Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #58462404

Tender For Special Repair To Bldg No P-36 (Or Living) At Old Ilp Loc Engr Regt At Missamari Mil Stn Under Ge Missamari

Issued by Statutory Bodies & Commissions/Committees · Sonitpur, Assam
Tender Value
1.37 Crore
Estimated cost
Bid Submission
07 Dec 2026
18 days left
EMD
2.12 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No P-36 (Or Living) At Old Ilp Loc Engr Regt At Missamari Mil Stn Under Ge Missamari

BOQ

Name of Work:-
Sl. No. Item Description
1Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and as directed.
2Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and as directed.
3S & F (125 x 60 mm) Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,complete all as specified and as directed.
4S & F (105 x 60 mm) Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.
5M&L for cement concrete 1:3:6, type-C-0 (12.5mm graded stone aggrgate) as in filling in steel frame/roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed.
6S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
7S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. complete all as specified and as directed.
8S & F Solid pvc Door Frame of size (100 mm x 45 mm) made out of 5 mm wood grain colour PVC Sheet reinforced with MS Square etc. complete all as specified and as directed.
9Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed.
10S&F anodised aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron). complete all as specified and as directed.
11S&F for anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron). complete all as specified and as directed.
12S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165 complete all as specified and as directed.
13Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
14Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified and as directed.
15S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed.
16S & F 4 mm thick frosted glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed.
17Supplyand fixed Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
18M&L 18/19 mm thick pre-laminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in alum frame work complete all as specified and as directed.
19M&L for Plain Cement Concrete Type B1 (1:2:4) (using 20 mm graded granite stone aggregate) as in hold fast complete all as specified and as directed.
20S&F mild steel flat iron of size (50 x 3 mm) as in hold fast complete all as specified and as directed.
21S & F 100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21 complete all as specified and as directed.
22S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed complete all as specified and as directed.
23S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
24S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
25S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.
26Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed.
27Glazed ceramic coloured tiles in vertical surfaces (300 x 600 x 7 mm) thick set and jointed in neat cement slurry & painted in white or colour cement to match incl plaster 10 mm thick plaster in CM 1:4 complete all as specified and as directed.
28M&L Non - skid Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of size (300 x 300 mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed.
29M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) (600 x 1200 mm) , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed.
30Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc complete all as specified and as directed.
31M& L Providing and laying Heavy Duty Homogenous Vitrified Tiles of Size (600 x 600 mm /800 x 2400 mm) of thickness not less than15 mm with water absorption of <0.08% and conforming to IS:15622: group B1 of approved make/ Color and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) providing gap of suitable spacer between the tiles with support of spacers, including grouting the joint with epoxy grout, and matching pigments etc., complete all as specified and as directed.
32M& L Providing and laying Heavy Duty Homogenous Vitrified Tiles of Size (600 x 600 mm /800 x 2400 mm) of thickness not less than15 mm in skirting with water absorption of <0.08% and conforming to IS:15622: group B1 of approved make/ Color and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) providing gap of suitable spacer between the tiles with support of spacers, including grouting the joint with epoxy grout, and matching pigments etc., complete all as specified and as directed.
33Demolition Of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as directed.
34M&L for M15 (B0) (1:2:4) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
35M & L for TMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, hooking etc binding with mild steel wire not less than 0.90 mm dia (annealed) complete all as specified and as directed.
36Demolition Of Un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as directed.
37M&L for 75 mm thick cement concrete as in plinth protection/ path etc type C-2 (1:3:6) (using 40 mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and as directed
38Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
39Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.
40M&L for half brick work burnt modular bricks built in cement mortar 1:4 straight or curved on plan exceeding 6 mtr mean radius complete all as specified and as directed.
41M&L for brick work with burnt modular bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and all as directed.
42M&L for 15 mm thick plaster in two layers on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight of cement face of conc work to wall surface and the surface is finished even and smooth without using extra cement.WPC paid separetely complete all as specified and as directed.
43M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth complete all as specified and as directed.
44M&L rendering 5 mm thick of cement plaster (1:3) on concrete surfaces of ceiling finished even and smooth(without using extra cement.) complete all as specified and as directed.
45Supply only Integral water proofing compound complete all as specified and as directed.
46M&L for water proofing treatment to RCC roof slab, Preparation and complete removal of existing treatment line chipping of unsound weak/ loose concrete/cover removal of dust and cleaning the surface with blower complete and providing and applying single component elastomeric polyurethane coating Sikalast 590 in three coats, 1st layer of primer with 10% dilution with water followed by 2nd coat and 3rd coat complete as per manufacturer specification over and including 10 mm thick rendering in cment mortar 1:4 mixed with water proofing compound complete all as directed by Engineer-in-Charge.(Note-Work shall be carried out by specialized applicator of manufactures.)
47Taking down rain water pipes inculding all fittings any size and pattern complete all as specified and as directed.
48S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
49S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls complete all as specified and as directed.
50S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.
51S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.
52S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.
53S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed.
54M&L 75 mm bore for cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
55M&L 75 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
56Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed.
57Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed.
58Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed.
59Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
60Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
61Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
62S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalen make / model with all accessories complete all as specified and as directed.
63S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size (550 x 400 mm) size including cutting for and pinning ends of brackets or erecting stand and waste pipe as requred complete all as specified and as directed.
64S&F Vitreous China squatting pan \\"Orissa\\" patern size (630 x 450 mm) white with integral foot rest (Excluding flushing cistern & flush pipe) complete all as specified and as directed.
65Supply & Fix Vitreous EWC size (580 x 440 mm) white with includig 'P' or 'S' traps complete all as specified and as directed.
66S &F in repairs Vitreous china urinals, bowl typeflat back size (465 x 355 x 265 mm) whiten minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws complete all as specified and as directed.
67PVC connection 15 mm bore 450 mm long complete all as specified and as directed.
68S & F in repairs 15 mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.
69S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.
70S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
71S&F in repairsTowel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.
72Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint complete all as specified and as directed.
73Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint complete all as specified and as directed.
74Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty complete all as specified and as directed.
75M & L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty complete all as specified and as directed.
76M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to preparatory to distempering complete all as specified and directed over 1 mm thick wall care putty complete all as specified and as directed.
77M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty complete all as specified and as directed.
78Preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash complete all as specified and as directed.
79M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
80Dismantling PVC/RCC water tanks and removing to store exc 500 & not exc 1000 ltrs complete all as specified and as directed.
81S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
82Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
83M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified.
84M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.
85Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors complete all as specified and as directed.Note: Water proofing compound will be measured separately
86M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors complete all as specified and as directed.
87M & L for plain cement concrete Type E2 (1:5:10) (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
88M & L for plain cement concrete Type B2 (1:2:4) (using 40mm graded granite stone aggregate) in floor sub base and mass concrete complete all as specified and as directed.
89M & L for granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed (1:6) CM in floors complete all as specified and as directed.
90S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar of dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size (915 mm x 460 mm) bowl size (410 mm x 330 mm x 160 mm) complete all as specified and as directed.
91Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface complete all as specified and as directed.
92Taking down the existing unservicable main switch /change over / cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. .
93Taking down carefully unsv aluminium submain wiring of any type /loc including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes complete all as specified and as directed.
94M&L concealed point wiring for One light point/Ceiling fan/Exhaut fan/bell point controlled by one way switch 5/6 amps complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated suken modular terminal box made out of MS sheet steel of adequate thickness boxes duly painted with aluminum inside and anticorrosive paint outside,(clear depth of the box not less than 60mm and this shall be increased suitably to accomadiate flush type regulators) concealed in walls, with modular frame plate of adequate sizs sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed complete all as specified and as directed.Notes:-(i) Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles. (ii) Where concealing of conduit is not feasible i.e. on surface of RCC roof slab, beam etc, conduit shall be fixed on surface with necessary saddles at no extra cost.(iii) Cost of modular switches Sockets will be measured and paid separately
95(a) One light point controlled by one, one way switch 5 Amps
96(b) One 3 point 5 Amps socket outlets point controlled by one switch on the same board
97(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board
98Description all as per item No 94.00 here in above but for one light point controlled by one, two way switch 5 Amps
99All as per item No 94.00 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board complete all as specified and as directed.
100S & F Modular Switch , single pole one way 6 Amps , 1 module , 230 Volts complete all as specified.
101S & F Modular switch piano two way, 6 amps 1 module, 230 volts.complete all as specified and directed.
102S & F Modular Socket , 2 /3 pin combined, 6 Amps , 2 module complete all as specified and directed.
103S & F Modular Switch , single pole one way 16 Amps , 1 module , 230 Volts complete all as specified.
104S & F Modular Socket , 2/3 pin combined , 16 Amps , 2 module complete all as specified and directed.
105S&F ceilling rose (White) three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified
106S & F modular ceiling fan regulator step type 2 Module, heavy duty suitable to work on 230 Volt AC supply complete all as specified.
107S & F Lamp holder (White) with insulated body, with back plate suitable for batten fittings complete all as directed.
108S & F LED ADORE 10 W B22 CDL LAMP with B 22 base capacity 1200 lumen complete all as specified.
109S & F sheet metal enclosure MCB VTPN 12 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 200 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed.
110S & F MCCB 4 Pole 415 volts 200 Amps with thermal - magnetic release with breaking capacity 16 KA and with adjustable overload setting complete all as specified.
111S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete all as specified .
112S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system complete grouted on walls complete all as specified.
113S & F sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with locking system complete grouted on walls complete all as specified.
114S & F RCBO,s for earth leakage , overload and short circuit protection Four Pole 415volts , 30mA, suitable for fixing in MCB TPN DB of capacity 63 amps complete all as specified and directed.
115S & F RCBO,s for earth leakage , overload and short circuit protection Double Pole 230volts , 30mA, suitable for fixing on MCB DB of capacity 32 Amps complete all as specified.
116S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed.
117Supply and fixing LED lights fitting 1x 20W, luminous efficacy not less than 110 lumen/watt , 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
118S&F decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provision of LED bulb 09 watts complete all as specified and as directed.
119S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 35/36 watts luminous efficacy not less than 110 lumen/watt with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.
120Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with proper cleaning/ painting of any sweep complete all as specified and as directed.
121M&L for replacement Sub main wiring 4 x 6 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
122M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor duly cutting chases on walls and drawn through and including non-metalic Rigid PVC Conduit ISI marked and its accessories including one run of single core 6.0 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board with proper copper lugs and making good disturbed surfaces and matching with existing colour complete all as specified and directed.
123Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed.
124Supply & Laying XLPE LT heavy duty UG Cable of size 95 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.
125Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as specified and as directed.
126Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
127Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.
128M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as specified and as directed.
129Supply & Laying well burnt brick , locally available best quality (sub class \\"B\\" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.
130S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc complete all as specified and as directed.
131Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia connected to main earthing lead from earth electrode to test point upto 7.5 metre drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I. complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58462404
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.37 Crore
LAST DATE 07-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No P-36 (Or Living) At Old Ilp Loc Engr Regt At Missamari Mil Stn Under Ge Missamari
Basic Detail
Tender No 8672/E8
Bidding Type Tender
Location
City Sonitpur
State Assam
Key Dates
Publish Date 09 Nov 2026
Submission Date 07 Dec 2026
Open Date 14 Dec 2026
Finance
Tender Value 1.37 Crore
Tender Fee 1000
EMD 2.12 Lakhs
Exemption Available
Document List
487ece39-c3fb-4c4c-916a-1e4aaa17bc38.html
BOQ_895120.xls
Tenderdocus8672.rar
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 25 days

Tender Documents

Download All (ZIP) ↓
html

487ece39-c3fb-4c4c-916a-1e4aaa17bc38.html

xls

BOQ_895120.xls

rar

Tenderdocus8672.rar

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender