Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58462582

Tender For Special Repair To Certain Buildings At Likabali Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Dhemaji, Assam
Tender Value
95.50 Lakhs
Estimated cost
Bid Submission
07 Dec 2026
18 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dhemaji → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Certain Buildings At Likabali Mil Stn

BOQ

Name of Work:- SPECIAL REPAIR TO CERTAIN BUILDINGS AT LIKABALI MIL STN
Sl. No. Item Description
1Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
2M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
3M & L for 40 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.
4M & L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and as dircted
5Demolition in Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
6M&L 100 mm PCC 1:4:8 type D-2 (40mm graded stone aggregate) ,as in sub base for raised level complete all as specified and as directed.
7M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.
8M&L for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.
9M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade complete all as specified & as directed.
10Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
11S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & as directed.
12Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof coverings any thickness complete all as specified and as directed.
13S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
14S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
15Demolition of brick work or stone masonry or PCC block manonry built in cement mortar including all quoins, pillars, arches etc.complete all as specified and directed.
16M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.
17Taking down cement plaster of any description including racking out joints, hacking for keys , scrubing down with water etc complete all as specified.
18M&L preparation of new plastered surface of walls and applying two coat of cement base paint over a coat of alkali resistance primer, complete all as specified & directed
19M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 finished even and smooth without using extra cement, complete all as specified & directed
20M & L applying two coats of distemper oil emulsion paint over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering over a new or undecorated wall surface including preparation of surfaces complete all as specified and directed.
21M&L for preparation of old plastered surfaces of walls and applying two coat of cement based paint overa coat of alkal resistant primer complete all as specified & directed
22M&Lpreparation of old steel surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified & as directed.
23M&Lpreparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide,zink crome primer complete all as specified & as directed.
24Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed
25S&F Hangers 4mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long size of grid 605 x 605mm complete all as specified and as directed
26S&F anodised aluminium snap grid frame work for false ceiling of size of grid 605x605 mm complete all as specified and as directed
27S&F HSPC Non-Asbestos Fibre Cement Building Boards 6.0mm thick in Ceiling, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed.
28Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified & as directed
29S&F of 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq. m in each pane complete all as specified & directed.
30S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
31S&F Aluminium anodised frame for doors, windows, and ventilators with one or more rebates including jointing cleats for fixing etccomplete all as specified and directed.
32S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, side locks etc. complete all as specified & directed.
33S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15 ) of approved design/pattern ,with approved standard section and fixed to the existing window frame with CP ,brass/stainless steel scerw @200mm center to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening .complete all as specified & directed.
34Taking down shutters of any description exc. 1.5 sqm but not exc. 4sqm each complete all as specified & as directed
35S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6.0mm thick fixed with nails, complete all as specified & as directed.
36S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beadingscrews etc. complete all as specified & as directed.
37S&F 100mm size, stainless steel butt hinges, complete all as specified and as directed.
38S&F 150mm size, alumimium handle cast type anodised, complete all as specified and as directed.
39S&F floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring of overall length of cover plate 140mm fixed in floor complete all as specified & directed.
40S&F 150 mm long aluminum anodised barrel tower bolt of extruded section complete all as specified & as directed.
41S&F Aluminium alloy, anodised,sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified & as directed.
42S&F Aluminium body ( extruded section) Door closure hydraulically regulated designation No.3 universal type suitable for door shutters of 701 to 850 mm in width and weight between 36 to 60 Kg and fixed complete all as specified and directed.
43Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified & directed.
44Taking down the existing unserviceable main switches, DBs,bus bar chambers,,VTPN etc of any capacity including all fitting and fixtures such as MCBs,isolatorr etc and removing from site complete all as specified and as directed.
45M&L for Point wiring for One light point controlled by one way switch with two runs 1.5 Sq mm copper conductor single core FRLS (ISI Marked) PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC caping and casing of suitable size surface type and all fittings/fixtures such as TEE,Bend,elbow,socket,shadle etc of suitable size ISI marked and including MS sunken/modular PVC terminal boxes of suitable size including 3mm thick backelite sheet cover (if required) for mounting the modular type switches/sockets/regulators/ceiling rose etc including running up of 1.5 Sq mm copper conductor FRLS (ISI marked) PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified .(Note- (i) Rate quoted is deemed to include making good the disturbed surface and to match the adjoining surface(ii) Rate quoted is deemed to include cost of modular box,cover plate etc
46All as per Item No 45.00 above but for ceiling fan point wiring.
47All as per Item No 45.00 above but for exhaust fan point wiring.
48All as per Item No 45.00 above but One 3 pin socket outlet, 5 Amps, same board, with other switches.
49All as per Item No 45.00 above but One 3 pin socket outlet, 5 Amps, independent board,
50All as per Item No 45.00 above but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 3/6 pin socket outlet 15 Amps ,on Independent board
51S&F modular switch one way 6 Amp 1-way,1 module 230 Volt AC and connecting up complete all as specified and directed.
52S&F modular socket combination 6 Amp,2/3 pin,2 module 230V , complete all as specified and directed.
53S&F modular switch one way 16 Amp 1-way,1 module 230 Volt AC and connecting up complete all as specified and directed.
54S&F modular socket combination 6 Amp/16 Amp ,2/3 pin, 2 module 230V , complete all as specified and directed.
55S&F Ceiling Rose,65 x50mm, surface bakelite suitable suitable for 230 Volt AC and connecting up, 3 terminal complete all as specified and directed.
56S&F modular ceiling fan regulator 120 Watt-,2 module,230 Volt AC, electronic stepped type complete all as specified and directed.
57S&F LED Tube Light Fitting 1 x 20 Watt, 220 Volts, AC decorative box type with driver, holder incl LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
58Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
59S&F LED light fitting 1x10 Watt Bulkhead luminaires IP 65 rated with pressure die cast aluminium housing and acrylic diffuser,CCT:WW/NW/CW,CRI>80 Ra with open and short circuit protections as per IS :10322 with all accessories including lamp connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
60S&F LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistance complete with driver ,lamp bracket with impact and corrosion resistance including thermal management in multiple optics IP-65/66 protection complete all as specified and directed.
61S & F Angle holder,PVC/Polycarbonate type with back plate including LED bulb,15 Watt,B-22 lumen greaten than 900, CCT:WW/NW/CW,CRI>80 Ra over moulded plastic housing,polycarbonate diffuser,4Kv surge protection with over voltage withstand up to 440V(for 10 Minutes) with open and short circuit protection as per IS:1602 complete all as specified and directed. Please Enable Macros to View BoQ information
62S & F Angle holder,PVC/Polycarbonate type with back plate including LED bulb,15 Watt,B-22 lumen greaten than 900, CCT:WW/NW/CW,CRI>80 Ra over moulded plastic housing,polycarbonate diffuser,4Kv surge protection with over voltage withstand up to 440V(for 10 Minutes) with open and short circuit protection as per IS:1602 complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58462582
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 95.50 Lakhs
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Certain Buildings At Likabali Mil Stn
Basic Detail
Tender No 83125/E8
Bidding Type Tender
Location
City Dhemaji
State Assam
Key Dates
Publish Date 09 Nov 2026
Submission Date 07 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 95.50 Lakhs
Tender Fee 1000
EMD 1.68 Lakhs
Exemption Available
Document List
04e940f8-f2d5-48c6-b531-239c922a8afa.html
BOQ_895165.xls
Tenderdocument83125.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

04e940f8-f2d5-48c6-b531-239c922a8afa.html

xls

BOQ_895165.xls

pdf

Tenderdocument83125.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender