Defence Statutory Bodies & Commissions/Committees Closing in 6 days TDR #58445561

Tender For Special Repair Renewal Of Old Unserviceable Gi Pipe Lines And Allied Works In Inf Zone At Kalimpong Mil Stn Under Ge 867 Ews.

Issued by Statutory Bodies & Commissions/Committees · kalimpong, West Bengal
Tender Value
38.35 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
76700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair Renewal Of Old Unserviceable Gi Pipe Lines And Allied Works In Inf Zone At Kalimpong Mil Stn Under Ge 867 Ews.

BOQ

Name of Work:- SPECIAL REPAIR RENEWAL OF OLD UNSERVICEABLE GI PIPE LINES AND ALLIED WORKS IN INF ZONE AT KALIMPONG MIL STN UNDER GE 867 EWS.
Sl. No. Item Description
1Excavation in trenches n.exe 1.5m wide and n.exe 1.5m deep for foundation, laying of pipes etc or for shafts, wells, cesspits, manholes etc., n.exe 10 sqm on plan and getting out in soft/ loose soil, etc. complete all as specified and as directed.
2Returning filling in trenches including spreading leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil, etc. complete all as specified and as directed.
3Removing excavated surplus materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, etc. complete all as specified and as directed.
4Taking down 20mm dia GI tubing including connections and cleaning & re-fixing the same in new or old position of walls, ceiling, floors or laid in floor and trenches including necessary new ISI marked pipe fittings such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug and connections, etc. complete all as specified and as directed.Note : Excavation and earth work shall be measured and paid separately.
5Description all as per item No 4.00 here-in-before but 25 mm bore dia, etc. complete all as specified and as directed.
6Description all as per item No 4.00 here-in-before but 40 mm bore dia, etc. complete all as specified and as directed.
7Description all as per item No 4.00 here-in-before but 50 mm bore dia, etc. complete all as specified and as directed.
8Description all as per item No 4.00 here-in-before but 80 mm bore dia, etc. complete all as specified and as directed by Engr-in-Charge.
9S&F 20 mm dia medium grade galvanised iron tubing with necessary new ISI marked pipe fittings such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug and connections laid in trenches or on gound including taking down existing water tubing, etc. complete all as specified and as directed.
10Description all as per item No 9.00 here-in-before but 25 mm bore dia, etc. complete all as specified and as directed.
11Description all as per item No 9.00 here-in-before but 40 mm bore dia, etc. complete all as specified and as directed.
12Description all as per item No 9.00 here-in-before but 50 mm bore dia, etc. complete all as specified and as directed.
13Description all as per item No 9.00 here-in-before but 80 mm bore dia, etc. complete all as specified and as directed.
14Description all as per item No 9.00 here-in-before but 100 mm bore dia, etc. complete all as specified and as directed.
15S&F 1000 Ltrs capacity Rotational moulded polyethylene water storage tank of cylindrical/vertical with closed top hoisted and fixed in position with all necessary fitting such as tank nipple and locking arrangement including dismantling of existing water tank, etc. complete all as specified and as directed.
16Description all as per item No 15.00 here-in-before but 750 ltr capacity, etc. complete all as specified and as directed.
17S&F in repairs 25mm bore PTMT ball valves of high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule, etc. complete all as specified and as directed by Engr-in-Charge.
18S&F in repairs 20mm bore PTMT ball valves of high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule, etc. complete all as specified and as directed by Engr-in-Charge.
19S&F in repairs 50mm Gun metal globe valve iron wheel screwed both end for iron pipe, etc. complete all as specified and as directed.
20S&F in repairs 40mm Gun metal globe valve iron wheel screwed both end for iron pipe, etc. complete all as specified and as directed.
21S&F in repairs 25mm Gun metal globe valve iron wheel screwed both end for iron pipe, etc. complete all as specified and as directed.
22S&F in repairs 20mm Gun metal globe valve iron wheel screwed both end for iron pipe, etc. complete all as specified and as directed.
23M&L for cross arms, bracings, supports clamps, stay clamps etc fabricated from structural steel sections including nuts, bolts, washers welding bending cold or hot drilling holes for bolts any size of shape and including hooks & clamps for making / extension of structure as required and preparation and applying two coats of black paint over a coat of red oxide primer, etc. complete all as specified and as directed.
24M&L for PCC type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of cement concrete, etc. complete all as specified and as directed.
25M&L for Hardcore of guage exc 63mm but n.exc. 100 mm, deposited, spread and levelled in layers n.exc. 15 cm thick including removing of laied existing materials, etc. complete all as specified and as directed.
26M&L for PCC type C-1 (1:3:6) (using 20 mm graded stone aggregate) as in foundation, filling and mass concrete including demolition of cement concrete, etc. complete all as specified and as directed.
27M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement including taking down cement plaster, etc. complete all as specified and as directed.
28M&L for precast cement concrete block masonry of type C-1 (1:3:6) (using 20 mm graded stone aggregate) machine pressed solid blocks, exc 10 cm in width and setting in cement mortar 1:6 including demolition of existing brick/block masonry work, etc. complete all as specified and as directed.
29M&L for construction of brick masonry valve pit of size 1100mm x 900 mm x 1000 mm (internal dimensions), using old size sub class 'B' brick, built in CM 1:6 including 10 mm thick rendering in CM 1:4 on both sides of internally and externally walls with 75 mm thick PCC type C-2 (1:3:6) (using 40mm graded stone aggregate) as in foundation and PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in benching with 2mm thick mild steel sheet cover mounted on angle iron frame of size 50 mm x 50 mm x 6 mm thick embedded in PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in coping, fitted with proper locking arrangement, hinges and handle of suitable size and preparation of steel surfaces and applying two coats of black bituminous paint over a coat of red oxide zinc chrome primer including dismantling/demolition of existing pit, etc. complete all as specified and as directed by Engr-in-Charge.
30M&L for construction of brick masonry valve pit of size 900mm x 900 mm x 900 mm (internal dimensions), using old size sub class 'B' brick, built in CM 1:6 including 10 mm thick rendering in CM 1:4 on both sides of internally and externally walls with 75 mm thick PCC type C-2 (1:3:6) (using 40mm graded stone aggregate) as in foundation and PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in benching with 2mm thick mild steel sheet cover mounted on angle iron frame of size 50 mm x 50 mm x 6 mm thick embedded in PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in coping, fitted with proper locking arrangement, hinges and handle of suitable size and preparation of steel surfaces and applying two coats of black bituminous paint over a coat of red oxide zinc chrome primer including dismantling/demolition of existing pit, etc. complete all as specified and as directed by Engr-in-Charge.
31Dismantling / disconnecting of unserviceable sluice valve assembly complete by removing old nuts & bolts, packing sheet and supply & Fix new ISI Marked 100mm CI Sluice valve with stainless steel spindle confirming to ISI including jointing material such as nuts & bolts and packing, etc. complete all as specified and as directed by Engr-in-Charge.
32Dismantling / disconnecting of unserviceable sluice valve assembly complete by removing old nuts & bolts, packing sheet and supply & Fix new ISI Marked 80mm CI Sluice valve with stainless steel spindle confirming to ISI including jointing material such as nuts & bolts and packing, etc. complete all as specified and as directed by Engr-in-Charge.
33M&L for cutting of 25 to 40 mm dia existing GI steel pipe for alterations or additions (each cut measured) and inserting necessary new ISI marked pipe fittings such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug and connections, etc. complete all as specified and as directed by Engr-in-Charge.
34M&L for cutting of 50 to 100 mm dia existing GI steel pipe for alterations or additions (each cut measured) and inserting necessary new ISI marked pipe fittings such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug and connections, etc. complete all as specified and as directed by Engr-in-Charge.
35Taking down and refixing of old serviceable PVC water storage tanks including GI fittings wherever required in new or old position of upto 500 ltrs capacity, etc. complete all as specified and as directed.
36Taking down and refixing of old serviceable PVC water storage tanks including GI fittings wherever required in new or old position of 750 to 1000 ltrs capacity, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information
37Taking down and refixing of old serviceable PVC water storage tanks including GI fittings wherever required in new or old position of 750 to 1000 ltrs capacity, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58445561
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.35 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair Renewal Of Old Unserviceable Gi Pipe Lines And Allied Works In Inf Zone At Kalimpong Mil Stn Under Ge 867 Ews.
Basic Detail
Tender No 8653/E8
Bidding Type Tender
Location
City kalimpong
State West Bengal
Key Dates
Publish Date 07 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 38.35 Lakhs
Tender Fee 500
EMD 76700
Exemption Available
Document List
32c2f1b6-5d63-451c-9f96-91cfa7c03868.html
BOQ_895080.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

32c2f1b6-5d63-451c-9f96-91cfa7c03868.html

xls

BOQ_895080.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender