Defence Statutory Bodies & Commissions/Committees Closing in 5 days TDR #58445558

Tender For Special Repair To Bldg No T-77 (Dining Hall) Of 179 Mh And Provn Of Toilet And Bath Room At Jcos Accn At 2 Fid At Kalimpong Mil Stn Under Ge 867 Ews.

Issued by Statutory Bodies & Commissions/Committees · kalimpong, West Bengal
Tender Value
37.03 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
5 days left
EMD
74060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Bldg No T-77 (Dining Hall) Of 179 Mh And Provn Of Toilet And Bath Room At Jcos Accn At 2 Fid At Kalimpong Mil Stn Under Ge 867 Ews.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 18-Nov-2026 BOQ CORRIGENDUM BOQ 28-Nov-2026

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO T-77 (DINING HALL) OF 179 MH AND PROVN OF TOILET AND BATH ROOM AT JCOs ACCN AT 2 FID AT KALIMPONG MIL STN UNDER GE 867 EWS.
Sl. No. Item Description
1Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings, etc. complete all as specified and as directed.
2S&F Pre-painted Galvalume aluminium Zinc cooating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering, ridges fixed with self tapping screws, etc. complete all as specified and as directed.
3S&F Pre-painted Galvalume aluminium Zinc cooating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering,ridges fixed with self tapping screws, etc. complete all as specified and as directed.
4Dismantling structural steel work wrought iron or mild steel work of any description not otherwise provided, etc. complete all as specified and as directed.
5S&F Joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A), etc. complete all as specified and as directed.
6S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A), etc. complete all as specified and as directed.
7S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment incl necessary cutting/notching/ drilling rivertting/welding or connecting with bolts or nuts all as directed.( Fe 410-W Gde E-250 Quality A), etc. complete all as specified and as directed.
8S&F mild steel bolts exc 20 mm n.exc 25 mm diameter of neck purpose made with hexagonal or square head one end and screwed the other, or screw both end each screw end to be fitted with washers and one hexagonal or squre nut exc 15 cm, etc. complete all as specified and as directed.
9Demolition of RCC of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition, etc. complete all as specified and as directed.
10M&L for RCC (Nominal mix) type B-1 (1:2:4) (using 20mm graded stone aggregate) as in beams, cantelivers, bressmers, lintel over 1.5m span, etc. complete all as specified and as directed.
11M&L for RCC (Nominal mix) type B-1 (1:2:4) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc. complete all as specified and as directed.
12M&L for Precast RCC cover slab (Nominal mix) type B-1 (1:2:4) (using 20mm graded stone aggregate)as in slabs with plain faces including setting in CM 1:4, etc. complete all as specified and as directed.
13S&F 10mm dia and over TMT bars Mild steel bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc. complete all as specified and as directed.
14S&F 5 mm dia and over upto and including 10 mm dia TMT bars Mild steel bars in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc. complete all as specified and as directed.
15M&L for Form work to sides and soffit of floor or roof beams,beam haunching, girders, Shelves including support etc. in flat rough finished surfaces of concrete, etc. complete all as specified and as directed.
16Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet, etc. complete all as specified and as directed.
17S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.5mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, etc. complete all as specified and as directed.
18S&F Hangers 2mm G.I. (upto 1200 mm length adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, etc. complete all as specified and as directed.
19M&L for non asbestos fibre cement building board 600x 600 mm and 4 mm thick fixed or laid in ceiling inserted to GI/Aluminium framework with screws, etc. complete all as specified and as directed.
20Demolition of brick work or stone/boulder masonary buit in cement mortar including all quions ,arches ,pillars etc but excluding ashler facing dressed stone work and precast concrete, etc. complete all as specified and as directed.
21M&L for brick work sub class 'B' bricks, straight or curved on plan, exc 6m mean radius built in CM 1:6, etc. complete all as specified and as directed.
22M&L for brick work sub class 'B' bricks, straight or curved on plan, exc 6m mean radius built in CM 1:6 but except bricks, etc. complete all as specified and as directed.
23Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
24M&L for 10 mm thick Rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, etc. complete all as specified and as directed.
25M&L for 15 mm thick Rendering in CM 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, etc. complete all as specified and as directed.
26Supply only integral water proofing compond, etc. complete all as specified and as directed.
27M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 2mm thick wall care putty (Birla white or equivalent), etc. complete all as specified and as directed.
28M&L for preparation of new plastered surfaces of wall and applying Two or more coats on new surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, etc. complete all as specified and as directed.
29M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, etc. complete all as specified and as directed.
30M&L for Preparation of old or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint, etc. complete all as specified and as directed.
31Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, etc. complete all as specified and as directed.
32M&L for 10 mm thick light shade Vitrified cremic tiles (square/rectangular) polished, area of each tile n.exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the coloure of tiles over and including 15 mm thick screed bed in CM 1:4, etc. complete all as specified and as directed.
33M&L for 10 mm thick light shade Vitrified cremic tiles (square/rectangular) polished, area of each tile n.exc 0.36 sqm on vertical surfaces etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the coloure of tiles over and including 10 mm thick rendering in CM 1:3, etc. complete all as specified and as directed.
34M&L for 20mm thick table rubbed and polished Granite of any type work as in steps, jambs, pillars, window-cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick sreed bed in CM 1:4, etc. complete all as specified and as directed.
35M&L for 20-25 mm thick machine cut Kota stone slabs as in flooring jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded over and including 20 mm thick screed bed or bedding layer in CM 1:6, etc. complete all as specified and as directed.
36M&L for 20-25 mm thick machine cut Kota stone slabs as in vertical surfaces such as dado/skirting jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded over and including 10 mm thick rendering in CM 1:4, etc. complete all as specified and as directed.
37M&L for 30cmX30cmX25cm thick coloured & pre-polished chequred cement concrete tiles set jointed and pointed in neat cement slurry as in floors including 20mm thick screed bed in CM 1:6, etc. complete all as specified and as directed.
38Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided, etc. complete all as specified and as directed.
39M&L for 75 mm thick PCC type B-2 (1:2:4) (using 40 mm graded stone aggregate) as in sub base of flooring, etc. complete all as specified and as directed.
40M&L for 75 mm thick PCC type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in plinth protection, etc. complete all as specified and as directed.
41M&L for PCC type C-1 (1:3:6) (using 20mm graded stone aggregate) as in coping including necessary form work , etc. complete all as specified and as directed.
42M&L for PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as in surface channel and drains , etc. complete all as specified and as directed.
43Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete surface in CM (1:4) finished even & smooth without using extra cement, etc. complete all as specified and as directed.
44Taking down chowkhats or frame n.exc 1.50 sqm each with shutter without taking off shutters from the frame, etc. complete all as specified and as directed.
45Taking down chowkhats or frame exc 1.50 and n.exc 4.00 sqm each with shutter without taking off shutters from the frame, etc. complete all as specified and as directed.
46S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc. complete all as specified and as directed.
47S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, Tower bolts and handles of 2 Nos in each door, hinges, anodised aluminum snap beading screws, etc. complete all as specified and as directed.
48S&F Powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminiu snap beading, screws, anodised aluminium fittings such as peg stays 150mm long of 1.00 No. hinges type B-21, 100mm long of 2 No, suitable handle of 1 No each shutter, etc. complete all as specified and as directed.
49S&F Anoidised Aluminium grill (Anodised transperent or dyed to required shade according to IS :1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to existing window frame with C.P brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, etc. complete all as specified and as directed.
50M&L for 12 mm thick prelaminated Particle board exterior grade prelaminated both side with decorative choice laminations fixed with screws to timber frame work or to aluminium frames as in doors and partitions, etc. complete all as specified and as directed.
51M&L for up to 5.00 mm thick Sheet glass of ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, etc. complete all as specified and as directed.
52S&F in repair stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.
53S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page No. 160 of SSR Part -II, etc. complete all as specified and as directed.
54S&F 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame, etc. complete all as specified and as directed.
55S&F 100 mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised, etc. complete all as specified and as directed.
56S&F 150 mm long aluminium anodised barrel tower bolt of extruded section, etc. complete all as specified and as directed.
57S&F 100mm long aluminium anodised alloy handels of extruded fabricated, etc. complete all as specified and as directed.
58S&F Anodised aluminium window (two/three track) sliding type without sash bar and ventilator shutters ((lower type),aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc. complete all as specified and as directed.
59S&F 4 mm thick frosted/ pin headed glass in ventilator shutters, etc. complete all as specified and as directed.
60Dismantling boarding of any description fixed in any position with nails, etc. complete all as specified and as directed.
61M&L for 20mm thick 2nd class hard wood boarding, supplied and fixed with nails in any situation except flooring and skirting, etc. complete all as specified and as directed.
62M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer, etc. complete all as specified and as directed.
63Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, etc. complete all as specified and as directed.
64Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, etc. complete all as specified and as directed.
65S&F 15 mm bore galvanised tubing of medium grade with and including all GI fitting such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug and fixed to wall and ceiling or laid in/on floor, etc. complete all as specified and as directed.
66S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, waste pipe etc overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc. complete all as specified and as directed.
67S&F in repair 15 mm bore fancy type CP long body bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed with wall flanges, etc. complete all as specified and as directed.
68Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site, etc. complete all as specified and as directed.
69S&F 75mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, etc. complete all as specified and as directed.
70S&F 75 mm bore PVC (SWR) bend of any radius with access door, etc. complete all as specified and as directed.
71M&L for 75mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement, etc. complete all as specified and as directed.
72S&F 25mm dia decorative type curtain rod (curtain rails) of stainless steel (SS-304 grade) including suitable selective choice decorative knobs and brackets fixed with wall flange and screws including takingdown existing curtain rods, etc. complete all as specified and as directed by Engr-in-Charge.
73Excavating in trenches n.exc 1.5m. wide and n.exc. 1.5m. in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on planand getting out in soft/loose soil, etc. complete all as specified and as directed.
74Returning filling including spreading, levelling, watering & well ramming in layers not exc 25 cm, etc. complete all as specified and as directed.
75Removing excavated material n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, etc. complete all as specified and as directed.
76Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces as in soft/loose soil, etc. complete all as specified and as directed.
77M&L for PCC type C-2 (1:3:6) (using 40mm graded stone aggregate) as in foundation, filling/mass concrete, etc. complete all as specified and as directed.
78S&F steel work in tubular truss or vertical post of different size bend to shape, cut to length etc,including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240, etc. complete all as specified and as directed.
79M&L for 5mm thick or over Mild steel plates, plain or chequered, FE -290 (Gde E-165) , etc. complete all as specified and as directed.
80Surface dressing n.exc 15 cm deep for soft and loose soil, etc. complete all as specified and as directed.
81M&L for Sand filling under floors or in foundations including watering and consolidation, etc. complete all as specified and as directed.
82M&L for Hardcore of gauge n.exc 63mm broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, etc. complete all as specified and as directed.
83M&L for PCC type D-2 (1:4:8) (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, etc. complete all as specified and as directed.
84M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting ofpaver block as per required size and pattern, finishing and sweeping extra sand, etc. complete all as specified and as directed.
85M&L for 7 to 8 mm thick Non - skid Ceramic coloured tiles (square/ rectangular) area of each tile exc 0.11sqm b.not exc 0.18 sqm as in floors and set and jointed in neat cement slurry and pointed with epoxy filler to match over and including 15mm thick screed bed in CM 1:4, etc. complete all as specified and as directed.
86S&F 450 x 300 mm x 7 to 8 mm thick Coloured Glazed ceramic tiles as in skirting /dado set and jointed in neat cement slurry and pointed with epoxy filler to match over and including 10mm rendering in CM 1:3, etc. complete all as specified and as directed.
87M&L for PCC type B1 (1:2:4) (using 20mm graded stone aggregate) as in roof kerbs, coping or mud stops, rounded or chamfered on edges, etc. complete all as specified and as directed.
88M&L for RCC (Nominal Mix) type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in chajjas, etc. complete all as specified and as directed.
89M&L for RCC (Nominal Mix) type B-1 (1:1.5 :3) (using 20 mm graded stone aggregate) in RCC lintel, band etc, etc. complete all as specified and as directed.
90Formwork to chullah hoods, chajjas,troughs and similar items including edges of rough finished flat surfaces of concrete, etc. complete all as specified and as directed.
91M&L for 40mm PCC Type B-0 (1:2:4) (using 12.5mm graded stone aggregate) as in Damp proof course to horizontal or vertical surfaces including necessary formwork, etc. complete all as specified and as directed.
92M&L for burnt modular brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6, etc. complete all as specified and as directed.
93S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 3mm dia Single GI adustable suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress , etc. complete all as specified and as directed by Engr-in-Charge. Make: E Board of approved make
94M&L for preparation of new plastered surfaces of external wall and applying thin layer of wall care putty to get smooth surface and applying two coats of apex /weather coat paints over a coats of damp shield Primer, etc. complete all as specified and as directed by Engr-in-Charge.
95S&F 20mm dia galvanised GI tube of medium grade with all fitting and fixed complete to walls and ceilings or laid in floors, etc. complete all as specified and as directed.
96S&F vitreous china wash down water closet pan (Pedestal pattern) white excluding flushing cistern but including seat cover white closed type and flush pipe, etc. complete all as specified and as directed.
97S&F 15mm dia Flex Tube Chrome Finish & Wall Hook Hand Shower/Health Faucet of ABS body with 1.25 meter long easy, etc. complete all as specified and as directed.
98S&F Fancy type CP towel Ring fixed with wall flanges and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), etc. complete all as specified and as directed.
99S&F 10Lt capcity PVC valveless syphonic action pipe low level flushing cistern white with 600mm long PVC Connection of PTMT nuts at both ends, inlet ball valve, float, flush pipe and handle including brackets, etc. complete all as specified and as directed.
100S&F vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of GI brackets, brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, etc. complete all as specified and as directed.
101S&F 32 mm dia CP waste coupling for glazed wash basins with fly nuts and fixed with wall flanges, etc. complete all as specified and as directed by Engr-in-Charge.
102S&F 32mm dia PTMT 610 mm long waste pipe suitable for WHB, etc. complete all as specified and as directed by Engr-in-Charge.
103S&F 15mm dia CP Pillar taps of cast copper alloy with capstan heads screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts including 600mm long PVC connection of PTMT nuts at both ends screwed for iron pipe and fixed, etc. complete all as specified and as directed.
104S&F 15mm dia CP Wall mixer 2-in-1 including 125 mm dia overhead shower with arm, complete with 115 mm long bend pipe fixed with wall flenges including making good distrubed wall surface, etc. complete all as specified and as directed by Engr-in-Charge.
105S&F 15mm size 600 mm long PTMT PVC connection pipe with two nuts at each ends with rubber washer, etc. complete all as specified and as directed.
106S&F in repairs angle 15 mm bore fancy type CP stop valve with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, etc. complete all as specified and as directed.
107S&F in repairs 15 mm bore fancy type CP bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, etc. complete all as specified and as directed.
108S&F Fancy type brass CP Tubular towel rail of 20 mm dia D' type 60cm long between flanges, etc. complete all as specified and as directed.
109S&F Fancy type CP Soap dish fixed to plugs with chromium plated brass screws, etc. complete all as specified and as directed.
110S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, etc. complete all as specified and as directed.
111S&F 5.5mm thick sheet glass self/corner self assembly consisting of sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long, etc. complete all as specified and as directed.
112M&L for laying 150 mm internal dia pipes of salt glazed stoneware drain pipe conforming to IS 651-1972 grade ‘A’ in trenches and jointed in CM 1:1 for as shown on drawings, etc. complete all as specified and as directed.
113M&L for PCC type C-2 (1:3:6) bed to drain pipes of 150mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested; , etc. complete all as specified and as directed.
114M&L for Cutting into existing manholes for connecting new drains, making good to 150mm pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC type B-1 (1:2:4) (using 20mm graded stone aggregate) and finished soomth and reforming benching as required, etc. complete all as specified and as directed.
115S&F 110mm dia PVC (SWR) Junction (Single T) of equal or unequal, etc. complete all as specified and as directed.
116S&F 110 mmdia PVC (SWR) Cowls, etc. complete all as specified and as directed.
117S&F 75 mm dia PVC pipe (SWR) of single socketed with rubber ring joints fixed to walls, etc. complete all as specified and as directed.
118S&F 75 mm dia PVC (SWR) bends any radius, etc. complete all as specified and as directed.
119S&F 75mm dia PVC (SWR) Junction (Single T) of equal or unequal, etc. complete all as specified and as directed.
120Taking down unserviceable copper/aluminium point wiring of any description, including all associated fittings such as switches, socket outlets, switch-socket combinations, lamp holders, ceiling roses, regulators, etc., and making good the disturbed surfaces of walls, floors, etc., to match the existing finishes, etc. complete all as specified and as directed.
121M&L for point wiring with 1.5 Sq.mm PVC insulated and un-sheathed single core FRLSH copper cable of 1100 volts grade, multi-stranded conductor, drawn through and including PVC casing and capping not less than 20 mm size (medium grade) fixed on surface with all necessary accessories, along with continuous 1.5 Sq.mm PVC insulated FRLSH copper earth wire connected to common earth dolly, including providing and fixing of modular type PVC surface box of suitable size complete with modular frame (grid) and cover plate, making good disturbed surfaces, complete for light/call bell point controlled by one switch, etc. complete all as specified and as directed.
122Description all as per item No 121.00 here-in-before but one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board, etc. complete all as specified and as directed.
123Description all as per item No 121.00 here-in-before but one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board, etc. complete all as specified and as directed.
124S&F 6A Modular switch of 1 way, 1 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed.
125S&F 16A Modular switch of 1 way, 1 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed.
126S&F 6A Socket 2/3 pin combined 2 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed.
127S&F 6A/16A Socket 2/3 pin combined 2 module 230 Volts, 50Hz, ISI marked, etc. complete all as specified and as directed.
128S&F 65 X 50 mm Ceiling rose surface bakelite three terminal, etc. complete all as specified and as directed.
129S&F 20W LED batten surface/wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC, etc. complete all as specified and as directed.
130S&F 36W recessed type LED Panel Light 600 mm × 600 mm suitable for operation on 140–270 V AC supply, complete with powder coated die-cast aluminium housing, high quality glare free diffuser, independent electronic driver duly wired up to terminal block and all fixing accessories. The fitting shall have minimum system efficacy ≥100 lm/W, PF ≥0.90, CRI ≥80, THD ≤10%, IP20 protection, 6500K CCT, beam angle 120°, flicker ≤5%, instant start, inbuilt surge protection ≥3 kV and minimum life ≥35,000 burning hours, complete with internal connections, testing and commissioning in all respects, etc. complete all as specified and as directed.
131S&F 35W LED building security light fitting 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including G.I pipe bracket ,bracket mounting clamp,bolts and nut, etc. complete all as specified and as directed.
132S&F 10W LED bulkhead light with system efficiency of ≥90 lumens/W, Ingress protection IP 66, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria with range 150-270V AC all as per specified and directed.pressure die-cast housing along with polycarbonate diffuser and LED's IP-65 protction of watt,PF>0.95, etc. complete all as specified and as directed.
133M&L for taking down existing sub main wiring of any type and size laid in surface/recessed on wall/ceiling including removing from saddles, conduits, etc. complete all as specified and as directed by Engr-in-Charge.
134M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length, etc. complete all as specified and as directed.
135Dismantling of distribution boards (DBs) and making good the disturbed surfaces to match existing finishes, etc. complete all as specified and as directed by Engr-in-Charge.
136S&F sheet metal enclosure, double door type (IP-43), SPN Distribution Board, duly phosphatised and powder coated, complete with 100 Amps rated copper busbar, neutral link and earth bar, 8-way, suitable for 240 Volts, single phase, 50 Hz AC supply, flush or surface mounted as required, including all accessories and interconnections, etc. complete all as specified and as directed.
137S&F sheet metal enclosure, double door type (IP-43), SPN Distribution Board, duly phosphatised and powder coated, complete with 100 Amps rated copper busbar, neutral link and earth bar, 4-way, suitable for 240 Volts, single phase, 50 Hz AC supply, flush or surface mounted as required, including all accessories and interconnections, etc. complete all as specified and as directed.
138S&F 6-32 Amps 240 Volts, 10 kA, ‘C’ curve Double Pole (DP) MCB of SPN DB, including connections, testing and commissioning, etc. complete all as specified and as directed by Engr-in-Charge.
139S&F 5–32 Amps 240 Volts, 10 kA, ‘C’ curve, SP MCB of MCB DB, complete with connections, testing and commissioning, etc. complete all as specified and as directed.
140M&L for repair of earthing complete with galvanised steel earth plate electrode of size 600 × 600 × 6 mm, buried directly in ground at a depth not less than 2.25 m below ground level, with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of galvanised iron/steel bolts, nuts, check nuts and washers, and connected to equipment as directed, including providing funnel with GI medium grade watering pipe of 20 mm bore with wire mesh, charcoal or coke and common salt in alternate layers of 150 mm compacted thickness all around the earth electrode, complete with PCC type C-1 (1:3:6) (using 20mm graded stone aggregate) as chamber, and 50 mm thick precast RCC type B-1 (1:2:4) (using 20mm graded stone aggregate) as cover slab reinforced with 8 mm dia deformed bars at 150 mm centre to centre with suitable handle of 10 mm dia round bar, including GI medium grade pipe for protection of earth lead, complete with necessary excavation in soft/loose soil and disposal of excavated earth to a distance not exceeding 50 m, including dismantling of existing earthing and testing on completion, complete all as shown on Electrical Plate No. 3 of MES SSR Part-I, etc. complete all as specified and as directed.
141Taking out old unserviceable underground cable of any size and type from trenches, walls, roofs, etc., for necessary repairs, replacement or re-laying works, etc. complete all as specified and as directed by Engr-in-Charge.Note: Excavation and earthwork shall be measured and paid for separately.
142M&L for providing, laying, testing and commissioning of XLPE insulated, PVC bedded, galvanised steel strip/wire armoured, 1100 Volts grade heavy duty power cable with stranded aluminium conductor of size 10 sq mm, 2 core, laid in ground/on wall/air as required, including supply and fixing of suitable glands, lugs, nuts, bolts and washers at both ends, complete with all connections, testing and commissioning, etc. complete all as specified and as directed.
143M&L for Providing Sub-Class ‘B’ bricks of standard size for covering of cables, laid dry flat in trenches, etc. complete all as specified and as directed.
144S&F 40 mm dia galvanised GI steel pipe of light grade laid in trenches or underground/under floor/under road or fixed to pole for protection of cable/earth strip, including clamps with nuts & bolts and washers, etc. complete all as specified and as directed.
145Taking out/dismantling of existing 20 mm and 25 mm GI/PVC pipes of nominal bore, including bends, tees, elbows, unions, valves and all other fittings, from trenches, walls, floors or any other location, etc. complete all as specified and as directed by Engr-in-Charge.
146S&F and laying of 25 mm GI tubing of medium grade including all fittings such as bends, tees, sockets, unions, clamps, and accessories to laid in trenches or fixed to wall/ceiling with suitable supports, including cutting, threading, jointing, and testing, etc. complete all as specified and as directed.
147S&F and laying of 20 mm GI tubing of medium grade including all fittings such as bends, tees, sockets, unions, clamps, and accessories to laid in trenches or fixed to wall/ceiling with suitable supports, including cutting, threading, jointing, and testing, etc. complete all as specified and as directed.
148S&F 1000 litres capacity Rotational moulded polyethylene water storage tank of vertical cylindrical, closed top including all necessary fittings such as inlet, outlet, overflow, washout pipe, tank nipple, and locking arrangement including taking down existing tanks, etc. complete all as specified and as directed.
149M&L for cutting, screwing, threading and fixing of GI tubing of 25 mm to 32 mm nominal bore for alterations or additions to existing pipe lines, etc. complete all as specified and as directed.
150S&F 25 mm Gun metal gate valve with iron wheel head, screwed at both ends suitable for connection with nominal bore GI tubing, including jointing, testing and making leak-proof connections, etc. complete all as specified and as directed.
151S&F 20 mm Gun metal gate valve with iron wheel head, screwed at both ends suitable for connection with nominal bore GI tubing, including jointing, testing and making leak-proof connections, etc. complete all as specified and as directed.
152S&F 25 mm high-pressure PVC float valve with polythene float and fly nuts, screwed type suitable for connection with iron pipe or PVC ferrule including making necessary connections, adjustments and testing for proper operation, etc. complete all as specified and as directed.
153M&L for preparation of old steel surfaces of any description exceeding 10 cm in width or girth, including cleaning, removing dust, grease, etc and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer of approved colour and make, etc. complete all as specified and as directed.
154M&L for concealed point wiring with two runs of 1.5 sq mm PVC insulated, unsheathed, FRLSH, 1100 Volts grade, ISI marked, multi-stranded copper conductor cable of proper colour coding, drawn through and including non-metallic PVC conduit (medium grade) with all necessary fittings and accessories, concealed in wall/ceiling or fixed to roof as required, including one run of 1.5 sq mm PVC insulated, multi-stranded, unsheathed copper conductor FRLSH cable (green colour) as earth continuity conductor connected to common earth dolly, including fixing of modular metal flush boxes of suitable size and thickness flush to wall with modular back plate and top cover for mounting of switch/bell push/socket etc., including cutting of chases and making good the disturbed surfaces to match existing finish, for one light/exhaust fan point controlled by one 5/6 Amps one-way switch, etc. complete all as specified and as directed.
155Description all as per item No 154.00 here-in-before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board, etc. complete all as specified and as directed.
156M&L for Sub-main wiring along with earth wire comprising two runs of 2.5 Sq.mm and one run of 2.5 Sq.mm earth wire, single core PVC insulated FRLSH copper conductor cable, drawn through and including 25 mm dia rigid non-metallic PVC conduit concealed in wall/ceiling, including chasing, cutting and making good disturbed surfaces to match the existing finish, complete.(Note: Three runs of 2.5 Sq.mm cable including one run of earth wire drawn through 25 mm dia conduit shall be measured as one unit length), etc. complete all as specified and as directed.
157S&F 25 litre Capacity electric water heater(Geyser) of storage type steel body with copper inner tank and heating element upto 2 KW of BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe, etc. complete all as specified and as directed.
158S&F 20/25 Amp DBOX type MCB protected socket comprising PVC insulated enclosure with inbuilt plug top and socket, complete with 01 No. SP MCB C curve, suitable for 220–240 Volts AC supply, including making necessary electrical connections, testing and commissioning, etc. complete all as specified and as directed by Engr-in-Charge.
159S&F Lamp holder of insulated body with back plate for batten fitting, etc. complete all as specified and as directed.
160S&F 15W LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink, etc. complete all as specified and as directed by Engr-in-Charge.
161S&F 10W LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC, etc. complete all as specified and as directed by Engr-in-Charge.
162S&F 6-32 Amp 240V, 10KA 'C' curve Miniature Circuit Breaker (MCB) of DP in the MCB DB including connection, testing and commissioning, etc. complete all as specified and as directed by Engr-in-Charge.
163S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including all fixing arrangement, etc. complete all as specified and as directed.
164M&L for providing, laying, testing and commissioning of XLPE insulated, PVC bedded, galvanised steel strip/wire armoured, 1100 Volts grade heavy duty power cable with stranded aluminium conductor of size 6 sq mm, 2 core, laid in ground/on wall/air as required, including supply and fixing of suitable glands, lugs, nuts, bolts and washers at both ends, complete with all connections, testing and commissioning, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information
165M&L for providing, laying, testing and commissioning of XLPE insulated, PVC bedded, galvanised steel strip/wire armoured, 1100 Volts grade heavy duty power cable with stranded aluminium conductor of size 6 sq mm, 2 core, laid in ground/on wall/air as required, including supply and fixing of suitable glands, lugs, nuts, bolts and washers at both ends, complete with all connections, testing and commissioning, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58445558
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 37.03 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Bldg No T-77 (Dining Hall) Of 179 Mh And Provn Of Toilet And Bath Room At Jcos Accn At 2 Fid At Kalimpong Mil Stn Under Ge 867 Ews.
Basic Detail
Tender No 8669/E8
Bidding Type Tender
Location
City kalimpong
State West Bengal
Key Dates
Publish Date 18 Nov 2026
Submission Date 28 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 37.03 Lakhs
Tender Fee 500
EMD 74060
Exemption Available
Document List
9f096955-a68a-4b47-a06e-3ba8fac20a8a.html
BOQ_895074.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

9f096955-a68a-4b47-a06e-3ba8fac20a8a.html

xls

BOQ_895074.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender