Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #58462668

Tender For Addition/ Alteration To Building T-81 (Sarv Dharam Sthal) Of 22 Weu Under Ge 865 Ews, Leh

Issued by Statutory Bodies & Commissions/Committees · leh, Ladakh
Tender Value
21.91 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
15 days left
EMD
43900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Addition/ Alteration To Building T-81 (Sarv Dharam Sthal) Of 22 Weu Under Ge 865 Ews, Leh

BOQ

Name of Work:- ADDITION/ ALTERATION TO BUILDING T-81 (SARV DHARAM STHAL) OF 22 WEU UNDER GE 865 EWS, LEH
Sl. No. Item Description
1Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed.
2M&L for 10mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed
3M&L for 10mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and as directed
4Supply only integral liquid water proofing compound complete all as specified and directed.
5M&L for 1mm thick wall care putty complete all as specified and directed.
6Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting complete all as specified and directed .
7M&L for preparation of newly plastered surfaces of wall by applying wall care putty averaging thickness 1mm and rubbing with sand paper for making smooth surface and applying two coat of oil emulsion distemper over one coat of primer through roller, complete all as specified and directed .
8M&L For preparation of old surface after complete removal of existing treatment by mechanical complete all as specified and directed
9M&L for 1 coat of prime using roller complete all as specified and directed.
10M&L for Two coat of OBD using roller for painting complete all as specified and directed
11M&L preparation of Complete removal of existing treatment plastered old surface of of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed.
12Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specified and as directed.
13M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.
14M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed.
15Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton unframed work, complete all as specified and as directed.
16M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section, complete all as specified and as directed.
17M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section, complete all as specified and as directed.
18M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed.
19Dismantling boarding / wooden flooring of any description ,fixed in any positon, complete all as specified and as directed.
20M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets ,over 6 micron polythylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified by manufacture, complete all as specified and as directed.
21Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises, complete all as specified and as directed.
22M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor , complete all as specified and as directed.
23M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete all as specified and as directed.
24M&L Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles including 15 mm thick screed in cement mortar (1:4) as in floors etc, complete all as specified and as directed.
25S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade, complete all as specified and as directed.
26Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar, complete all as specified and as directed.
27M&L for 20 mm thick granite stone (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting, etc and screed bed with CM (1:4) 20mm thick laying floor tiles complete all as specified and as directed.
28Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc, complete all as specified and as directed.
29M&L for pre cast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded curshed stone aggregate complete all as specified and directed.
30Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed.
31M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc., complete all as specified and as directed.
32M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6), complete all as specified and as directed.
33M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade, complete all as specified and as directed.
34M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidatio, complete all as specified and as directed.
35M & L for 75 mm PCC 1:2:4 type B-1 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and as directed.
36M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and as directed.
37Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each, complete all as specified and as directed.
38Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed.
39S&F Powder coated anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed.
40S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed.
41S&F Powder coated Anodised aluminium window and ventilator shutters,including aluminium jali fixed in one side, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc including powder coated anodised aluminium frame, grill with one or more rebates, complete all as specified and as directed.
42M&L sheet glass 4.8mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane, complete all as specified and as directed.
43S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prepared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately), complete all as specified and as directed.
44S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats, complete all as specified and as directed.
45S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification, complete all as specified and as directed.
46S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification, complete all as specified and as directed.
47M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
48S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples.
49S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and as directed.
50S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete.
51S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and as directed.
52S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and as directed.
53S&F in repair aluminium (Die cast) body door closer hydraulically dessignation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg, complete all as specified and as directed.
54S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed.
55S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.
56S&F 100mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.
57S&F, Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.
58Dismantling water tank exc 500 & n exc 1000 litre and removing to store, complete all as specified and as directed.
59S & F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store of 1000 ltrs capacity, complete all as specified and as directed.
60S&F 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specified and as directed.
61S&F 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe and fixed in repair, complete all as specified and as directed.
62S & F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfy handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.
63Taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and as directed.
64Taking up or down 25/32 mm bore steel tubing and connections and set aside for re-use or removal to store, complete all as specified and as directed.
65S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions, complete all as specified and as directed.
66S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions, complete all as specified and as directed.
67Providing 50mm thick insulation of water pipe line 20/25/32 mm dia pipe complete all as specified and directed by Engr in Charge. which includes of the following:- Export quality heat traceable (heat tape) , self regulating and auto cut with thermostate systemAluminum tapeK. Flex 19mmRock woolWire MashPolytheneCello tapeAluminum sheet 28 gauge
68S & F in repair Vitreous China wash basin Fency type pedestal pattern , white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and as directed.
69Supply & Fixing sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.
70S&F in repair chromium plated fancy pillar tap 15 mm dia, complete all as specified and as directed.
71S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins, complete all as specified and as directed.
72Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed.
73S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
74S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and as directed.
75M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
76Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and rubbish off the premises, complete all as specified and directed.
77M&L for Reinforcement cement concrete (Nominal Mix) in type B1 1:2;4 ( 20mm graded aggregate) as in slabs supported of walls , beams and columns in floors, roofs, landings, balconices , canopies , deck slabs and in shelves etc complete all as specified and as directed
78M &L for form work to soffits of suspended slabs flat type such as roof slabs , floor slabs , landings and similar work nto exceeding 200mm thick (Horizontal or slopping etc, complete all as specified and as directed.
79M&L mild steel TMT bars 10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar, complete all as specified and as directed.
80S&F in repair 19mm dia mild steel, chromium plated curtain rods fancy type , with brackets, end bulbs, complete all as specified and as directed.
81S&F in repairsTowel rail 600mm long Cromum plated (Minimum weight 190 gms), complete all as specified and as directed.
82S&F in repairs Towel Hanger with 6 Nos of pin and 600mm long Chromium plated etc, complete all as specified and as directed.
83Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern, complete all as specified and as directed.
84S &F Pre-painted galvanum aluminum zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering /clading to walls fixed with self tapping screws complete all as specified and directed.
85S &F Pre-painted galvanum aluminum zink coating GI based corrugated plain sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering /clading to walls fixed with self tapping screws complete all as specified and directed.
86Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed.
87M&L for Point wiring for one light point or fan point or bell point controlled by one switch with PVC insulated FRLS copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/ pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.00mm thick plastic lamiated sheet cover, complete all as specified and as directed.
88All as per item No. 87 here -in-before but 1.5 sqmm for one 3 pin 5 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on same board.
89All as per item No. 87 here -in-before but 1.5 sqmm for one 3 pin 5 Amps socket outlet independent including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly.
90M&L for point wiring for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 1 .5 sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing/caping with sunk cast iron, complete all as specified and as directed.
91Modular Switch one way single pole 6 Amp 1 Module 240 Volts, complete all as specified and as directed.
92Modular Switch one way single pole 16 Amp 1 Module 240 Volts, complete all as specified and as directed.
93Modular Sockets 6 A 2/3 Pin combined 2 module 240 Volts, complete all as specified and as directed.
94Modular Sockets 6/16 Amp 2/3 Pin combined 2 module 240 Volts, complete all as specified and as directed.
95Modular white cover plate with frame 3 module, complete all as specified and as directed.
96Modular white cover plate with frame 6 module, complete all as specified and as directed.
97Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed.
98Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB, complete all as specified and as directed.
99Supply and fixing surface/wall mounted LED fittings with LED tube 20 watts, 6000Kcapacity decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 4 feet long type bracket including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
100S&F in replacement of LED 36 watts recessed 2x2 luminaire WARM white to enhance the delight of occupants with comfortable experence through its design & glare free soft illumination and connection of 3 core copper wire with all accessories, complete all as specified and as directed.
101Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes for hot and cold water etc and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
102Supply and fix in replacement of air circulating fan with Plastic body 300 mm sweep and making necessary arrangements for fixing and connectioning with flexible three core cable from the ceiling rosec and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
103Replacement of MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.
104MCB, SPN, AC, 240 volts \\"C\\" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed.
105MCB, SP, AC, 240 volts \\"C\\" series capacity of 6-32 Amps, 10kA and making connections, complete all as specified & directed.
106Excavation over areas not exc 1.5 m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc plan area exc 10 sqm hard/dense soil and getting out soil, complete all as specified and as directed.
107Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specified and directed.
108Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed.
109Material and labour for sand in trenches as in cushioning to under ground cable spreading, levelling hand punning complete all as specified and directed.Note- Punned down thickness will be measured for payment purpose complete all as specified and directed.
110Supply and laying unreinforced pre cast concrete cable cover class LV type I flat size 250x150x40mm, complete all as specified and directed.
111Supply and lay PVC insulated, heavy duty, LT XLPE galvanised steel strip armoured electric power cable of size 35 sqmm 3.5 core with stranded aluminium conductor 1100 Volts grade, jointed with cable glands, lugs etc., laid in trenches/drawn through pipe, with and including taking down old unserviceable cable, complete all as specified and directed.
112Supply and lay PVC insulated, heavy duty, LT XLPE galvanised steel strip armoured electric power cable of size 10 sqmm 2 core with stranded aluminium conductor 1100 Volts grade, jointed with cable glands, lugs etc., laid in trenches/drawn through pipe, with and including taking down old unserviceable cable, complete all as specified and directed.
113S&F GI tubing 40mm dia \\"light grade\\" with all fittings, laid in trenches, fixed on pole/under road crossing or passing through gutters etc, complete all as specified and directed.
114M&L in replacement for Earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and inclduing GI Strip 32X6 mm as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS frame and cover 6 mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed Note- (i) earth resistance not more than 1.0 OHMS.Writing of details on the surface of the pit with paint. (ii) In case earth resistance more than 1.0 ohms, the contractor wiil re earthing at no extra cost. (iii) On testing, if the earth resistance less than specified is not obtained, earthing will be regenerated at NO EXTRA COST till the desired earth resistance is obtained.
115All as per itme No. 114 here-in-before but 4 mm GI wire complete all as specified & as directed.
116Cutting the existing bituminuos road for passing of UG Cable in road crossing and making good the disturbed surface of road to its original specification, complete all as specified and directed.
117Diconnecting of all Lt Cable, MCCB from LT Panel, taking out the old LT panel and supply, Installation, testing & commissioning in repairs LT Panel cubical type out door floor mounted weather proof totally enclosed, (CPRI approved) factory made and made out of 3.15 mm thick CRCA powder coated sheet and angle iron 40x40x6mm size complete with bus bar of Aluminium of suitable size of capacity 1000 Amps 3 Phase and neutral 415 Volts 50 Hz mounted on epoxy type insulators mounted on PCC flooring and angle iron base frame complete all as specified and directed by Engr-in-Charge comprising of following accessories:- a) MCCB 250 Amps Cap, 4 Pole, 36 KA 415 volts-1 No for( I/C) b) MCCB 160 Amp cap, 4 pole, 36 KA, 415 Volts -1 Nos c) MCCB 100 Amp cap, 4 pole, 25 KA, 415 Volts - 2 Nos d) Digital Volt meter with selector switch(0-500V) - 01 Set e) Digital Amp meter with selector switch with necessary CT (0-500A) - 01 Set f) LED indicating lamp - 01 Set Note : (i) The Make of MCCB shall be Havells/L&T/ SIEMENS (ii) The rates shall deemed to be inclusive of suitable size copper wirinng/copper strips from Main I/C MCCBs to Change over switch, Change over switch to Main Bus bar and Bus Bar to Outgoing MCCBs complete all as specified and directed. (iii) The drawing & design of Panel, Make of complete accessories shall be approved by GE by the Contractor before order and execution at site.
118Deduct Schedule of Credit of Rs (-) 47004.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58462668
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 21.91 Lakhs
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Addition/ Alteration To Building T-81 (Sarv Dharam Sthal) Of 22 Weu Under Ge 865 Ews, Leh
Basic Detail
Tender No 865/EWS(NIT-137/2026-27
Bidding Type Tender
Location
City leh
State Ladakh
Key Dates
Publish Date 10 Nov 2026
Submission Date 02 Dec 2026
Open Date 10 Dec 2026
Finance
Tender Value 21.91 Lakhs
Tender Fee 500
EMD 43900
Exemption Available
Document List
9ff46bdb-7579-4c17-9769-02e1358df5ff.html
BOQ_895173.xls
TENDERNIT_137.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
html

9ff46bdb-7579-4c17-9769-02e1358df5ff.html

xls

BOQ_895173.xls

pdf

TENDERNIT_137.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender