Defence Statutory Bodies & Commissions/Committees Closing in 9 days TDR #58461935

Tender For Special Repair To Bldg No E-112 (Mi Room) At Mh Golconda Under Ge Golconda

Issued by Statutory Bodies & Commissions/Committees · Hyderabad, Telangana
Tender Value
36.88 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
9 days left
EMD
74000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No E-112 (Mi Room) At Mh Golconda Under Ge Golconda

BOQ

Name of Work:- SPL REPAIR TO BLDG NO E-112 (MI ROOM) AT MH GOLCONDA UNDER GE GOLCONDA
Sl. No. Item Description
1BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8184/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: SPL REPAIR TO BLDG NO E-112 (MI ROOM) AT MH GOLCONDA UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES
2Dismantling single layer mangalore pattern or similar tiles laid dry in roofing complete all as specified and directed
3Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
4Dismantling timber scantling 40 Sqcm and over in section, in any position complete all as specified and directed
5M & L for 2nd class hard wood, clean sawn, in scantling timber fixed with nails complete all as specified and as directed
6Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and as directed
7S&F Rolled mild structural steel roof trusses (framed), trussed, purlins, posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E) complete all as specified and as directed
8S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed
9S&F MS work as in post and struts including cutting tops to shape as directed , drilling holes, notching for wire etc., flat iron fillets, nuts & bolts etc for securing wire mesh including all necessary drilling, bolting or riveting etc., similar works con forming to Fe-410 or Fe-310 grade, complete all as specified and directed.
10S&F Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed
11M&L for applying two coats of synthetic enamel paint over a coat of red oxide new or untreated steel surfaces exc 10 cm in width or girth including preparation complete all as specified and directed.
12M&L for preparation of old surfaces of wood or wood based material in trusses, rafters etc and applying Filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish
13S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (Mangalore pattern) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc and making good existing disturbed walls/surfaces with CM 1:4 or PCC 1:2:4 complete all as specified and as directed
14S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
15S&F in repair 0.80 mm thick Plain, galvanized, mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
16Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets and grids and S&F for true horizontal level 600x600mm panels false ceiling system using hot dipped galvanized steel sections exposed surface with pre-coated capping, Main Tee of size 24x32mm at every 1200mm c/c maximum, rotary stitched cross Tee of size 24x 27mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimetre wall. The complete grid is to be suspended at every 1200mm c/c in both directions by using 2mm dia pre straightened GI wire at every 1200mm interval at the main Tee using fine finished angular edge including 8-9 mm thick Gypsum boards of size 600x600 mm with rear side Aluminium fril and front side PVC lamination complete all as specified and as directed.
17S&F in repair Anodized aluminium snap grid frame work by using pre-straightened GI wire including taking down and refixing old false ceiling panels complete all as specified and directed
18Taking down and refixing old false ceiling panels from snap grid frame work complete all as specified and directed
19M & L for Cutting out V - grooves in plaster / masonry and inserting the waterproofing compound and making good in CM 1:3 with self curing admixtures complete all as specified and directed.
20Taking up or down for bore of pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as specified and directed.
21M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and as directed
22S&F in repair of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
23Taking up or down for bore of pipes in 20 mm, steel tubing and connections, including cleaning for refixing or removal to store etc complete all as specified and as directed
24S&F in repair of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
25Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete (reinforced), etc complete all as specified and as directed
26M&L for Reinforced cement concrete Type B1, 1:2:4 (20 mm graded stone aggregate) in chajjas complete all as specified and directed
27M&L for Reinforced cement concrete Type B1, 1:2:4 (20 mm graded stone aggregate) in Beams, cantilevers, bressummers and lintels complete all as specified and directed
28M&L for Formwork to soffits of suspended slabs of thickness not exceeding 200mm such as roof slabs, floor slabs, landings and similar work as flat finishing to fair finished surface of concrete complete all as specified and directed.
29M&L for formwork to small surfaces such as cantilever ends, brackets, ends of steps, caps and bases of pilasters and the columns and the like finishing to fair finished surface of concrete complete all as specified and directed.
30M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed
31Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground floor) complete all as directed.
32M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection including expansion or contractions joints at specified intervals, finished even and smooth w/o using extra cement complete all as specified and directed.
33Dismantling floor, hearth or wall tiling including cement mortar bedding, backing and rubbish off the premises complete all as specified and directed
34M&L for Vitrified double charged light shade ceramic tiles 10 mm thick (square/ rectangular ) polished, area of each tile not exceeding 0.36 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, laid over and including 15mm thick screed bed or bedding in cement mortar (1:3),complete all as specified and directed.
35M&L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm, but n exc. 0.11 sqm, in floor etc. set and jointed in net cement slurry & pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed
36M&L for glazed ceramic coloured tiles in vertical surface 450 x 300 x 7mm thick set and jointed in cement slurry and pointed with white or coloured cement to match including rendering 10mm thick backing coat in CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed
37Dismantling of stone slab and tiles of any description or thickness in floors, aprons laid , bedded and pointed any mortar complete all as specified and directed.
38M&L for Granite (of any type) work (table rubbed and polished) including edge moulding in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed
39M&L for chequered cement concrete, coloured tiles, textured finished of size 250 x 250 x 22 mm/300 x 300 x 22 mm thick set jointed in neat cement slurry and pointed with white cement and pigment in floors to match with colour of tiles, including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
40M&L for 20-25mm thick machine cut kota stone slab flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 20mm thick screed bed in CM 1:4 including grinding, rubbing and mirror polishing to achieve a high-gloss smooth surface finish complete all as specified and as directed.
41M&L for 20 mm thick, single piece machine cut polished Kota stone slab as in tread of steps and including bull nosing and 02 No. grooves cutting on each step over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc., complete all as specified and directed.
42M & L for 20-25 mm thick Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and as directed.
43M & L for Cutting openings through walls of old stone / brick masonry walls built in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and directed
44M&L for PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) in sub bases, floors and pavings etc. complete all as specified and directed.
45Demolition of brick work or stone / boulder masonry, built in cement mortar complete all as specified and directed
46M&L for Brickwork with fly ash bricks, old size one brick straight or curved on plan exc 6m mean radius, built in CM 1: 6 complete all as specified and directed.
47M & L for half Brick wall with old size fly ash bricks straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and directed.
48M&L for Walling of random rubble using Secunderabad stone, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.
49M&L for flush pointing with cement mortar 1:4 to random rubble masonry, uncoursed or brought up to courses complete all as specified.
50Drilling holes in granite or trap stone for bolts, pipes, etc. n. exc 25mm dia complete all as specified and directed.
51Drilling holes in granite or trap stone for bolts, pipes, etc. .exc 25mm but n. exc 60mm dia complete all as specified and directed.
52M&L for cleaning/removing all vegetation, bushes/small trees on vertical side of wall / chhaja / slab of building and making good the surfaces with PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) or rendering in CM (1:3) including removing spoils obtained to a distance not exc 50 metre and depositing complete all as specified and directed.
53Taking down cement or cement lime plaster on brick or stone walls/ceiling including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed
54M&L for Rendering, 10mm thick, in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down existing plastering of any description all as specified and as directed.
55M&L for Rendering, 15mm thick , in CM (1:4) mixed with water proofing compound as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement including taking down existing plastering of any description all as specified and as directed.Note: WPC shall be measured and paid separately.
56Supply only liquid water proofing compound of approved make complete all as specified and directed.
57M&L for preparation of new plastered surfaces of walls and applying 1.5mm thick white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of plastic/acrylic emulsion on wall surfaces conforming to the following brands : (i) Asian Paints - Apcolite Premium Emulsion (ii) Berger Paints - Easy Clean Emulsion (iii) Nerolac Paints - Beauty Gold/Beauty Smooth Emulsion, over a coat of wall primer prepared surfaces of internal walls complete all as specified and directed.
58M&L for preparation of newly plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces complete all as specified.
59M & L for complete removal of existing treatment and applying 1.5mm thick white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of plastic/acrylic emulsion on wall surfaces conforming to the following brands : (i) Asian Paints - Apcolite Premium Emulsion (ii) Berger Paints - Easy Clean Emulsion (iii) Nerolac Paints - Beauty Gold/Beauty Smooth Emulsion, over a coat of wall primer prepared surfaces of internal walls complete all as specified and directed.
60M & L for complete removal of existing treatment (by high pressure water jet) and applying two coats of weather proof exterior grade paint over a coat of primer on prepared surfaces of walls complete all as specified as per manufacturer instructions and directed.
61M&L preparation of old surfaces of plaster or concrete work of any description not otherwise described over 10 cm. width or girth by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of synthetic enamel paint complete all as specified and directed.
62Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each and removing to or from store complete all as specified and directed
63Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each and removing to or from store complete all as specified and directed
64M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping including necessary form work weathering slightly rounded or chamfered angles and treating and making good the disturbed portion complete all as directed.
65Taking down old aluminium shutters, partitions etc and refixed the same after necessary repair, (prelaminated particle board / glass / lock / handle measured separately) complete all as specified.
66S & F for powder coated (minimum thickness of powder coating 50 micron) aluminum anodized door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, etc complete, as specified and directed.
67S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodized frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed.
68M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as per architectural drawings and the directions of Engineer-in-Charge.
69S&F Anodized aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge
70M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and as directed.
71S&F 35 mm thick IInd class hard wood glazed and skeleton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass or gauge etc. complete all as specified as directed by Engr-in- charge.
72S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
73S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVCfoil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
74S&F 4mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.
75S&F 4 mm thick figured glass, pin head type and glazing exc. 0.50 Sqm in each pane fixed in aluminium door / window / ventilator with aluminium beading complete all as specified and directed.
76S&F 5.5 mm thick glass fixed in aluminium door / window / ventilator with aluminium beading complete all as specified and directed.
77S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed
78M&L for 12mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified
79S&F 100 MM Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type B-21 complete all as specified and directed
80S & F SS tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as specified and directed complete all as specified and directed
81S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodized complete all as specified and as directed
82S & F for stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and as directed
83S&F in repairs Aluminium extruded section Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified
84S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty including taking down old spring and fixing necessary supporting parts and making good with pcc and white / black cement on top complete all as specified and directed
85S&F 25 mm dia curtain rod (curtain rails) stainless steel and including decorative knobs, 2 Nos. for each curtain rod complete all as specified and directed.
86S & F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified
87S & F 150 mm length of SS tower bolts of extruded section and fixed complete all as specified and directed
88S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed
89S&F in repair 18 mm thick veneered decorative plywood, grade-1 ( with BWR resin) with decorative face veneers on both faces fixed with brass screws and cups complete all as specified and directed.
90S&F 12mm thick toughened plain glass with frosted designer film as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.
91S & F for stainless steel handles, fabricated type, anodized, Size of handle in 100 mm, etc complete all as specified and directed.
92M&L 2nd class hardwood exc 13 & n exc 25 scum Plain fillets. square, rectangular or triangular in section, clean sawn, se cured with nails or brads complete all as specified and directed.
93M&L for preparation of new surfaces of wood or wood based material description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed
94S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring fixed in repairs
95S&F in repair 2000 liters Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
96S&F in repair 1000 liters Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
97S&F in repair 500 liters Rotational moulded polyethylene water storage tanks tripler layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
98S & F in repairs Vitreous table top wash basin, white, rectangular with curved corners of size 400x500mm including cutting and setting on granite including waste fitting but excluding the waste pipe etc complete all as specified and directed.
99S & F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white with cascade flush tank (closed pattern including all necessary accessories) complete in all respect all as specified.
100S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
101S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.
102S&F in repair Vitreous China soap dish approximate size 160x 160x90mm embedded in the wall Complete all as specified and directed.
103Supply and fixed in repair 15 mm bore Bib taps CP brass chromium plated with fancy type single lever, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
104S&F in repair 15 mm dia Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank complete all as specified and as directed
105S&F in repair 15 mm dia Stop valves, fancy type single lever, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank complete all as specified and as directed
106S&F CPVC ball valves, with CPVC lever, screwed both ends to pipes of 20mm bore fixed complete all as specified and as directed
107S & F in repair 20mm Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed
108S&F in repair PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends complete all as specified and directed
109S & F in repair 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end complete all as specified and directed
110M & L for Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors as waste pipe etc., Bore of pipes in 32mm, etc complete all as specified and as directed
111S&F in repair 15 mm dia Pillar taps CP brass fancy type single lever with 150mm extension body, chromium plated, screwed down high pressure, with lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
112S & F in repair 15mm bore fancy type single lever CP brass Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe, screwed for iron pipe complete all as specified and directed
113M & L for Providing, supplying, and fixing superior quality 6 mm thick distortion-free silvered glass mirror conforming to IS 3438 : 2023, of approved make, with bevelled and polished edges, backed with a protective moisture-resistant copper-free silvering coating and lead-free paint layer. The mirror shall be mounted on a 6 mm thick exterior grade waterproof marine plywood backing sheet (conforming to IS 710), framed/fixed flush to the wall using Chromium Plated (CP) brass screws, CP round-headed caps, and neoprene/rubber cushioning washers fixed into plastic rawl plugs embedded in the wall, or using approved high-strength structural neutral silicone sealant where specified. The work includes cutting to required shape and size, edge grinding, polishing, drilling required holes, scaffolding/staging, handling, cleaning, waste disposal, and all labor, tools, and plant complete all as specified and directed by Engineer in charge and manufacturer instructions
114S&F in repairs bath room cabinet with mirror PVC size 450x350mm complete all as specified and directed.
115Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
116S& F in repair wall hung large flat back ceramic urinal pot, made of vitreous china conforming to IS 2556 (Part 6) : 2001, including CP brass spreader, Stainless steel / CP brass waste coupling with domed waste strainer, wall-mounting bracket kit, bottle trap with extension pipe up to SWR pipe complete all as specified and directed.
117Demolition and breaking up drain pipes (SGSW/AC/PVC/RCC) set in cement mortar, Internal dia of pipe up to 110 mm, etc complete all as specified and directed.
118Excavation in trenches n.exc 1.50m wide and n.exc. 1.50 m depth and getting out in hard/dense soil complete all as specified and directed.
119Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm complete all as specified and as directed
120Removing excavated materials n exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point in soils complete all as specified and directed
121S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 110 mm, etc complete all as specified and directed.
122M & L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 mm dia SWG pipe complete all as specified and directed
123S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls. (At any height of building, till 4 floors also), bore of pipe in 110 mm, etc complete all as specified and directed.
124S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 75 mm, etc complete all as specified and directed.
125S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall bore of pipe in 75 mm, etc complete all as specified and directed.
126M&L 110 mm bore PVC( SWR ) bend with oval access doors, including taking down complete all as specified and directed.
127M&L 75 mm bore PVC( SWR ) bend with oval access doors, including taking down complete all as specified and directed.
128S & F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specified and directed.
129S&F PVC (SWR) bends (size of bore 110mm) complete all as specified and directed.
130M & L for PVC (SWR) floor trap, plain with SS grating including jointing with solvent cement, diameter of outlet in 75 mm, etc complete all as specified and directed.
131Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. complete all as specified and as directed
132M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multistranded copper conductor conforming to IS-694 1990 with ISI marked (for phase ,neutral and earth) drawn in and including non metallic rigid PVC conduit medium grade with ISI mark of minimum 20mm dia and all conduit accessories Concealed including cutting / chases in wall /ceiling /fixed to roof /truss/columns etc and including factory made branded make embossed galvanized steel pressed terminal boxes along with size modular cover plates with frames fixing modular switches, sockets, regulators etc. of suitable size modules and earth wire to be connected to common earth dolly complete all as specified and directed for the following : Note: Location of light points,6 Amp socket points and light fittings may be decided by Engr-in-charge as per site/user requirement:-for One light /Fan /Bell point controlled by one modular switch 6 Amps one way
133All as per item no 131 but One 3 pin Point 6 Amps switch socket outlet point controlled by one switch on the independent board
134All as per item no 131 but One 3 pin Point 6 Amps switch socket outlet point controlled by one switch on the same board
135All as per item no 131 but here-in-before but with 2.5 sqmm size single core multistranded copper conductor cable for 3 pin 16 Amps Modular switch socket combination outlet on independent board with 2.5 sqmm FRLS insulated and unsheathed copper conductor as earth and connected to earth dolly.
136S&F Modular switch 1 way 6 Amps,1 module complete all as specified and as directed
137S&F Modular Type shuttered socket outlet, 3 pin 6A 230 volts 2 modules with ISI mark complete all as specified and as directed
138Supply and fix modular switch 1 way 16A,1 module complete all as specified and as directed
139S&F Modular Type shuttered socket outlet, 3 pin 6A/16 Amps,230 volts 2 modules with ISI mark complete all as specified and as directed.
140Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks complete all as specified and as directed
141S&F Stepped type electronic modular fan regulator 2-module , 230 Volts AC complete all as specified and as directed
142Supply and fix 20W,decorative, wall mounted, ultra slim, LED lighting fixture size (1224x 43x58)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete with all fixing arrangement etc, complete all as specified and as directed. Cat No : LUMILINEPLUSNEOBS20WLED865SPCSSINDS of Havells / CCS-103-20-65-SL-DP-NWH of Crompton / BCLSB 20 W WH of Bajaj
143Supply and fix 10W,decorative, wall mounted, ultra slim, LED lighting fixture size (550x 23x37)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete with all fixing arrangement etc, complete all as specified and as directed. Cat No: LUMILINEPLUSNEOBS10WLED865SPCSSINDS of Havells / CCS-103-10-65-SL-DP-NWH of Crompton / BCLSB 10 W WH of Bajaj
144Supply and fix in repair 36 watt LED Light 2' x 2' LED luminaire with polymer diffuser complete with accessories suitable for armstrong/Grid ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make: Havells Cat No. VENUSMOVE2X2PLR36WLED840SWH,TCR-145-36-65-SL-NWH of Crompton,BZRSQL36LLEDGXWH of Bajaj.
145Supply and fixing LED Bldg Security Light fitting 25 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp and corrosion resistant including thermal management in multiple optics complete with IP 66 protection separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size complete all as specified and directed by engineer-in-charge. Makes : Cat Nos. ENDURASUNDOWNSL25WLED765PASYBOPC of HAVELLS/ TRP-415-25-57-SL-LM-NBK of Crompton / ENXT P 25L WH PO PC SD of Bajaj
146S&F street light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for street light fittings fixed with two pair of MS flat iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flat iron surface with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.
147Supply and fix in replacement Sub main wiring with 2 runs of 6.0 sqmm, single core, FRLS insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as required along with one run of 6 sqmm single core FRLS insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old sub main wiring and type of conduit complete all as specified and directed. Note : Two runs of 6sqmm and one run of earth wire and one run of PVC Conduit shall be measured and paid as one unit length.
148S&F Sheet metal enclosure (ISI marked) acrylic pre-wired distribution board for TPN 4 way , 415 V TPN Acrylic DB, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.
149S&F in replacement Sheet metal enclosure (ISI marked) Acrylic pre-wired distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as specified and as directed
150S & F MCB single pole 6 to 32 Amps 240 volts, C Curve, 10 kA rupturing capacity providing in DB complete all as specified and as directed
151S & F MCB single pole & neutral 6 to 32 Amps 240 volts, C Curve, 10 kA rupturing capacity providing in DB complete all as specified.
152Supply and fix in repair MCB Triple pole & neutral 40 to 100 Amps 415 volts, C series,10 kA rupturing capacity providing in DB complete all as specified.
153Taking down ceiling/exhaust fan dismantling and painting of ceiling/exhaust fan complete at site with synthetic enamel paint by spraying including (fittings with filler) one coat after cleaning all dust etc including connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire including replacement of fan capacitor 2.5/3.15 MFD, canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greasing in fan bearing & refix same complete all as specified and as directed
154M & L for rewinding of ceiling fan with 1200 mm sweep size of copper enameled wire including varnishing ,heating with proper insulation complete and testing all as specified and directed .
155S&F exhaust fan including making necessary opening for fixings sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM noiseless, copper winding of sweep 250 mm with self closing louvers and blades as per existing complete fittings all as specified and as directed. NOTE: Quoted rate deemed to be included for providing hole by opening in any type of walls in the building including necessary plastering, grouting of nuts & bolts and washers suitable size and necessary fixing arrangement for fixing louvers and including making good to disturbed surface area to its original position complete all as specified and as directed
156M & L for Earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts,nuts,check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion including dismantling of old earthing materials.
157Supply, fixing ,Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100 Volt grade on walls with fixing accessories of 16 Sqmm 4 Core complete all as specified and as directed
158Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation, laying of poles, cables in trenches and getting out in soft/loose soil complete all as directed and specified. Note :- The contractor shall take due care while executing the work to avoid damage to electrical cables, telephone cables, water supply pipelines, etc. In case of any damage or cutting, the contractor shall carry out immediate repairs at his own cost, which shall be deemed to be included in the quoted rates.
159Returning filling in including spreading, leveling, watering and well ramming, in layers not exceeding 25cm in soil obtained from excavation complete all as specified and as directed
160Removal of surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above starting point complete all as specified and as directed
161Supply and lay spread dry clean sand in trenches for cable cushioning complete all as specified and as directed (only punned thickness will be measured and paid )
162Supply and lay common burnt, clay building bricks sub class B of standard size for cable protection in trenches complete all as specified and as directed.
163M & L for cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable/pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2;4) etc, required to match with the existing surface complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58461935
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 36.88 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No E-112 (Mi Room) At Mh Golconda Under Ge Golconda
Basic Detail
Tender No 8184/E8
Bidding Type Tender
Location
City Hyderabad
State Telangana
Key Dates
Publish Date 07 Nov 2026
Submission Date 30 Nov 2026
Open Date 02 Dec 2026
Finance
Tender Value 36.88 Lakhs
Tender Fee 500
EMD 74000
Exemption Available
Document List
096df069-6026-47db-8191-979e2bc02d3b.html
8184NIT.pdf
8184Tender.pdf
BOQ_895046.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 9 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

096df069-6026-47db-8191-979e2bc02d3b.html

pdf

8184NIT.pdf

pdf

8184Tender.pdf

xls

BOQ_895046.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender