Tender For repair maintenace To 12 Nos Of F Tyrpe Quarters At Power House Colony, Mundiguda, With Electrical Installation Of Ukhep, Bariniput
Tender Value
1.06 Crore
Estimated cost
Bid Submission
25 Nov 2026
16 days left
EMD
1.06 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenace To 12 Nos Of F Tyrpe Quarters At Power House Colony, Mundiguda, With Electrical Installation Of Ukhep, Bariniput
BOQ
| Sl. No. | Item Description |
| 1 | PART A: R/M to 12 nos of F tyrpe quarters at Power House Colony, Mundiguda, UKHEP, Bariniput(Civil Works). |
| 2 | Earth work in hard soil or gravelly soil within 50m intial lead & 1.50 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and including cost of all labour, T & P, sundries and labour cess etc complete. |
| 3 | Filling foundation & plinth with sand, well watered & rammed including cost, conveyance, royalty, T&P, sundries, lead, lift, delift and labour cess etc complete . |
| 4 | Dismantling and removing 2.5cm. thick artificial stone flooring including stacking the useful materials for reuse and removing the debries within 50mtr lead including all labour, T&P, sundries and labour cess etc complete in ground floor and first floor. |
| 5 | Removing old lime or cement plaster from walls including racking out joints 12mm. deep and removing the debries within 50mtr lead including all labour, T & P, sundries,lead, lift, delift and labour cess etc complete in ground floor & 1st floor. |
| 6 | Dismantling and removing doors & windows and ventilators including removal of frames,hinges, fastenings and stacking the same for reuse & removing the debries within 50m lead including all labour, T&P, sundries & labour cess etc complete in ground floor & 1st floor. |
| 7 | Dismantling brick or stone masonry in lime or cement mortar under 3mtr. height including stacking the useful materials for reuse and removing the debries within 50mtr lead including all labour,T & P, sundries,lead, lift, delift and labour cess etc complete in ground floor & 1st floor. |
| 8 | Dismantling and removing all RCC chajja, shelves, fins & parapet including stacking the useful materials for reuse and removing the debris with 50m initial lead including all cost of labour, T&P, sundries, & labour cess etc complete |
| 9 | Scraping old paint with scapers, sand papering & washing with soap water or soda including scaffolding upto any height including all cost of labour, T&P, sundries, scaffolding & labour cess etc complete. |
| 10 | Close deep chipping and cleaning to R.C.C. surface for receiving cement plaster or cement concrete including all labour, T&P, sundries and labour cess etc complete in ground floor & 1st floor. |
| 11 | Cement concrete (1:3:6) with 40mm size HGCB metal including cost, conveyance, royalty, lead, lift, delift, all labour, T&P, sundries, labour cess and curing etc complete. |
| 12 | Providing M.S grills approximately 35.28 Kg /sqm made out of M.S angle frame of cross section 40mm x 40mm x 5mm, 3 vertical members & 2 horizontal members, 4 nos of fixing clamps of 0.20 mtr long each of same angle section, 12 numbers of 12 sqmm MS bars of 1.50 mtr long each as horizontal bars and 14 numbers of 12 sqmm MS bars as vertical members @ 1.20 mtr long each , priming the MS grill with red oxide primer and painting two coats with any approved enamel paint & fixing the same in position with cement concrete (1:2:4) with 12 mm HGCB chips for 4 nos of clamp grooves etc complete including all cost of materials, labour, T & P, sundries, fabrication charges, fixing charges & labour cess etc complete. |
| 13 | Cement concrete (1:2:4) for R.C.C works with 12mm size HGCB chips including cost, conveyance , royalty, all labour, T&P , sundries, lead, lift, delift, labour cess and curing etc complete in ground floor & 1st floor. |
| 14 | Providing & fixing Wood plastic Composite section 4\\" x 2.50\\" x 210\\" work framed and fixed( wrought & putup) in trusses , purlins, frames of doors & windows, ventilators, beams and fixed the same in position with six numbers of 10 mm dia x 140 mm long screwed steel bolt with PVC plug of same length including drilling 10 mm dia hole in door /window chaukaths including all cost of all required materials , labour, T&P , sundries, labour cess and curing etc complete. |
| 15 | Providing, fitting and fixing in position 32 mm thick single leaved / Double leaved wudfrill pine door shutter including cost of door shutter, all hard ware fittings like one numbers of wooden hinged cleat, Two numbers of ISI chromium plated handles 125 mm x 175 mm x 32 mm, Two numbrer ISI chromium plated tower bolts 200mm x10 mm, four numbers of S.S Rigma butt hinges 125 mm x 75 mm x 2.6 mm, One numbers of doorset HLAMAAGMBN , one number of door stopper and all types of required screws etc complete including all labour, T & P, sundries, labour cess etc complete. |
| 16 | Three track three panels sliding window with two 5mm thick acrylic sheet and one wire mesh panels with Aluminum channel for roller track, wool pile, nylon rollers with SS304 body. Using R2 Series with frame (70mm & above)* (40mmc & above) & both glazed and fly screen sash (25mm & above)*(50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2mtr) |
| 17 | Rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including cost of all materials complete including all labour, T&P, sundries, lead, lift, delift and labour cess etc complete. |
| 18 | RCC foundation, plinth band and footing bases of cloumns , mass concrete and precast RCC slab etc |
| 19 | Cement concrete (1:2:4) for P.C.C works with 12mm size HGCB chips including cost, conveyance , royalty, all labour, T&P , sundries, lead, lift, delift, labour cess and curing etc complete in ground floor & 1st floor. |
| 20 | Supplying, fitting and placing uncoated HYSD bar TATA Tiscon Fe-500D/ SAIL ISI bar Reinforcement complete as per drawing and technical specification including cost, conveyance , all labour, T&P , sundries, labour cess etc complete in ground floor. |
| 21 | Brick work with fly ash brick 23cmx11cm x8cm size having crushing strength not less than 75kg/sqcm with dimensional tolerance ±2% in cement mortar (1:6) in foundation & plinth and superstructure including cost,conveyance, royalties, all labour,T & P, sundries, labour cess and curing etc complete in ground floor and first floor. |
| 22 | 16mm thick cement plaster in cement mortar (1:6) including admixure of Dr. Fixit pidi proof (LW+) over brick or stone masonary including cost, conveyance, royalty, lead, lift, delift, all labour, T&P, sundries, labour cess and curing etc complete in ground floor and 1st floor. |
| 23 | 12mm thick cement plaster (1:4) to R.C.C. roof and chajja etc including admixure of Dr. Fixit pidi proof (LW+) including cost, conveyance, royalty, all labour, T&P, sundries, labour cess and curing etc complete. |
| 24 | Providing and fixing 20mm thick granite tiles in floors, treads or steps and landing using approved shade , quality, and size of granite slab at all height on 25mm thick bed of cement mortar of mix (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of granite tile, conveyance, royalty, all labour ,T&P, sundries, laoding, unloading, stacking of materials at site ,curing and labour cess etc complete. |
| 25 | Providing and fixing vitrified tile flooring using double charged fully vitrified tiles of premium grade having thickness of 8cm to 10cm confirming to ISI-13756 Of 600mm*600mm coloured / printed series (homogeneous) of approved quality, Johnson /Kajaria/ Rak/ Somany or equivalent in all floors & dados of all heights on 20mm thick bed of cement mortar of mix(1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required qualities of pigment of approved mark to match the shades of vitrified tile if required watering and curing for 21 days including cost of all material , labour T&P, sundries, lead, lift delift & labour cess etc complete in ground floor & first floor. |
| 26 | Providing and fixing 30cm x 30cm / 40cm x 40cm special plain / printed series ceramic antiskid floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 in floors, treads or steps and landings on 25 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of tiles, all labour, T & P, sundries, all other materials, conveyance, royalty, lead, lift, delift, labour cess and curing etc complete in ground floor and 1st floor. |
| 27 | Providing and fixing 20cm x 30cm / 20cm x 20cm special plain / printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 in dados skirting and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost, conveyance, royalty, all labour, T & P, sundries, lead, lift, delift, labour cess and curing etc complete in ground floor and 1st floor. |
| 28 | Providing, fitting and fixing in position 25 mm thick single leaved WPC door shutter including cost of door shutter, all hard ware fittings like Two numbers of ISI chromium plated handles 125 mm x 175 mm x 32 mm, Two numbrer ISI chromium plated tower bolts 200mm x10 mm, three numbers of butt hinges 100 mm x 70 mm x 2.60 mm, Two numbers of chromium plated sliding door bolt (Aldrop). and all types of required screws etc complete including all labour, T & P, sundries, labour cess etc complete. |
| 29 | Providing and finishing wall surface with Birla white wall seal water proofing putty of Asian/ Berger/ Shalimar make and finished smooth and even surface to receive painting including cost of paint, scaffolding charges, labour , T & P, sundries, labour cess etc complete in ground floor & 1st floor. |
| 30 | Wall painting two coats with plastic emulsion paint of approved shade of Berger/ Asian/ Shalimar / Nerolac / Dulux or equivalent make on old work to give an even shade at all height including cost of paint, brush, putty,all labour, T&P, scaffolding, sundries, labour cess etc complete in ground floor and first floor. |
| 31 | Painting two coats to out side walls surface with exterior weather coat paint of approved shade of Asian/Berger/Shalimar / Nerolac / Dulux or any equivalent make on new work to give an even shade at all height including cost of weather coat paint, brush, putty, all labour, T&P, sundries, scaffolding and labour cess etc complete in ground floor and first floor. |
| 32 | Providing, fitting & fixing of 80 mm thick cement concrete paver block in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement :4 coarse sand) and filling the joints with sand including cost of all materials, conveyance, royalty, all labour, T & P, sundries, lead, lift, delift, labour cess and curing etc complete. |
| 33 | Priming one coat with red oxide primer including cost of primer, brush, all labour, T&P, sundries, labour cess etc complete in ground floor. |
| 34 | Painting two coats to doors & windows with any approved enamel paint of Asian/ Berger/ Shalimar/ Nerolac make including cost of paint, brush, all labour, T&P, sundries, labour cess etc complete in ground floor and first floor. |
| 35 | P.H. Works |
| 36 | Dismantling squatting type water closet and urinal plates and mending good the damages to the floor including all labour, T & P, sundries and labour cess etc complete in ground floor & first floor. |
| 37 | Providing & fixing 20\\" x 16\\" (500 x 400) mm porcelain wash hand basin with a pair of C.I bracket including cutting walls and making good the damages in C.C (1:2:4) as per specification all complete including cost of all materials ,labour, T & P, sundries, curing and labour cess etc complete in ground floor and 1st floor. |
| 38 | Porcelain 20\\" x 16\\" ( 500 x 400) mm Wash Hand Basin. |
| 39 | Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass / Belgium fixed to wooden plugs with chromium plated brass screws and washers complete including all cost of materials, labour, T&P sundries & labour cess etc complete. |
| 40 | Providing and fixing standard sized Chromium Plated towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws complete as per specifications, including all cost of materials, labour, T&P sundries & labour cess etc complete. |
| 41 | Providing and fixing wash down water closet ( European type W.C pan Hind ware make ) with integral 'S' or 'P' trap confirmimg to IS 2556 : Part 8 - 2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar ( 1:1) etc all complete including all cost of materials, labour, T&P, sundries & labour cess etc complete. |
| 42 | White vitreous china wash down water closet (EWC) |
| 43 | Providing and fixing plastic seat & cover Hind ware make for wash down water closet with chromium plated brass hinges and rubber buffers all complete including all cost of materials, labour, T&P, sundries & labour cess etc complete. |
| 44 | Providing & fixing PVC low level flushing cistern of Hind ware make with manually controlled device (handle & lever) with all fittings and fixtures including cost, conveyance all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 45 | Providing & fixing steel kitchen sink single bowl Mousumi size 24\\" x 18\\" x 10\\" including cutting holes in walls, granite tile and making good the damages etc all complete including cost of a good quality chromium plated sink faucet, angular stop cock and 15mm dia PVC connecting pipe, conveyance all labour, T&P, sundries, lead, lift, delift, labour cess etc complete as per specification. |
| 46 | Providing & fixing 32 mm dia PVC waste pipe for wash basin or sink with brass check nut including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 47 | Providing & fixing 15 mm dia pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 48 | Providing & fixing 15 mm dia PVC inlet connection pipe and making connection with pillar cocks/ sink faucets and supply mains for wash hand basin/ kitchen sink etc complete including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 49 | Providing & fixing 100 mm dia chromium plated shower with 15 mm or 20 mm inlet including cost of shower arm 15 mm x 225 mm with flange round , conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 50 | Providing and fixing standard sized glass shelf with chromium plated brass bracket and guard rail complete fixed to wooden plugs with chromium plated brass screws including cost of material , labour T&P, sundries, & labour cess etc complete |
| 51 | Providing & fixing 100 mm dia C.P grating in floor including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete. |
| 52 | Providing & fixing 15 mm dia C. P long body bib cock including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 53 | Providing & fixing 15 mm dia C. P long body two way bib cock including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 54 | Providing & fixing pvc health faucet with 1.00 mtr tube with hook including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 55 | Providing & fixing 15 mm dia C. P angular stop cock including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 56 | Providing & fixing C. P soap holder / disc including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 57 | Providing & fixing good quality tooth brush holder including cost, conveyance, all labour, T&P, sundries, labour cess etc complete. |
| 58 | Dismantling G.I pipes including stacking of pipes within 50 mtr lead including all labour, T&P, sundries, labour cess etc complete. |
| 59 | Providing & fixing to wall or ceiling and floor UPVC pipes class confirming to ASTM-D- 1585/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the walls, ceiling and floor all complete includes jointing of pipes & fittings with UPVC solvent cement and testing of joints complete including cost, conveyance, all labour, T&P, sundries, lead, lift, delift, labour cess etc complete as per specification. |
| 60 | 20 mm dia UPVC pipes. |
| 61 | 25 mm dia UPVC pipes. |
| 62 | Providing and fixing of 25 mm dia UPVC ball valve Schedule - 80 Ashirbad or equivalent with two nos of unions including cost of all materials, all labour, T & P, sundries and labour cess, testing etc complete in ground floor and 1st floor. |
| 63 | Details of cost for one no of 25 mm UPVC ball valve. |
| 64 | Details of cost for one no of 20 mm dia UPVC ball valve. |
| 65 | Providing and fixing on wall face 110 mm dia unplasticised rigid UPVC pipe (4 Kg / sqcm) ventilation and rain water pipes of Finolex / Ashirbad / Oriplast confirming to IS : 14735 type 'A' including jointing with solvent cement single socketed pipes for ventilation & rain water system including all cost of labour, T & P, sundries, PVC clamp, nail, scaffolding and labour cess etc complete. |
| 66 | Cutting holes through the brick or laterite masonry wall for taking 80 mm /110 mm dia P.V.C ventilation & rain water pipes & mending good the damages including cost, conveyance , royalty, all labour, T&P, sundries, lead, lift, delift, labour cess, scaffolding and curing etc complete in ground floor and 1st floor. |
| 67 | Providing and fixing on wall face 75 mm dia unplasticised rigid UPVC pipe (4 Kg / sqcm) Soil and waste water pipes of Finolex / Ashirbad / Oriplast confirming to IS : 14735 type 'B' including jointing with solvent fit, single socketed pipes for drainage of waste water from kitchen & bath rooms including all cost of labour, T & P, sundries, PVC clamp, nail, scaffolding and labour cess etc complete. |
| 68 | Supplying all materials, jointing of materials including all labour, T & P, sundries,labour cess and fixing of UPVC SWR pipes including all fittings etc complete. |
| 69 | 110 mm x 87. 5° plain bend. |
| 70 | 110 mm x 87. 5° door bend. |
| 71 | 110 mm single Tee with door. |
| 72 | 110 mm dia WC Bend with lip ring . |
| 73 | 110 mm dia UPVC vent cowl. |
| 74 | 75 mm x 87.5° Door bend. |
| 75 | 110 mm PVC Clamp. |
| 76 | 75 mm PVC Clamp. |
| 77 | Providing, alignment & fixing of collapsible grill shutter approximate weight 65 .00 kg per sqm in position with cement concrete (1:2:4) using 12 x 2 mm and braced with flat iron diagonals 20 x 5 mm size with top & bottom rail of 'T' iron 40 x400 x6 mm with 40 mm dia steel pullys complete with bolts, nuts, locking arrangements, stoppers, handles, carriage, fixing charges and labour cess etc complete. |
| 78 | Dismantling GCI or AC sheet roofing after carefully removing the bolts & nuts including stacking of useful materials for reuse & removing the debries within 50m lead including all labour, T&P, sundries & labour cess etc complete and returning the dismantled materials to the section stores. |
| 79 | Providing and fixing 0.47mm thick TATA bluescope DURASHINE sheet in roof drilling holes in wind ties including fixing of ridges, valleys, including cost of TATA Bluescope Sheet, J or L hook with bitumen washer, limpet washer etc complete including cost of all materials, labour, T&P, sundries and labour cess etc complete. |
| 80 | PART:B: ELECTRICAL INSTALLATION TO 12 Nos \\"F\\" TYPE QUARTERS ( P.H COLONY), UKHEP, BARINIPUT |
| 81 | LIGHT POINT: Surface wiring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor with ISI marked with 20mm dia non-metalic PVC flexible conduit with 5 Amp, 250V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover with suitable size, MS box with 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. (Make of wire Fiolex/ L&T/ Anchor/ Polycab/ Havels/ V Guard) |
| 82 | a) Group-A |
| 83 | b) Group-B |
| 84 | c) Group-C |
| 85 | FAN POINT: Surface wiring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor with ISI marked with 20mm dia non-metalic PVC flexible conduit with 5 Amp, 250V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover with suitable size, MS box with 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. (Make of wire Fiolex/ L&T/ Anchor/ Havels/ Polycab/ V Guard) |
| 86 | a) Group-A |
| 87 | b) Group-B |
| 88 | c) Group-C |
| 89 | CALL BELL POINT: Surface wiring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor with ISI marked with 20mm dia non-metalic PVC flexible conduit with 5 Amp, 250V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover with suitable size, MS box with 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. (Make of wire Fiolex/ L&T/ Polycab/ Anchor/ Havels/ V Guard) |
| 90 | c) Group-C |
| 91 | Surface wiring to submain in 2 X 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty PVC flexible conduit 1.6mm thick alongwith 1 X 1.5 Sq.mm. FR PVC insulated single core multistrand copper conductor as earth wire as required. ( Make- Finolex/ L&T/ Anchor/Polycab/ Havels/ V Guard) |
| 92 | Surface wiring to submain in 2 X 2.5 Sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty PVC flexible conduit 1.6mm thick alongwith 1 X 1.5 Sq.mm. FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make- Finolex/ L&T/ Polycab/ Anchor/ Havels/ V Guard) |
| 93 | Surface wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit 1.6mm thick alongwith 1 X 1.5 Sq.mm. FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make- Finolex/ L&T/ Polycab/ Anchor/ Havels/ V Guard) (AR-2010, Item No.1.8.3, Page-13) |
| 94 | Supply & fixing of 5 pin 5/6 Amp modular socket outlet on the existing switch box/ cover including connections as required. |
| 95 | Supply & fixing of 5 pin 5/6 Amp modular switch on the existing switch box/ cover including connections as required |
| 96 | Supply & fixing of 5 Amp modular Bell Push ISI Marked switch on the existing switch box/ cover including connections as required |
| 97 | Extension Board 5/6 Amp: Supply & fixing of modular base & cover for 6 module on surface with suitable size of phenolic laminated sheet cover infront including providing and fixing 5 pin 5/6 amps modular Socket outlet and 5/6 amps modular switch, connection, painting etc as required. |
| 98 | FOR POWER PLUG/ 32AMP MCB/ DP SWITCH/DP MCB: Supply & fixing of 16/18 SWG metal box of size 200mm x 150mm x 75mm deep (nominal size) on surface with suitable size of phenolic laminated sheet cover infront of it as required |
| 99 | FOR GYSER POINT: Supply & fixing of modular base & cover for 4 module on surface with suitable size of phenolic laminated sheet cover infront including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required. |
| 100 | FOR AC POINT: Supply & fixing of 32 amp DP MCB on the exisitng switch box/ cover including connections as required |
| 101 | FOR KITCHEN ROOM:Supply & fixing of 32 amp DP switch on the exisitng switch box/ cover including connections as required |
| 102 | Supply and fixing of modular base angle holder of ISI marked, including connection etc as required. |
| 103 | Installation, testing & commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 Sq.mm. FR PVC insulated single core multistrand copper conductor and earthing as required. |
| 104 | Installation, testing & commissioning of 10 Amp Step Type ceiling fan Regulator (make Anchore / Roma) in the existing switch box including connection with 1.5 sqmm FR PVC insulated single core multi strand copper conductor, earthing the regulator as required. |
| 105 | BOARD FOR BDB BOX: Supply & fixing of 16/ 18 SWG metal box of sizes 250mm X 300mm X 100mm deep on surface with suitable size of phenolic laminated sheet cover infront of it as required. |
| 106 | BDB BOX: Supply & fixing of 8 Way single pole Double Door MCB DB with sheet steel enclosure, distribution board, on surface, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required. (But without MCB/ RCCB/ ISOLATOR) |
| 107 | BOARD FOR MAIN SWITCH: Supply & fixing of 16/ 18 SWG metal box of sizes 250mm X 300mm X 100mm deep on surface/ recess with suitable size of phenolic laminated sheet cover infront of it as required. |
| 108 | MAIN SWITCH: Supply, installation, testing and commissioning of 63 Amp DP Main switches Rotary type(IS 13940 Part-3, 1993) on the existing surface/ wall mounting and complete with HRC fuse links, interconnections, earthing etc as required as per direction of Engineer in Charge. Make (SEIMENS/ HPL/ ANCHOR/ L&T/ HAVELS/ C&S/ RK. |
| 109 | Supply & fixing of 6 Amp to 32 Amp rating 240V \\"B\\" series miniature circuit breaker suitable for lighting and other loads of single pole and neutral in the existing MCB DB ISI marked complete with connections, testing and commissioning as required. |
| 110 | Earthing with G.I. Earth pipe 3 mtr long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required. |
| 111 | Wiring for twin control light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in surface PVC conduit with 2 way modular type switch with ISI marked, phenolic laminated sheet suitable size ISI marked G.I box(18 SWG) and earthing point with 1.5 sq. mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required ( make of wire - Finolex/ L&T/ Anchor/Havels/ V Guard. |
| 112 | 6 sqmm PVC insulated Aluminium black flat twin core wire |
| 113 | G.I. wire 10 SWG as tension wire for service wire |
| 114 | 4'' I Bolt for service wire |
| 115 | Labour Charges for fixing Service Pipe |
| 116 | Bare copper wire 8 SWG for Earthing Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender