Tender For Addition / Alteration And Special Repair To Jco/Or Md Accn At Sevoke Road Military Station Under Ge Sevoke Rd.
Tender Value
3.64 Crore
Estimated cost
Bid Submission
05 Dec 2026
23 days left
EMD
4.39 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration And Special Repair To Jco/Or Md Accn At Sevoke Road Military Station Under Ge Sevoke Rd.
BOQ
| Sl. No. | Item Description |
| 1 | Material & labour for for rendering 15 mm thick cement plaster in cement mortar (1:6) on surfaces of wall, finished even and smooth without using extra cement, complete as all specified and as directed. |
| 2 | Material & labour for rendering 15 mm thick cement plaster in cement mortar (1:4) on surfaces of drain wall, finished even and smooth without using extra cement, complete as all specified and as directed. |
| 3 | Material & labour for PCC, type B-1 (1:2:4), using 20 mm graded aggregate as in coping, bed plate, fillets and similar works including rounded or chamfered on edges including necessary formwork, complete all as specified and as directed. |
| 4 | Material & labour for rendering 20 mm thick cement plaster in cement mortar (1:4) in two layers of 10 mm thick each on fair faces of brick work mixed with water proofing compound as per approved manufacturer's instruction , surface of top layer shall be finished even and smooth without using extra cement, including necessary scaffolding, complete all as specified and as directed.(Note: WPC shall be measured and paid separately). |
| 5 | Material & labour for rendering 5mm thick cement plaster in cement mortar (1:3) to ceiling and finishing the surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 6 | Supply only integral water proofing compound. |
| 7 | Material & labour for applying two coats of oil bound distemper with roller over one coat of primer, including preparation of new surfaces of walls etc, complete all as specified and as directed. |
| 8 | Material & labour for applying three coat of white wash to ceiling, including preparation of new plastered surfaces of ceiling, complete all as specified and as directed. |
| 9 | Material & labour for complete removal of existing treatment of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots including washing down with water etc and applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and as directed. |
| 10 | Material & labour for preparation of new plastered surfaces of walls, applying one coat of Prime seal primer or equivalent chemical as approved by the GE, followed by one coat of Chemstic PDE 600 elastomeric coating under torch-dry condition, and subsequently applying two coats of waterproofing decorative elastomeric coating system, raincoat with dry film thickness (DFT) of 100 microns or Shalicryl 215, as approved by the GE,including necessary scaffolding and required safety measures etc, executed complete all as per manufacturer's instructions and as directed.Note: The aforesaid treatment shall be executed by the contractor from the authorised applicator of the manufacturer(s) and all necessary authenticated documents in respect thereof shall be submitted by the contractor to the GE. |
| 11 | Material & labour for complete removal of existing treatment of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots including washing down with water etc, and applying thereby two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, including necessary scaffolding and required safety measures, complete all as specified by the manufacturer and as directed.Note: The aforesaid treatment shall be executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents in respect thereof shall be submitted by the contractor to the GE |
| 12 | Material & labour for preparation of old surfaces of ceiling and applying 2 coats of white wash, complete all as specified and directed. |
| 13 | Material and labour for 20mm thick Granite (of any type) work, table rubbed and polished, in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of the granite including rounding/nosing to edges over and screed bed or bedding layer of mortar 15 mm thick in CM (1:6), complete all as specified and directed.Note : Hole to be provided in granite slab for gas pipe in kitchen platform etc, |
| 14 | Material and labour for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes and like, in CM 1:6, complete all as specified and directed. |
| 15 | Material & Labour for non-skid coloured ceramic tiles of 7 to 8 mm thickness (square/rectangular), area exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and as directed. |
| 16 | Material & Labour for coloured ceramic tiles of 7 to 8 mm thickness (square/rectangular), area exceeding 0.18sqm but not exceeding 0.38 sqm as in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and as directed. |
| 17 | Material & Labour for rendering 10mm thick cement plaster in CM (1:3) on fair faces of brick work or concrete surfaces, for fixing tiles, complete all as specified and as directed |
| 18 | Material & Labour for coloured glazed ceramic tiles of 7mm thickness and of size 450X350mm in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles, complete all as specified and as directed. |
| 19 | Material & Labour for coloured ceramic tiles of 7 to 8 mm thickness (square/rectangular), area exceeding 0.18sqm but not exceeding 0.38 sqm as in skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and as directed. |
| 20 | Material & Labour for 20-25mm thick Kota stone slab in single piece, in riser of steps,skirting,dado and pillar, laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, rounding/nosing to edges, complete as all specified and as directed. |
| 21 | Material & Labour for 20-25mm thick Kota stone slab in floor, laid over 20 mm thick cement screed bed in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, rounding/nosing to edges, complete as all specified and as directed.. |
| 22 | Material & Labour for 25mm thick chequered cement concrete tiles of size 30cm x 30cm in floors, set, jointed and pointed in neat cement slurry with grey cement and pigments to match the shade of the tiles, over and including 20 mm thick screed bed or bedding layer in CM (1:6), complete as all specified and as directed. |
| 23 | Material & Labour for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in CM (1:6), complete all as specified and as directed. |
| 24 | Material & Labour for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM(1:4), complete all as specified and as directed. |
| 25 | Material & Labour for PCC, type C1 (1:3:6), using 20mm graded aggregate as in back filling of pressed steel frame, complete all as specified and as directed. |
| 26 | Material & Labour for 25 mm thick PCC, type B-0 (1:2:4), using 12.5mm graded aggregate as in levelling course over RCC roof surface, to achieve required slope, including making rounded or chamfered on edges mixed with edges mixed with WPC per approved manufacturer's instruction, complete all as specified and as directed |
| 27 | Material & Labour for 25mm thick Cement concrete, type B-1 (1:2:4), using 20mm graded aggregate as in sub-base, flooring, complete all as specified and as directed. |
| 28 | Material & Labour for Reinforced cement concrete, type B-0 (1:2:4), using 12.5mm graded aggregate, as in chajja, kitchen platform etc, complete all as specified and as directed. |
| 29 | Material & Labour for 25mm thick Cement concrete, type B-0 (1:2:4), using 12.5 mm graded aggregate as in floors, finished even and smooth using extra cement, complete all as specified and as directed. |
| 30 | Material & Labour for 75 mm thick PCC, type C-2 (1:3:6), using 40mm graded mechanically crushed stone aggregate, as in plinth protection /footpath, surface to be finished even and smooth without using extra cement, laid in alternate bays and joint to be filled with bitumen filler, complete all as specified and as directed. |
| 31 | Material & Labour for forming contraction (Dummy) joints, 65mm deep x 10mm wide, filled with sealing compound, complete all as specified and as directed |
| 32 | Material & Labour for solid PVC door frame of size 50mm X 47mm made out of 5mm plain, colour PVC sheet, reinforced with M.S Square tube, complete all as specified and as directed |
| 33 | Supply & Fixing of factory made solid panel PVC Door Shutter, 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete as per specification & drawing and as directed |
| 34 | Supply & Fixing of pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike, plate etc, complete all as specified and as directed. |
| 35 | Supply & Fixing of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike, plate etc, complete all as specified and as directed. |
| 36 | Supply & Fixing to chowkats, factory made glazed and skeleton shutters of thickness 35 mm made from Kiln seasoned and chemically pressure treated 2nd class hard wood; Shutters shall be open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters shall be as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and as directed. |
| 37 | Supply & Fixing of flush shutters of thickness 30 mm, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 38 | Supply & Fixing 18/19 mm thick Block board, grade 1 quality, exterior grade conforming to IS-1659, Commercial type on wall facing side, decorative type on other face finished with decorative veneer, as in cabinets, complete all as specified and as directed. |
| 39 | Material & labour for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and as directed. |
| 40 | Material & labour for external lipping of teak wood, 6mm thick and 18/19mm wide, fixed with nails to block boards, complete all as specified and as directed. |
| 41 | Material & labour for 2nd class hardwood fillets of c/s area exc 3 sqcm but n.exc 6 sqcm, wrought to square or rectangular in section, plain or bull nosed, splayed, chamfered or rounded on one edge or face, fixed with nails, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 42 | Material & labour for 2nd class hardwood fillets of c/s area exc 3 sqcm but n.exc 6 sqcm, wrought to square or rectangular in section, plain or bull nosed, splayed, chamfered or rounded on one edge or face, fixed with nails, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysDec 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender