Road Transport and Highways Government Departments Closing in 18 days TDR #58446253

Tender For Improvement And Resurfacing Of Mdr Gudur-Gajendragad Km 12.00 To Km 18.00 In Kushtagi Taluk Of Koppal District. (Job No.Crif-Knt-2026-27-249)

Issued by Government Departments · Koppal, Karnataka
Tender Value
4.89 Crore
Estimated cost
Bid Submission
07 Dec 2026
18 days left
EMD
7.34 Lakhs
Bank guarantee accepted
Document Fee
12250
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Koppal → Karnataka
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Improvement And Resurfacing Of Mdr Gudur-Gajendragad Km 12.00 To Km 18.00 In Kushtagi Taluk Of Koppal District. (Job No.Crif-Knt-2026-27-249)

BOQ

Name of Work:- Improvement and resurfacing of MDR Gudur-Gajendragad km 12.00 to km 18.00 in Kushtagi taluk of Koppal District. (Job No.CRIF-KNT-2026-27-249)
Sl. No. Item Description
1Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness including all labour, hire charges of all machineries etc., complete.In area of thorny jungle - By Mechanical Means using Dozer with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
2Earthwork excavation for road work in soil by mechanical means with hydraulic excavator of including cutting and loading in tippers, trimming bottom and sidesslopes, inaccordance with requirements of lines,grades, and cross sections and transporting to the embankment location, unloading,including all labour, hire charges of all machineries etc., complete with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
3Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material including all labour, usage charges of all machinery etc., complete. By Mechanical Means using Hydulic Excavator with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
4Compacting original ground supporting sub grade: Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for subgrade construction including all lead, lifts, loading, unloading, all labour, usage charges of all machinery etc., complete. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
5Construction of Embankment with Material Deposited from Roadway Cutting:Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, spreading, grading by motor grader and consolidation by roller with desired field density not less than 95% of maximum dry density , including all lead, lifts, loading, unloading, all labour, usage charges of all machinery etc., complete. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
6Construction of Embankment with Material obtained from Borrow pits: Construction of embankment with approved material obtained from borrow pits laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, consolidation by roller to the desired field density not less than 95% of maximum dry density including all lead, lifts, loading, unloading, all labour, usage charges of all machinery etc., complete as per table 300-2. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
7Construction of Subgrade and Earthen Shoulders: Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 laid in layers not exceeding 250 mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., speading, grading by motor grador, consolidation by roller including all lead, lifts, loading, unloading, all labour, usage charges of machinery etc., complete. (New road formation) with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
8Granular Sub-Base with Close /Coarse Graded Material (Table:- 400-1) By Mix in Place Method:Construction of granular sub-base by providing spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401, including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead, lifts etc., complete. (Compacted thickness)-Grading V Material with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
9construction of wet mix macadam by providing laying, spreading and compacting of graded stone aggregates as per table 400-12&13, including premixing the materail with water at OMC in mechanical mix plant carriage of mixed material tipper to site paver, laying in uniform layers in sub base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading all lead and lift etc., complete ( compacted thickness) laying using grader with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
10Providing and applying primer coat with slow setting (SS1) bitumen emulsion complying with IS 8887 on prepared surface of granular Base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per table -500-3, including cost of all materials, labour, hire charges of machinery, loading, unloading etc., complete. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
11Providing and applying Tack Coat with Bituminous Emulsion(RS1) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by Air compressor, and spraying, including cost of all materials, labour, hire charges of machinery, loading, unloading stacking, etc complete, with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
12Providing and applying Tack Coat with Bituminous Emulsion(RS1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared granular surface cleaned with mechanical broom & dusting by Air compressor, and spraying, including cost of all materials, labour, hire charges of machinery, loading, unloading stacking, etc completewith all lead and lifts, and as per the directions of Engineer-in-charge of the Work
13Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type HMP using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS -73-2013 of specified grading, premixed with bituminous binder at 4.5% by weight of total mix and filler,transporting the hot mix to work site, laying with the hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause no. 505 complete in all respects including cost of all materials, labour, usage charges of all machinery, loading, unloading,stacking, transporting etc complete.(Compacted thickness), 50 - 75 mm compacted thickness (Grading 2) with 4.50% Bitumen using 60/70 (VG-30) with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
14Providing and laying Bituminous Concrete with higher capacity batch type hot mix plant using crushed aggregates as per table 500-7 of specified grading premixed with bituminous binder VG-30 grade paving bitumen as per clause 504.3.1 complying with IS-73-2013of specified grading, premixed with bituminous binder @ 5.4% of mix and filler @2% by weight of aggregate, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects including cost of all materials, all labours, usage charges of all machinery, lifts, loading, unloading, stacking, transporting etc., complete, (30 - 40 mm compacted thickness). with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
15Pavement Quality M30 grade Concrete (RMC) with OPC &GGBS laid using Paver: Construction of M30 Grade un-reinforced, dowel jointed, plaincement concrete pavement over a prepared sub base with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures, curing compound, steel channels, finishing to lines and grades as per drawing. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
16Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, including, barricading, traffic diversion as per IRC-35, cleaning the surface of dirt, dust and other foriegn matter, demarcation at site, traffuc control,cost of all materials all labour loading, unloading transporting etc., complete.-5.50 kg per Sqm, 2.5 mm thick with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
17Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
18Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.30 mtrs), 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, as per clauses including curing, cost of all materials all labour loading, unloading transporting etc., complete.-90 cm equilateral triangle with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
19Direction and Place Identification Signs upto 0.9 sqm Size Board.-Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.20 mm thick, 3.60mtrs hight, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing, including curing, cost of all materials all labour loading, unloading transporting etc., complete. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
20Providing and erecting Project Display board of size 1.80m verticle and 1.6m horizontal made of cold rolled coil sheet 16 gauge (1.6mm thickness) sheeting strengthened by welding to MS angle of size 35x35x5mm iron frame work on all sides, extra cross verticle angle fixed using nuts and bolts, base of board shall be cleaned, applying red oxide and black paint by sprayer on both sides of the board and all MS iron frame works, back ground of the facing side of the board painted in traffic yellow, project information written in English/Kannada/Hindi, painting letters and numerials in black, fixed on a mild steel angle iron posts 75mmx75mmx6mm, 2 Nos. firmely fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45Cmx45Cmx60Cm, 60Cm below ground level and board 2.80m from ground level ( 2 Nos of 3.80m over all length each ) as per approved drawing including necessary cost of letterings, labour, hire charges of machineries, transportation, loading and unloading etc., complete with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
21Providing and fixing Renforced cement concrete M15 grade Kilometre stone of standard design as perIRC 8-1980 and IRC:26, excavation and fixing in position in M-15 concrete, plastering the exposed faces with CM 1:2, curing, painting and printing letters, necessary reinforcements etc,. including cost of all materials, labour, loading unloading, transporting etc., complete. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work a) Ordinary Kilometre stone
22b) hectometre stone
23Reinforced Cement Concrete Crash Barrier:Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with TMT reinforcement conforming to MoRT&H specification and as per detials given IRC-5 (Fig-5,B) including dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board etc., as per approved drawing and at locations, directed by the Engineer, all as specified. (area-0.243 sqm/mtr, single phase) including curing, cost of all materials all labour loading, unloading transporting etc., complete.M 25 grade concrete (Area-0.243 Sqm. /Meter) with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
24Network Survey Vehicle (NSV) attached with SUV: Data collection of Longitudinal profiling (International roughness Index) . Transverse profiling (Rut depth) Pavement texture in terms of Mean profile depth , Road Geometry data, (Cross slope, gradient, curvature), GPS Coordinates (X, Y, Z) viz longitudinal, latitude & altitude, Video Imaging for Road side furnitures / Road assets and Video imaging for pavement surface Distress and reports with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
25FOR STRUCTURAL WORK Dismantling of Structures :Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material including all labour, usage charges of all machinery etc., complete.By Mechanical Means -Cement Concrete with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
26Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, including all labour, usage charges of machinery loading, unloading transporting etc., complete. Ordinary soil - Mechanical Means - Depth upto 3 m with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
27PCC 1:3:6 in Foundation: Providing & laying Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregates 40mm nominal size mechanically mixed, placed in foundation and compated by vibration including curing,including cost of all materials all labour, usage charges of machinery loading, unloading transporting etc., complete with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
28Laying Reinforced Cement Concrete Pipe NP4 / Prestressed Concrete Pipe on First Class Bedding in Single Row Providing & laying Reinforced cement concrete pipe NP4/ prestressed concrete pipe for culverts on first class bedding of granular material in single row, including fixing collar with with cement mortar 1:2, but excluding excation, protection works, backfilling, concrte and masonry works in headwall and parapetes, including cost of all materials all labour, usage charges of machinery loading, unloading transporting etc., complete 1200 mm dia with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
29Construction of Embankment with Material obtained from Borrow pits: Construction of embankment with approved material obtained from borrow pits laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, consolidation by roller to the desired field density not less than 95% of maximum dry density including all lead, lifts, loading, unloading, all labour, usage charges of all machinery etc., complete as per table 300-2. with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
30Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical pecification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting,all labour, usage charges of machinery loading, unloading transporting, stacking, curing, finishing the exposed faces etc., complete. (excluding cost of steel and fabrication charges) PCC Grade M20 using batching plant transit mixer & manual placing with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
31Stone Pitching: Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications, including cost of all labour, material, usage charges of machinery, loading, unloading, transporting, etc., complete. Stone/Boulder with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
32Supplying, fitting and placing uncoated TMT Fe 500 grade bar reinforcement in Foundation, in Foundation, including cost of all labour, materials, usage charges of machinery, fabrication charges, straightening, cutting, bending, hooking, binding with approved quality of binding wire, after placing in position, tying, lapping and/or welding whereever required (wastages for laps, hooks shall not be measured & paid) with all lead, lifts, loading, unloading, transporting, stacking neatly, etc., complete, as per drawing & Technical specifications with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
33RCC DRAIN (750 m) LHS : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, including all labour, usage charges of machinery loading, unloading transporting etc., complete. Ordinary soil - Mechanical Means - Depth upto 3 m with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
34PCC 1:3:6 in Foundation: Providing & laying Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregates 40mm nominal size mechanically mixed, placed in foundation and compated by vibration including curing,including cost of all materials all labour, usage charges of machinery loading, unloading transporting etc., complete with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
35Providing & laying Plain/Reinforced Cement Concrete in open foundation complete as per drawing & tecnical pecification for Pipe Culvert complete as per Drawing and Technical Specifications, including cost of all materials, formwork, centering, vibrating, compacting,all labour, usage charges of machinery, loading, unloading transporting, stacking, curing, finishing the exposed faces etc., complete. (excluding cost of steel and fabrication charges) PCC Grade M20 using batching plant transit mixer & manual placing with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
36Supplying, Fitting and Placing un-coated TMT Fe-500 grade bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. including straightening bar, cutting, bending, hooking binding with approved quality binding wire, after placing in position, tying, lapping and/or welding whereever required ( laps, hooks & wastages shall not be measured & paid) incluidng cost of all materials, fabrication charges, all labour, material, usage charges of machinery, loading, unloading, stacking, transporting etc., complete.with all lead and lifts, and as per the directions of Engineer-in-charge of the Work
37Providing weep holes in Brick masonry/Plain/ Reinforced abutment, wing wall/ return wall concreteProviding weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications with all lead and lifts, and as per the directions of Engineer-in-charge of the Work Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58446253
AUTHORITY Government Departments
TENDER VALUE 4.89 Crore
LAST DATE 07-12-2026
Authority
Authority Name Ministry Of Road Transport And Highways
Work Description Tender for Improvement And Resurfacing Of Mdr Gudur-Gajendragad Km 12.00 To Km 18.00 In Kushtagi Taluk Of Koppal District. (Job No.Crif-Knt-2026-27-249)
Basic Detail
Tender No EE/NH/HBL/PB3/2026/27/1509-3 Dt07/11/2026
Bidding Type Tender
Location
City Koppal
State Karnataka
Key Dates
Publish Date 07 Nov 2026
Submission Date 07 Dec 2026
Open Date 08 Dec 2026
Finance
Tender Value 4.89 Crore
Tender Fee 12250
EMD 7.34 Lakhs
Exemption Not Available
Document List
b7044cfa-a699-40c5-b63d-0768913c43f7.html
BOQ_981129.xls
Documentssubmit.pdf
Generalconditions.pdf
KW4.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

b7044cfa-a699-40c5-b63d-0768913c43f7.html

xls

BOQ_981129.xls

pdf

Documentssubmit.pdf

pdf

Generalconditions.pdf

pdf

KW4.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender