Bids Are invited for Repair And Overhauling Service - Rate Contract For Repair Renewal Of Wood Works Onboard In Vessels; Any Other Suitable Brand; No; Buyer Premises - Manufacturing Of Lifebuoy Stand. (Indicative Drg. Enclosed At Fig. 1)• Teak Wood I

Sharing tender

Bids Are invited for Repair And Overhauling Service - Rate Contract For Repair Renewal Of Wood Works Onboard In Vessels; Any Other Suitable Brand; No; Buyer Premises - Manufacturing Of Lifebuoy Stand. (Indicative Drg. Enclosed At Fig. 1)• Teak Wood Is To Be Used For Manufacturing Of Lifebuoy Stand As Per Sample/Drawing As Instructed By The Department.• Wood Is To Be Cut Into Requisite Sizes And Planning Is To Be Done.• Lifebuoy Stand Drum Is To Be Manufactured With Wood/3Mm Ply/Sunmica.• Acrylic Sheet Transparent 3Mm Thick Is Fitted On The Drum Using Wooden Ring. • Stand Is To Be Joined With Base By Wooden Brackets.• Wooden Plug Is To Be Fitted On Top Of The Stand For Ashoka Emblem.• After Complete Assembling The Stand Is To Be Polished.Ndv Supply: Unfinished Teak Wood Battens, 3Mm Ply, Mpl, ½, 1, 1 1/2, Acrylic Sheet Transparent 3Mm Thick Sheet, Brass Ringfirm Supply: Brass Screws, Fevicol, Sheenlac Polish , Manufacturing Of Plywood Items Such As Ceremonial Dias, Tv Cabinet, Ship Name Boards, Table, Locker, Shoe Rack, Cupboard, Nwt Door, Key Board, Notice Board, Photo Boards, State Boards, Etc• Plywood Items Such As Ceremonial Dias, Tv Cabinet, Ship Name Boards, Table, Locker, Shoe Rack, Cupboard, Nwt Door, Key Boards, Notice Boards, Photo Boards, State Boards Etc Are To Be Manufactured In Situ Or Workshop As Instructed By The Department.• Plywood Is To Be Cut Into Requisite Sizes And Sunmica Is Pasted On It And Assembled To Make Into A Complete Item.• Suitable Teak Wood/Hf Wood Beading Is To Be Manufactured And The Same Is Fitted On The Job. In Case Of Officers State Boards, In/Out Beading Slots Are To Be Manufactured And Fitted.• Fittings Such As Drawer Channels, Handles, Knobs, Glass, Acrylic Sheet Transparent 3Mm Thick, Locks Etc Will Be Supplied And Fitted By The Firm.Ndv Supply : 12Mm & 19Mm Ply, Hf/Teak Wood Battens, White & Teak Sunmica, Handles, Locks, Sliders, Glass, Acrylic Sheet Transparent 3Mm Thick, Piano Hinges, Metal Beadings, Bunting Cloth, Channels, Knobsfirm Supply : ½, 1, 1 1/2 Brass Screws, Fevicol, Dendrite & Sheenlac Polish , Repair Of Plywood Items Such As Ceremonial Dias, Tv Cabinet, Ship Name Boards, Table, Locker, Shoe Rack, Cupboard, Nwt Door, Key Board, Notice Board, Photo Board, Etc• Plywood Items Such As Ceremonial Dias, Tv Cabinet, Ship Name Boards, Table, Locker, Shoe Rack, Cupboard, Nwt Door, Key Boards, Notice Boards, Photo Boards Etc Are To Be Repaired In Situ Or Workshop As Instructed By The Department.• Plywood Is To Be Cut Into Requisite Sizes And Sunmica Is Pasted On It And Assembled To Make Into A Complete Item.• Suitable Teak Wood/Hf Wood Beading Is To Be Manufactured And The Same Is Fitted On The Job. In Case Of Officers State Boards• Fittings Such As Drawer Channels, Handles, Knobs, Glass, Acrylic Sheet Transparent 3Mm Thick, Locks Etc Will Be Supplied And Fitted By The Firm.Ndv Supply : 12Mm & 19Mm Ply, Hf/Teak Wood Battens, White & Teak Sunmica, Handles, Locks, Sliders, Glass, Acrylic Sheet Transparent 3Mm Thick, Piano Hinges, Metal Beadings, Bunting Cloth, Channels, Knobs.Firm Supply : ½, 1, 1 ½ Brass Screws, Fevicol, Dendrite & Sheenlac Polish , Renewal Of Sunmica & Beading On Plywood Surface Such As Ceremonial Dias, Tv Cabinet, Table, Locker, Shoe Rack, Cupboard, State Boards, Etc• Renewal Of Only Sunmica & Beading On Plywood Surface Such As Ceremonial Dias, Tv Cabinet, Table, Locker, Shoe Rack, Cupboard, State Boards, Etc Is To Be Repaired/Manufactured In Situ Or Workshop As Instructed By The Department.• Old Sunmica Is To Be Removed From The Plywood Surface And New Sunmica Is Pasted On The Surface Using Dendrite/Fevicol. Suitable Teak Wood/Hf Wood Beading Is To Be Manufactured And The Same Is Fitted On The Job. In Case Of Officers State Boards, In/Out Beading Slots Are To Be Manufactured And Fitted.• Fittings Such As Drawer Channels, Handles, Knobs, Glass, Acrylic Sheet Transparent 3Mm Thick, Locks Etc Will Be Supplied And Fitted By The Firm.Ndv Supply : White & Teak Colour Sunmica, Hf/Teak Wood Battens, Handles, Locks, Sliders, Glass, Acrylic Sheet Transparent 3Mm Thick, Piano Hinges, Metal Beadings, Bunting Cloth, Channels, Knobs.Firm Supply : ½, 1, 1 1/2 Brass Screws, Panel Pins, Sheenlac Polish , Manufacturing Of Jumping Ladder Steps (One Unit Consists Of One Step & 04 Wedges (Indicative Drg. Enclosed At Fig. 2)• Hf Wood/Teak Wood Is To Be Used For Manufacturing Of Jumping Ladder Steps And Wedges As Per Sample/Drawing As Instructed By The Department.• Step Is To Manufactured As Per Sample, Holes And Grooves Are To Be Made On It.• Wedges Are To Manufactured As Per Sample And Grooves Are To Be Made On It.Ndv Supply: Unfinished Hf/Teak Wood Battensfirm Supply : Nil , Manufacturing Of Wooden Grating & Larne Target• Hf Wood/Teak Wood/Ply Wood Is To Be Used For Manufacturing Of Gratings & Larne Target As Per Sample/Drawing As Instructed By The Department.• Wood Is To Be Cut Into Requisite Sizes, Planning Is To Be Done And Assembled To Make Into A Complete Item.Ndv Supply : Unfinished Hf/Teak Wood Battens, ½ & 1 Nailsfirm Supply : Fevicol , Degutting Of Table/Locker/Shoe Rack / Cup Board•Degutting Of Wooden Table/Locker/Shoe Rack / Cup Board Is To Be Done As Instructed By The Department.• Proper Care Is To Taken While Degutting So That The Items Do Not Get Damaged And Can Be Regutted Back Post Completion Of Degutting Assistance To Other Departments.• Degutted Items To Be Placed/Dumped At Specified Areas By Firms Own/Hired Transportation.Ndvsupply:Nilfirm Supply : Nil , Regutting Of Table/Locker/Shoe Rack / Cup Board• Regutting Of Wooden Table/Locker/Shoe Rack / Cup Board Is To Be Done As Instructed By The Department Post Completion Of Degutting Assistance To Other Departments.Ndv Supply: Metal Clamps.Firm Supply : 1, 1 ½ Screws , Hand Polishing Of Teak Wood/Hf Wood Surface With Surface Preparation• Wooden Surface Is To Be Made Smooth With Sand Paper (80/120 Grade).• Apply One Coat Of French Polish And Polished Surface Is To Be Dried.• The Polished Surface Is Papered With Zero Grade Paper.• Again 4 To 5 Coats Of French Polish Is Applied Is Give Smooth And Glossy Finish.Ndv Supply: French Polish, Wax Polishfirm Supply : Sand Papers (80/120 Grade) , Degutting Of Wooden Planks (Teak Wood/Hf Wood/Ply) (Cool/Cold Room & Other Miscellaneous Compartments)• Teak Wood/Hf Wood/Plywood Planks Are To Be Degutted Without Damaging Planks In Cool & Cold Rooms, Cabins Etc.• Teak Wood/Hf Wood/Plywood Planks Are To Be Regutted In Back. Post Completion Of Work.• Degutted Items To Be Placed/Dumped At Specified Areas By Firms Own/Hired Transportation.Ndvsupply: Nilfirm Supply : Nil , Manufacturing & Laying Wooden Planks With Tongue & Groove Joint (Teak Wood/Hf Wood) Including Wooden Supporting Framing (At 2 Spacing)• Teak Wood/Hf Wood Battens Are To Be Manufactured And Fitted On Bkhd/Dkhd As Supporting Frames For Wooden Planking.• Teak Wood/Hf Woods Are To Be Manufactured And Fitted On The Wooden Frames Using Tongue & Grove Joint In Cool & Cold Rooms, Cabins Etc.Ndv Supply : Unfinished Hf Wood & Teak Wood Planks & Battensfirm Supply : Nil , Manufacturing Of Models Of Ships/Submarines.(Size 2 Ft.)• Ship/Submarine Model Is To Be Made Using Teak Wood As Per Sample Or Drawing.• Skilled Craftsmen Should To Be Employed For This Job.• Minute Miniature Parts Are To Be Made And Assembled To Make A Complete Job Along With Application Of Nc Putty On Wooden Surface With Putty And Spray Polishing/Painting Of Teak Wood/Hf Wood Surface With Polishing Material.Ndv Supply: Unfinished Teak Wood Log.Firm Supply : Fevicol, Fevikwick, Chemistick, Nc Putty,Duco Primer, Sheenlac Polish, Duco Black Paint, Sand Papers(80/120 Grade), Melamine Coat,Perspex Cover. , Manufacturing Of Models Of Ships/Submarines. (Size 4 Ft.)• Ship/Submarine Model Is To Be Made Using Teak Wood As Per Sample Or Drawing.• Skilled Craftsmen Should To Be Employed For This Job.• Minute Miniature Parts Are To Be Made And Assembled To Make A Complete Job Along With Application Of Nc Putty On Wooden Surface With Putty And Spray Polishing/Painting Of Teak Wood/Hf Wood Surface With Polishing Material.Ndv Supply : Unfinished Teak Wood Log.Firm Supply : Fevicol, Fevikwick, Chemistick, Nc Putty,Duco Primer, Sheenlac Polish, Duco Black Paint, Sand Papers(80/120 Grade), Melamine Coat,Perspex Cover. , Manufacturing And Fitment Of Battery Pit Wedges (Size: 6/8/10Mm X 35Mm X 750Mm)• Teak Wood/Hf Wood Wedges Are To Be Manufactured And Fitted On Bkhd/Dkhd As Supporting Frames For Wooden Planking.• Old Wedges To Be Removed And New To Be Fitted.• Assistance To Be Provided While Loads Of Batterys.Ndv Supply: Unfinished Teak/Hf Woodfirm Supply : Nil , Manufacturing And Fitment Of Battery Pit Gratings (Size: 2025Mm X 350Mm X 50Mm)• Teak Wood/Hf Wood Gratings Are To Be Manufactured And Fitted In Battery Pit.• Old Gratings To Be Removed And New To Be Fitted.Ndv Supply : Unfinished Teak/Hf Wood, Screws, Rubber Piecesfirm Supply : Nil. , Manufacturing And Fitment Of Battery Pit Gratings (Size: 3025Mm X 350Mm X 50Mm)• Teak Wood/Hf Wood Gratings Are To Be Manufactured And Fitted In Battery Pit.• Old Gratings To Be Removed And New To Be Fitted.Ndv Supply : Unfinished Teak/Hf Wood, Screws, Rubber Pieces.Firm Supply : Nil. , Manufacturing And Fitment Of Bulkhead Beam Of Battery Pit (Size: 75Mm X 200Mm)• Teak Wood/Hf Wood Beams Are To Be Manufactured And Fitted In Battery Pit.• Old Beams To Be Removed And New To Be Fitted.Ndv Supply : Unfinished Teak/Hf Wood, Screws, Rubber Pieces.Firm Supply : Nil.