Tender For Addition/Alteration To The Compound Wall Of Ncos Block At Nda Khadakwasla.
Tender Value
43.67 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
15 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To The Compound Wall Of Ncos Block At Nda Khadakwasla.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 2 | M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 3 | M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for PCC 1:2:4 type B1 using 12.5 mm graded aggregate as in mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 5 | M&L for Factory made Precast cement concrete compound wall pillar/pole having Height 2.44m having top & bottom dimension 140 mm × 140 mm with groove of 45-55 mm for slab fitting reinforced with 6 Nos 4 mm HT wire fitted with two hooks of 6 mm for lifting etc as per sample complete all as specified and directed. |
| 6 | M&L Factory made Precast cement concrete slab/plate/pattiya having size 1.83 m × 0.30 m × 45 mm thick suitable to fit in pillars reinforced with 4 mm 5 Nos HT wire, design as per sample complete all as specified and as directed. |
| 7 | S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Structural steel work of angle, channel etc., confirming to Fe 410 -W (Gde- E- 250) quality - A complete all as specified and directed. |
| 8 | S & F Rolled Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed. |
| 9 | M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub base of floor, paving, path etc including formwork complete all as specified and directed. |
| 10 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 11 | M & L for painting the new wall surface white or tinted including scaffolding arrangement, trestles and ladders etc complete all as specified and directed as follows :- (a) Surface Preperation- Preparation of newly plastered or previously untreated surfaces of walls (b) Putty application- NIL (c) Priming surface- NIL (d) Painting- Applying two coats of cement base paint. |
| 12 | M & L for painting the new steel surface complete all as specified and directed as follows :- (a) Surface preperation- Preperation of new steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- Applying one coat of red oxide primer (c) Painting- Applying two coats of synthetic enamel paint. |
| 13 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 14 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and directed. |
| 15 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided including padding concrete on roof complete all as specified and directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 17 | Dismantling of security fencing any type (chain link, barbered wire, GI mesh etc) complete all as specified and directed. |
| 18 | Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete, masonary etc and making good the disturbed ground complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender