Defence Statutory Bodies & Commissions/Committees Closing in 7 days TDR #58461970

Tender For Special Repair To Bldg No. P-541H (Mt Garrage) Of 11 Engr Regt Bairagarh Under Ge Bhopal

Issued by Statutory Bodies & Commissions/Committees · Bhopal, Madhya Pradesh
Tender Value
18.50 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
7 days left
EMD
37000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No. P-541H (Mt Garrage) Of 11 Engr Regt Bairagarh Under Ge Bhopal

BOQ

Name of Work:- SPL REPAIR TO BLDG NO. P-541H (MT GARRAGE) OF 11 ENGR REGT BAIRAGARH UNDER GE BHOPAL
Sl. No. Item Description
1Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline
2Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed by Engr in Charge
3M&L Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet (AZ-150) of 0.50 mm thick of an colour having tensil strength of 550/MPA as in roof covering/cladding to wall/ ridge,fixed with self tapping screw/L type or J type cranked hook bolts all as specified and directed by Engr in Charge.
4M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet (AZ-150) of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws all as specified and directed by Engr in Charge.
5Dismentling structural steel work including purlins, tursses, etc. complete all as specified and directed by Engr in Charge.
6Fixing only mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410W, Gde E-250 Quality 'A' complete all as specified and directed.
7S&F mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410W, Gde E-250 Quality 'A' all as specified and directed.
8S&F Mild steel work in Hand rails, half round or other steel section or core for woodenhand-rail straight portion, Guard bar drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concreteand screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shapeas directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessarydrilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed.
9M&L for preparation new steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed.
10M&L for preparation old steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
11Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description complete all as specified and directed.
12M&L for 10mm thick rendereing brick or concrete surface in CM 1:6 finishing the surface fair & even without using extra cement complete all as specified and directed.
13Demolition of brickwork or stone/boulder masonry , built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stonework and precast articeles complete all as specified and directed.
14M&L for fly ash brick work with flyash work straight or curved on plan exc 6 m mean radius, built in cm 1:6 all as specified and directed.
15M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as spd and as directed.
16M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper Complete all as spd and as directed.
17Demolition of cement concrete in floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes all as specified and directed
18M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base concrete incl demolition of concrete and paving n.exc 15cm thick (below or above GL) complete all as specified and directed.
19M&L for 100 mm thick PCC 1:2:4 type B1 using 20 mm stone aggregate as in hardstadning and finishing the surface even and smooth with out using extra cement complete all as specified and directed.
20M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed.
21Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A’ complete all as specified and directed.
22M&L for 75 mm thick PCC 1:3:6 type C-1 , using 20 mm graded stone aggregate in plinth protection, aprons, hard standing, path and like including bitmuminous mastic filling in 1:3 joints(in every 3.00mtr) and finishing the surfaces even and smooth without using extra cement complete all as specified and directed
23Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.
24M&L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor -stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with sheel metal ms flesh box, white cover plate with frame for fixing modular switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-
25All as per ser item No 23.00 here-in-before but one 3 pin socket outlet 5 Amps on same board all as specified and directed.
26All as per ser item No 23.00 here-in-before but 3 pin socket outlet 5 amps on independent board elect wiring 1.5 sq mm complete all as specified and directed.
27S&F Modular Switch, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed.
28S&F in repairs Ceiling rose surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and as directed.
29S&F modular Socket outlet, 2 module, multipurpose having provision for 2 & 3 pin, 6 Amp flush type, 240 volt AC complete all as specified and as directed.
30Supply and fixing energy saving LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing toughened glass thermal shock and impact resistance and heat resistant complete with powered by integrad electronice driver with out put short circuit protection, surge protection, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete toughened glass, lens IP 66, IK-08 and with system efficacy of 125 lm/W CRI >70 , PF≥0.95 complete all as specified and as directed.
31S&F LED 20/40 Watt tube light fitting (T8 type) IP-43, including LED retrofit tube 40 W one side connection type, 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative patti suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed.
32S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 04 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 56, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge.
33S & F in repairs MCB SPN suitable for 240 volts, AC supply 32 Amps, C Curve, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
34S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.
35M&L for earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 , water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.
36Deduct Schedule of credit (calculation will be done off line) Rs. 17571.80 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58461970
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 18.50 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No. P-541H (Mt Garrage) Of 11 Engr Regt Bairagarh Under Ge Bhopal
Basic Detail
Tender No 8665/E8
Bidding Type Tender
Location
City Bhopal
State Madhya Pradesh
Key Dates
Publish Date 07 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 18.50 Lakhs
Tender Fee 500
EMD 37000
Exemption Available
Document List
01c36111-bca7-46c5-9efa-838b6739fc4b.html
BOQ_894966.xls
CREDIT8665.pdf
Tendernotice_1.pdf
TENDER_DOCU_8665.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

01c36111-bca7-46c5-9efa-838b6739fc4b.html

xls

BOQ_894966.xls

pdf

CREDIT8665.pdf

pdf

Tendernotice_1.pdf

pdf

TENDER_DOCU_8665.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender