Tender For Special Repair To Bldg No P-75 & P-77 At 4/1 Gr Under Ge (West) Delhi Cantt-10
Tender Value
40.96 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
19 days left
EMD
81920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-75 & P-77 At 4/1 Gr Under Ge (West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, incl wooden / metal fillets & grid, complete all as spd & directed. |
| 2 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd & directed. |
| 3 | Demolition of cement concrete (unreinforced) n. exc. 15cm thickness (below or above ground level) all as spd & directed. |
| 4 | Dismantling floor tiles, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 5 | Taking down cement or cement lime plaster, any description, on brick or stone walls incl racking out joints, hacking for key, scrubbing down with water, etc. complete all as spd & directed. |
| 6 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd & directed. |
| 7 | All as per item No. 6 above but n. exc 1.5 sq. m each. |
| 8 | S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed |
| 9 | M&L for brick work with fly ash sub class 'B' old size bricks in CM 1:6, straight or curved on plan exc 6 m mean radius complete all as spd & directed. |
| 10 | M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) for plinth protection over hardcore finished even & fair complete all as spd and directed. |
| 11 | M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in levelling couse of sub base all as specified and directed. |
| 12 | M&L for coloured Glazed vitrified tiles in floor 600x600x8mm to 10mm thick set and jointed in neat cement slurry incl 15 mm thick screed bed in cm 1:6 and pointed in white or coloured cement to match complete all as spd & Directed. |
| 13 | M&L for Non - skid Ceramic coloured tiles 400x400x7 to 8 mm thick, in floors etc. set and jointed in neat cement slurry incl 15 mm thick screed bed in cm 1:4 and pointed in white or coloured cement to match complete all as spd and directed. |
| 14 | M&L for Glazed ceramic coloured tiles in vertical surface 300x450x7mm to 8mm thick set and jointed in neat cement slurry incl 10 mm thick screed bed in cm 1:4 and pointed in white or colour cement to match complete all as specified and as directed. |
| 15 | M&L for rendering 10mm thick ready mix plaster on fair faces of brick work or concrete surfaces of walls finished fair and even without using extra cemet complete all as directed |
| 16 | M&L for rendering 15mm thick ready mix plaster on fair faces of brick work or concrete surfaces of walls finished fair and smooth without using extra cement all as specified and directed |
| 17 | M&L for providing 1mm thick wall care putty on wall surface complete all as specified and directed. |
| 18 | M&L for preparing surface of wall and applying two coat of oil bound distemper on old/new surface all as specified and directed. |
| 19 | M&L for preparation of new plastered surfaces on walls and applying two coats of cement base paint including one coat of alkali resistant primer complete all as specified. |
| 20 | M&L for applying two coats of cement base paint in camouflage patttern over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed. |
| 21 | M&L for applying three coats of white wash on old surfaces of wall after preparation of surfaces complete all all specified and directed. |
| 22 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/window ot other frames/chowkats of size 50 x 75mm comprising of vergin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood poder/rice husk/wheet husk) and non toxic additive etc all as per SSR park 2 ser No 08110A complete all as specified and as directed. |
| 23 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges shall be paid separately) complete all as specified and as directed. |
| 24 | S&F Factory made 35mm thick second class hard wood plain framed panelled door shutters (Minimum two panels) with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The sizes of rail and stiles as per IS:1003 ( Part I), kiln seasoned and chemically pressure treated and fixed in position complete all as spd & directed . |
| 25 | S&F factory made 35mm thick 2nd class hard wood glazed / gauged shutters (minimum two panels), open, rebated prepared to receive glass , guage etc W/O sash bars for doors edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed |
| 26 | S&F in repair stainless steel butt hinges 100mm size complete all as spd & directed. |
| 27 | S&F in repair aluminum anodized barrel tower bolts of extruded section of size 150 mm complete all as spd & directed. |
| 28 | S&F in repair aluminum handles cast type anodised of size 150 mm complete all as spd & directed. |
| 29 | S&F in repair aluminium alloy, anodised, sliding door bolt (length of bolt 300 mm) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as spd & directed. |
| 30 | M&L for preparting new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as spd & directed . |
| 31 | M&L for powder coated (50 micron) Anodised aluminium frame for doors, windows, ventilators,aluminium grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing, silicon packing etc complete all as specified and directed. (Note : measured only aluminium part as per SSR part-1, Glass and Wiremesh shall be measured and paid separately under respective item) |
| 32 | S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, aluminium handles 2 Nos 150mm long in each shutter, hinges 03 Nos 100mm long in each shutter, Tower bolt 02 Nos 150mm long in each shutter, anodised aluminum snap beading screws etc. complete all as specified. Note:-(Glass for doors and windows under this item shall be measured and paid seperately under respective item). |
| 33 | S&F powder coated (50micron) aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed. |
| 34 | S&F 5.5 mm thick Sheet glass, selected quality and fixed to aluminium joinery in each pane complete all as spd & directed. |
| 35 | S&F 4.0 mm thick Sheet glass, selected quality and fixed to aluminium joinery in each pane complete all as spd & directed. |
| 36 | M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed. |
| 37 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/door frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as spd and directed. |
| 38 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide Zink chrome complete all as spd & directed. |
| 39 | Dismantling Water tanks exc 500 but not exceeding 1000 Ltr capacity and removing to store complete all as specified and directed. |
| 40 | M&L for 1000Ltr capacity Rotational moulded polyethylene water storage tanks tripple layers white colour (cylindrical vertical with closed top) hoisted and fixed in position in repair all as specified including all necessary tank connection and cover,reducer, 25mm bore ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed. |
| 41 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified & directed. |
| 42 | S&F 100mm bore sand cast iron soil waste and vent pipe (Cast type) in any length with or without ears with cement joints fixed to walls or laid in floor etc complete all as specified and directed. |
| 43 | M&L cast iron floor trap 75mm outlet diameter with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as spd & directed. |
| 44 | M&L PVC gully traps 150x150mm , square mouth \\"P\\" type complete all as specified and directed. |
| 45 | S&F 100 mm bore dia Cast iron cowls complete all as specified and directed. |
| 46 | S&F 100mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 47 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, uinal Partition , single piece in steps and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed in CM 1:4 including dismantling/roughning of old existing flooring complete all as specified and as directed. |
| 48 | M&L for machine cut kota stone slab flooring 18-20mm thick over 15mm thick cement mortar screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing after dismantling/roughning of old existing flooring complete as specified and directed |
| 49 | M&L for rubbing & mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.. |
| 50 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron, white and connection with cistern complete all as specified and directed. |
| 51 | S&F in repairs vitreous china squatting pan 'Orissa' pattern,size 580X440mm, white, with intergral foot rests (excluding flushing cistern and flush pipe) including connection to trap & to flushing pipe,anti syphonage pipe etc incl making good to floor to match with adjoining area complete all as spd & directed by Engr-in-Charge. |
| 52 | S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed. |
| 53 | S&F in repair 15mm dia cast copper alloy, chromium plated Health faucet body with 1.25mtr ABS body pipe complete all as specified and directed. |
| 54 | S&F in repair Grating doom 100/125mm dia of SS (Minimum weight 25gms) complete all as specified and directed. |
| 55 | S&F in repair PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and directed. |
| 56 | S&F in repair flexible PVC waste pipe with coupler complete 900mm length complete all as specified and directed. |
| 57 | Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil and removing debrish beyond MOD land complete all as specified and directed. |
| 58 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 59 | M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed. |
| 60 | M&L for Pre polished machine pressed Chequred cement concrete tiles glossy finish 30cmx30cmx25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm screed bed in cm 1:6 complete all as specified and directed. |
| 61 | S&F in repair PVC low level white flushing cistern, valveless syphonic action type 10 ltr capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia bend and a pair of mild steel iron brackets of suitable size incl making necessary connection to water supply pipeline, including PVC connection pipe 15mm size 600mm long with PTMT nuts complete all as spd & directed. |
| 62 | S&F in repair vitreous chinaware wash hand basin (WHB), white, size 550x400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc including PVC connection pipe 15mm size 600mm long with PTMT nuts complete all as spd & directed. |
| 63 | S & F in repair 15mm bore brass chromium plated wall mixer with connection to the over head shower arrangement complete all as specified and directed. |
| 64 | S & F in repair 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 65 | S&F in repair for Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified. |
| 66 | S&F in repair 15mm dia chromium plated fancy type long body Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 67 | S&F in repair 15mm bore dia pipe angle/stop valve chromium plated fancy type,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with long shank and cup (concealed type) complete all as specified and directed. |
| 68 | Taking up or down 15mm dia steel tubing and connection incl cleaning or removal from the site of work complete all as specified and directed |
| 69 | All as per item no. 68 above but 20mm dia |
| 70 | M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed. |
| 71 | M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed. |
| 72 | S&F in repair chromium plated stanless steel curtain rod 25mm bore fixed with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 73 | S&F for curtain rod's side bulb/knob stainless steel chromium plated suitable for 25mm bore curtain rod complete all as specified and directed. |
| 74 | S&F in repair coated MS curtain rod's brackets as required complete all as specified and directed complete all as specified and directed. |
| 75 | S&F in repair Stop Valve /gate valve 20 mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified. |
| 76 | S&F in repair 450mm Glass Shelf 8mm thick including CP complete all as specified and directed/approved by the Engineer-in-Charge |
| 77 | S&F in repair brass chromium plated soap dish, complete all as specified. |
| 78 | S&F in repair brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified) |
| 79 | S&F in repairs for 600x450mm beveled edge mirror of selected quality glass 5.5 mm thick mounted on and including four Nos. hanging stainless steel clips, Complete all as specified and as directed by Engr in Charge. |
| 80 | S&F in repairs stainless steel toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed |
| 81 | S&F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm complete all as specified and directed /approved by the Engineer-in-Charge. |
| 82 | Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed (Note : Height of bldg upto 4th story). |
| 83 | M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed |
| 84 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed Please Enable Macros to View BoQ information |
| 85 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender