Housing Urban and Rular Development Government Departments Closing in 0 days TDR #58449349

Tender For Providing Of Informaion Kiosks For Tourists At Pahalgam Advt.Cost=₹ 5.76 Lacs, Amount Without Gst= ₹4.88 Lacs, Gst Amount= ₹0.88 Lacs

Issued by Government Departments · Anantnag, Jammu and Kashmir
Tender Value
5.76 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
0 days left
EMD
11520
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Of Informaion Kiosks For Tourists At Pahalgam Advt.Cost=₹ 5.76 Lacs, Amount Without Gst= ₹4.88 Lacs, Gst Amount= ₹0.88 Lacs

BOQ

Name of Work:- Providing of informaion kiosks for Tourists at Pahalgam Advt.Cost=₹ 5.76 lacs, Amount without GST= ₹4.88 lacs, GST Amount= ₹0.88 lacs
Sl. No. Item Description
1Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by EIC. All Kinds of soil
2P/L of dry nallah soling tightly hand packed i/c carriage charges and headload charges complete job.
3Providing and laying in position cement concrete of specified grade Of 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone agg.40 mm nominal size excluding cost of centering and Shuttering all work up to plinth .
4Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5Centering and shuttering including strutting, propping etc. and removal of form work complete job
6Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of steel primer all complete.
7Providing and fixing of wood work in Side frames ,Ceilings,truss,door,windows etc all job complete. KD Wood
8Providing and fixing glazed shutters for doors, windows and clerestory windows Rate for thickness of using 4mm thick float glass panes including ISI marked M.S. pressed butt shutters Hinges bright finished of required size with necessary screws. Second class Kail wood 30MM THICK
9Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with of necessary screws, excluding panelling which will be paid for separately, all shutter complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood 30MM THICK
10Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of Rate for thickness of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 30MM THICK
11P/F of 12 mm thick imported panelling (Newzeeland pine or equilent) of approved pattern and including 10mm plywood exposed surface with two coats of touch wood and polish incl. cost of nails adhesive material cornices etc and all carriages complete job (Design of panelling to be approved by the EIC)
12Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. CHAAR GUL
13Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate.complete.
14Providing and fixing of 12mm thick plywood including cost of nails and other fixtures complete job
15Supplying, fitting and fixing 8mm thick AC4 Grade Waterproof Laminated wooden Flooring Work including cornice of required size with plank size not less than 1218mm x 193mm) mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 850 kg/m3 substrate core over a resin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thick underlayer polyurethane foam on polythene sheet 250 microns, over a smooth, flat, hard subfloor free from moisture (<8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge
16Providing Colour coated Tile Type Profile sheet roofing including vertical/curved surfacfixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5mm induding ridges and valleys
17Providing and fixing plained eaves boarding of 2nd class kail wood 250x32 mm (nominal size ) including synthetic enamel paint (two coats ) over primer coat. Ornamental
18Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer and paint including welding and bolted with special shaped washers etc. comple . Hot finished welded type tubes
19Providing and fixing of 20 mm thick Overlapped deodar weather boarding on the exterior surface with necessary screws/nails including two or more coats of matt/gloss PU polish all job complete
20Carriage of Material sand/bajree for an average leadof 50 kms
21Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch, modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. required. (Havells/Polyrab/Anchor/Finolex/KEI/RR or equivalent make )inct cost of conduit
22Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on jone circuit) (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent inci. cost of conduit
23Supplying and fixing of suitable size Gl box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 16/20/25 A modular socket outlet and 16/20/25A modular switch, connections, etc. as required. (Havells/ SSK/Anchor/ABB/Schneider or equivalent)
24Supplying and fixing of suitable size Gl box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/SSK/Anchor/ABB/Schneider or eq.)
25Point wiring for SA-10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed 5 or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing), (Maximum two points shall be connected on one circuit). (Havells/Polycab/Anchor/Finolex/KEI/RR or equivalent) incl. cost of conduit
26Supplying and and fixing of modular sockets/indicators/switches on existing modular plate and switch box, incl. connections, etc. as required. (Havells/SSK/Anchor/ABB/Schneider or eq.) 1.3 pin SA-10A socket.
27indicator
28Supply, installation, testing and commissioning of 12 Watt LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 80lm/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab/Govt. Of India Operating temperature -10°C to +45°C. The job includes replacement warranty of fixture NO damaged/burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/Philips/Crompton/Jaguar/Wipro). Commercial series.
29Providing, fixing, testing and commissioning of 9 Watt LED lamp (822 cap), BEE/ISI approved, 230 V, cool daylight (6500 K), minimum efficacy 100 lm/W, complete with heavy-duty brass batten holder, including all fixing accessories, making electrical 10 connections, testing and commissioning as required at site. (Havells/Wipro/Philips/Crompton/Bajaj or equivalent). Approved makes: Signify (Philips), Wipro Lighting, Havells, Crompton, Jaquar Lighting, Bajaj Electricals, LEDVANCE or equivalent approved make.
30Supply, installation, testing and commissioning of 1 star 1200 mm sweep ceiling fans of Havells / Crompton Greaves/Bajaj Usha (Sample to be got approved), incl cost of NO extension of Gt rod (if required) and making of necessary connections.
31Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.
32Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/Philips/Crompton)
33Supplying and fixing of modular blanking plates on existing modular plate and switch box excluding modular plate as required.
34Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, incl. cost of conduits (Havells/Polycab/ Finolex/Anchor/KEI/RR or equivalent). 2 x 2.5 sq.mm +1x 2.5 sq. mm earth wire
35Supply and fixing of 12 way Double door surface/recess mounting, Horizontal type, 240 V, SPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer.
36Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 17 KA \\"C\\" curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB NO distribution board complete with necessary connections.
37Supply, installation, testing and commissioning of 32/40 A DP rating 240V, 10 KA \\"C\\" 18 curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.
38Supply, laying, connecting and commissioning of 6 sq. mm 2 core PVC insulated and PVC sheathed power cable of 1.1 KV grade Aluminum LT cable, incl. cost of required al. thimbles duly crimped.
39Providing, supplying, installing, testing and commissioning of single-colour LED strip light of 12 V DC, approximately 4.8-6 W/m, SMD 2835 type, minimum 60 LEDs per metre, in cool white/warm white colour, suitable for decorative outline illumination of an external information kiosk. The strip shall be installed in a suitable protective arrangement with 20 necessary mounting clips, connectors, end caps, wiring and suitably rated 230 V AC/12 V DC power supply, complete with all accessories, labour, testing and commissioning. The rate shall include applicable taxes and all incidental charges, complete in all respects. Make: Luker/Goldmedal/Wipro/Havells/equivalent or superior make, subject to compliance with the specified technical parameters. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58449349
AUTHORITY Government Departments
TENDER VALUE 5.76 Lakhs
LAST DATE 16-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Providing Of Informaion Kiosks For Tourists At Pahalgam Advt.Cost=₹ 5.76 Lacs, Amount Without Gst= ₹4.88 Lacs, Gst Amount= ₹0.88 Lacs
Basic Detail
Tender No ENIT NO 113 OF 2026-27 DATED 08-11-2026
Bidding Type Tender
Location
City Anantnag
State Jammu and Kashmir
Key Dates
Publish Date 09 Nov 2026
Submission Date 16 Nov 2026
Open Date 17 Nov 2026
Finance
Tender Value 5.76 Lakhs
Tender Fee 300
EMD 11520
Exemption Not Available
Document List
223d01bd-af76-4226-b1fb-a13d0baa032c.html
BOQ_1122326.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

223d01bd-af76-4226-b1fb-a13d0baa032c.html

xls

BOQ_1122326.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender