Tender For Special Repairs To Bldg No. P/84 At Afs Yelahanka.
Tender Value
43.69 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
87386
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No. P/84 At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. |
| 3 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, laid in 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified. |
| 4 | M&L Glazed coloured Ceramic tiles of size 450x300X7mm thick set and jointed in neat cement slurry incl matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished complete all as specified and directed |
| 5 | M & L Non-skid-coloured ceramic tiles 7 to 8 mm thick matt finish (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified. |
| 6 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed. |
| 7 | M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, cooking plot forms and including 20mm thick cement mortar (1:4) incl pointing in white cement ( tiles 20mm thick machine cut, bedded and ;jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone (i) using marble dust with admixture of pigment to match incl rounding and polishing to edges of granite slab complete all as specified and directed. |
| 8 | Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 9 | M&L 75 mm thick plain cement concrete 1:3:6 (20 mm graded stone aggregate) for plinth protection completes all as specified and directed. |
| 10 | M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘Thickness of slab 100mm below complete all as specified and directed. |
| 11 | Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description complete all as specified and directed. |
| 12 | Demolition of brick work or stone masonry built in CM incl all quoins complete all as specified and directed. |
| 13 | Demolition of cement concrete in ground floor and pavings RCC in any description and in any position complete all as specified and directed. |
| 14 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 15 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed. |
| 16 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed. |
| 17 | M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed. |
| 18 | M&L 5mm thick cement plaster in CM 1:3 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on Ceiling surface complete all as specified and directed. |
| 19 | M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble complete all as specified and directed. |
| 20 | M&L preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of 3mm thick putty with smooth finish incl priming complete all as specified and directed. |
| 21 | M&L Preparation of newly plastered surfaces and applying Two coats of cement base paint on walls incl priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed. |
| 22 | M&L for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper with smooth roller finish over 3mm thick wall care putty on wall incl priming, complete all as specified and directed. |
| 23 | M&L two coats of Oil Bound Distemper over layer of 3mm thick putty with smooth finish incl priming on new plastered ceiling surfaces incl preparation of surfaces complete all as specified and directed. |
| 24 | M&L Preparing New painted wooden surface and applying two coat of Synthetic enamel Paint over pink priming complete all as specified and directed. |
| 25 | M&L Preparing old painted steel surface and applying one coat of Synthetic enamel complete all as specified and directed. |
| 26 | M&L preparation of old decorated ceiling surface and applying two coats of Oil Bound Distemper over layer of 3mm thick putty with smooth finish complete all as specified and directed |
| 27 | M&L Preparing New painted steel surface and applying two coats of Synthetic enamel paint over red oxide complete all as specified and directed. |
| 28 | M & L Complete removal of existing treatment Old plastered surfaces and applying Two coats of cement base paint on walls incl priming complete all as specified and directed. |
| 29 | Taking up or down 15mm steel tubing and connections complete all as specified and directed |
| 30 | All as per item No 29 here-in-before but 20mm bore complete all as specified and directed. |
| 31 | S&F 20 mm dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. |
| 32 | Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 33 | S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors complete all as specified and directed. |
| 34 | S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and directed. |
| 35 | S&F in repair gun metal globe gate valve 25 mm bore complete all as specified and directed. |
| 36 | S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair complete all as specified and as directed. Make: S1053121 make of \\"Cera\\" or its Equivalent approved by GE . |
| 37 | S&F in repairs vitreous China wash basin, white or coloured of size 550 x 400 mm including brackets complete all as specified and directed. |
| 38 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 39 | S&F plastic pedestal pattern seat cover white with flat bottom and cover and MS chromium plated hanging type device complete all as specified and directed. |
| 40 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 41 | S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed. Make FON-CHR40037 of make\\"JAQUAR\\" or its Equivalent approved by GE . |
| 42 | S&F in repair Brass CP wall Mixer 2 in 1 for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed.Make: FLR- CHR-5273UPR of make \\"JAQUAR\\" or its Equivalent approved by GE. |
| 43 | S&F in repair Brass CP centre hole Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed Make: FLR-5169NB of make \\"JAQUAR\\" or its Equivalent approved by GE . |
| 44 | S&F in repairs 15 mm dia two-way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed. Make:CON-CHR-083 FTK of make \\"JAQUAR\\" or its Equivalent approved by GE . |
| 45 | S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-sure, with crutch, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed. Make: ARI-CHR-39053 of make \\"JAQUAR\\" or its Equivalent approved by GE. |
| 46 | S&F in repair sinks made of stainless-steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including sink coupling complete all as specified and directed. |
| 47 | S&F in repair sink cock fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as specified and directed. Make: FLR-CHR-5347N of make \\"JAQUAR\\" or its Equivalent approved by GE . |
| 48 | S&F PVC Cabinet mirror of size 600 x 450 x125 mm complete all as specified and directed. |
| 49 | S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed. Make: OHS-CHR-1719 of make \\"JAQUAR\\" or its Equivalent approved by GE . |
| 50 | S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange complete all as specified and directed. Make: SHA-CHR- 483 FTK of make \\"JAQUAR\\" or its Equivalent approved by GE . |
| 51 | S & F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and directed. |
| 52 | S & F of 32/40mm waste pipe for wash hand basin and sink complete all as specified and directed |
| 53 | S&F in repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs complete all as specified and directed. Make: AKP-CHR- 35711PS of make \\"JAQUAR\\" or its Equivalent approved by GE . |
| 54 | S&F corner glass shelf 150mm X 150mm with Assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed. |
| 55 | S&F CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed. |
| 56 | S&F Stainless steel Soap dish fix to wall complete all as directed and specified. |
| 57 | S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera complete all as specified and directed. |
| 58 | S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed. |
| 59 | S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified and directed. |
| 60 | S&F PVC floor trap 75mm dia, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 61 | S&F 110 mm dia PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls incl Taking Down old pipes complete all as specified and directed. |
| 62 | S & F PVC (SWR) bends 110 mm dia in any radius with access door etc complete all as specified and directed. |
| 63 | PVC (SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors and walls incl Taking Down old pipes complete all as specified and directed. |
| 64 | S & F PVC (SWR) bends 75 mm dia in any radius with access door etc. complete all as specified and directed. |
| 65 | S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc. complete all as specified and directed. |
| 66 | S&F CP grating size 100mm fixed with white cement complete all as specified and directed. |
| 67 | S&F rotational moulded polyethylene water storage tank three-layer 1000 ltr capacity including threaded type cover hoisted and fixed in position all as specified in SSR Pt - I including dismantling and taking down old unserviceable tank complete all as specified and directed. |
| 68 | S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe or brass in repair complete all as specified and directed. |
| 69 | S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 25mm- 65gms) complete all as specified and directed. . |
| 70 | S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 20mm- 45gms) complete all as specified complete all as specified and directed. |
| 71 | Taking down door Chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 72 | All as per item No 71 above but exceeding 1.50 sqm but not exceeding 4.00 sqm complete all as specified and directed. |
| 73 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia complete all as specified and directed . (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 74 | Ditto above item no 73 but double extruded WPC of Frame size 50 x 125 mm complete all as specified and directed |
| 75 | Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. |
| 76 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet complete all as specified and directed. |
| 77 | M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete all as specified and directed. |
| 78 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) up to 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 79 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area up to 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified & directed(Glass shall be paid separately). Note: For uPVC frame, sash and mullion extrudedprofiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 80 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 81 | S&F second class hard wood glazed and skeleton shutter for doors open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or metered and rebated sash bars any number, edges or framing, plain chamfered or rounded fitted with beads for securing glass gauge size of members of shutters as specified in SSR part I of 35 mm thick complete all as specified and directed. |
| 82 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 83 | S&F Brass, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 84 | S&F for brass, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified and directed. |
| 85 | S&F for extruded brass handle 150mm fabricated type polished complete all as specified and directed. |
| 86 | Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. |
| 87 | S&F black tinted sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator complete all as specified and directed. |
| 88 | All as item 87 above but figured glass pin head type complete all as specified and directed. |
| 89 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 90 | S & F MS framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe. 290.Gde-E-165 complete all as specified and directed. |
| 91 | S& F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete. (Note: Bracket will be measured and paid separately) complete all as specified and directed. |
| 92 | S& F aluminium powder coated fancy type suitable brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necessary drilling & finished with polishing Each opening shall have two fillets at both ends complete all as specified and directed. |
| 93 | M & L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and the prelaminated side with different design and other side plain white of density not less than 600kg/cum the 18mm board should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity including all fittings like handle , auto closing hinges , magnetic catcher, channel and rod complete all as specified and directed |
| 94 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10 cm complete all as specified and directed. |
| 95 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15 cm complete all as specified and directed. |
| 96 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20cm complete all as specified and directed. |
| 97 | S&F polished Sadarahalli stone slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staircase incl rounding, nosing, polishing and groove cutting to edges of granite slab complete all as specified and directed. |
| 98 | S&F 20 to 22mm thick polished sadarahalli stone tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 including rounding, nosing, polishing and groove cutting to edges of granite slab complete all as specified and directed. |
| 99 | M & L for reinforced cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregates) as in slab, shelves complete all as specified and directed. |
| 100 | M&L TMT bars 6 to 8mm dia and over cut to length bent to shape required including cracking spirally for hooking ends and binding with and including MS wire annealed n. less than 0.9mm dia complete all as specified and directed. |
| 101 | Material and labour for providing hardcore of Broken stone or boulder of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 102 | M & L for 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 103 | M & L for 25 mm thick sand filling in bedding layer for laying floor finished complete all as specified and directed. |
| 104 | M & L for Machine pressed precast rubbed moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade jointed with grey cement and pigments complete all as specified and directed. |
| 105 | Demolition and breaking up drain pipes internal dia of pipe in 150mm (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed. |
| 106 | M&L for 150mm dia reinforced concrete pipes class NP-2 for following dia of pipe laid and jointed complete with collars complete all as specified and directed. |
| 107 | M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) for 150 mm dia pipe concrete bed to drain pipes of including packing under and haunching against the sides of pipe after they are laid and tested including necessary form work for the following bore of drain complete all as specified and directed. |
| 108 | M & L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed. |
| 109 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 110 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soft / loose soil complete all as specified and directed. |
| 111 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 112 | M & L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab along with screed bed, including cleaning the surface etc complete all as specified & directed. |
| 113 | M & L for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed.Note: - supply only of water proofing compound will be measured and paid separately under relevant item |
| 114 | Supply only approved integral water proofing compound, complete all as specified and directed. |
| 115 | M & L for laying/fixing TPO membrane of non-flammable water proofing of roof which shall be a 1.50 mm thick loose laid membrane using FOSROC Proofex ORG membrane or its equivalent in STP/CIPY/SIKA/PIDILITE DR FIXIT, in layers overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the roll either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non-woven geotextile fibre. The separation layer provided to prevent the mechanical abrasion and cushioning between the fosroc proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring. Note: Work shall be executed by authorized applicator with prior experience of more than 5 years on applying similar system complete all as specified and directed. |
| 116 | S&F for pully operated clothes drying system pully it 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer dia 22mm and inner dia 19.80 mm and pully made up of darling with rope guide mounted on channel pair of length 24\\"(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self-tapping screws provided with kit rope will be polyester braided undyed of 3.5+0.50 mm dia complete all as specified and directed. |
| 117 | Taking down existing unserviceable point wiring of any type/ size of light/fan/socket/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as specified & directed. |
| 118 | Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, fall ceiling light fittings etc. from any height of building complete all as specified & directed. |
| 119 | Taking down existing unserviceable Distribution boards any capacity complete all as specified & directed. |
| 120 | Taking down existing unserviceable MCB's/MCCB's any capacity completes all as specified & directed. |
| 121 | Taking down existing unserviceable submain wiring complete all as specified and as directed. |
| 122 | Taking down earthing material complete plate and pipe etc from 2.25 mtrs depth complete all as specified and directed. |
| 123 | M&L for Point wiring one light/bell point controlled by one, one way switch complete with 1.5 Sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non-metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc complete all as specified and directed. |
| 124 | All as per item No 123 herein before but one ceiling/exhaust fan point controlled by one, one way switch. |
| 125 | All as per item No 123 herein before but one 05 Amps socket outlet point on same board. |
| 126 | All as per item No 123 herein before but one switch socket outlet points 5 Amps on independent board. |
| 127 | All as per item No. 123 here-in-before but with copper conductor cable FRLS, 4.0 Sqmm for one 3 pin socket outlet, 15 Amps and including 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. |
| 128 | All as per Sl item No. 123 here in before, but for One Bell point controlled by one, one-way modular switch 5 amps, SP |
| 129 | All as per Sl item No. 123 here in before, but for One light point controlled by two 2 - w ay modular switch 5 amps, SP |
| 130 | S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and directed. |
| 131 | S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and directed. |
| 132 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 133 | S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and directed. |
| 134 | S & F Modular Bell Push 6A, 1 Module with bell symbol complete all as specified and directed |
| 135 | S & F Modular switch 2 way 6 Amps, 1 Module complete all as specified and directed |
| 136 | S & F Modular ceiling fan regulator stepped socket size, 2 module suitable to work on 230 volts complete all as specified, complete all as specified and directed |
| 137 | S&F calling bell ding doing working on 230 volts AC with different ring tones optional complete all as specified and directed. |
| 138 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed. |
| 139 | S&F 3 in 1 LED 4 ft batten 20 Watt (warm white, Neutral white, cool white), aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated life 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed . |
| 140 | S&F inverter LED 4 ft batten 20 Watt, 6500K with square profile and polycarbonate channel, lithium-ION battery with charging time 8 Hours -10 Hours and backup time up to 4-hour r and connector block complete all as specified and directed. |
| 141 | S&F LED light fitting mirror type with high output diffuser 2 feet, 10-watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 142 | S&F LED light fitting 10Watts bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 outdoor type metal body of suitable size complete all as specified and directed. |
| 143 | S&F surface type downlight circular/square 12 W, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 144 | S&F LED security light fitting 45-Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant, efficacy not less than 120 lm/Watts, rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 145 | M&L for wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect complete as specified and directed |
| 146 | S & F MCB SP 6 to 32 Amps 240 volts C type with rupturing capacity 10 KA all as specified and directed |
| 147 | S & F MCB SPN 40 to 63 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and directed |
| 148 | S & F MCB TPN,63 Amps, rupturing capacity 10 KA 415 volts suitable for fixing in existing DB of any capacity complete all as specified and directed. |
| 149 | S & F in repair sheet metal enclosure MCB DB SPN 2-way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and directed. |
| 150 | S & F sheet metal enclosure MCB DB SPN 12-way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and directed. |
| 151 | S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) all as specified and directed. Please Enable Macros to View BoQ information |
| 152 | S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender