Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58462503

Tender For Providing Of Toilet Blocks At Certain Places Af Stn Najafgarh Under Ge (Af) Tughlakabad

Issued by Statutory Bodies & Commissions/Committees · Delhi, Delhi
Tender Value
14.56 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
10 days left
EMD
29120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Providing Of Toilet Blocks At Certain Places Af Stn Najafgarh Under Ge (Af) Tughlakabad

BOQ

Name of Work:- PROVN OF TOILET BLOCKS AT CERTAIN PLACES AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
Sl. No. Item Description
1Surface Excavation n exc 30cm deep ad averaging 15cm deep and getting out soft and loose soil complete all as specified and directed
2Excavating in trenches not exc 1.5m wide and not exc 1.50 m depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and getting out in any type of soil complete all as per specified and directed
3Excavating in trenches not exc 1.5m wide and exc 1.50 m depth, not exc 3.00 m depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and getting out in any type of soil complete all as per specified and directed
4Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
5Spreading, levelling in layers n.exc. 25cm thick n.exc. 25cm incl. Watering, well ramming with soil obtained from excavation complete all as specified and directed.
6Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.
7M&L PCC 1:4:8 type D2 (40mm Graded Aggregate in foundations, filling and mass concrete complete all as per specified and directed
8M&L RCC M-25 (20 mm graded stone aggr) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as per specified and directed
9M&L RCC M-25 (20 mm graded stone aggr) in Columns, pillars, piers, posts and struts complete all as per specified and directed
10M&L RCC M-25 (20 mm graded stone aggr) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as per specified and directed
11M&L RCC M-25 (20 mm graded stone aggr) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as per specified and directed
12M&L RCC M-25 (20 mm graded stone aggr) in chajja complete all as per specified and directed
13M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed
14M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed
15M&L for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for fair finished flat surfaces of concrete complete all as specified and directed
16M&L for formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work, not exceeding 200 mm thickness (horizontal or sloping) with fair finished surfaces of concrete complete all as specified and directed.
17M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges with fair finished surfaces of concrete complete all as specified and directed.
18M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as per specified and directed.
19M&L TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spi-rally hooping for columns, hook-ing ends and binding with and including mild steel wire (an-nealed) not less than 0.90mm dia, complete all as specified.
20M&L TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as per specified and directed
21M&L bricks works with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in (1:6) all as specified and directed.
22M&L for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface complete all as per specified and directed
23M &L 75mm thick Cement concrete type D-2,1:4:8 (20mm graded aggregate) as in sub base all as per specified and directed
24M&L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as per specified and directed
25M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
26M&L for non skid ceramic tiles 7 to 8mm thick (square / rectangular ) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed by Engineer-in-Charge.
27M&L 450x350x7/350 x 250 x 7mm thick glazed ceramic coloured tiles as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed
28M&L for rendering 10 mm thick on fair faces of brick/concrete work CM (1:4) rough to received tiles rough finished complete all as specified and directed by Engr-in-charge
29M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection/path/paving laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as per specified and directed
30M&L rendering 15 mm thick in CM 1:4 on stone masonry surfaces or on other than fair faces of brick masonry finished fair and even complete all as specified and directed.with water proofing compound at the rate of 3% by weight of cement or as per the manufacturer’s instructions Note: WPC shall be measured and paid for separately all as per specified and directed by engineer in charge.
31Supply only integral water proofing compound complete all as specified and directed by Engr-in-charge.
32M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information
33M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58462503
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 14.56 Lakhs
LAST DATE 01-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Providing Of Toilet Blocks At Certain Places Af Stn Najafgarh Under Ge (Af) Tughlakabad
Basic Detail
Tender No GE/TKD-85 of 2026-27
Bidding Type Tender
Location
City Delhi
State Delhi
Key Dates
Publish Date 09 Nov 2026
Submission Date 01 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 14.56 Lakhs
Tender Fee 500
EMD 29120
Exemption Not Available
Document List
3a167bc0-8988-40cc-9ba2-a718ee552a82.html
BOQ_895147.xls
Tendernotice_1.pdf
Tender_Doc.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 01, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

3a167bc0-8988-40cc-9ba2-a718ee552a82.html

xls

BOQ_895147.xls

pdf

Tendernotice_1.pdf

pdf

Tender_Doc.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender