Tender For Quotation Inviting Basic Rate Of Different Item For Framing Estimate.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
2 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Quotation Inviting Basic Rate Of Different Item For Framing Estimate.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of ceiling mounted 4.0Tr (12000K.cal/hrs) 3 Star rating 4 way cassette inverter type high efficiency compressor, air coold cu condenser, aluminium fins with ocean black fin coating R-32 refrigerant Cassette will be suitalbe for 220V-50Hz powe supply. |
| 2 | Supply of 4.0Tr (12000K.Cal/hrs) for 3 star Floro standing Tower type air conditioners fitted with hermetically sealed compressor operating on Refrigerent R-32, Non CFC sutiable for wall mounting only. Suitalbe for opertion 220v 50 HZ single phase Ac supply capable of conforming (1) Cooling (2) Dehumidifying (3) Ari circulating (4) Filtering |
| 3 | Supply of exterior BIS registered Flexible Outdoor type LED WW neon Flex suitable for application of Façade Lighting. Beam angles : > 115°, flex should hav IP 67 Protection, Product shoul be flexible with minium bending diameter >300mm. Thre rated voltage of the Luminarie shoul be 24VDC, Power consumption shoul be between 12Wmax at steady state full intensity for 1m, SDCM <5. Thre Product should be cuttable at minium 50mm. woking temperature should be -20° C' + 50° C' the productd sholb hav injuction moulding fused end cap for a seamless effect. The product shoul be of size 12 (W) x 12(H) mm with 10% tollerance to the dimension. the productd should be salt water resistant. to be suppoted with Productd test reports LM79, BIS Report and LEDs Test Report and LEDs Test Reports at the ime of supply. |
| 4 | Supply of BIS registered under IS 10322 part 5/ sec 5 with CCT RGBW(W=3000K) (Square/Rectangle/ Circular) shape Projector Light 72W with Die-cast aluminium housing, powder-coated finish, Clear toughened glass.Total System wattage not exceeding 72W with system lumen output >2544lm with all 4 in 1 LEDs on, minimum system lumen efficacy 35-40 lm/w at Full Output On. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control and Controller should of the same make as that of the luminaire to ensure reliability. Luminaire should be complete with dedicated Lens for each LED offering beam angle of different types such as narrow, medium, wide as per the site requirement. Fixture shall be suitable to operate at an ambient temperature range of -10°C to 50°C and complete luminaire shall be IP66 and IK08 rated. LED Life time shall be at least L70B50 @50000 burning hours at 35°C. The product should be Compatible proper with IP 67 rated fused connector. The product should have a glare shield option with the product fixture. Fixture should be >80 CRI for WW LED and SDCM ≤ 5. the product should have the glare shield inbuilt into the casting. The product should have 2 compartments to maximum heat and the product should not have screws over the product to have a clean asthetics LED should be of make Nichea, Osram, Cree, Lumiled or equivalent . Luminaire shall be separately complete with integrated BIS IP66/67 potted driver and capable of operating at line voltage from 100-300 Vac, 50Hz with power factor > 0.9. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be saperately complete with all necessary accessories required for proper working of fixture including weather proof fused connectors with cables, water proof connectors etc.provided saperately for proper fixtures working. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender