Tender For special Repair To Sewage Line And Open Drains, Path And Culverts At Offrs Md Accn Gaur Enclave And Provn Of View Cutter At Sm-27 Haji Peer Path Under Ge (Mis) Mhow
Tender Value
48.70 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
20 days left
EMD
97500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Sewage Line And Open Drains, Path And Culverts At Offrs Md Accn Gaur Enclave And Provn Of View Cutter At Sm-27 Haji Peer Path Under Ge (Mis) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.50m wide & n.exc 1.50m depth for foundaton etc for sewage line, shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.Note:- Excavation to be done by manual method only |
| 2 | All as per item No 1.00 abobe but exc. 1.50m and n.exc 3.00m |
| 3 | Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for foundaton etc for sewage line, shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any kind of soil complete all as specified and directed. |
| 4 | Rough excavation not exceeding 1.5 m deep and getting out in any kind of soil complete all as specified and as directed. |
| 5 | Demolition and breaking up drain pipes of upto 200mm bore (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar including haunching complete all as specified and directed. |
| 6 | M&L for salt glazed stoneware drain pipes 150mm dia bore laid in trenches and jointed as specified complete all as specified and directed. |
| 7 | M&L for salt glazed stoneware drain pipes 200mm dia bore laid in trenches and jointed as specified complete all as specified and directed. |
| 8 | M&L for 150mm bore/inner dia rat proof/anti rodent Double wall corrugated (DWC) pipe (SN-8) with intergral socket and clamps and all necessary fttings, laid in trenches jointed as per manufacturer instruction confirming to IS 16098 (Part 2) complete all as specified and directed |
| 9 | M&L for concrete bed to drain/sewage pipes 150,mm dia bore using plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes (SGSW or DWC) after they are laid and tested in complete all as specified and directed. |
| 10 | M&L for concrete bed to drain/sewage pipes 200,mm dia bore using plain cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes (SGSW or DWC) after they are laid and tested in complete all as specified and directed. |
| 11 | M&L for cutting/filling into existing manholes for connecting new sewage line upto 200 mm bore (internal dia of pipe) incl making good to disturbed benching and haunching, plaster etc and forming new branch channel ( ½ round of ¾ section) if required in cement concrete 1:2:4 type B1 and smooth finished , reforming benching as required and as directed for internal dia for the drain pipe. (Each Man hole shall be measured under this item ) |
| 12 | Demolition of brick work or stone masonry built in cement mortar including all quoins,coping, arches, jambs etc complete all as specified and directed |
| 13 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 using modular size bricks complete all as specified and directed. |
| 14 | M&L for half brick work with using sub class 'B' modular brick, straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:4 using modular size bricks complete all as specified and directed. |
| 15 | Taking down existing cement plaster in cement mortar on brick/stone masonry walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 16 | M&L for endering 15mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | Demolition of existing cement concrete (un reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 18 | M&L for Plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 19 | M&L for Plain cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in coping of manholes etc complete all as specified and directed. |
| 20 | M&L for Plain cement concrete (1:2:4) type B1 (using 40 mm graded stone aggregate) as in surface channel of manholes complete all as specified and directed. |
| 21 | Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds etc complete all as specified and directed. |
| 22 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 23 | M&L for Pre-cast Cement Concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs for manholes etc., set in cement mortor (1:4) including mouldings complete all as specified and directed.Note: Reinforcement will be measured and paid separately. |
| 24 | M&L for 600x600mm FRP cover slabs with frame and hinge of premium quality of colour white/ dark grey having load bearing capacity of 5 tons for manholes/ kitchen chambersetc., set in cement mortor (1:4) including mouldings complete all as per manufacturer instructions and all as specified and directed. |
| 25 | S&F Mild Steel TMT bars, 10mm dia & over , cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire complete all as specified and directed. |
| 26 | S&F Mild steel TMT bars, 6 to 8mm dia cut ot length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with wire complete all as specified and directed. |
| 27 | S&F factory made steel fibre reinforced (SFRC) man holes covers with concrete frames incl necessary hold fast/hooks (medium duty) of 560 mm opening dia or rectangular of equivalent area and the cove shall be made with FI outer frame and SFRC 50mm thick including fixing with CM 1:4 complete all as specified and directed. |
| 28 | All as per item No 27.00 above but without frame |
| 29 | S&F mild steel framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 including of dismantlinf of Timber structure if any complete all as specified and as directed. |
| 30 | Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm hard and dense soil complete all as specified and as directed. |
| 31 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed. |
| 32 | S&F in repairs for 100mm bore cast iron soil waste and vent pipes in any length with or without ear with cement joint laid in trenches or floors or fix to wall vertically complete all as specified and as directed. |
| 33 | S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all specified and directed. |
| 34 | S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber rings joints laid in trenches or in floors of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 35 | S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber rings joints laid in trenches or in floors of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 36 | S&F PVC (SWR) pipe bend 75 mm with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 37 | S&F PVC (SWR) pipe bend 110 mm with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 38 | S&F PVC (SWR) junction 75mm single (single `T') equal or unequal with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 39 | S&F PVC (SWR) junction 110 mm single (single `T') equal or unequal with accessable door of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed. |
| 40 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 41 | S&F in repairs PVC(SWR) floor trap 100mm outlet dia plain with grating including jointing with solvent cement inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed. |
| 42 | Cleaning/clearing of under ground sewage lines any depth by removing any type of blockage from sewage line upto and including 200mm bore/ dia by hydraulic jet pressure water pipe, of sewage cleaning system with compressure and sewage sludge pumps complete mounted on truck/vechicle , from manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning including intermediate manholes. Sludge/sludge water in form of semi solid/loose state will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burrying the same (semi solid/ liquid shall not be burried) including taking off manhole covers and refixing the same after cleaning complete all as directed by Engr-in-Charge. Note:-The operation shall be executed/carried out with any kind of sewage cleaning system machine mounted on truck/vehicle such as sewage cleaning Mechanical Pump / compressure/ water tank & Electricity etc complete as and cost of same shall be deemed to be included in the rate quoted by the contractor. |
| 43 | Cleaning of septic tanks and manholes completely by emptying the liquid /semi solid foul contents, any depth mechanically as specified completely, cleaning the inlets /outlets etc incl disposal of soil/sludge will be disposed off either by carrying the same in covered van or trolley at out side MOD land and burrying the same (semi solid/ liquid shall not be burried) including taking off covers and refixing the same after cleaning complete all as directed by Engr-in-Charge. Note:-The operation shall be executed/carried out with any kind of sewage cleaning system machine mounted on truck/vehicle such as sewage cleaning Mechanical Pump / compressure/ water tank & Electricity etc complete as and cost of same shall be deemed to be included in the rate quoted by the contractor. |
| 44 | M&L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed. |
| 45 | Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. |
| 46 | M&L for chequered cement concrete tiles with grey cement and pigment of size exc. 0.08 sqm but n.exc 0.16 sqm each tile and 25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 47 | M&L for 60mm thick machine pressed precast concrete interlocking paver block of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand and stone dust as in levelling course of interlocking complete all as specified and as directed. |
| 48 | M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finished) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand and stone dust as in levelling course of interlocking complete all as specified and as directed. |
| 49 | M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed. |
| 50 | M&L for RCC type B1 1:2:4 (using 20mm aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 51 | Formwork to flat rough finished surface of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed |
| 52 | Formwork to flat rough finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 53 | M&L for RCC (Nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 54 | M&L for Reinforced concrete pipes of dia 450mm, class NP3, laid and jointed in floors/ trenches complete with collars complete all as specified and as directed. |
| 55 | M&L for Reinforced concrete pipes of dia 600mm, class NP3, laid and jointed in floors/ trenches complete with collars complete all as specified and as directed. |
| 56 | M&L for stone walling of squared rubble,regular coursed,well bonded,bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed. |
| 57 | M&L for preparation of old decorated surfaces of wall and applying two coats of white wash on walls complete all as specified and directed. |
| 58 | S&F mild steel hollow or tubular Section work in tubular trusses, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming I. S.1161- 1979 grade St.-240 complete as specified and directed. |
| 59 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed. |
| 60 | M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 61 | Surface excvation in soft and loose soil nexc 30 cm deep and averaging 15 cm deepand getting out complete all as specified and directed. |
| 62 | M&L for Hardcaore of gauge n exc. 63mm depositeds spread and levelled in layers n exc.15 cm thick watered aand rammed to a true surface n complete all as specified and as directed. |
| 63 | M&L for 100 mm thick PCC 1:4:8 type C2 using 40 mm graded stone aggregate as in sub base complete as specified and directed. |
| 64 | Excavation post holes (or similar holes) each n exc. 0.5 Cum, getting out Hard/ dense soil, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layersn.exc. 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and directed. |
| 65 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed. |
| 66 | M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in foundation ,post, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender