Defence Statutory Bodies & Commissions/Committees Closing in 11 days TDR #58449008

Tender For Addn/Altn To Certain Otm Accomodation At 23 Ed Including Provn Of Tin Shade With Concrete Platform For Dg Sets At 2T(P-134), 3T(P-88), 4T(P-90), 5T(P-156) And Auto Tech Sqn (P-115) At Mtti Af Stn Avadi Under Ge Avadi

Issued by Statutory Bodies & Commissions/Committees · Thiruvallur, Tamil Nadu
Tender Value
38.84 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
11 days left
EMD
77680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Addn/Altn To Certain Otm Accomodation At 23 Ed Including Provn Of Tin Shade With Concrete Platform For Dg Sets At 2T(P-134), 3T(P-88), 4T(P-90), 5T(P-156) And Auto Tech Sqn (P-115) At Mtti Af Stn Avadi Under Ge Avadi

BOQ

Name of Work:- ADDN/ALTN TO CERTAIN OTM ACCOMODATION AT 23 ED INCLUDING PROVN OF TIN SHADE WITH CONCRETE PLATFORM FOR DG SETS AT 2T(P-134), 3T(P-88), 4T(P-90), 5T(P-156) AND AUTO TECH SQN (P-115) AT MTTI AF STN AVADI UNDER GE AVADI
Sl. No. Item Description
1B/R Portion
2Dismantling plain or corrugated steel sheeting of any gauge or thickness, including Nainital or similar-pattern roof coverings, complete, all as specified and directed.
3S&F pre-painted aluminium-zinc alloy-coated steel sheets, 0.50 mm thick, of approved corrugated/profiled section and colour, having a tensile strength of 550 MPa, in roof covering or wall cladding, fixed with suitable self-tapping screws and compatible sealing washers, complete, all as specified and directed.
4S&F pre-painted aluminium-zinc alloy-coated plain steel sheets, 0.50 mm thick, of approved colour, having a tensile strength of 550 MPa, formed and fixed as roof covering, eaves boards, ridges, hips, valley gutters, drips, straight flashings, wall cladding and similar work, including necessary cutting, bending and fixing with suitable self-tapping screws and compatible sealing washers, complete, all as specified and directed.
5Taking down cement plaster from brick or stone masonry wall surfaces, including raking out joints, hacking to form a key and scrubbing down with water, complete, all as specified and directed.
6M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brickwork or concrete surfaces, finished even and fair, including surface preparation and curing, complete, all as specified and directed.
7M&L for 20 mm thick rendering in two coats of 10 mm each, in cement mortar 1:4, on fair faces of brickwork or concrete surfaces of external walls, finished even and fair, including mixing integral waterproofing compound in the second coat at 2% by weight of cement, or at the dosage and in the manner recommended by the manufacturer, including surface preparation and curing, complete, all as specified and directed. Note: Integral waterproofing compound shall be measured and paid for separately as supply only; mixing and incorporation are included in this item.
8M&L for preparation of new wall surfaces and applying two coats of oil-bound distemper of approved shade over one coat of compatible primer, including providing and applying a 1 mm thick layer of wall care putty and rubbing down to obtain a smooth, even surface, complete, all as specified and directed.
9M&L for preparation of newly plastered or previously untreated wall surfaces and applying two coats of cement-based paint of approved shade, including curing as required, complete, all as specified and directed.
10Dismantling wall and ceiling boards, including fibre, pulp and insulation boards, or insulation slabs or blankets, of any thickness, including cover fillets, complete, all as specified and directed.
11S&F non-asbestos fibre cement building boards, 600 × 600 × 4 mm, manufactured from a homogeneous mixture of cement, quartz and cellulose and cured by high-pressure steam autoclaving, conforming to IS 14862, as false ceiling panels, including aluminium snap-grid framework comprising main and cross T-sections, 25 × 25 × 1.5 mm, forming a 600 × 600 mm grid, and perimeter aluminium L-sections, 25 × 25 × 1.5 mm, fixed to walls. The grid shall be suspended and levelled using 4 mm diameter GI wire hangers, connected to the roof slab or trusses through GI flat cleats, 40 × 3 mm and 60 mm long, with 12.5 mm diameter × 40 mm long expansion fasteners where applicable to the supporting substrate, including necessary fixing accessories, complete, all as specified and directed.
12Dismantling floor, hearth or wall tiling, including cement mortar bedding but excluding backing, removing serviceable tiles to the designated store and disposing of rubbish off the premises, complete, all as specified and directed.
13M&L for premium-quality coloured non-skid ceramic tiles, 7–8 mm thick, square or rectangular, each tile exceeding 0.06 m² but not exceeding 0.11 m² in area, conforming to the applicable Indian Standard, laid in floors, etc., set and jointed in neat cement slurry and pointed with white or coloured cement to match the tiles, over and including a 20 mm thick screed bed in cement mortar 1:6, complete, all as specified and directed.
14M&L for glazed ceramic tiles, 350 × 250 × 7 mm or 450 × 350 × 7 mm, of approved colour and pattern, fixed to vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement to match the tiles, over and including a 15 mm thick backing coat in cement mortar 1:6, complete, all as specified and directed.
15Taking down chowkhats or frames, each not exceeding 1.50 m² in area, together with shutters, without removing the shutters from the frames, complete, all as specified and directed.
16S&F anodised aluminium frames for doors, windows and ventilators, with one or more rebates, fabricated from the specified sections, including joining cleats, fixing arrangements and necessary fasteners, complete, all as specified and directed.
17S&F anodised aluminium side-hung window and ventilator shutters without sash bars, fabricated from aluminium sections weighing 0.55 kg per running metre, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beads, screws and anodised aluminium fittings comprising one 150 mm long peg stay, two 100 mm long type B-21 hinges and one suitable handle per shutter, complete, all as specified and directed.
18S&F 4 mm thick figured glass, pinhead pattern, in panes not exceeding 0.50 m² each, including glazing with oil putty, complete, all as specified and directed.
19S&F solid PVC door frames of section 50 × 47 mm, fabricated from 5 mm thick PVC sheet prelaminated on one side and reinforced with MS square tubes, including fixing the frames in openings, complete, in accordance with the specified construction details, all as specified and directed.
20S&F factory-made solid-panel PVC door shutters, 30 mm thick at the stiles, incorporating the specified MS tube framework for the top and bottom rails, enclosed with heat-moulded PVC C-channels and PVC sheet components. The stiles shall incorporate 20 mm wide PVC reinforcing strips bonded internally with solvent cement. Prelaminated PVC sheets shall be provided on both faces in place of plain-coloured sheets, with the specified sheet components at the top, lock and bottom rails and gap inserts at the top and bottom rails. Stiles and rails shall have feathered edges and be joined with solvent cement, including necessary beading and fixing the shutters to the frames at site, complete, in accordance with the specified construction details, all as specified and directed.
21S&F in repairs 100 mm size medium-weight butt hinges of cold-rolled mild steel, including fixing screws, complete, all as specified and directed.
22S&F in repairs 150 mm long anodised aluminium barrel tower bolts of extruded section, including matching keepers and fixing screws, complete, all as specified and directed.
23S&F in repairs 150 mm size cast aluminium handles, anodised, including fixing screws, complete, all as specified and directed.
24S&F 200 mm long anodised aluminium alloy sliding door bolts with hasp and staple, bolt-fixing type, with fixing clips of sheet, cast or extruded sections and sliding bolts of extruded section or cast aluminium alloy, including necessary fixing bolts and accessories, complete, all as specified and directed.
25S&F in repairs white vitreous china washdown water closet pan, pedestal pattern, excluding fixing bolts, flushing cistern and flush pipe, complete, all as specified and directed.
26S&F in repairs white vitreous china squatting water closet pan, Orissa pattern, size 580 × 440 mm, with integral footrests, excluding flushing cistern and flush pipe, including trap, connections to the trap, flush pipe and anti-siphonage pipe, as applicable, and setting the pan and trap in lean cement concrete, complete, all as specified and directed.
27S&F in repairs PVC low-level flushing cistern, 10-litre capacity, valveless siphonic-action type, conforming to IS 7231 of the edition applicable to the contract and bearing the BIS Standard Mark, including inlet assembly, ball/float valve, operating handle, bends, suitable MS support brackets, wall plugs, brass screws and necessary fittings; including taking down the existing high- or low-level flushing cistern, disconnecting and reconnecting pipes, providing and fixing a 32 mm bore PVC flush pipe with connections to the water closet, and making good disturbed wall and floor finishes to match the existing, complete, all as specified and directed.
28S&F white vitreous china washbasin, flat-back type, size 600 × 480 mm, including supporting brackets, but excluding taps, waste fitting, chain and plug, and porcelain stopper, complete, all as specified and directed.
29S&F fancy-type chromium-plated pillar taps, screw-down, high-pressure type, with or without hot/cold identification as specified, with long screwed shanks and fly nuts, suitable for connection to 15 mm bore pipes, complete, all as specified and directed.
30S&F in repairs white vitreous china urinal, half-stall type, excluding flushing cistern, flush pipe and waste pipe, complete, all as specified and directed.
31S&F in repairs 15 mm bore flexible PVC connection pipe, 450 mm long, with two chromium-plated brass nuts and PVC washers, complete, all as specified and directed.
32S&F in repairs 15 mm bore chromium-plated bib tap, fancy type, with crutch or butterfly handle, screw-down type, threaded for connection to an iron pipe or brass ferrule, complete, all as specified and directed.
33S&F in repairs 15 mm bore chromium-plated angle stop valve, fancy type, with wall flange, screw-down, high-pressure type, with crutch or butterfly handle and both ends threaded for connection to pipes or unions, complete, all as specified and directed.
34S&F in repairs chromium-plated brass tubular towel rail, D-type, 20 mm diameter and 600 mm long between flanges, including fixing accessories, complete, all as specified and directed.
35S&F in repairs chromium-plated soap dish, fixed to wall plugs with chromium-plated brass screws, complete, all as specified and directed.
36S&F in repairs mirror, 600 × 450 mm, of selected-quality glass, 5.5 mm thick, with bevelled edges, mounted on 6 mm thick AC building board or commercial plywood, including wooden plugs, chromium-plated brass screws and washers, and aluminium beading, complete, all as specified and directed.
37S&F in repairs glass shelf assembly comprising a 5.5 mm thick sheet-glass shelf, 120 mm wide and 600 mm long, with chromium-plated brackets, guard and railing, including fixing accessories, complete, all as specified and directed.
38M&L for 20 mm thick granite slabs of approved type and shade, table-rubbed and polished, in wall lining/veneering, fixed over and including a 12 mm thick backing coat in cement mortar 1:3, with joints pointed in white cement and marble dust mortar 1:2, with pigment added to match the granite shade, complete, all as specified and directed.
39Taking up or down existing 15 mm bore steel tubing and connections, including disconnecting fittings from the tubing and cleaning for refixing or removing from site, complete, all as specified and directed.
40Supplying and laying 16 mm diameter CPVC pipes, SDR 13.5, with compatible plain CPVC fittings, SDR 11, fixed to walls or ceilings or laid in floors, including solvent-cement jointing, complete, all as specified and directed.
41Supplying and laying 20 mm nominal bore CPVC pipes, SDR 13.5, with compatible plain CPVC fittings, SDR 11, fixed to walls or ceilings or laid in floors, including solvent-cement jointing, complete, all as specified and directed.
42Supplying and laying 25 mm nominal bore CPVC pipes, SDR 13.5, with compatible plain CPVC fittings, SDR 11, fixed to walls or ceilings or laid in floors, including solvent-cement jointing, complete, all as specified and directed.
43Taking up or down existing damaged or unserviceable soil, waste and vent pipes of PVC (SWR), cast iron, AC or salt-glazed stoneware, of the scheduled 75/110 mm sizes, including fittings, accessories and removal of cement mortar around joints or fixings, and removing dismantled materials and rubbish from site, complete, all as specified and directed.
44S&F in repairs 75 mm size PVC (SWR) floor trap, plain type, with grating, including jointing with compatible solvent cement, complete, all as specified and directed.
45S&F in repairs 100 mm diameter PTMT dome grating, weighing not less than 25 g, complete, all as specified and directed.
46S&F 110 mm nominal outside diameter PVC (SWR) drain pipes, single-socketed, in any length, with rubber ring joints, fixed to walls, complete, all as specified and directed.
47S&F PVC (SWR) bends suitable for 110 mm nominal outside diameter pipes, of the specified angle and radius, with access doors, including compatible jointing, complete, all as specified and directed.
48S&F PVC (SWR) single junctions (single tees), suitable for 110 mm nominal outside diameter main pipes, equal or unequal as specified, with access doors, including jointing with compatible solvent cement, complete, all as specified and directed.
49S&F PVC (SWR) vent cowls suitable for 110 mm nominal outside diameter pipes, including jointing with compatible solvent cement, complete, all as specified and directed.
50S&F PVC (SWR) vent cowls suitable for 75 mm nominal outside diameter pipes, including jointing with compatible solvent cement, complete, all as specified and directed.
51S&F 75 mm nominal outside diameter PVC (SWR) drain pipes, single-socketed, in any length, with rubber ring joints, fixed to walls, complete, all as specified and directed.
52S&F PVC (SWR) bends suitable for 75 mm nominal outside diameter pipes, of the specified angle and radius, with access doors, including compatible jointing, complete, all as specified and directed.
53Disconnecting existing water-storage tanks of capacity exceeding 500 litres but not exceeding 1,000 litres, setting aside or lowering where necessary to permit repairs, cleaning or other work, and subsequently hoisting, refixing and reconnecting in position, complete, all as specified and directed. Note: Cleaning, repairs and other treatment shall be measured and paid for separately.
54S&F rotationally moulded polyethylene water-storage tank, cylindrical vertical type with closed top, of 1,000-litre capacity, including hoisting and fixing in position, complete, all as specified and directed.
55Demolition of unreinforced cement concrete in ground floors and pavings, not exceeding 150 mm thick, below or above ground level, complete, all as specified and directed.
56M&L for 100 mm thick plain cement concrete (PCC), nominal mix 1:4:8, type D-2, using 40 mm graded stone aggregate, as a sub-base to receive floor finishes, including laying, compacting, levelling and curing, complete, all as specified and directed.
57M&L for 75 mm thick plain cement concrete (PCC), nominal mix 1:3:6, type C-2, using 40 mm graded crushed stone aggregate, in plinth protection or paths, laid to a slope of 1 in 12, including compacting, curing and finishing the surface even and smooth without using extra cement, necessary formwork to divide the area into panels, and finishing exposed edges fair, rounded or chamfered as specified, complete, all as specified and directed.
58M&L for coloured and polished chequered cement concrete tiles, 300 × 300 × 25 mm, laid in floors or pavings, set, jointed and pointed in neat cement slurry, complete, all as specified and directed.
59E/M Portion
60Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.
61M & L for point wiring with two runs of 1.5 Sqmm (nominal area) PVC insulated,FRLSH sheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 20/25mm dia and its accessories fixing on wall/ceiling/trusses with suitable clamps , screws etc including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified and directed for :-(a) One light point controlled by one switch.
62(b) One Ceiling fan point controlled by one switch and regulator
63(c) One Exhaust fan/wall mounted fan point controlled by one switch.
64(d) One 3 pin 5 amps socket point on same board
65(e) One 3 pin 5 amps socket point on independent board
66(f) One bell / buzzer point controlled by one bell push
67M & L for point wiring with two runs of 4 Sqmm (nominal area) PVC insulated,FRLSH sheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 20/25mm dia and its accessories fixing on wall/ceiling/trusses with suitable clamps , screws etc including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified for One 5 pin 5/15 amps socket point on independent board complete all as specified and directed.
68Taking down carefully unserviceable Power / Sub main wirings with PVC aluminum conductor cables in PVC/STEEL conduits / TW battens up to 2 runs of 6 Sq.mm removing materials from site, taken as credit , making good the disturbed surfaces all as specified and as directed.
69M&L for wiring for circuit / power /sub main wire with two runs of single core 4 Sqmm size and one run of 4 Sqmm (green colour as earth continuity conductor) PVC insulated, unsheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia PVC conduit concealed in wall and fixing arrangement on ceiling/trusses with suitable clamps,screws etc complete with accessories all as specified.
70M&L for wiring for circuit / power /sub main wire with two runs of single core 6 Sqmm size and one run of 6 Sqmm (green colour as earth continuity conductor) PVC insulated, sheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia PVC conduit concealed in wall and fixing arrangement on ceiling/trusses with suitable clamps,screws etc complete with accessories all as specified.
71M&L for circuit/power/submain wiring using two runs of 10 mm² single-core, multistranded copper conductor, PVC-insulated and sheathed FRLSH cable, together with one run of 10 mm² green PVC-insulated copper earth continuity conductor, drawn through and including PVC conduit of suitable diameter, concealed in walls or surface-fixed to ceilings/trusses with suitable clamps, screws and accessories, complete, all as specified and directed.
72S&F 5 A single-pole, piano-type flush switch, including fixing and connections, complete, all as specified and directed.
73S&F 5 A, 3-pin, multipin flush-type socket outlet, including fixing and connections, complete, all as specified and directed.
74S&F 16 A, 3-pin, multipurpose flush-type socket outlet, including fixing and connections, complete, all as specified and directed.
75S&F 5 A, 240 V, single-pole, flush-type bell push, including fixing and connections, complete, all as specified and directed.
76S&F 6 A, one-way modular switch, one-module size, including fixing and connections, complete, all as specified and directed.
77S&F 16 A, one-way modular switch, one-module size, including fixing and connections, complete, all as specified and directed.
78S&F 6 A modular socket outlet, combined 2/3-pin type, two-module size, including fixing and connections, complete, all as specified and directed.
79S&F 6/16 A modular socket outlet, combined 2/3-pin type, two-module size, including fixing and connections, complete, all as specified and directed.
80S&F surface-mounted ceiling rose, 65 × 50 mm, three-terminal type, of moulded phenolic insulating material, including fixing and connections, complete, all as specified and directed.
81S&F in replacement SPN enclosure for an air-conditioner outlet, complete with a two-pole-and-earth plug and socket and one 20 A single-pole MCB, including fixing and connections, all as specified and directed.
82S&F in replacement ding-dong electric bell, suitable for 230 V, 50 Hz AC supply, including fixing and connections, complete, all as specified and directed.
83S&F single-pole MCB, 240 V, 10 kA breaking capacity, C-curve, of the specified current rating within the range 5–32 A, installed in an SPN distribution board, including connections, testing and commissioning, complete, all as specified and directed.
84S&F single-pole-and-neutral MCB, 240 V, 10 kA breaking capacity, C-curve, of the specified current rating within the range 32–63 A, installed in a vertical TPN distribution board, including connections, testing and commissioning, complete, all as specified and directed.
85S&F three-pole MCCB, 415 V, of the specified current rating within the range 25–100 A, with a breaking capacity of 16 kA, including fixing and connections, complete, all as specified and directed.
86S&F three-pole MCCB, 415 V, 100 A, with a breaking capacity of 16 kA, including fixing and connections, complete, all as specified and directed.
87S&F four-pole MCCB, 415 V, 160 A, with adjustable trip settings and a breaking capacity of 36 kA, including fixing and connections, complete, all as specified and directed.
88S&F four-way SPN MCB distribution board, double-door, powder-coated, suitable for 240 V, single-phase AC, 50 Hz supply, with IP43 protection, provision for a double-pole incoming MCB and single-pole outgoing MCBs, tinned copper busbar, neutral link and earth link, including fixing and connections, complete, all as specified and directed. Note: Incoming and outgoing MCBs shall be measured and paid for separately under the relevant items.
89S&F eight-way SPN MCB distribution board, double-door, powder-coated, suitable for 240 V, single-phase AC, 50 Hz supply, with IP43 protection, provision for a double-pole incoming MCB and single-pole outgoing MCBs, tinned copper busbar, neutral link and earth link, including fixing and connections, complete, all as specified and directed. Note: Incoming and outgoing MCBs shall be measured and paid for separately under the relevant items.
90S&F twelve-way SPN MCB distribution board, double-door, powder-coated, suitable for 240 V, single-phase AC, 50 Hz supply, with IP43 protection, provision for a double-pole incoming MCB and single-pole outgoing MCBs, tinned copper busbar, neutral link and earth link, including fixing and connections, complete, all as specified and directed. Note: Incoming and outgoing MCBs shall be measured and paid for separately under the relevant items.
91S&F in replacement four-way TPN MCB distribution board, double-door, powder-coated, suitable for 415 V AC, 50 Hz supply, with IP54 protection, semi-flush-mounted on a wall, with provision for a 63 A TPN incoming MCB and 40 A single-pole outgoing MCBs, tinned copper busbars, neutral link and earth link, including fixing and connections, complete, all as specified and directed. Note: Incoming and outgoing MCBs shall be measured and paid for separately under the relevant items.
92S&F four-way vertical TPN distribution board, double-door, semi-flush-mounted on a wall, complete with busbars, neutral and earth links, blanking plates and accessories, with provision for a 100/125 A three-pole incoming MCCB and 40/63 A outgoing MCBs of the specified pole configuration, including taking down the existing unserviceable distribution board, fixing and connections, complete, all as specified and directed. Note: The incoming MCCB and outgoing MCBs shall be measured and paid for separately under the relevant items.
93S&F eight-way vertical TPN distribution board, double-door, semi-flush-mounted on a wall, complete with busbars, neutral and earth links, blanking plates and accessories, with provision for a 100/125 A three-pole incoming MCCB and 40/63 A outgoing MCBs of the specified pole configuration, including taking down the existing unserviceable distribution board, fixing and connections, complete, all as specified and directed. Note: The incoming MCCB and outgoing MCBs shall be measured and paid for separately under the relevant items.
94S&F in replacement LED tube-light fitting comprising one 20 W, 4 ft long polycarbonate LED tube and an aluminium box-type batten, with microwave motion sensor, compatible electronic driver and rotary-type bi-pin holders, including connection from the ceiling rose to the fitting with PVC-insulated copper flexible cable of the specified conductor area and core arrangement, complete, all as specified and directed.
95S&F 10 W, 2 ft long LED batten fitting, suitable for surface/wall mounting, with polycarbonate housing and diffuser, integrated electronic driver and accessories, suitable for operation on 220/230 V, single-phase AC, 50 Hz supply, including connection from the ceiling rose to the fitting with suitable PVC-sheathed copper flexible cable, complete, all as specified and directed.
96S&F recessed LED backlit panel light, 30/32 W, nominal size 2 ft × 2 ft, with white powder-coated CRCA steel housing, integrated electronic driver and mounting accessories, including connection from the ceiling rose to the fitting with copper flexible cable of the specified conductor area and core arrangement, complete, all as specified and directed.
97Taking down existing unserviceable ceiling fans/exhaust fans declared beyond economical repair, together with downrods where applicable, and depositing the dismantled items in the MES store yard, complete, all as specified and directed.
98S&F ceiling fan, 1,200 mm sweep, suitable for 230 V AC supply, with squirrel-cage induction motor and five-star energy rating, complete with three blades, downrod, fixing accessories and connections, all as specified and directed.
99S&F modular step-type fan regulator, 120 W capacity, two-module size, including fixing and connections, complete, all as specified and directed.
100S&F oscillating air-circulator fan, 450 mm sweep, suitable for wall mounting and operation on 230 V, single-phase AC supply, including mounting accessories and connections, complete, all as specified and directed.
101S&F heavy-duty pedestal fan with metal body, three metal blades and copper-wound motor, rated 230 V, 180 W, 450 mm sweep and 1,440 rpm, complete with accessories and connections, all as specified and directed.
102S&F ventilation fan, 200 mm sweep, 22 W, suitable for 230 V supply, with plastic body, louvres and shutters, including necessary civil work and alterations to the existing steel/aluminium ventilation-window frame, fixing accessories, screws and wall plugs, making good disturbed wall/window finishes to match the existing, and connection with 1 mm² three-core copper flexible cable, complete, all as specified and directed.
103M&L for forming an opening to accommodate a 300 mm sweep exhaust/ventilation fan, of dimensions suitable for the selected fan, including necessary alterations and making good disturbed wall/ventilation-window finishes to match the existing, complete, all as specified and directed.
104M&L for plate earthing with a GI plate electrode, 600 × 600 × 6 mm, installed vertically at the burial levels specified in Electrical Plate No. 3 of the MES Schedule, Part I, including 4 mm diameter GI earth lead protected in 15 mm bore light-grade GI pipe for a length up to 7.50 m, connected to the main switchboard, main control board or electric pole with suitable bolts, nuts, washers, checknuts and lugs. The item includes excavation in any type of soil; PCC 1:3:6, type C-1, inspection chamber; 50 mm thick RCC 1:2:4, type B-1, cover slab reinforced with 8 mm diameter TMT bars at 140 mm centres both ways, with locking arrangement and a handle formed from 450 mm long, 10 mm diameter MS round bar; 20 mm bore medium-grade GI watering pipe with funnel and wire mesh; salt, charcoal, connections and testing, complete, all as specified and directed.
105M&L for 4 mm diameter galvanised steel wire as earth continuity conductor or main earthing lead, fixed to walls or battens, laid in recesses or chases, buried in the ground, drawn through conduit or installed in other specified situations for loop earthing, including fixing accessories and connections, complete, all as specified and directed.
106PART - II - PROVN OF TIN SHADE WITH CONCRETE PLATFORM FOR DG SETS AT 2T(P-134), 3T(P-88), 4T(P-90), 5T(P-156) AND AUTO TECH SQN (P-115) AT MTTI
107Surface excavation in soft/loose soil, not exceeding 300 mm deep and averaging 150 mm deep, including getting out the excavated material, complete, all as specified and directed.
108M&L for hardcore of broken stone boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 150 mm thick, including watering and ramming to a true surface, complete, all as specified and directed.
109M&L for 100 mm thick plain cement concrete (PCC), nominal mix 1:4:8, type D-2, using 40 mm graded stone aggregate, as a sub-base, including laying, compacting, levelling and curing, complete, all as specified and directed.
110M&L for 100 mm thick plain cement concrete (PCC), nominal mix 1:2:4, type B-1, using 20 mm graded granite stone aggregate, in pavings, laid to the specified levels and slopes, including compacting, finishing and curing, complete, all as specified and directed.
111Forming contraction (dummy) joints, 30 mm deep × 10 mm wide, in concrete paving, including preparation of the joint and filling with grade A sealing compound, complete, all as specified and directed.
112Removing excavated soil to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.50 m above the starting point, complete, all as specified and directed.
113Excavation in post holes, each not exceeding 0.50 m³, in soft/loose soil, including getting out, returning and filling around posts with earth or broken rubble mixed with earth in layers not exceeding 250 mm thick, ramming, removing surplus soil to a distance not exceeding 50 m and making good the surface, complete, all as specified and directed.
114M&L for plain cement concrete (PCC), nominal mix 1:5:10, type E-2, using 40 mm graded stone aggregate, in foundations, filling and mass concrete, including placing, compacting and curing, complete, all as specified and directed.
115S&F mild steel tubular work in trusses, purlins and framing for sunshades, roofs, projections and similar work, using electric-resistance-welded or induction-butt-welded steel tubes conforming to IS 1161, grade St 240 as specified, including fabrication, connections, special-shaped washers and erection, complete, all as specified and directed.
116S&F mild steel plates, plain or chequered, and channel sections, of grade Fe 410-W/E250 as specified, cut square or notched, including drilling or punching holes, countersinking where required, and riveted, bolted or welded connections, complete, all as specified and directed.
117S&F pre-painted aluminium-zinc alloy-coated profiled steel sheets, 0.50 mm thick, of approved profile and colour, having a tensile strength of 550 MPa, as roof covering, including necessary cutting, laps and fixing with suitable self-tapping screws and compatible sealing washers, complete, all as specified and directed.
118S&F ridges formed from pre-painted aluminium-zinc alloy-coated plain steel sheets, 0.50 mm thick, of colour matching the roof covering, having a tensile strength of 550 MPa, including cutting, bending to the required profile, laps and fixing with suitable self-tapping screws and compatible sealing washers, complete, all as specified and directed.
119M&L for preparation of new steel surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete, all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58449008
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.84 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Addn/Altn To Certain Otm Accomodation At 23 Ed Including Provn Of Tin Shade With Concrete Platform For Dg Sets At 2T(P-134), 3T(P-88), 4T(P-90), 5T(P-156) And Auto Tech Sqn (P-115) At Mtti Af Stn Avadi Under Ge Avadi
Basic Detail
Tender No 8452/E8
Bidding Type Tender
Location
City Thiruvallur
State Tamil Nadu
Key Dates
Publish Date 09 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 38.84 Lakhs
Tender Fee 500
EMD 77680
Exemption Available
Document List
05409ef0-2fa0-48f4-9bc1-546458a70480.html
8452TENDERDOCUMENTS.pdf
BOQ_895094.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

05409ef0-2fa0-48f4-9bc1-546458a70480.html

pdf

8452TENDERDOCUMENTS.pdf

xls

BOQ_895094.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender