Tender For Special Repairs To Tiling, Plumbing, Plastering False Ceiling And Galvalume Sheet Roofing Work To Bldg No P-221/7 & 8 Md Accn At Ajay Baugh Under Ge Minniebay, Sri Vijaya Puram (8909/E8)
Tender Value
24 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
18 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Tiling, Plumbing, Plastering False Ceiling And Galvalume Sheet Roofing Work To Bldg No P-221/7 & 8 Md Accn At Ajay Baugh Under Ge Minniebay, Sri Vijaya Puram (8909/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Demoliton of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M & L for 15 mm thick cement plaster in CM 1:3 on concrete surfaces mixed with water proofing compound as per manufactures instruction,finished even and smooth and after ponding test surface shall be dried and bottom and sides of the sunken slab shall be treated with two coats of surface application using approved water proofing compound as per manufactures instructions all as specified and as directed.Note: WPC will be measured and paid seperately |
| 4 | M & L for applying a coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of bituminous primer @0.3 Kg/Sqm complete all as specified and as directed. |
| 5 | M & L for 40 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in sub base for flooring/levelling coarse etc complete all as specified and as directed. |
| 6 | M&L for joint free Coloured Non-Skid Ceramic tiles edge to edge joint 7 to 8 mm thick area of each tiles exc 0.18 Sqm but n exc 0.38 sqm in floors etc colour as approved set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 7 | M&L for ceramic tiles edge to edge joint 7 to 8 mm thick area of each tiles exc 0.18 Sqm but n exc 0.38 sqm on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with floor tiles including 10 mm thick backing plaster in CM (1:4) complete all as specified and directed. |
| 8 | M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 9 | M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and directed. |
| 10 | M&L Granite (of any type) 16 to 20 mm thick machine cut fixed on slab,window cill etc , bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting, moulding & polishing over and including 20 mm thick screed in CM (1:4) complete all as specified and directed. |
| 11 | M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 12 | M&L for Heavy duty vitrifired coloured tiles 400x400x10 mm thick each of tiles in floor/steps/stairs etc set jointed and pointed in neat cement slurry in floors incl 15mm thick screed in CM 1:4 complete all as specified and directed. |
| 13 | Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 14 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed. |
| 15 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 16 | M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 17 | M & L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 18 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately. |
| 19 | M & L rendering 5mm thick in CM (1:3) on ceiling (external) surfaces finished even & smooth without using extra cement. Note: Water proofing compound will be measured and paid separately. |
| 20 | Supply only Integral water proofing compound. |
| 21 | Material and labour for complete removal and applying one coat of white cementitious putty on wall and making the surfaces smooth by rubbing with sand paper to achieve finished surface complete all as specified and as directed. |
| 22 | M&L preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 23 | M&L preparing newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 24 | M & L for complete removel of existing treatment on wall & finishing the surface & appliying two coat of oil bound distemper along with primer complete all as specified and directed. |
| 25 | M & L for complete removel of existing treatment on ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 26 | Taking up or down 20 mm bore tubing and connections and removing off the site complete all as specified and directed. |
| 27 | Taking up or down 25 mm bore tubing and connections and removing off the site complete all as specified and directed. |
| 28 | Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified and directed. |
| 29 | Supply and laying of CPVC pipes 25mm dia outer boreSDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and directed. |
| 30 | Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA). |
| 31 | Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA). |
| 32 | Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) |
| 33 | Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) |
| 34 | Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) |
| 35 | Supply and fixing 20 mm outer dia CPVC Brass Tee |
| 36 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 37 | M & L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, deck slab, shelves and like complete all as specified and directed. |
| 38 | Use and waste of formwork with fair finished surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and simillar work horizontal or sloping etc complete all as specified and directed. |
| 39 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking and hooking ends and binding with MS wire (annealed) of dia not less than 0.90mm complete all as specified and directed. |
| 40 | S&F Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore complete all as specified and directed. |
| 41 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction complete all as specified and directed. |
| 42 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and directed. |
| 43 | M&L Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming(Beam,tee,angle,Channel, hollow sec or flat sections) including distance pieces, cleates etc., complete all as specified and directed. |
| 44 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and directed. |
| 45 | S & F Mild steel screw bolts (machine made) of any dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as specified and directed. |
| 46 | M & L for providing cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in copings,apex stones,bed plates etc complete all as specified and as directed. |
| 47 | Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 48 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 49 | Dismantling of ceiling boarding in description fixed in any position with nails complete all as specified and as directed. |
| 50 | S&F aluminium flat as wind tie fixed with 50mm/75mm aluminium self tapping screws complete all as specified and as directed. |
| 51 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, 12mm Semi With perforated 12mm thick thick micro regular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm ,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 52 | S&F of PVC connections pipes 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 53 | Removing loose and broken concrete/ masonary surface by chiseling/ mechanically etc from the roof slab, coloumn, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and removig to debries 50 Mtr from site all as specified by Engineer-in-Charge. |
| 54 | M/L for applying IPH RB-107 polymer based rust-remover (pH value–12) and applying IPH RB -167 Polymer based rust preventive (pH value-9) to all exposed reinforced bars complete all as specified and directed. |
| 55 | M/L for applying one coat of epoxy bonding coat as per manufacture's instruction to bind with old concrete / wall surfaces of soffit of slab, coloumn, beam and similar structural members for new cement surface complete all as specified and directed. Make : IPH 21 EB of Harjas Coatings & Polymers / Nitobond EP of FOSROC or equivalent make in Dr. Fix it of Pidilite Industries / MC Bauchemie / BASF |
| 56 | M&L for applying polymer modified cement mortar rendering 15mm average thick in CM 1:3 on concrete surface duly mixing polymer modifier 'Nitobond AR' of make: M/s Fosroc Chemicals India (P) Ltd. @ 10 Ltr per bag of cement or equivalent in M/s Harjas Coatings & Polymers @ 5% by wt of cement / M/s Pidilite Industries complete finished even and smooth without using extra cement all as specified and as per manufacturer's instructions. |
| 57 | Preparation of old wooden surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 58 | Preparation of old steel surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 59 | Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as specified and directed. |
| 60 | Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and directed. |
| 61 | S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 62 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 63 | S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 64 | S & F only 4 mm Plain sheet glass ordinary quality ,in square exc 0.5 sqm each complete all as specified and directed. |
| 65 | S & F only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including taking down complete all as specified and directed. |
| 66 | S & F only Figured glass 4 mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed. |
| 67 | S & F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 68 | S & F second class hard wood factory made 40 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 69 | S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed. |
| 70 | M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 71 | M&L Second class hard-wood clean sawn in scantlings framed and fixed complete all as specified and directed. |
| 72 | S&F Aluminium anodised sliding door bolts 250 mm long with hasp and staple complete all as specified and directed. |
| 73 | S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and directed. |
| 74 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 75 | S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and directed. |
| 76 | S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and directed. |
| 77 | S & F butt hinges of stainless steel 150 mm long ISI marked fixed with brass screws complete all as specified and directed. |
| 78 | S & F butt hinges of stainless steel 100 mm long ISI marked fixed with brass screws complete all as specified and directed. |
| 79 | S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 80 | S & F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 81 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed.NOTE:- All joint should be filled with sealant |
| 82 | S&F 30mm width continuous (piano) hinges mild steel finish or electrogalvanised complete all as specified and directed. |
| 83 | S&F 100mm long hasp and staples mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 84 | S&F stainless steel auto closing heavy duty modular hinges of size 103 x 64mm for cupboard shutters all as specified and as directed. |
| 85 | S & F in repair fancy type curtain Rod, stainless steel,chromium plated 25 mm dia with stops, rollers etc complete all as specified and as directed. |
| 86 | S & F in repair brass brackets chromium plated suitable for curtain Rod 25 mm dia complete all as specified and as directed. |
| 87 | S & F Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed. |
| 88 | S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm complete all as specified and directed. |
| 89 | S&F Wash basins including brackets, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 90 | S & F 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 91 | S & F 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 92 | S & F 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed. |
| 93 | S & F 40 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. |
| 94 | S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 95 | S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed. |
| 96 | S & F Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 97 | S & F Bib Taps, long boby with flange cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 98 | S&F brass chromium plated telescopic Hand shower(Health Faucet) (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and directed. |
| 99 | S&F brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed. |
| 100 | S & F Soap Dish,brass chromium plated of approximate size 160 x 160 x 90 mm with screws complete all as specified and as directed. |
| 101 | S & F PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and directed. |
| 102 | S & F 600 mm X 450 mm levelled Edge Mirror of selected quality glass, 5 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed. |
| 103 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed. |
| 104 | S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 105 | S&F in repairs Vitreous China wash down watercloset pan (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 106 | S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slimline or Cera or equivalent make complete all as specified and as directed. |
| 107 | S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc., complete all as specified and directed. |
| 108 | Demolition and breaking up drain pipes of size 75/100 mm dia (Salt glazed ware, AC or Reinforced concrete, PVC (SWR)) set in cement mortar complete all as specified and directed. |
| 109 | Dismantling of cast iron or reinforced concrete / PVC (SWR) drain pipes of size 75/100 mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 110 | S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed. |
| 111 | S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 112 | S & F 75 in repairs mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 113 | S & F in repairs 75 mm bore PVC [SWR] Junction Single [Single \\"T\\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 114 | S&F in repair PVC (SWR) bends with access door 75mm dia complete all as specified and directed. |
| 115 | S&F in repair 75mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed. |
| 116 | S & F in repairs 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 117 | S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 118 | S & F in repairs 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 119 | S & F in repairs 110 mm bore PVC [SWR] branch piece, single (single Y) equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 120 | S & F in repairs 110 mm bore PVC [SWR] Junction Single [Single \\"T\\"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 121 | M &L for Stack clamps for 75mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 122 | M &L for Stack clamps for 100 mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts andsecuring ends of stays to wall or roof complete all as specified and directed. |
| 123 | S&F in repair PVC (SWR) bends with access door 110mm dia complete all as specified and directed. |
| 124 | S&F in repair 110mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed. |
| 125 | S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed. |
| 126 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in sub base, plinth protection etc complete all as specified and directed. |
| 127 | Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM (1:3) or PCC (1:2:4) Type B-1 as required complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender