Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58462680

Tender For Special Repair Of Bldg No Ta-7 At Fire & Fury Offrs Mess (14 Cesr) Under Age B/R-Ii Of Ge 865 Ews.

Issued by Statutory Bodies & Commissions/Committees · leh, Ladakh
Tender Value
10.59 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
21200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair Of Bldg No Ta-7 At Fire & Fury Offrs Mess (14 Cesr) Under Age B/R-Ii Of Ge 865 Ews.

BOQ

Name of Work:- SPL REPAIR OF BLDG NO TA-7 AT FIRE & FURY OFFRS MESS (14 CESR) UNDER AGE B/R-II OF GE 865 EWS.
Sl. No. Item Description
1Dismantling floor, hearth or wall tiling including cement mortar bedding (but including backing), rubbish off the premises, complete all as specified and/or as directed.
2Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thick (below or above ground level) and removing debris ouside MD land, complete all as specified and/or as directed.
3Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed.
4M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in alternate bay as in plinth protection 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume) incl dismantling, complete all as specified and/or as directed. Note:- The unit rate include for use of form work (straight or curved).
5M&L for Vitrified tiles (light shade) 8 mm thick in size of 600mmx600mm as in floors/skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15mm thick cement slurry in CM 1:4, complete all as specified and/or as directed.
6M&L for Glazed ceramic coloured tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4, complete all as specified and/or as directed.
7M & L for Non-Skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exc 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in 15mm thk neat cement slury and pointed in white or coloured cement to match, complete all as specified and/or as directed.
8M&L for plain sheet glass 4.00mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane including hacking out, complete all as specified and/or as directed.
9S&F in repairs Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and fixed, complete all as specified and/or as directed.
10Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc), complete all as specified and/or as directed.
11S&F 2nd hard wood as in plain solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints, complete all as specified and/or as directed.
12S & F 35mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats, complete all as specified and/or as directed.
13M&L for two coats of synthetic enamel paint over one coat of pink primer on new decorated wooden surfaces including preperation, complete all as specified and/or as directed.
14S&F 200 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and/or as directed.
15S&F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and/or as directed.
16S&F in 150mm long anodized aluminum door handle cast type, complete all as specified and/or as directed.
17S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling, complete all as specified and/or as directed.
18S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling, complete all as specified and/or as directed.
19S & F, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and conforming to Fe 410-W Gde E-250 quality 'A',complete all as specified and as directed.
20Dismantling structural steel work including doors and gates of any description, complete all as specified and/or as directed.
21Demolition brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and/or as directed.
22Material and Labour precast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonry with solid blocks,exc.10cm in width and setting in cement mortar 1:6, complete all as specified and/or directed.
23M&L rendering 15mm thick in CM 1:4 on fair faces of concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement, complete all as specified and/or as directed.
24M&L rendering 15mm thick in CM 1:6 on other than fair faces of concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement complete all as specified and/or as directed.
25M&L for Preparing newly plastered surfaces of walls and applying two coats of acrylic emulsion paint over a coat of primer over a coat of wall care putty applied till the surface is smooth etc. complete all as specified and/or as directed.
26M & L for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer including 1mm thick birla wall care putty complete all as specified and directed.
27Taking down cement plaster on brick/pcc block or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and/or as directed.
28Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specified and/or as directed.
29Prelaminated particle board 9mm thk fix in walls interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and/or as directed.
30M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium powder coated snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design, complete all as specified and/or as directed.
31S&F in repairs for 2nd class soft wood clean sawn as in scantling fixed with nails including dismantling, complete all as specified and/or as directed.
32S&F in repairs 2nd class softwood clean sawn as in scantling fixed with nails exceeding 06 Sqcm and n.exc 13 Sqcm in section including dismantling, complete all as specified and/or as directed.
33Dismantling boarding, any description, fixed in any position with nails, complete all as specified and/or as directed.
34M&L for 7-8mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed,over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete, complete all as specified and/or as directed.
35Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 500 ltrs but not exc 1000 ltrs and removing to store, complete all as specified and directed.
36S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene incl all random fittings fixed complete to walls, ceilings or in floors etc. including taking down old tubing, complete all as specified and/or as directed.
37Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia, complete all as specified and/or as directed.
38S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors, complete all as specified and/or as directed.
39S&f 110 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors, complete all as specified and/or as directed.
40S&f 75mm bore PVC (SWR) pipe bends any radius, complete all as specified and/or as directed.
41S&F PVC (SWR) 110mm bore bends any radius, complete all as specified and/or as directed.
42S&F PVC (SWR) 110mm bore junction single (single T), complete all as specified and/or as directed.
43S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and/or as directed.
44M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement, complete all as specified and/or as directed.
45S&F PVC (SWR) 75mm bore vent cowl, complete all as specified and/or as directed.
46S&F PVC (SWR) 'S' trap 110mm bore for EWC/IWC, complete all as specified and/or as directed.
47S & F single piece wall hung EWC (fixed in repair) with fixing accessories of size 610x480x195mm, with full pedestal & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregates), complete all as specified and directed.
48S&F in repairs for viterous china wash hand basin flat back size 600x480 mm excluding taps, waste , chain , plug and porcelain stopper incl brackets, complete all as specified and/or as directed.
49S&F in repairs 20mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure with handle screwed both ends for iron pipe or brass ferrule, complete all as specified and/or as directed.
50S&F in repair pillar tap fancy type double lever tall body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers, complete all as specified and/or as directed.
51S&F in repair hand shower ( health faucet ) CP with 6-8 mm dia. and 1-1.5 metre long flexible tube and wall hook including making connections and fixed in position, complete in all respect as specified and directed.
52S&F in repair chromium plated coloured/stainless steel paper holder fixed on walls, complete all as specified and/or as directed.
53S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup, complete all as specified and/or as directed.
54S&F in repair chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore, complete all as specified and/or as directed.
55S&F in repair glass shelf corner in shape of arc/semicircle/triangular fixed on walls with screws, complete all as specified and/or as directed.
56S&F in repair chromium plated/ powder coated towel rack( 1-3 horizontal runners and 1 runner at bottom and min 2 hangers) fixed to walls with screws, complete all as specified and/or as directed.
57S&F in repair CP brass towel ring(triangular/rectangular/circular) fixed and incl CP brass screws and complete all as specified and/or as directed.
58S&F in repair PVC connections 15mm size with CP nuts of length 450-600mm and 3 layer protection of pipe with stainless steel wire mesh and double coated pvc pipe for hot and cold, complete all as specified and/or as directed.
59S & F in repair bevelled edge mirror of selected quality glass, fixed to wall with chromium plated brass spacer screws and cup washers, complete all as specified and/or as directed.
60S&F PVC coated mild steel conduit pipe 25 mm bore (Drapper rod) with a pair of PVC coated MS clamps to hold drapers rod and decoractive attachment at one or both ends of drapers rod, fixed to opening of door/windows (each opening n.exc 1.50m, contained with a pair of clamps and pair of side ornamented attachments), complete all as specified and/or as directed.
61S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), complete all as specified and/or as directed.
62S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations, complete all as specified and/or as directed.
63S&F in repairs 25mm PP-R Ball valves (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 20mm bore, complete all as specified and/or as directed.
64Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc, complete all as specified and/or as directed.
65M&L for point wiring with copper conductor FRLS cable Multistrand, single core 1.5 Sqmm size for one light point or bell point /Ex: fan Point controlled by one switch including one run of 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including metal / PVC flush box suitable for modular fitting as per site requirement duty type for mounting switches /sockets etc, complete all as specified and/or as directed.
66All as per item No 65 here-in-before but for 5 Amps Socket outlet in same Board with 1.5 sq mm cable, complete all as specified and/or as directed.
67All as per Item No 65 here-in-before but for 5 Amps Switch Socket Combination in independent board with 1.5 Sqmm Cable, complete all as specified and/or as directed.
68All as per item No 65 here-in-before but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2mm, complete all as specified and/or as directed.
69Modular switch 1 way 6A, 1 module complete all as specified and directed.
70Modular switch 1 way 16A, 1 module, complete all as specified and/or as directed.
71Socket, 6A - 2/3 pin combined 2 module, complete all as specified and/or as directed.
72Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and/or as directed.
73Modular white colour cover plate 3 module , complete all as specified and directed.
74Modular white colour cover plate 6 module, complete all as specified and directed.
75Supply and fix as in repair decorative durable LED batten fitting 18 Watt , 4 feet long with decorative and caps, powder coated CRCA decorative for LED tube 1x18/20 W LED including LED retrofit , 4 feet long (white colour) tube of 18 watt having driver ,connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site, complete all as specified and/or as directed.
76S&F in replacement of old U/S LED Mirror light fitting 9/10 watt 230 volts box type , with standard specification etc warm white colour connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
77S&F in replacement of LED Bulk head luminaire 10/11 Watts with all accessories pre wired twin core twisted flexible copper conductor cable with suitable size and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
78S&F in replacement of old U/S 2'x2' Recess mounting slimness (9 mm thin) in class LED Ceiling Panels white LED Luminaries white powder coated sheet housing LED front frame blends seamlessly with Ceiling layout of capacity 36 watt (2x2) LED extruded alluminium heat sink projected in false celing and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
79Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
80Ceiling rose surface bakelite 65x50 mm two to three terminals, complete all as specified and/or as directed.
81M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping, complete all as specified and/or as directed.
82Replacement of MCB DB, SPN, 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
83MCB, SP, AC, 240 volts \\"C\\" series capacity of 6-32 Amps, 10kA and making connections, complete all as specified & directed.
84MCB, SPN, AC, 240 volts \\"C\\" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed.
85Earthing complete in repair with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to 4mm dia galvanised earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009.Note : 1. RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover. 2. On testing after completion if the desired earth resistance is not obtained the earthing will be re-done at no extra cost.
86Deduct Schedule of Credit of Rs (-) 41021.21 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58462680
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 10.59 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair Of Bldg No Ta-7 At Fire & Fury Offrs Mess (14 Cesr) Under Age B/R-Ii Of Ge 865 Ews.
Basic Detail
Tender No 865/EWS(NIT-134/2026-27
Bidding Type Tender
Location
City leh
State Ladakh
Key Dates
Publish Date 10 Nov 2026
Submission Date 02 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 10.59 Lakhs
Tender Fee 500
EMD 21200
Exemption Available
Document List
5a07b2b2-b07d-46da-8013-a7070c79f76b.html
BOQ_895140.xls
TENDERNIT_134.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 18 days

Tender Documents

Download All (ZIP) ↓
html

5a07b2b2-b07d-46da-8013-a7070c79f76b.html

xls

BOQ_895140.xls

pdf

TENDERNIT_134.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender