Tender For Special Repair To Bldg No T-107 And T-135C Of 27 Mtn Div Sig Regt At Kalimpong Mil Stn Under Ge 867 Ews.
Tender Value
22.63 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
15 days left
EMD
45260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-107 And T-135C Of 27 Mtn Div Sig Regt At Kalimpong Mil Stn Under Ge 867 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings, etc. complete all as specified and as directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, etc. complete all as specified and as directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws, etc. complete all as specified and as directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided, etc. complete all as specified and as directed. |
| 5 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc confirming to Fe 410-W (gde 250 quailty A) , etc. complete all as specified and as directed. |
| 6 | Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work), etc. complete all as specified and as directed. |
| 7 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet, etc. complete all as specified and as directed. |
| 8 | S&F False ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction, etc. complete all as specified and as directed.Make : Everest or equvalent as approved by GE. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the, etc. complete all as specified and as directed. |
| 10 | M&L for 30cm x 30cm x 25mm thick coloured & polished Chequered cement concrete tiles, set, jointed and pointed in neat cement slurry as in floors over and includig 20mm thick screed bed in CM 1:6, etc. complete all as specified and as directed. |
| 11 | M&L for 7 to 8 mm thick non skid ceramic coloured tiles premium quality conforming to relevant IS (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in CM 1:6, etc. complete all as specified and as directed. |
| 12 | M&L for 10mm thick Vitrified Ceramic tiles (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n.exc 0.42 sqm as in floors and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including 20mm thick screed bed in CM 1:6 , etc. complete all as specified and as directed. |
| 13 | M&L for 10mm thick Vitrified Ceramic tiles (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm as in vertical suraces like skirting, jamb etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick rendering in CM 1:4, etc. complete all as specified and as directed. |
| 14 | M&L for 350x 250x 7 mm or 450X 350X 7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick rendering in CM 1:4, etc. complete all as specified and as directed. |
| 15 | Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level), etc. complete all as specified and as directed. |
| 16 | M&L for 50 mm thick PCC type C-1 (1:3:6) (using 20 mm graded crushed stone aggregate) as in floor/ plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges, etc. complete all as specified and as directed. |
| 17 | M&L for PCC type B-1 (1:2:4) (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work, etc. complete all as specified and as directed. |
| 18 | Demolition of brick work or stone/boulder masonary buit in cement mortar including all quions ,arches ,pillars etc but excluding ashler facing dressed stone work and precast concrete, etc. complete all as specified and as directed. |
| 19 | M&L for old size sub class B bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 having compressive strength not less than 75 kg/Sq cm, etc. complete all as specified and as directed. |
| 20 | M&L for old size sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 having compressive strength not less than 75 kg/Sq cm, etc. complete all as specified and as directed. |
| 21 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 22 | M&L for 10 mm thick rendering in CM 1:6 on fair faces of Brick/stone masonry surfaces and finished even and fair without using extra cement, etc. complete all as specified and as directed. |
| 23 | M&L 15 mm thick rendering ( in two coats 10mm+5mm) in CM 1:4 on other than fair faces of brick work or concrete surface on external walls and finished even and fair mixed with integral water proofing compound @ 3% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated, etc. complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only. |
| 24 | Supply only integral water proofing, etc. complete all as specified and as directed. |
| 25 | M&L for preparation of new plastered surfaces of wall and applying three coat of cement base paint over a coat of primer, etc. complete all as specified and as directed. |
| 26 | M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint, etc. complete all as specified and as directed. |
| 27 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care putty (Birla white or equivalent), etc. complete all as specified and as directed. |
| 28 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper using mechnical spray gun/hand rollars over a coat of interior wall primer with and including 1mm thick wall care putty in two coats (Birla white or equivalent), etc. complete all as specified and as directed. |
| 29 | Taking down chowkhats or frame exc 1.50 sqm & n. exc 4 Sqm each with shutter (without taking off shutters from the frame), etc. complete all as specified and as directed. |
| 30 | Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame), etc. complete all as specified and as directed. |
| 31 | S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc. complete all as specified and as directed. |
| 32 | S&F pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc. complete all as specified and as directed. |
| 33 | S&F 35 mm thick second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers. The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I, etc. complete all as specified and as directed. |
| 34 | S&F 35 mm thick second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and without sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats. The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I, etc. complete all as specified and as directed. |
| 35 | S&F Steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, etc. complete all as specified and as directed. |
| 36 | S&F Steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, etc. complete all as specified and as directed. |
| 37 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, etc. complete all as specified and as directed. |
| 38 | S&F Steel window or ventilator fixed type with glazing bar, etc. complete all as specified and as directed. |
| 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, etc. complete all as specified and as directed. |
| 40 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, etc. complete all as specified and as directed. |
| 41 | S&F 100mm size butt hinges of medium weight, cold rolled, mild steel, etc. complete all as specified and as directed. |
| 42 | S&F 150 mm long Aluminium anodised barrel tower bolt of extruded section and fixed with screws, etc. complete all as specified and as directed. |
| 43 | S&F 125 mm size Aluminium handles of cast type, anodised and fixed with screws, etc. complete all as specified and as directed. |
| 44 | S&F 150 mm size Aluminium handles, cast type, anodised and fixed, etc. complete all as specified and as directed. |
| 45 | S&F 300 mm long Aluminium alloy anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy, etc. complete all as specified and as directed. |
| 46 | S&F in repair of small fittings such as brackets of any type latch and hinge block, shaped door window stops and the like in second class hard wood article n.exc 200 cucm each, etc. complete all as specified and as directed. |
| 47 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 , etc. complete all as specified and as directed. |
| 48 | S&F Stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed. |
| 49 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane, etc. complete all as specified and as directed. |
| 50 | S&F 4.00 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.50 sqm in each pane, etc. complete all as specified and as directed. |
| 51 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide, etc. complete all as specified and as directed. |
| 52 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, etc. complete all as specified and as directed. |
| 53 | Demolition and breaking up old broken PVC (SWR), Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site, etc. complete all as specified and as directed. |
| 54 | S&F 110 mm bore PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, etc. complete all as specified and as directed. |
| 55 | S&F 75 mm bore PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, etc. complete all as specified and as directed. |
| 56 | S&F 110 mm bore PVC (SWR) bend any radius with access door, etc. complete all as specified and as directed. |
| 57 | S&F 75 mm bore PVC (SWR) bend any radius with access door, etc. complete all as specified and as directed. |
| 58 | S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement, etc. complete all as specified and as directed. |
| 59 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement, etc. complete all as specified and as directed. |
| 60 | S&F 110x75 mm bore PVC (SWR) reducer including jointing with solvent cement, etc. complete all as specified and as directed. |
| 61 | S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement, etc. complete all as specified and as directed. |
| 62 | Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, etc. complete all as specified and as directed. |
| 63 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, etc. complete all as specified and as directed. |
| 64 | S&F 15 mm bore GI galvanisedtubes of medium grade with all necessary GI fittings such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug and fixed complete to wall and ceiling or laid in/on floor, etc. complete all as specified and as directed. |
| 65 | Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, etc. complete all as specified and as directed. |
| 66 | S&F 20 mm bore GI galvanisedtubes of medium grade with all necessary GI fittings such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug and fixed complete to wall and ceiling or laid in/on floor, etc. complete all as specified and as directed. |
| 67 | S&F in repairs water closet pan pedestal pattern white,excluding fixing bolts, flushing cistern and flush pipe including PVC seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device complete all as specified and directed including dismantling existing EWC, etc. complete all as specified and as directed.Make : Hindware, Jaquar or equvalent. |
| 68 | S&F 10 Ltr capacity PVC flushing cistern valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, etc. complete all as specified and as directed. |
| 69 | S&F in repairs Vitreous China wash basin, flat back pedestal, size 450x300mm white, excluding taps, waste, chain and plug and rcelain stopper but including brackets, etc. complete all as specified and as directed. |
| 70 | S&F in repair 15mm bore fancy type CP Pillar tap of cast copper alloy with capstan headscrewed down high pressure, with or with out lettered \\"Hot\\" or \\"Cold\\" with long screw shank and fly nuts, screwed for iron pipes, etc. complete all as specified and as directed. |
| 71 | S&F in repairs Brass chromium plated shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union, etc. complete all as specified and as directed. |
| 72 | S&F Fancy type Wall mixer 2 in 1 System-FLR with Provision for Overhead shower with 115 mm Long Bend pipe fixed with wall flanges, etc. complete all as specified and as directed.Make : Jaquar or equivalent |
| 73 | S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers, etc. complete all as specified and as directed. |
| 74 | S&F in repairs 15 mm bore Fancy type CP Angle stop valve with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, etc. complete all as specified and as directed. |
| 75 | S&F in repair 15 mm bore Fancy type CP Bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed with wall flanges, etc. complete all as specified and as directed. |
| 76 | S&F in repairs Fancy type CP tubular towel rail of 20mm dia D' type 60cm long between flanges, etc. complete all as specified and as directed. |
| 77 | S&F in repairs CP Soap dish fixed to plugs with chromium plated brass screws, etc. complete all as specified and as directed. |
| 78 | S&F in repairs bevelled edge mirror of selected quality glass, of any size mounting on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, with and including aluminium edging around of mirror, etc. complete all as specified and as directed. |
| 79 | S&F 25mm dia decorative type curtain rod (curtain rails) of stainless steel (SS-304 grade) including suitable selective choice decorative knobs and brackets fixed with wall flange and screws including takingdown existing curtain rods, etc. complete all as specified and as directed by Engr-in-Charge. |
| 80 | Taking down carefully unserviceable copper/aluminium point wiring of any description (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of wall, floor etc. to match with existing finishes, etc. complete all as specified and as directed. |
| 81 | M&L for Point wiring with 1.5 Sq.mm PVC insulated and un-sheathed single core FRLSH copper cable of 1100 volts grade, multi-stranded conductor, drawn through and including PVC casing and capping not less than 20 mm size (medium grade) fixed on surface with all necessary accessories, along with continuous 1.5 Sq.mm PVC insulated FRLSH copper earth wire connected to common earth dolly, including providing and fixing of modular type PVC surface box of suitable size complete with modular frame (grid) and cover plate, making good disturbed surfaces, complete for light/fan/call bell point controlled by one switch, etc. complete all as specified and as directed. |
| 82 | Description all as per item No 81.00 here-in-before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on same board, etc. complete all as specified and as directed. |
| 83 | Description all as per item No 81.00 here-in-before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board, etc. complete all as specified and as directed. |
| 84 | Description all as per item No 81.00 here-in-before but forone switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable, etc. complete all as specified and as directed. |
| 85 | S&F 5/6A Piano switch flush button of single pole, one way, etc. complete all as specified and as directed. |
| 86 | S&F 5A Switch socket combination 2–in–1 of 3 Pin flush type, etc. complete all as specified and as directed. |
| 87 | S&F 6/16A Switch socket combination 2–in–1 of 5 Pin flush type universal, etc. complete all as specified and as directed. |
| 88 | S&F 65 X 50 mm Ceiling rose surface bakelite three terminal, etc. complete all as specified and as directed. |
| 89 | S&F Lamp holder insulated body with back plate for batten fitting, etc. complete all as specified and as directed. |
| 90 | S&F 15W LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink, etc. complete all as specified and as directed. |
| 91 | S&F 20W LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC, etc. complete all as specified and as directed. |
| 92 | S&F 10W LED batten surface / wall mounted with extruded aluminium box type housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) with operating range of 150-270 V AC, etc. complete all as specified and as directed. |
| 93 | S&F 9W Wall mounting LED lamp brushed nickel finish fixture with acrylic diffuser suitable with B22 base, etc. complete all as specified and as directed. |
| 94 | S&F 35W LED building security light fitting 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including G.I pipe bracket, bracket mounting clamp,bolts and nut, etc. complete all as specified and as directed. |
| 95 | S&F 10W LED bulkhead light with system efficiency of ≥90 lumens/W, Ingress protection IP 66, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria with range 150-270V AC all as per specified and directed.pressure die-cast housing along with polycarbonate diffuser and LED's IP-65 protction of watt,PF>0.95, etc. complete all as specified and as directed. |
| 96 | S&F DBOX type MCB protected socket comprising PVC insulated enclosure with inbuilt plug top and socket, complete with 01 No. SP MCB of 20/25 Amp rating, C curve, suitable for 220–240 Volts AC supply, including making necessary electrical connections, testing and commissioning, etc. complete all as specified and as directed. |
| 97 | M&L for Sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm medium grade non-metalic PVC casing caping on surface of wall/roof including existing wireing, etc. complete all as specified and as directed.Note: Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length. |
| 98 | M&L for Sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm medium grade non-metalic PVC casing caping on surface of wall/roof including taking down existing wiring, etc. complete all as specified and as directed.Note : Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length. |
| 99 | S&F TPN DB with suitable for TPN MCB incomer, double door (IP-43), 4 way, built- in 100 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, flushed in wall or fixed on surface, etc. complete all as specified and as directed. |
| 100 | Dismantling and taking down unserviceable main switches, DBs/metal clad socket etc. any type / size including MCBs and making good disturbed surfaces to match with the existing finishes, etc. complete all as specified and as directed. |
| 101 | S&F 415V, 10KA 'C' curve miniature circuit breaker (MCB) of TPN 4P , 40 To 63 Amps. capacity in the TPN DB complete with connection testing and commissioning , etc. complete all as specified and as directed. |
| 102 | S&F Sheet metal enclouser Double door(IP-43) SPN DB Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 4 way 240 Volts AC flushed in wall or fixed on surface, etc. complete all as specified and as directed. |
| 103 | S&F 32Amp 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP in the MCB DB including connection, testing and commissioning, etc. complete all as specified and as directed. |
| 104 | S&F 6 to 32Amp 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP and current carrying capacity in the MCB DB complete with connection testing and commissioning, etc. complete all as specified and as directed. |
| 105 | S&F 25 litre capacity Electric water heater(Geyser), storage type steel body with copper inner tank and heating element upto 2 KW , BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc including taking down old u/s Geaser & deposit to MES Store, etc. complete all as specified and as directed. |
| 106 | M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC type C-1 (1:3:6), 50 mm thick Pre-cast RCC type B-1 (1:2:4) as cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of soil to a distance n.exc. 50 m and including takingdown existing earthing complete, necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I , etc. complete all as specified and as directed. |
| 107 | Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for LT under ground cable/pole foundation and getting out including forming bottom surface to required level or slope, etc. complete all as specified and as directed. |
| 108 | Returning filling including spreading, leveling, watering and well ramming in layer n.exc 25cm each layer, etc. complete all as specified and as directed. |
| 109 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, etc. complete all as specified and as directed. |
| 110 | M&L for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing, etc. complete all as specified and as directed. |
| 111 | Providing sand cushioning to underground cables with a layer of sand 8 cm thick below the cable and 15 cm thick above the cable in trenches,including punning/ramming to achieve a total compacted thickness of 18 cm, etc. complete all as specified and as directed. |
| 112 | M&L for providing Sub-Class ‘B’ bricks of standard size for covering of cables, laid dry flat in trenches, etc. complete all as specified and as directed. |
| 113 | S&F 40 mm dia GI galvanised steel pipe of light grade laid in trenches or underground/under floor/under road or fixed to pole for protection of cable/earth strip, including clamps with nuts, bolts and washers, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 114 | S&F 40 mm dia GI galvanised steel pipe of light grade laid in trenches or underground/under floor/under road or fixed to pole for protection of cable/earth strip, including clamps with nuts, bolts and washers, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender