Tender For annual repair & maintenance of To Lwss Rewalsar Town In Np Rewalsar In Tehsil Balh Distt. Mandi (H.P). (Sh:- Laying, Jointing, Testing And Carriage Of Gi Pipe Line 50 Mm Dia (Mc) = 530 Rmt And 25 Mm Dia = 450 Rmt Near Shop Of Sh. Promod To
Tender Value
1.46 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
7 days left
EMD
3000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of To Lwss Rewalsar Town In Np Rewalsar In Tehsil Balh Distt. Mandi (H.P). (Sh:- Laying, Jointing, Testing And Carriage Of Gi Pipe Line 50 Mm Dia (Mc) = 530 Rmt And 25 Mm Dia = 450 Rmt Near Shop Of Sh. Promod To Rain Shelter Near Bus Stand And Near Shop Of Sh. Promod To Pnb Bank (Outer Side Or Inner Side Of The Road)). Rs. 146252 /- Only
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations trenches etc. (for pipes and pits) upto all depths in all kinds of soil such as pick work, jumper work, blasting and chiselling soft / hard rocks where blasting is prohibited in all leads and lifts including jumper work, blasting and chiselling soft / hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of G.I.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by ramming and watering and than disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un-metalled/metalled paved surface of itsoriginal conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respect with in all leads and lifts as per the direction and best satisfaction of Engineer-in-Charge. |
| 2 | Laying, Jointing, testing and carriage in trenches to be leveled to grades, IS marked Gl Pipes (Medium) of following diameters conforming to IS 1239-1991 (Part II) (latest with up to date ammendments) including Butt welding at both the ends to make water tight joint carriage of material upto all leads and lifts. This work also includes fabrication of short pieces bends, tees & other specials etc. made from parent tubes with butt welding in three layers as per applicable for the particular reach & of technical specifications as per site conditions including flushing, cleaning Hydraulic testing complete to the best satisfaction of Engineer in Charge. The laying of pipe shall conform to IS; 5822-1994 and as per CPHEEO manual. The rates also include the carriage of GMS tubes from the JSV Divisional store Baggi to the site of work, butt welding of parent tube, fabrication of short pieces, bends, tees & other specials etc. from parent tubes, flushing, cleaning & hydraulic testing complete in all respect with in all leads & lifts as per direction and entire satisfaction of the Engineer in Charge. (Earth work to be measured and paid for separately). |
| 3 | 50 mm dia (MC) |
| 4 | Laying, jointing, testing and Carriage of GMS tubes (Light Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc complete (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer-in-Charge. |
| 5 | 25 mm dia (LC) |
| 6 | Providing and fixing of GI Union (Heavy Duty) ISI marked as per IS:1879:2010 (Third revision) (Malleable Cast Iron Pipe Fittings) with latest ammendments of following diameter mentioned below complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 7 | 25 mm dia |
| 8 | 15 mm dia |
| 9 | Providing and fixing of GI Nipple (Heavy Duty) ISI marked (UNIK make) with latest ammendments of following diameter mentioned below complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 10 | 25 mm dia |
| 11 | 15 mm dia |
| 12 | Providing and fixing of GI Reducing Tee (Heavy Duty) ISI marked as per IS:1879:2010 (Third revision) (Malleable Cast Iron Pipe Fittings) with latest ammendments of following diameter mentioned below complete in all respect with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 13 | 25x15mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender