Tender For Special Repairs To Ns-118 (Vasundhara) At maintenance of (Mbi) Ghatkopar Under Cwe (Subs) Mumbai
Tender Value
1.35 Crore
Estimated cost
Bid Submission
05 Dec 2026
18 days left
EMD
2.10 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Ns-118 (Vasundhara) At maintenance of (Mbi) Ghatkopar Under Cwe (Subs) Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A', Part I (B/R WORKS)Taking down cement plaster or lime plaster on walls /ceiling of any description from concrete or brick wall etc including raking out joints, hacking for key, scrubbing down with water and disposing off the retreived debris out side MD land including necessary scaffoldings etc complete all as specified and directed |
| 2 | Taking down chowkats or frames, exc 1.5 sqm but not exc 4 Sqm each with shutters (Without taking off shutters from the frame) including taking down of hold-fasts by cutting/chasing etc from existing surfaces and also Grills/Guard bars (where exists), complete all as specified and directed. |
| 3 | Taking down chowkats or frames, not exc 1.5 sqm each with shutters (Without taking off shutters from the frame) including taking down of hold-fasts by cutting/chasing etc from existing surfaces and also Grills/Guard bars (where exists), complete all as specified and directed. |
| 4 | Taking down and refixing in the same opening shutters of any description exceeding 1 Sq.m but not exceeding 2 Sq.m each complete all as specified and directed. |
| 5 | Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each complete all as specified and directed. |
| 6 | Demolition of cement concrete in ground floors (un-reinforced) and paving not exc. 15cm thickness (below or above ground level) including removing debris outside MD land complete all as specified and directed. |
| 7 | Demolition of cement concrete (reinforced) as in roofs, shelves, chajjas, floors ( other than ground floors), beams, staircase, landing, chajjas , parapet, water tank and similar suspended work etc. and removal of rubbish/ demolished materials out of MD land complete all as specified and directed |
| 8 | Demolition of brickwork built in cement mortar including disposal of debris, etc outside MD land, complete all as specified and directed. |
| 9 | M&L for brick work with sub class B old size bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 10 | M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 11 | M & L for cement plaster 20 mm thick in CM 1:4, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/, Fosroc or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering,including using richer mix for making corners if necessary, including water proffing powder at 3 % of cement at all floors and level, including making grooves of existing size wherever required, including providing Galvanized hexagonal chicken wiremesh 19 to 22 guage at RCC & brick in joints , including cleaning the surfaces, curing etc. complete all as per specifications & as directed by the EIC note: water proofing powder will be measured and paid seperately |
| 12 | M & L for dubbing out with CM 1:4 average 15mm thick on irregular face of walls complete all as specified and directed |
| 13 | Supply only integral water proofing compound. |
| 14 | M&L for rendering 10 mm thick using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Soundp last PMC-1 of M/s Sound buildcare Pvt Ltd/ , Fosroc or other approved equivalent make, having minimum composition of C:S : 1:6 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces, etc. complete all as specified & directed by Engineer-in-Charge |
| 15 | M&L for rendering 5 mm thick on ceiling using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Soundp last PMC-1 of M/s Sound build care Pvt Ltd/ ., Fosroc or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering in ceiling, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over concrete surfaces, etc. complete all as specified & directed by Engineer-in-Charge . |
| 16 | M&L for preparation of new plastered surfaces of walls and applying Two coat of oil bound distemper including application of 3mm thick wall care putty and one coat of primer for smooth finishs using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Make - Asian/Berger or equivallent as approved by GE. |
| 17 | M&L for preparation of new plastered surfaces of ceiling and applying Two coat of oil bound distemper including application of 3mm thick wall care putty and one coat of primer for smooth finishs using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Make - Asian/Berger or equivallent as approved by GE. |
| 18 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Note: The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE. |
| 19 | M&L for fixing factory made 100% solid WPC ( Wood Polymer Composite)- Door Frame 125 mm x 65 mm double rebated, made from wood polymer composite ( single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), calcium carbonate and natural Fibers ( Wood Powdwe/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter joint after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/cbm, having good screw holding capacity ( Screw Withdrawal strenght of ( min. 990 N0, minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof , water / moisture proof & fore retardent & Fixed in position with SS Dash Fasteners / Hold fast of reuired dia and lenght , all as per specification drawing as directed by the engineer-in-charge. material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 20 | M&L for fixing factory made 100% solid WPC ( Wood Polymer Composite)- Door Frame 100 mm x 50 mm single rebated, made from wood polymer composite ( single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), calcium carbonate and natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter joint after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/cbm, having good screw holding capacity ( Screw Withdrawal strenght of ( min. 990 N0, minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof , water / moisture proof & fore retardent & Fixed in position with SS Dash Fasteners / Hold fast of reuired dia and lenght , all as per specification drawing as directed by the engineer-in-charge. material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 21 | S&F Providing factory made 30 mm thick 100% solid WPC ( Wood Polymer Composite)- Laminated Flush Door Shutter of required size comparising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), calcium carbonate and natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives, made from Extrusion process WPC foam sheet single Extruded ( inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( screw withdrawal strenght of 50 N (Face) & 1100 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof , water / moisture proof & fore retardent. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of vshutter and fixing stainless steel butt hinges (will be paid seperately ) of required size with necessary full body threaded star headed counter sunk SS screw. all as per specification drawing as directed by the engineer-in-charge. material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 22 | S&F Providing factory made 24mm thick 100% solid WPC ( Wood Polymer Composite)- JALI Door Shutter of required size comparising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), calcium carbonate and natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives, made from Extrusion process WPC foam sheet single Extruded ( inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( screw withdrawal strenght of 2000 N (Face) & 1100 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof , water / moisture proof & fore retardent. WPC JALI Door to be fixed with stainless steel wire cloth .36 mm nominal dia of wire and average width of aperature 1.10mm and fixed with stainless steel wire staples stainless steel butt hinges ( will be paid seperately) of required size with necessary full body threaded star headed counter sunk SS screws.all as per direction of engineer-in-charge. material test certificate and authentication should be compulsory provided by the manufacturing company complete : For Kitchen shutterd / Balcony & main door shutter,completed all as specified and directed. |
| 23 | S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and shown in drg for SI No. 8095 on ser page No. 160 in SSR-2010 (Pt-II), complete all as specified and directed. |
| 24 | S&F factory Made solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet with Free EPS shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing for SI No.8080 on ser page No.156 in SSR-2020 (Pt-II), complete all as specified and directed. |
| 25 | Providing and fixing factory made frame 70x 45 mm size single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 26 | Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) for cub board,kitchen cabinet,loft etc routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. |
| 27 | S&F bands, straps, supports or stays for rainwater, hold fasts etc and similar small articles made out of mild steel Flat etc of grade Fe-290 Gde - E-165 etc complete all as specified and directed. |
| 28 | M & L for PCC 1:2:4 type B1 cement concrete as in bed blocks etc for hold fasts etc including provision of necessary form work, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 29 | M & L for PCC 1:2:4 type B1 cement concrete as in bed blocks etc for hold fasts etc including provision of necessary form work, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender