Tender For Provn Of Hard Standing In Security Area Of Ap Algarah, Provn Of Store Room Near Bldg No T-703 At Age Br Pedong And Provn Of Store Room In Front Of Bldg No P-278 Of Stn Hq Pedong Mil Stn Under Ge 867 Ews.
Tender Value
27.66 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
55320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South District → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Hard Standing In Security Area Of Ap Algarah, Provn Of Store Room Near Bldg No T-703 At Age Br Pedong And Provn Of Store Room In Front Of Bldg No P-278 Of Stn Hq Pedong Mil Stn Under Ge 867 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed by EIC. |
| 2 | Excavation in trenches, n.exc. 1.5m wide and n.exc 1.5 m in depth; for foundation, etc. and getting out in hard/dense soil complete all as specified and directed by EIC. |
| 3 | Returning ,filling in, including, spreading, levelling, watering and well ramming in layers not exc 25cm in hard / dense soil complete all as specified and directed by EIC. |
| 4 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and directed by EIC. |
| 5 | M&L PCC 1:4:8 Type C2 (using 40 mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed by EIC. |
| 6 | M&L for Precast cement cncrete Type C-1, 1:3:6 (20mm graded aggregate) block masonry with factory made solid blocks exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by EIC. |
| 7 | M&L for Damp Proof Course to horizontal or vertical surfaces including necessary formwork. in cement concrete 1:2:4 , 25 mm thick with using water proofing compound 3% by weight of cement by Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m, by using Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 complete all as specified and directed by EIC. |
| 8 | Supply of integral water proofing compound . |
| 9 | M&L for broken stone or bounders hardcore of gauge n exc. 63 mm , deposited, spread and levelled in layers n exc. 15 cm thick , watered and rammed to a floor/true surface complete all as specified and directed by EIC. |
| 10 | M&L for 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded aggregate) as in sub base complete all as specified and directed by EIC. |
| 11 | M&L for 100mm thk PCC Type C2 1:3:6 (40 mm graded aggregate) as in sub base of floor. |
| 12 | M&L for 10 mm thick rendering on fair faces of brick work or concrete surface in cement plaster 1:4 on external surfaces of wall finished even and fair all as specified and as directed by EIC |
| 13 | M&L for 10 mm thick rendering on fair faces of brick work or concrete surface in cement plaster 1:6 on internal surfaces of wall finished even and fair all as specified and as directed by EIC. |
| 14 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair without using extra cement |
| 15 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces on external walls complete all as specified and directed by EIC. |
| 16 | M&L for three coats of white wash on newly plastered surfaces including preparation of surfaces. |
| 17 | M&L for preparation of new plaster surface for applying Two or more coats of white wash |
| 18 | S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A) complete all as specified and directed by EIC. |
| 19 | S&F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by EIC. |
| 20 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by EIC.. |
| 21 | S&F Pressed steel frames of size 125x60 mm for door with one or more rebates including necessary fixing lugs, butt hings, lock strike plate etc., complete as specified |
| 22 | S&F 30mm thick flush door shutters , solid core construction with black board core and plywood face panels,commercial type on both face complete all as specifiedhard & fitted to chowkats complete all as specified and directed by EIC. |
| 23 | S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed complete all as specified and directed by EIC.. |
| 24 | S&F 150mm size aluminium handle cast type anodised complete all as specified and directed by EIC. |
| 25 | S&F 125mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified. |
| 26 | S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed. |
| 27 | M&L for prepration of newly wooden surfaces of any description & applying two coats of synthetic enamel paints over one coat of pink primer incl prepration of surfaces complete all as specified and directed by EIC. |
| 28 | S&F steel windows for glazed with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by EIC. |
| 29 | S&F Framed work such as grills framed guard bars etc confiring to Ge 290 , 10 mm sq bar for guard bars complete all as specified and directed by EIC. |
| 30 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 31 | S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 32 | S&F 4mm thick sheet glass, oridinary quality and glazing with oil putty in square exc 0.5 sqm in each pane. |
| 33 | M&L for 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by EIC. |
| 34 | M&L for Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome all as specified and as directed. |
| 35 | M&L for RCC, (nominal mix) type B-1, 1:2:4 (20mm graded stone aggt) in lintels bands, cills and similar works all as directed by EIC. |
| 36 | M&L for mild steel TMT Bars 10 mm and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less that 0.90 mm dia or securing with chip complete all as specified and directed by EIC. |
| 37 | M&L for mild steel TMT Bars 5mm dia and over upto and incl 10mm dia in stirrups, spacer and binders cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less that 0.90 mm dia or securing with chip complete all as specified and directed by EIC. |
| 38 | Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, lintels, cantilivers , shelves including suports, overhangs etc . Also splays between floor and beams etc complete all as specified and directed by EIC. |
| 39 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 40 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 41 | M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust withadmixture of pigment to match with shade ofgranite |
| 42 | M&L for non-skid colured ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cm 1:6 in flooring complete all as specified and as directed. |
| 43 | Description all as per item No 42.00 here in before but fort on vertical surfaces over and including 10 mm thick back coat in CM 1:3 complete all as specified and as directed. |
| 44 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cm 1:6 in flooring complete all as specified and as directed. |
| 45 | M&L for Glazed coloured ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick backing coat in cm 1:3 as dados/skirting complete all as specified and as directed. |
| 46 | M&L for 75 mm thick PCC type C-1, 1:3:6 (20mm graded stone aggt) as in path, plinth protection etc., complete all as specified and as directed. |
| 47 | M&L for 25mm thk Cement concrete 1:2:4 (20mm graded aggregate) finishing smooth using extra cement complete all as specified and as directed. |
| 48 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed. |
| 49 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed by EIC. |
| 50 | M&L for providing cement concreteType C1 1: 3 : 6 (using 20 mm graded stone aggregate) in coping ,steps,sesmic and simillar bands, plinth course, string course, parapets and railings, bed plates, including weathering slightly rounded or chamfered angles and throating as directed all as specified and as directed. |
| 51 | S&F 75mm dia PVC (SWR) pipes single socketed fixed in as weep hole. |
| 52 | M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC modular boards and plate for mounting switches, sockets, fan regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch complete all as specifed and as directed. NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc. |
| 53 | Description all as per item No 52.00 here in before but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 54 | Description all as per item No 52.00 here in before but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane, with cables, 1.5 sq. mm size |
| 55 | Description all as per item No 52.00 here in before but for on independent board. |
| 56 | Description all as per item No 52.00 here in before but for 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board. |
| 57 | Description all as per item No 52.00 here in before but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size |
| 58 | S&F modular switch, piano type, 5 Amp, single pole, one way, flush type, white or ivory, ISI marked all as specified and as directed. |
| 59 | S&F modular switch, piano type, 15 Amp, single pole, one way, flush type, white or ivory, ISI marked all as specified and as directed. |
| 60 | S&F modular socket outlet, 3 pin, 5 Amps, flush type, ISI marked all as specified and as directed |
| 61 | S&F modular socket outlet, 6 or 5 pin & 15 Amps, flush type, ISI marked all as specified and as directed |
| 62 | S&F lamp holder insulated,with LED lamp 12 watt PVC / polycarbonate /bakelite body complete all as specified and as directed. |
| 63 | S&F ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed. |
| 64 | S&F LED round/square shape 15 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable sizecomplete. |
| 65 | S&F in repairs, security light fitting of building with single piece new generation energy savng and environmental friendly, long life, LED 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable all as specified and as directed. |
| 66 | S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC complete all as specified and as directed. |
| 67 | S&F MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed. |
| 68 | S&F MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed. |
| 69 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed. |
| 70 | M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed. |
| 71 | M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed. Make of wire :- Havels,Finolex, RPG,Standard,HPL. |
| 72 | Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 10 Sqmm, 2 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers complete all as specified and as directed. |
| 73 | Supply and lay DWC Cable duct pipe of size 40 mm dia confirming to IS : 16205 part 24 for laying of LT cables etc complete with all accessories all as specified and directed. |
| 74 | M&L for GI tube light grade for passing through cables under the floor ,along the wall or along the pole of 25 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 75 | M&L for GI tube light grade for passing through cables under the floor ,along the wall or along the pole of 25 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender