Defence Statutory Bodies & Commissions/Committees Closing in 7 days TDR #58462021

Tender For Special Repairs To Civilian Married Accn At Afs Yelahanka.

Issued by Statutory Bodies & Commissions/Committees · Bengaluru Urban, Karnataka
Tender Value
46.01 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
92038
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repairs To Civilian Married Accn At Afs Yelahanka.

BOQ

Name of Work:- SPECIAL REPAIRS TO CIVILIAN MARRIED ACCN AT AFS YELAHANKA.
Sl. No. Item Description
1Demolition of lime concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
2M&L Plain cement concrete 1:5:10, E2 type with (40mm graded stone coarse aggregate) in sunken floor complete all as specified and directed.
3M&L Treatment of sunken floor slab comprises of the following specifications and all as specified.(i) Taking down old treatment and clear the RCC slab and wall surface for full depth of sunken floor / lowered portion by wire brush chisel out any mortar and sticking the surface.ii) Provided 40 mm average thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in levelling course to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed.(iii) M&L for 10mm thick cement plaster in CM 1:4 with integral water proofing compound on any type of surface finished fair and even complete all as specified and directed.(iii) Apply FOSROC Nito proof 600PF (minimum 0.8mm dft) over a priming coat of Nito proof WB Primer or equivalent product of Asian Paints / M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr Fixit / Thermax / STP as per manufacturer’s instructions to bottom and full vertical sides of sunken floors complete all as specified.(iv) Fill it with water and check for dampness and seepage. In case the slightest indication of seepage / leakage is noticed, then apply additional coat of water proofing material complete all as specified and directed.Note: Supply only WPC (integral /Liquid) shall be measured and paid separately vide relevant item of this schedule.
4Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description including cleaning and disposal of debris outside the premises complete all as specified and directed.
5M&L 10mm thick cement plaster in CM 1:6 on stone masonry surfaces or surface other than fair face of brick-work finished fair and even complete all as specified and directed.
6M&L 15mm thick cement plaster in CM 1:4 on stone masonry surfaces or surface other than fair face of brick-work finished even & smooth without using extra cement complete all as specified and directed.
7M&L 5mm thick cement plaster in CM 1:3 on brick work or concrete as ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.
8M&L Racking out joints/ pointing to squared rubble masonry, coursed or uncoursed built in cement or cement lime mortar complete all as specified and directed.
9M&L for Keyed pointing in Cement mortar 1:4 to squared rubble, coursed or uncoursed rubble complete all as specified and directed.
10M&L for preparing the new plastered surfaces of wall and applying a coat of primer & two coat of oil bound distemper over 2mm thick wall care putty in two layer complete all as specified and directed.
11M&L for complete removal of existing treatment from wall surface and applying a coat of primer & two coat of oil bound distemper over 2mm thick wall care putty in two layer complete all as specified and directed.
12M&L for preparing the new plastered surfaces of ceiling and applying a coat of primer & two coat of oil bound distemper over 2mm thick wall care putty in two layer complete all as specified and directed.
13M&L for complete removal of existing treatment from ceiling and applying a coat of primer & two coat of oil bound distemper over 2mm thick wall care putty in two layer complete all as specified and directed.
14M&L for preparing the new plastered surfaces and applying a coat of primer & two coat of cement base paint complete all as specified and directed.
15M&L for preparing the new plastered surfaces of ceiling and applying a coat of primer & two coat of cement base paint complete all as specified and directed.
16Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and directed.
17M&L brick work with subclass B brick straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
18M&L for brick work with subclass B brick straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
19Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointing in any mortor complete all as directed and specified.
20M&L machine cut Kota stone (greenish colour, mirror polished) slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing, over & including 20 mm thick in CM (1:6) screed bed complete all as directed and specified.
21Ditto all as per item No.20 above but as in skirting over & including backing layer of 10 mm thick in CM (1:4) complete all as directed and specified.
22M&L machine cut Kota stone (greenish colour, pre polished) slab in one piece as in cill / staircase treads flooring 18 to 20 mm thick over and including 15 mm thick in CM (1:6) screed bed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, polishing and necessary bull nosing complete all as specified and directed.
23Ditto all as per item No.22 above but as in riser (should be one piece) over & including 10 mm thick in CM (1:4) complete all as specified and directed.
24Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.
25M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.
26M&L Non - skid-coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including bedding layer of 20 mm thick in CM (1:6) complete all as directed and specified.
27M&L Non - skid-coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick in CM (1:4) complete all as directed and specified.
28Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
29M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.
30M&L Glazed coloured Ceramic tiles of size 300mmX600mm thickness 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished complete all as specified and directed.
31Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
32M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in shelves complete all as specified and directed.
33M&L TMT bars 6 to 8mm dia. and over cut to length bent to shape required including cranking spirally for hooking ends and binding with and including MS wire annealed n. less than 0.9mm dia. complete all as specified and directed.
34M&L for 15-17mm thick Granite (of any type) work (table rubbed and polished) in steps, rise, jambs pillar window cills, cooking platforms and including 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary bull nosing / moulding / holes for gas pipe and polishing to edges of granite slab complete all as specified and directed.
35S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm including sink coupling all as specified and directed.
36S&F in repairs sink cock fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as specified and as directed.
37S&F Stainless steel Plate Rack 0.75 Mtr x 0.90 Mtr complete all as specified and as directed.
38Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
39Taking up or down 25 or 32mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
40S&F 20mm dia of CPVC pipes SDR 11 including all CPVC SDR 11 fitting such as elbow/brass elbow, Tee, Socket, reducer/adopter plain/Brass fittings, clamps etc and necessary cutting grooves or chases and making good after laying as on wall / ceiling or in floors complete all as specified and directed.
41S&F 25mm dia of CPVC pipes SDR 11 including all CPVC SDR 11 fitting such as elbow/brass elbow, Tee, Socket, reducer/adopter plain/Brass fittings, clamps etc and necessary cutting grooves or chases and making good after laying as on wall / ceiling or in floors complete all as specified and directed.
42S&F in repairs 25 mm bore gun metal globe or gate valve complete all as specified and directed.
43S&F in repairs vitreous China squatting pan 'Orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engineer-in-charge.
44S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.
45S&F in repairs vitreous China ware wash hand basin white, angle back, size 550 x 400 mm with CP waste coupling including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.
46S&F in repairs CP Brass centre hole basin Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed.
47S&F in repairs Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed.
48S&F in repairs CP Brass 2-in-1 wall Mixer hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed.
49S&F in repairs for 15mm bore Stop valves / angle cock, cast copper alloy chromium plated fancy type, screwed both ends for iron pipe or for unions complete all as specified and directed.
50S&F in repairs Brass chromium plated shower rose 125mm incl arms with swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed.
51S&F in repairs bib taps 15mm dia chromium plated fancy type long body with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
52S&F in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed complete all as specified and directed.
53S&F in repairs CP Towel ring fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
54S&F in repairs Stainless steel Soap dish as approved by EIC fixed with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.
55S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
56S&F for 32/40mm waste pipe of length not less than 600mm complete all as specified and directed.
57S&F HDPE PVC pipes of pressure rating 6 kgf/Sq.cm of 40 mm bore fixed complete to walls, ceiling or in floors including bend and sockets, Tee etc. any type of pipe complete all as specified and directed.
58S&F Corner glass shelf of size 300x300mm with assembly of CP as approved by EIC and fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
59S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass decorative type, mounted in PVC frame fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed.
60Supply and fixed PVC Cabinet mirror of size 600 x 450 x125 mm complete all as specified and directed.
61S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
62Taking down shutters of any description exc. 1 sqm and n exc. 2 sqm each complete all as specified and directed.
63Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc. 1.50 sqm of any description complete all as specified and directed.
64Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exc. 4.00 sqm of any description complete all as specified and directed.
65S&F powder coated anodised aluminium frame / track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc. fixed or sliding type / louvered window or ventilator without sash bar, including necessary joining & fixing, cleats, glazing clips, rubber packing, soundproof window sealing strips, anodised aluminium snap beading, screws and locking arrangement etc complete all as specified and directed.
66S&F aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to alu door, wooden beadings to wooden doors complete all as specified and directed.
67S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n exc. 0.5 sqm in each pane complete all as specified and directed.
68S&F 4mm thick figured glass, pin head type and glazing with uPVC material beads in square n exc. 0.5 sqm in each pane complete all as specified and directed.
69M&L for fabrication of framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 & fixed in position complete all as specified and directed.
70M&L for Preparation of new or previously untreated surfaces of steel or steel-based materials of any description not otherwise described, over 10cm width or girth and applying one coat of red oxide primer and two coat of synthetic enamel paint complete all as specified and directed.
71M&L for preparation of old painted surfaces of steel or steel-based materials of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
72M & L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and one prelaminated side with different design and other side plain white of density not less than 600kg/cum the 18mm board should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity including all fittings like handle, auto closing hinges, magnetic catcher, and runner channel for kitchen cabinet complete all as specified and directed.
73S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10cm complete all as specified and directed.
74S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15cm complete all as specified and directed.
75S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20cm complete all as specified and directed.
76S&F 35mm thick factory made moulded PVC door shutter with 2, 4 or 6 raised panel design consisting of solid core single leaf flush shutter of 30mm thickness, lipped with 15mm (5mmx3) thick on one stiles and top rails & 10mm (5mm x 2) thick on other rail stiles and bottom rails, front face laminated with 2mm thick prelam or walnut colour PVC sheet in moulded design with 2, 4 or 6 raised panel and 2mm thick prelam or walnut colour PVC sheet on other side. PVC sheet having density 600kg/Cbm and should be termite proof, water proof & fire proof and fixing with the frame at site as per manufacturer specification and complete all as specified and directed.
77S&F PVC door frame of size 100mm x 45mm with a wall thickness of 5mm, made out of extruded 5mm prelam PVC sheet of density 600kg/Cbm, meter cut at two corners and jointed with 4 Nos of 150mm long brackets of 15x15mm MS square tube. The two vertical door frames to be reinforced with 40x20mm MS tube of 19 gauge throughout the frame and fixing in opening as per manufacturer instruction and complete all as specified and directed.
78M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
79M & L for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
80S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately)
81S&F for factory made 30mm thick Solid WPC (Wood polymer Composite) Wire mesh-Door-Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension rade), calcium Carbonate and natural fibers (Wood Powders/rice husk/wheat husk) and Nontoxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cum, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be panelled with and including mesh with self-tapping round headed screws at required distance, screws and edges covered with feathered pvc edge beading all-around of mesh and fixing helical door spring of 300 mm length complete all as specified and as directed.Note: 1. The rate of 300 mm helical door spring of is inclusive in this item 2. The rate of Mosquito mesh and XTN aluminium mesh is included in this item.
82S&F 100mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed complete all as specified and directed.
83S&F extruded brass handle 150mm fabricated type polished complete all as specified and directed.
84S&F brass, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified and directed.
85S&F brass, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.
86S&F floor door stopper of brass two leg of 75mm and overall length of 90 mm complete all as specified and directed.
87S&F door closer hydraulically regulated of aluminium (extruded section), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
88M&L for removing the existing unserviceable tar felt or any type of roof treatment of any description and any thickness from roof slab along with screed bed and PCC including cleaning the surface etc and removing debris from the site complete all as specified & directed.
89M & L for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) addition and including WP+ 200 of UltraTech / Shali Plast LW+ of STP / Pidilite URP of Dr. Fixit or equivalent as approved and per manufactures instruction Before laying concrete surface shall be cleaned and a bond coat of slurry with Shali Crete URP (of STP) or equivalent with cement to be applied. All cracks in slab to be opened in 'V' groove and filled with Shali Fix RMC a Polymer Morter of STP/ equivalent complete all as specified and directed.
90Material and labour for rendering 15mm thick in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed.Note: - Water proofing compound will be measured and paid separately under relevant item
91Supply only approved integral water proofing compound.
92M&L for laying/fixing TPO membrane of non-flammable water proofing of roof which shall be a 1.50 mm thick loose laid membrane using FOSROC Proofed ORG membrane or its equivalent in STP/CIPY/SIKA/PIDILITE DR FIXIT, in layers overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the rolled either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non-woven geotextile fibre. The separation layer provided to prevent the mechanical abrasion and cushioning between the fosroc proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring complete all as specified and directed. Note: Work shall be executed by authorized applicator with prior experience of more than 5 years on applying similar system.
93S&F in repairs 75mm dia PVC (SWR) floor trap, plain with and including CP grating jointing with solvent cement complete all as specified and directed.
94Taking down eaves gutter and rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed.
95S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall with clamps suitable for 110mm pipe as approved by EIC complete all as specified and directed.
96S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
97S&F PVC (SWR) bends (any radius) with access door for pipes 110 mm bore diminishing pieces or tapers on walls complete all as specified and directed.
98S&F PVC (SWR) branch piece, double (double Y or T) equal or unequal with access door for 110mm bore pipe diminishing pieces or tapers on walls complete all as specified and directed.
99S&F PVC (SWR) 110mm vent cowl complete all as specified and directed.
100S&F PVC (SWR) 75mm bore pipes in any length with rubber ring joints fixed to wall with clamps suitable for 75mm pipe as approved by complete all as specified and directed.
101S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
102S&F PVC (SWR) bends (any radius) with access door for water pipes 75mm bore diminishing pieces or tapers on walls complete all as specified and directed.
103S&F PVC (SWR) branch piece, double (double Y or T) equal or unequal with access door for 75mm bore pipe diminishing pieces or tapers on walls complete all as specified and directed.
104S&F PVC (SWR) 75mm vent cowl complete all as specified and directed.
105Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.
106M&L 75 mm thick cement concrete type B-2, 1:3:6 (20 mm graded stone aggregate) for plinth protection complete all as directed and specified.
107M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ thickness of slab 100mm below complete all as specified and directed.
108M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in sub base complete all as specified and directed.
109M & L for coloured and glossy machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade jointed with grey cement and pigments complete all as specified and directed.
110M & L for sand filling in bedding layer for laying floor finished or in foundation including watering and consolidation complete all as specified and directed.
111M&L for Writing letters or figures (Block, Roman, italic or Indian) n exc. 30cms height etc. complete all as specified and directed.
112S&F for number plate made out of 3mm thick acrylic sheet and size 100mm x 200mm including written 6 numeric letter height not less than 65mm (colour, design & pattern as approved by EIC) fixed with CP brass screws complete all as specified and directed.
113S&F for stainless steel cloth hanger peg set of 6 of premium quality fixed with CP brass screws complete all as specified and directed.
114S&F prefabricated cast iron work grade FG 150, unmachined in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors. dampers, stop valve boxes, balusters and similar works (weight of each articles exceeding 5 kg) complete all as specified and directed.
115Supply and fixing for in repairs 20mm dia. stainless steel curtain rod thickness not less than 1.5mm are made of SS-304 with a perfect glossy mirror finish as approved complete all as specified and directed.
116Supply and fixing for in repairs stainless steel fancy types domes cum brackets suitable for 20 mm dia. curtain rod as approved fixed over 1st class hard wood rounded wooden blocks of 65mm dia. and 20mm thick fixed to stone wall/Brick wall using screws including necessary drilling & finished with polishing and fixed to both ends with the curtain rod etc complete all as specified and directed.
117S&F for pully operated clothes drying system pully it 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer dia. 22mm and inner dia. 19.80 mm and pully made up of darling with rope guide mounted on channel pair of length 24\\"(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self-tapping screws provided with kit rope will be polyester braided undyed of 3.5+0.50mm dia. complete all as specified and directed.
118S&F preprinted galvalume alu zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fix with self-tapping screws with necessary washers/welding including taking down old sheet complete all as specified and directed.
119Removing excavated materials or demolished materials to exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.
120Taking up/down 15 mm steel tubing of the following sizes and disconnections of fitting, joints from tubing where required complete all as specified and directed
121Supply and laying GI tubing of 15 mm sizes in walls/ceilings or laid in floors of medium grade ISI marked including all types of fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc and accessories complete all as specified and directed
122Supply and laying GI tubing of 20 mm sizes in walls/ceilings or laid in floors of medium grade ISI marked including all types of fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc and accessories complete all as specified and directed
123Supply and laying GI water tubing of 25 mm sizes in trenches medium grade ISI marked incl all types of fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc and accessories complete all as specified and directed
124Dismantling/Taking down the existing 1000L water tanks and S&F Rotational moulded polyethylene water storage tanks (3 Layer) of capacity 1000Ltr (cylindrical vertical with closed top) along with tank cover hoisted and fixed in position along with all necessary fittings like tank nipple, elbow, bend, short GI Pieces, collar etc complete all as specified and directed.
125S&F in repair Ball valves of 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed along with all necessary fittings like nipple, socket, etc complete all as specified and directed.
126Excavation in trenches in hard/dense soil not exceeding 1.5 mtr width and not exc 1.5 mtr deep for laying of pipe Hard dense soil etc and getting out complete all as specified and directed.
127Returning, filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick hard soil complete all as specified and directed
128Removing surplus soil to a distance 50 mtr and deposit where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
129Supply and fixing in repair Gun metal gate valve/globe valve of 20mm sizes ISI marked with Iron wheel head screwed both end for GI tubing complete all as specified and directed
130Taking down existing unserviceable point wiring of any type/ size of light/fan/socket/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as specified and directed.
131Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified & directed.
132Taking down existing unserviceable Distribution boards any capacity complete all as specified & directed.
133Taking down existing unserviceable MCB's/MCCB's any capacity complete all as specified & directed.
134Taking down existing unserviceable submain wiring complete all as specified and directed.
135Taking down earthing material complete plate and pipe etc from 2.25 mtrs depth complete all as specified and directed.
136M&L for Point wiring one light/bell point controlled by one, one way switch complete with 1.5 Sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non-metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc complete all as specified and directed.
137All as per item No 136 herein before but one ceiling/exhaust fan point controlled by one, one way switch though modular regulator.
138All as per item No 136 herein before but for one 05 Amps socket outlet point on same board.
139All as per item No 136 herein before but for one switch socket outlet point 5 Amps on independent board.
140All as per item No. 136 here-in-before but with copper conductor cable FRLS, 4.0 Sqmm for one 3 pin socket outlet, 15 Amps and including 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.
141All as per Sl item No. 136 here in before, but for One Bell point controlled by one, one-way modular switch 5 amps, SP.
142All as per Sl item No. 136 here in before, but for One light point controlled by two 2 - w a y modular switch 5 amps, SP.
143S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and directed.
144S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and directed.
145S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
146S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and directed.
147S & F Modular Bell Push 6A, 1 Module with bell symbol complete all as specified and directed
148S & F Modular switch 2 way 6 Amps, 1 Module complete all as specified and directed
149S & F Modular ceiling fan regulator stepped socket size, 2 module suitable to work on 230 volts complete all as specified, complete all as specified and directed
150S&F calling bell ding doing working on 230 volts AC with different ring tones optional complete all as specified and directed.
151S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.
152S&F 3 in 1 LED 4 ft batten 20 Watt (warm white, Neutral white, cool white), aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated life 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed .
153S&F inverter LED 4 ft batten 20 Watt, 6500K with square profile and polycarbonate channel, lithium-ION battery with charging time 8 Hours -10 Hours and backup time up to 4-hour r and connector block complete all as specified and directed.
154Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10-watt 220 V A decorative type with driver holder and LED lamp including connecting up with three core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.
155S&F LED light fitting 10Watts bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 outdoor type metal body of suitable size complete all as specified and directed.
156S&F surface type downlight circular/square 12 W, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable appropriate size from ceiling rose to the fixture complete all as specified and directed.
157S&F LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant, efficacy not less than 120 lm/Watts, rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
158M&L for wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed
159S & F MCB SP 6 to 32 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and directed
160S & F MCB SPN 40 to 63 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and directed
161S & F MCB TPN,63 Amps, rupturing capacity 10 KA 415 volts suitable for fixing in existing DB of any capacity complete all as specified and directed.
162S & F sheet metal enclosure MCB DB SPN 2-way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and directed.
163S & F sheet metal enclosure MCB DB SPN 12-way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and directed.
164S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and directed. Please Enable Macros to View BoQ information
165S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58462021
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 46.01 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repairs To Civilian Married Accn At Afs Yelahanka.
Basic Detail
Tender No 8569/E8
Bidding Type Tender
Location
City Bengaluru Urban
State Karnataka
Key Dates
Publish Date 07 Nov 2026
Submission Date 28 Nov 2026
Open Date 05 Dec 2026
Finance
Tender Value 46.01 Lakhs
Tender Fee 500
EMD 92038
Exemption Available
Document List
3febf964-0cc9-4f83-bcef-9a03742c7657.html
Binder1.pdf
BOQ_895025.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

3febf964-0cc9-4f83-bcef-9a03742c7657.html

pdf

Binder1.pdf

xls

BOQ_895025.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender