pedestal pattern with P or S trap incl connection to flush and water pipe etc complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Parryware/ CERA/ Hindware |
| 88 | Supply only Seat Cover for EWC White flat bottom solid with CP hinging device, nuts & bolts etc complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Parryware/ CERA/ Hindware |
| 89 | Supply and fixing only in repair PVC valveless, syphonic action type, flushing cistern of 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Parryware/ CERA/ Hindware |
| 90 | S&F 600x450 bevelled edged looking mirror 6mm thick with Design wooden frame work fitted with 6mm thick commerical ply or AC sheet backing to mirror fixed as in repair complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply and Fix in repairs Health faucet ABS body 15mm dia pipe with 1.25metre long PVC tube with wall hook, Chromium Plated complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F for angular two way stop cock 15 mm bore chromium plated with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union fixed as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 93 | M&L for PolyUrethane waterproofing membrane treatment comprising the followings :-(i) Removal of all loose gravel, dirt, oil, grease and foreign matter or existing membrane by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application. All Substrates should be clean, sound and free of laitance. (ii) Crack repair by cutting “V” groove and fill with PMC mortar prepared in the ratio of ShaliCrete: Cement : Sand (1 : 2 : 5).(iii) Bonding Agent coat with Mix 2-parts cement to 1-part ShaliSBR Latex by weight of cement and apply a bonding coat with consumption of mixture 0.3 - 0.5 kg / m2 and allow to cure the bonding agent minimum 3 to 5 hrs.(iv) Priming the surface with ShaliUrethane® BTD dilute with water @ 1:1 ratio and use as primer @ 400 gm /m² and allow the primer coat to touch dry condition.(v) Appllying 1st coat of ShaliUrethane® BTD @ 1.0 kg / m² by brush / roller while the primed surface is tacky and allow 1st coat to dry for 4-8 hrs.(vi) Spreading of non-woven geo-textile or Fiber Glass Tissue / scrimp of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky.(vii) Appllying 2nd coat of ShaliUrethane® BTD @ 1.0 kg / m² by brush / roller for final DFT of 1000 micron in two coats. Ensure final curing time of 36 hours before allowing / carrying out any further work. Conduct ponding test after 14 days of curing at ambient temperature. |
| 94 | Demolition of plain cement concrete in floors (other than ground floors) and similar suspended works including disposal of demolished materials exc 500m but n.exc 1000m complete all as specified and directed by Engineer-in-Charge. |
| 95 | M&L PCC as in roof padding type B0 (1:2:4) using 12.5 mm graded aggregate complete all as specified and directed by Engineer-in-Charge. |
| 96 | M&L Rendering 10mm thick in CM 1:4 with water proofing compound @ 3% by weight of cement over RCC slab, parapet and the like etc. finishing fair and even complete all as specified and directed by Engineer-in-Charge.(Note: WPC will be measured and paid separately) |
| 97 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 98 | Removal of debris obtained from demolition/dismantling upto 5Km distance to outside MD land complete all as specified and directed by Engineer-in-Charge. |
| 99 | M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 25 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 16 Sq mm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in ccocealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge. |
| 100 | M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 16 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 16 Sq mm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in ccocealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge. |
| 101 | M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 10 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 10 Sq mm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in ccocealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge. |
| 102 | M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 6 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 6 Sq mm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 103 | M & L for sub main wiring with two single core FRLS, PVC insulated, stranded, unsheathed cable copper conductor with size 6 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including earth continuity conductor of size 6 Sq mm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender