Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #58462651

Tender For Special Repair To Flt Hangar (Bldg No P-120) Under Ge Missamari

Issued by Statutory Bodies & Commissions/Committees · Sonitpur, Assam
Tender Value
1.33 Crore
Estimated cost
Bid Submission
08 Dec 2026
16 days left
EMD
2.08 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Flt Hangar (Bldg No P-120) Under Ge Missamari

BOQ

Name of Work:-
Sl. No. Item Description
1Surface Preparation: Surface Preparation by removing existing flooring with mechanical means, prepare the concrete substrate with proper scarifying & diamond grinding, Shot blasting, with Vaccum cleaning to remove dirt, dust, laitance, other contaminants etc., and to form the required anchor profile on the floor substrate between the floor topping and the concrete floor complete all as specified and directed
2Floor Leveling (3mm thick)Providing and applying 2 part water dispersed epoxy resin primer Sikafloor ®-80 Epocem Primer or equivalent make like Fosroc/BASF/STP etc. followed by applying temporary moisturer barrier technology based three part, self smoothing underlay screed Sikafloor 81 Epocem or equivalent make like Fosroc/BASF/STP etc. to a thickness of 2mm having carbon dioxide diffusion coefficient 1782 as per Klopfer Engel fried method, Water vapour diffusion co-efficient µH2O = 177 as per DIN 52615, Water absorption co-efficient W = 0.06 kg/m2as per SN EN 1062-3, Compressive strength 55 N/ Sqmm after 28days as per ASTM C 579, Flexural strength 10 N/ Sqmm after 28days as per EN 196, When applied at minimum 3 mm thickness it can be laid over high moisture content substrate when substrate moisture is more than 4% complete all as specified and directed
3Installation of Epoxy topping 2mm using notch trowels and Spike rollers Providing and applying 2mm thick two part, solvent free, coloured,100% solids, self smoothing, smooth glossy, epoxy resin topping Sikafloor®-264 HC or equivalent make like Fosroc/BASF/STP etc. using notch trowels and spike rollers having compressive strength of 53 N/mm2 as per EN 196-1, Flexural strength of 20N/mm2 as per 196-1, Shore D Hardness 76 As per DIN 53 505, abrasion resistance 41mg ( CS10/ 1000/ 1000) as per DIN 53109. All in complete as per the manufacturers specifications and directions of the engineer in charge.
4Crack Treatment : Inspecting the surface for any cracks. Cracks if any have to be sealed with epoxy repair mortar after clean or removal of cover concrete and making 'V' groove of 20mm wide and 10mm deep cover crack line along the length of the crack by elctrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower complete all as specified and directed
5Sealing of exposed 'V' groove of 20mm wide and 10mm deep with Sikadur 31 or equivalent make like Fosroc/BASF/STP etc. solvent-free, moisture tolerant, thixotropic, structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40 °C. Product should conforms to ASTM C 881-78, Type I, Grade 3, Class B+C : compressive strength > 60 N/mm2 (14 days) according to ASTM C881 : bond strength < 10 N/mm2 (7 days) according to ASTM C882 complete all as specified and directed
6M&L for Preparation old painted taxiway marking and turning pads of runway surfaces i.e Painting lines, dashes, arrows, letters etc., exceeding 10 cm width or girth and applying 2 mm thick retro reflective white/yellow collour paint border marking as per existing, complete all as specified and directed
7Dismantling plain or corrugated steel sheeting any gauge, thickness complete all as specified and directed
8S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified complete all as specified and directed
9S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed
10Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed
11M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed
12M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed
13M&L for Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 complete all as specified and directed
14M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth complete all as specified and directed
15S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed in walls complete all as specified and directed
16S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed
17Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed
18Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed
19S&F 20mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor complete all as specified and directed
20S&F 25mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor complete all as specified and directed
21S&F in repairs CP towel ring squre complete all as specified and directed.code-CAN-1121N.
22S&F in repairs Corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 45 cm long complete all as specified and directed Make - Jaquar Code-ACN-1173
23S&F in repairs CP toilet paper roll holder with flap incl all necessary fittings. Make-Jaquar(Code-ACN-1151N) complete all as specified and directed
24S&F in repairs 15 mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
25S&F in repairs 15 mm bore, chromium plated fancy type, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
26S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed
27S&F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed
28S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromimum plated brass screws and cup washers complete all as specified and directed
29Dismantling water tanks and removing to store exc 500 & not exc 1000 ltrs complete all as specified and directed
30S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
31Demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc complete all as specified and directed
32M&L Brick Work with Sub-Class ‘B’ Bricks (with modular size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.
33Dismantlinig wrought iron or mild steel work of any description not otherwise proveded for.
34Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed
35Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed
36Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed
37S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.
38M & L for 4mm thick Non Asbestos designed Cement E board incl two coats of distempering over one coat of primer in one side as approved by GE of size fixed in ceiling as specified and directed.
39S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed
40S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares exceeding 0.50 Sqm in each pane complete all as specified and directed
41M&L for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed
42Supply and fixed aluminium wire cloth with 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.
43S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification complete all as specified and directed
44S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.
45S&F aluminium alloy 250mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy.
46S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed
47S&F 100mm aluminium butt hinges medium weight complete all as specified and directed
48S&F aluminium handle cast type anodised 150mm size complete all as specified and directed
49S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed
50S&F powder coated aluminium frame for doors, windows, ventileters, partitions with one or more rebates including joining cleat for fixing etc incl powder coating above aluminium section.(minimum thickness of powder coating 50 micron) complete all as specified and directed
51S&F powder coated aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws, locking arrangements, hinges, suitable handle etc powder coating of any colour(thickness of powder coating not less than 50 micron complete all as specified and directed
52S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws, necessary locking arrangement etc power coating of any colour (thickness of power coating not less than 50 micron.) complete all as specified and directed
53S & F aluminium body door closer hydraucally regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed
54S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed
55Supply and fix roof top Air ventilator/ Air circulator (Turbo ventilator) for Turbo Ventilators Industrial/domestic turbo ventilator as per Manufactureres Insturction :- (i) (Turbine Dia 28 Inch (760mm), (Nech/Throat-24\\"), (Height-18\\"/610mm) (Vanes(Blades) - 42 Vanes, Aluminium 0.50mm Alloy 8011), Base Ring MOC(Mounting ring - Stainless steel),(Top plate MOC- Stainless steel 0.80 mm thickness). (ii) Rotation - Twin sealed 6203ZZ bearing with self lubricating duponty zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity Twin sealed 6201ZZ bearings with self lubricating Duponty Zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity. (iii) (Centre shaft : 18mm high carbon steel zinc plated) ( Inner Arms - M.S. with electro zinc plating), (Outer Arms - M.S. with electro zinc plating), (Frp base plate - 2mm thick clear 1.020 mtr wide 1.65 mtr long matching your sheet profile weight 8Kg Approx), (Centre width - 800mm+/-5mm), (Dia of Bottom Ring- 600mm+/-15mm), (Nos of Bearings -02 Nos), (Bearing Type : skf-6001ZZ & 6003ZZ) (Rivets-Aluminium Alloy wiht Washer) ,angle adjustable range- 0 to 17 deg,Exhaust capacity- 1972 - 2164 CFM, Wind velocity 8 Km/Hr, Make:- Tubro Ventilator India (Industrial Ventilating Solutions) or Equivalent as approved by GE complete all as specified and directed.
56S & F of viterious china wash down water couple closet (EWC)size 760x635x300 mm tap distance S-220 mm. with cistern and seat cover Make-Jaquar-code-FNS-WHT-0921BS.including making good to floor.incl seat cover complete all as specified and directed
57Taking down Hanger door n exc 40 Sqm and refixing the same with suitable T & P in original position after repairing of door leaf, like bending, strengthening, cladding , including greasing in the top and bottom rail etc complete all as specified and directed
58S&F in repairs 15mm bore angular stop cock with flange screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete all as specified and directed .Make-Jaquar-Code-CON -059KN
59S&F in repairs 15mm bore bib cock with wall flange copper alloy screwed down high pressure with crutch or butter fly handdle screwed both end for iron pipe complete all as specified and directed .Make-Jaquar-Code-CON-041KN
60S&F in repairs 15 mm bore Pillar Tap fancy Type CP complete all as specified and directed make jaquar Code OPP-1500PM
61S & F Chromimum plated helth faucet shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish complete all as specified and directed.Make-Jaquar-Code-ALD-CHR-585
62M&L two coats of Aliphatic two component paint suitable for concrete and plaster surfaces, especially in exterior application incl preparation of surfaces and as per manufacturer instruction complete all as specified and directed. Make - STP or equivalent.
63Dismentling 1mm dia and 1\\"X1\\" apeture square or hexagonal multithread HDPE coplymer bird proofing netting ultra voilet resistent fixed with nylone rope with 4mm dia GI wire complete all as specified and directed
64S&F 1mm dia and 1\\"X1\\" apeture square or hexagonal multithread HDPE coplymer bird proofing netting ultra voilet resistent fixed with nylone rope with 4mm dia GI wire complete all as specified and directed
65S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors for hanger; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165)complete all as specified and directed
66Supply and fix in repair MS wheels of any size for hanger doors as per site requirement incl greasing complete all as specified and directed
67Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint complete all as specified and directed
68S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed
69Supply and fix solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed
70Dismantling and taking up unserviceable electric motors and Old Gear Box from foundations of door Hangar after disconnecting electric connection and depositing to MES store complete all as specified and directed. Please Enable Macros to View BoQ information
71Dismantling and taking up unserviceable electric motors and Old Gear Box from foundations of door Hangar after disconnecting electric connection and depositing to MES store complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58462651
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.33 Crore
LAST DATE 08-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Flt Hangar (Bldg No P-120) Under Ge Missamari
Basic Detail
Tender No 8673/E8
Bidding Type Tender
Location
City Sonitpur
State Assam
Key Dates
Publish Date 09 Nov 2026
Submission Date 08 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value 1.33 Crore
Tender Fee 1000
EMD 2.08 Lakhs
Exemption Available
Document List
5676727b-2909-499b-977d-a20e63a199af.html
BOQ_895222.xls
TENDERDOCUS8673.rar
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 24 days

Tender Documents

Download All (ZIP) ↓
html

5676727b-2909-499b-977d-a20e63a199af.html

xls

BOQ_895222.xls

rar

TENDERDOCUS8673.rar

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender